SOLUTION FOUND
You must go and change build.prop lines with:
ro.build.flavor=hero2ltexx-user
ro.product.model=SM-G935F
and
ro.product.name=hero2ltexx
ro.product.device=hero2lte
Hello to everyone. Yesterday I bumped in to a problem. I had a NOTE 7 Based ROM installed (OnTheEdgeLite to be exact) and I tried to watch with my GEAR VR. When I plugged the phone I was told that I needed to run the VR Setup Wizard. I did unplugged it and tried hitted Next on the setup. A message popped up and told me that since I have a Note 7 I should stop continue using it and the Wizard stopped. Tried other Note 7 based ROMS and I had the same issue. I did some reading and I found out that OCULUS disabled VR for NOTE 7 (check here http://www.androidcentral.com/oculus-disables-gear-vr-compatibility-note-7). And I had changed before using the VR the model on build.prop (replaced SM-N930F with SM-G935F). Did anyone find a workaround? I like the Note 7 ROMs basically because battery life is much better for me. Thanks in advance
not disabled... you need to flash csc to make GEAR VR work
- tapatalked - from my VANTABLACK S7 EDGE
Perfectdevil said:
not disabled... you need to flash csc to make GEAR VR work
- tapatalked - from my VANTABLACK S7 EDGE
Click to expand...
Click to collapse
I had the same problem. But for me the solution was to edit the build.prop. I change the model to S7 Edge (SM-G935F).
Rincat said:
I had the same problem. But for me the solution was to edit the build.prop. I change the model to S7 Edge (SM-G935F).
Click to expand...
Click to collapse
Solution after all is to change other lines too. I had already changed the model and it wasn't working
You must change these:
ro.build.flavor=graceltexx-user
ro.product.model=SM-N930F
ro.product.brand=samsung
ro.product.name=graceltexx
ro.product.device=gracelte
to these:
ro.build.flavor=hero2ltexx-user
ro.product.model=SM-G935F
ro.product.brand=samsung
ro.product.name=hero2ltexx
ro.product.device=hero2lte
Related
Hey guys,
Can someone upload a copy of their build.prop? But it must be from a Galaxy Tab 4 10.1 WiFi or Galaxy Tab Pro Wifi. I only need the build id and build manufacturer, so you know what it is from the the bove devices then you dont need to upload it. I want to buy MC5 for my Tab 4 7.0 but its marked as incompatible in in the Play Store.
Sent from my Nokia Lumia 1520
Here is mine from Tab 4 10.1 Wifi
http://cloud.benzler-tec.de/public.php?service=files&t=df4f653654d2e262d72f68ea87d181f2
I believe xposed might have some modules that might work for you if the above post didn't work for you
Just finded S7 firmware download link lol
S7 Flat
S7 Edge
Someone knows how to download?
Isn't this available through the phone itself?
daLareid said:
Isn't this available through the phone itself?
Click to expand...
Click to collapse
Yes but have a system dump is a really good thing because I want port S7 rom in S5
Someone that downloaded/have S7 edge system dump? I really want it because finally I have my old laptop repaired and I want port that ROM on my S5
sarang.sss29 said:
Did you download them? It needs registration. I registered but have not received any verification email of some kind.
Click to expand...
Click to collapse
Yes the problem is that when you register and login it says that your account isn't active
sarang.sss29 said:
Anyways, here: http://www.androidsage.com/2016/03/...irmware-g930fxxu1apb6-system-dump-odexdeodex/
Click to expand...
Click to collapse
Yes I already downloaded it
Now i can work on my new ROM
It's all Exynos ?
@geiti94 said the dell 's5 kernel is compatible for Allways on S7 Display unlike S6
Help on test phone S7 edge
Stuck on S7 Edge test phone. (see attachment).
If I can get in download mode .... can I use the firmware G935FXXU1APB6_G935FXXU1APB6_G935FOLB1APB6 to let phone work as a normal S7 Edge.
Somewhere I read a test phone only works on wifi.
I would like to ask if there is a S7 rom/port for S4 i9505. If there is then please give me the link to it, if not then if any developers see this I would love if you could make one especially if it's S7 edge rom. I know there is a S7 edge marshmallow rom for S4 i9506 but it won't work on i9505 and also I know that there is something similar like the Albe95 Lollirom and Note 5 port but they are Touchwiz Android 5.x.x, and I am looking for Touchwiz 6.x.x.
Thanks
Ielite said:
I would like to ask if there is a S7 rom/port for S4 i9505. If there is then please give me the link to it, if not then if any developers see this I would love if you could make one especially if it's S7 edge rom. I know there is a S7 edge marshmallow rom for S4 i9506 but it won't work on i9505 and also I know that there is something similar like the Albe95 Lollirom and Note 5 port but they are Touchwiz Android 5.x.x, and I am looking for Touchwiz 6.x.x.
Thanks
Click to expand...
Click to collapse
I don't think there are any yet, note 3 uses cm as base I believe to get things working I'm not sure though.
Sent from my SM-G9350 using Tapatalk
The search bar in the s8 app drawer is gone and the background is completely black. Anybody else have this problem? Any idea how to fix it?
You have s8 lancher on your Samsung galaxy s7 edge or you have the samsung s8 ??
Its important !!
-If you have installed the s8 lancher to your galaxy s7 edge you can try to reinstall the apk file. But first you need to delete the s8 lancher, to do that you need to go to sittings>>apps>>>touchwiz at the right corner on the top of your screen u will see three (...) click them and then choose uninstall update. Then reinstall the apk file of s8 lancher, it would be better to get another apk file from trusted website. It should work!!!!
-if you have a galaxy s8 try to restart your galaxy, if that didn't work for you, you can factory reset your phone.
Sent from my Samsung Galaxy S7 Edge using XDA Labs
Hello. I have a Galaxy S7 edge with a Samsung account inside. When I bought it in second hand I did not see the account and the previous owner itself does not manage to remove it. How to please?
patsonator said:
Hello. I have a Galaxy S7 edge with a Samsung account inside. When I bought it in second hand I did not see the account and the previous owner itself does not manage to remove it. How to please?
Click to expand...
Click to collapse
u can find combination file and flash it,its a service firmware that's been used by samsung to check problems with devices and it can help u remove frp lock or any lock that it has.. for how to and where to find it use google and be very carefull
Wouldn't a factory reset solve it?
Sent from Samsung S7 Edge [Oreo]