Hi,
My newly bought S7 edge is having problems. I noticed that after some time, it is not possible to make any calls or use data even though the range is shown as full in the status bar.
After thorough trial and error, found that the issue is coming only if 4G/LTE is enabled. Otherwise, if i switch to 3G, it works. This is the issue for both the sim slots :crying:
Anyone else who has had this issue . I'm running the latest October patch of Android 6.0.1. Is this a software bug or a hardware issue. Any help or suggestions would be much appreciated
U can try reflashing an old firmware to discard that the update caused the problem.
alehawk said:
U can try reflashing an old firmware to discard that the update caused the problem.
Click to expand...
Click to collapse
The problem is since, it is a new phone, I don't know whether it is the update which causes the problem. I upgraded the software immediately after receiving the phone. Is anyone with the latest october update having the same issue?
I checked online, and it seems like some people have had similar issues in past. Just not sure whether it is a software issue or a hardware. And I honestly dread doing the set up again, as unlike past times (i always root my phone, but because of knox tripping, haven't rooted yet), when titanium backup was there, this would mean lots of time on re-setup
MMMmmm I only had that problem on a phone that wasnt 4g capable but had that option enabled but was because I flashed a firm that wasnt supposed to use.
If its new you can go to warranty and exchange for a new one but my curiosity will remail if it was about the october patch...
I have the same issue... it might just be a bug that will be resolved in the next update
amritpal2489 said:
I have the same issue... it might just be a bug that will be resolved in the next update
Click to expand...
Click to collapse
Oh, that's a relief. So, this issue came after updating the software. Before that, it was working for you?
Hrithan2020 said:
Oh, that's a relief. So, this issue came after updating the software. Before that, it was working for you?
Click to expand...
Click to collapse
Yes
amritpal2489 said:
Yes
Click to expand...
Click to collapse
I was finally able to get the 4G mode also working. Not exactly sure what did the trick.
Here's what I did:
1. Flashed an older version (Aug version) which I found on samfirwmare -> Didn't work
2. Flashed an even older version (July version) -> Didn't work
and then updated the software -> started working
The funny thing is the software is the same as before (the same version as was earlier - October build)
Mods, please close the thread
Hrithan2020 said:
I was finally able to get the 4G mode also working. Not exactly sure what did the trick.
Here's what I did:
1. Flashed an older version (Aug version) which I found on samfirwmare -> Didn't work
2. Flashed an even older version (July version) -> Didn't work
and then updated the software -> started working
The funny thing is the software is the same as before (the same version as was earlier - October build)
Mods, please close the thread
Click to expand...
Click to collapse
Great to see your issue is resolved
Related
Just flashed my phone via kies to JG4
Does the Optus My Account widget work?
There is a problem showing your usage....
Firmware 2.1-update1
Baseband I9000DTJG3
Kernel 2.6.29 [email protected] #2
Build: Eclair.DTJG4
hernit said:
Does the Optus My Account widget work?
Click to expand...
Click to collapse
loool, i was wondering the same thing!
JG4
spenceee said:
Just flashed my phone via kies to JG3
Click to expand...
Click to collapse
spenceee said:
There is a problem showing your usage....
Firmware 2.1-update1
Baseband I9000DTJG3
Kernel 2.6.29 [email protected] #2
Build: Eclair.DTJG4
Click to expand...
Click to collapse
Don't you mean I9000DTJG4. ie. JG4
Might like to update the thread Title.
I'm thinking of reflashing my OPTUS SGS back onto JG4 OPTUS firmware.
Wondering about my warrantee even though I bought it unlocked through an OPTUS reseller not through OPTUS.
You got it through Kies is a pretty good acheivement in itself with all the negative responses out their about Kies.
Ancient_One said:
Don't you mean I9000DTJG4. ie. JG4
Might like to update the thread Title.
I'm thinking of reflashing my OPTUS SGS back onto JG4 OPTUS firmware.
Wondering about my warrantee even though I bought it unlocked through an OPTUS reseller not through OPTUS.
You got it through Kies is a pretty good acheivement in itself with all the negative responses out their about Kies.
Click to expand...
Click to collapse
I've gotten 4 updates through Kies on the Korean phone, a guy I send PMs to on here just got an OTA update yesterday which surprised the hell out of me.
*EDIT* He is also in Korea on the Korean version. And 2 of my firmware updates might count as one since they came bundled, but I think they were separate releases and I just happened to get both at once.
I guess I am not able to update to this versoin because I flashed with JM2 ??
What if I flash with soemthing like JG1 ? Will I be able to upgrade ?
One more question, how does kies knows that it's an optus device ? Is it the IMEI or the Sim card or the current ROM ??
Thnaks
oswade said:
loool, i was wondering the same thing!
Click to expand...
Click to collapse
SAME
and plz pack it 4 us if it work
thx
Yay first update completed. now have a task manager that wasn't there before, lost all contacts and apps, is it supposed to keep these? could be annoying if have to restore from back up every time there's an update.
Did it fix the lag and GPS-issue?
Kies Sync Problem after upgrading
Hi,
I upgraded my Samsung Galaxy S to the new JG4 firmware.
I have the following builds:
Firmware 2.1-update1
Baseband I9000DTJG3
Kernel 2.6.29 [email protected] #2
Build: Eclair.DTJG4
The problem is that after upgrading Kies i can no longer connect back to my phone.
The MTP USB Device driver comes up with an error as soon as Kies fires up. The old version of Kies had no problems but the latest release has some real issues.
Any ideas would be appreciated.
Peter
Thought I'd use mybackup pro before I try out this jg4 update. I havn't rooted yet - will I still be able to backup all the app and data needed? I guess the important bit to know is - what can't I backup because I'm not on root. Probably should figure that out before backing it up and going to the update!
jamessimon said:
Yay first update completed. now have a task manager that wasn't there before, lost all contacts and apps, is it supposed to keep these? could be annoying if have to restore from back up every time there's an update.
Click to expand...
Click to collapse
Flashing your phone removes applications, contact, email and everything you hold dear hence why in most of the trheads it say's to back this up using the available backup programs.
Lost settings, contacts and apps after upgrade
I am new to Android and the SGS. Is it normal to lose everything when upgrading the firmware?
I lost everything also! This is my first time updating android firmware and coming from an iPhone I wasn't expecting it. I don't recall seeing a warning message, but I may have missed it as it took several attempts to get kies working. Searching the HDD for dll files/renaming/moving around just to get the update to work is bit much to ask!
Unfortunately it hasn't done anything to fix the GPS problems, I can't get a location after trying for an hour. Have had trouble with wifi in the past, but this seems to be resolved now.
It seems that Market is broken in this official firmware
I can't find Skies of Glory or MSN Talk Pro
It turns out that all protected applications are not shown in Market - pretty lame from Samsung.
Poor effort
Sorry Samsung, but to lose all your contacts, settings and downloaded applications while updating (and without any warning) is a very poor effort regardless of any improvements that may have been made. This is very disappointing and unprofessional and the update should be withdrawn until these problems are resolved. F grade.
Regarding Kies not connecting to the SGS. I had that problem prior to updating and tried many things to resolve it. Eventually, formating the SD card fixed this issue for me.
peterfz30 said:
Regarding Kies not connecting to the SGS. I had that problem prior to updating and tried many things to resolve it. Eventually, formating the SD card fixed this issue for me.
Click to expand...
Click to collapse
I can confirm this is the case. It would appear other applications are creating the issue on the phone with 16digit extentions or files. After an internal SD format kies worked correctly.
I have to agree with you all in theory.
Even flashing the firmware on say a Nokia phone, a message comes up asking you to backup your data prior to upgrade as you will loose it on the phone. Samsung have poorly implimented this in Kies. It will flash the firmware but give you no warning of the implications.
I guess you could also argue that this is an Android phone and not a iPhone. Things are done differently in Android then in iPhone and maybe a bit of reading might have identified that you should always back up you data prior to flashing the firmware.
That being said Kies should have an inbuilt ability to backup and restore your data and applications if they are also offering to flash the firmware.
Wish you all luck with it.
jamessimon said:
Yay first update completed. now have a task manager that wasn't there before, lost all contacts and apps, is it supposed to keep these? could be annoying if have to restore from back up every time there's an update.
Click to expand...
Click to collapse
Yep, I find this a serious serious problem without a working KIES. I don't want to be forced to surrender personal info to google. MyBackUp steals the info to the cloud even if you wanted to backup just to the storage card.
How does this compare to JM2 to those who had tried both, in terms of lag and GPS accuracy?
Rooting is not what a typical consumer will do..so how can you officially back up in android?
So samsung must had a serious bug in kies it shouldn't remove your apps.
I Odin to m2 n yes I lost all my apps but I was expecting that fair enough but from kies cmon
Though my contacts being sync to google that was ok...
Hello friends,
Something really strange has happend today, I connected my SGS to KIES and got a message saying "new firmware upgrade available"... You all can guess what was my first thought.
But no, it wasn't Froyo ,it was the same firmware that I previously had??? I really don't get what's going on, I live in Mexico, my phone was bought on UK online, and my phone CSC is from TMN (Portugal).
Not using any custom firmware, I have only rooted and installed voodoo lagfix, absolutely nothing else.
Any one else having same "upgrade" available?
By the way, this is the upgrade:
Model Name: GT-I9000
Current Version: PDA:JM8 / Phone:JM4 / CSC:JM1
Latest Version: PDA:JM8 / Phone:JM4 / CSC:JM1
Just wanted to let you know about this since I didn't found anything related in the forums today.
Cheers
I got exactly the same thing :|
Only this is a canadian SGS on canadian soil, no reg was done and it's all just the same JH2 all over the place :|
Minor fix maybe?
I confirm the same in India but should we upgrade or not??????
Same here in the UK.
PDA:JM1 / PHONE:JM1 / CSC:JM1 and I'm offered the same thing...
Really To update or not to update, that is the question...
I tried to upgrade, but my workplace's firewall keeps blocking download...
maybe it's some kind of minor update before being able to move to froyo?
tried it again and now it says latest version is installed
shreeindia said:
tried it again and now it says latest version is installed
Click to expand...
Click to collapse
Very strange. Same here.
That is strange, sounds like a false alarm... or some kind of testing from Samsung.
testing i suppose
Got this as a work phone a few weeks back, am on the Bell network in Canada. I had the same upgrade message this morning, and did upgrade.
Do not see of feel anything different, if anyone has any specific info they want me to search on the phone - let me know
Regards
GT-I9000HKDXEU e GT-I9000HKDITV donìt work
FWIW and should anyone be interested
As noted - have had the phone for about three weeks now, and it is a bone stock phone - being used on the Bell Network. I grabbed the details from the phone, as after a few hours of use, the unit does appear to be much more responsive and "quick". This of course could just be a placebo effect.
Model: GT-I9000M
Firmware: 2.1 update 1
Baseband: I9000UGJH2
Kernel: 2.6.29 [email protected] #2
Build: Eclair.UGJH2
I did not catalog the details before the upgrade - so do not know if anything has been changed.
Regards,
I don't think much has changed on your phone details, maybe you just got some system files overwritten. Did your phone language change after installing update? ,or did you loose any configuration you had previously set?
gtluis said:
I don't think much has changed on your phone details, maybe you just got some system files overwritten. Did your phone language change after installing update? ,or did you loose any configuration you had previously set?
Click to expand...
Click to collapse
Doesn't KIES basically nuke the phone and put the new firmware over, minus the internal and external SDs? As in you lose your apps and configs?
gtluis said:
I don't think much has changed on your phone details, maybe you just got some system files overwritten. Did your phone language change after installing update? ,or did you loose any configuration you had previously set?
Click to expand...
Click to collapse
All installed apps were gone - all email settings, etc were gone as well. Seemed like a new flash, had to reset my Google account info as well.
language did not change
Regards,
when I updated from JM1 to JM8 through KIES I didn't loose anything, my phone kept all apps, and configurations, but my language and other configurations got lost...
Seems like you flashed "same" firmware again, hopefully a better than you previously had, your phone's performance improvement might be due to loosing all apps.
Apart from that, everything is the same? did you loose any carrier customization? or get new apps you didn't had before?
philidor said:
GT-I9000HKDXEU e GT-I9000HKDITV donìt work
Click to expand...
Click to collapse
What's the status you received ?
No update available or this device couldn't be updated ?
I guess it's somewhat different...
Thanks
I had same offer on kies few weeks ago.. but only with “test mode on“... on the latest version of kies im not able turn test mode on anymore..
Sent from my GT-I9000 using XDA App
Val3r10 said:
What's the status you received ?
No update available or this device couldn't be updated ?
I guess it's somewhat different...
Thanks
Click to expand...
Click to collapse
with XEU Kies give me only JM1
gtluis said:
when I updated from JM1 to JM8 through KIES I didn't loose anything, my phone kept all apps, and configurations, but my language and other configurations got lost...
Seems like you flashed "same" firmware again, hopefully a better than you previously had, your phone's performance improvement might be due to loosing all apps.
Apart from that, everything is the same? did you loose any carrier customization? or get new apps you didn't had before?
Click to expand...
Click to collapse
Everything is the same - did not loose any carrier customization, no new apps. As noted, it does "seem" a bit quicker, and I do not think the two apps I had installed make the difference ( APNDroid and Vizbattery widget ) I have since re-installed the two apps, and the phone feels just as quick.
The one complaint I had from the start was the low volume on the ear piece for incoming calls. At full volume - I was having trouble hearing the people on the other end. That appears to be a bit better. I will keep an eye on that - as noted, has been my number one complaint to date.
Regards,
PS - doubt anything has really changed - probably just the fact of an update makes me think it is different / better in some way.
Folks,
I got an OTA update for the moto g. I'm on the Koodo network.
I downloaded the OTA update. Got the file from /cache.
Interesting the zip file i got has the name:
Blur_Version.173.44.9.falcon_umts.Telus.en.CA.zip
The OTA installer is telling me: 173.44.30.en.CA
The release notes had stated (can't find it now) that it has a fix for the OTG support and radio fixes like the UK and DE updates, PLUS a fix for Telus/Koodo customers that couldn't end their calls correctly.
Anyway i can't apply/update as i'm currently rooted. What are my options?
Be gentle, its my first android device.
------------------------------------------------------------------------------------------------------
Vector_Calculus said:
Folks,
I got an OTA update for the moto g. I'm on the Koodo network.
I downloaded the OTA update. Got the file from /cache.
Interesting the zip file i got has the name:
Blur_Version.173.44.9.falcon_umts.Telus.en.CA.zip
The OTA installer is telling me: 173.44.30.en.CA
The release notes had stated (can't find it now) that it has a fix for the OTG support and radio fixes like the UK and DE updates, PLUS a fix for Telus/Koodo customers that couldn't end their calls correctly.
Anyway i can't apply/update as i'm currently rooted. What are my options?
Be gentle, its my first android device.
------------------------------------------------------------------------------------------------------
Click to expand...
Click to collapse
I just updated although I'm rooted but Im using the original ROM
See this thread too: http://forum.xda-developers.com/showthread.php?t=2648590&page=13
you have to unroot
You can unroot quite easily and apply the OTA then root again.
You shouldn't loose anything: download the original ROM you are currently running (the telus 4.3) and extract the 3 parts of the system image, then flash them using fastboot.
Let me know if that's not clear enough, I'll find the Step by step instructions for you.
Just an update on the Koodo/telus patch (8.5mb)
I was originally running at 4.4.2 but after backup critical files i jumped in and rooted to get the fixed the update provided.
It worked! No issues. Root was preserved after the update.
My phone prior to update was at 4.4.2 (173.44.9) and after the update it went to 4.4.2 (173.44.30). Don't know why its not called 174.xxx like the other countries. It would nice if we all had the same patch naming schemes. Very confused tracking all the versions out there.
The fixes included:
"Fixed an issue which caused temporary cellular network loss for small number of moto G customers.
-Fixed wallpaper cropping issue
-Resolved USB OTG support issue with USB Drives
-Fixed low call volume by some users
-Fixed an issue with ending calls originated from a moto G on Telus/Koodo.
I actually the last item happened to me as both my wife and I have the motog and are on the same network.
Vector_Calculus said:
It would nice if we all had the same patch naming schemes. Very confused tracking all the versions out there.
Click to expand...
Click to collapse
Yes, the naming scheme is quite confusing, but despite the fact that my German version is 176, US version is 174 and yours is 173 after updates, obviously they got exactly the same patches as you listed. No worries.
Vector_Calculus said:
Just an update on the Koodo/telus patch (8.5mb)
I was originally running at 4.4.2 but after backup critical files i jumped in and rooted to get the fixed the update provided.
It worked! No issues. Root was preserved after the update.
My phone prior to update was at 4.4.2 (173.44.9) and after the update it went to 4.4.2 (173.44.30). Don't know why its not called 174.xxx like the other countries. It would nice if we all had the same patch naming schemes. Very confused tracking all the versions out there.
The fixes included:
"Fixed an issue which caused temporary cellular network loss for small number of moto G customers.
-Fixed wallpaper cropping issue
-Resolved USB OTG support issue with USB Drives
-Fixed low call volume by some users
-Fixed an issue with ending calls originated from a moto G on Telus/Koodo.
I actually the last item happened to me as both my wife and I have the motog and are on the same network.
Click to expand...
Click to collapse
I applied the update as well. However, my phone battery starts draining very fast, 50%+ overnight, with WiFi off. The phone seems not go to idle but running always.
xda127 said:
I applied the update as well. However, my phone battery starts draining very fast, 50%+ overnight, with WiFi off. The phone seems not go to idle but running always.
Click to expand...
Click to collapse
Battery drain is about the same as before. Maybe a factory data reset may help. I don't know if you lose root if you go this route..
xda127 said:
I applied the update as well. However, my phone battery starts draining very fast, 50%+ overnight, with WiFi off. The phone seems not go to idle but running always.
Click to expand...
Click to collapse
There is a camera bug on 4.4.2 that keeps the phone running after exiting the app. A fix is o the way...
After updating to Android 6.0.1, the phone is randomly losing mobile and gps signal. It happens about 30-40 times a day, especially when moving around, like driving . Almost every time I look at my phone, I see "No service, network not found" or "gps lost" messages. After about 10 seconds, the signal comes back and everything is ok again. Very annoying and impossible to use navigation apps, like Waze and Google Maps. I have made a soft reset, a hard reset, wiped all data and cleared the phone cache, checked and cleaned the Sim card. Nothing helps. Before update the phone worked brilliantly. Also noticed, that the signal won't drop when using wifi, the problem occurs only when data connection is on. And I'm not the only one, I have 2 friends with the same phone and the same problem. Looks like a software issue. Can somebody help?
PS. I'm from Estonia, and the software version is G901FXXU1CPE1/G901FBAL1CPE1
Thank you in advance...
Hi mate,
I Have the same device although mine uses a custom ROM but the problem I experienced was exactly like yours
Samsung released a new issue of the 6.0.1 for our phone, PDA G901FXXU1CPF6 CSC G901FPHN1CPF2 you can login to the sammobile site and download it
As I said above I have a custom ROM so I only flashed the modem firmware from that release and worked fine after that!
Hope that will help you!
Thanks for your response! But I'm using a totally stock phone and I see, that this firmware is for Netherlands. Does it work on my phone or I have to wait until the Baltic version is released?
MirandoKersman said:
Thanks for your response! But I'm using a totally stock phone and I see, that this firmware is for Netherlands. Does it work on my phone or I have to wait until the Baltic version is released?
Click to expand...
Click to collapse
Hello,
I don't see any reason why it wouldn't work but just in case make a note of your Access point name settings in the mobile networks tab just to make sure that everything is the same after you flash the new release .
If you follow the steps as described in the sammobile site you won't have any problems.
What I have noticed however is that after I flashed the new modem firmware the mobile hotspot does not work anymore but this has to do with my custom ROM.
It worth trying though the performance of the phone after that is exceptional and the signal strength is higher than before and most importantly, doesn't crash anymore..
Let me know if you need help and keep me posted about your results!
i had that ROM for a while, didnt help in my case, still same issue. I'm currently on XXU1CPG3 with which the issue still persists, gonna try flashing the new TPD CSC ROM (currently the newest) ROM Version CPH9. My baseband is still CPE1, which do you guys have?
Randi said:
i had that ROM for a while, didnt help in my case, still same issue. I'm currently on XXU1CPG3 with which the issue still persists, gonna try flashing the new TPD CSC ROM (currently the newest) ROM Version CPH9. My baseband is still CPE1, which do you guys have?
Click to expand...
Click to collapse
Baseband:
G901FXXU1CPE1, I have a totally stock phone with the latest official firmware.
Latest official firmware from where? ("latest" is region dependent)
Ok, the cph firmware updated the baseband to cph, on my side it's only been a while 14 hrs since flashing but it seems the signal problem is finally fixed
Randi said:
i had that ROM for a while, didnt help in my case, still same issue. I'm currently on XXU1CPG3 with which the issue still persists, gonna try flashing the new TPD CSC ROM (currently the newest) ROM Version CPH9. My baseband is still CPE1, which do you guys have?
Click to expand...
Click to collapse
From what I understand it doesn't matter which ROM you are using the baseband is the one that causing this problem..
As I said I have a custom ROM and when I had the CPE1 baseband then I had all these problems.
If you flashed the ROM and your baseband is still CPE1 then something did not go per plan I think..
After flashing ONLY the modem firmware from the CPF6 release to my SMG901F is reported that the baseband version is CPG2 however..
This version works for sure..
I might try the CPH9 release now to see if the issues i have with the mobile hotspot will be solved
George A. said:
From what I understand it doesn't matter which ROM you are using the baseband is the one that causing this problem..
As I said I have a custom ROM and when I had the CPE1 baseband then I had all these problems.
If you flashed the ROM and your baseband is still CPE1 then something did not go per plan I think..
After flashing ONLY the modem firmware from the CPF6 release to my SMG901F is reported that the baseband version is CPG2 however..
This version works for sure..
I might try the CPH9 release now to see if the issues i have with the mobile hotspot will be solved
Click to expand...
Click to collapse
I'll try to install that CPH9 release too. Let's see what happens, because I have tried everything else.
To me it seems, that this CPE1 version is having problems with switching between network modes. I checked, that in Settings- Mobile networks- Network mode is set to LTE/3G/2G (automatic connect), but I haven't seen H+, H or Edge symbols on top of the screen. Only 4G/4G+ or no reception at all. Like it's locked in 4G network or something. And sometimes when there is no 4G network coverage, there is also no signal. But that is just my logic...
Ok, I flashed the latest CPH9 firmware and my baseband changed to CPH3. CSC Country turned to Netherlands instead of Baltic. And it seems that the issue is fixed!
I made a little test, I went to the cellar to get bad 4G reception and instead of showing No Service, 4G turned to H without losing the cell signal. Let's wait and see...
Thank you guys a lot for your help! :good:
Hi
1) I have the latest PHN version for SM-G901f stock& rooted. I see the TPD version, will it have dutch language if i flash it ( without wipe anything) in ODIN?
2) What does TPD stand for anyway?
I want to do this because i see TPD has latest security_patch sept 1
With rooted Phone there is no way (as far as i know (3) ) to get security updates without getting the message it as screenshot given under here....
I can confirm that the issue has been fixed for me as well! ****ing finally! :cyclops:
Btw it will not switch to Dutch
MirandoKersman said:
After updating to Android 6.0.1, the phone is randomly losing mobile and gps signal. It happens about 30-40 times a day, especially when moving around, like driving . Almost every time I look at my phone, I see "No service, network not found" or "gps lost" messages. After about 10 seconds, the signal comes back and everything is ok again. I have made a soft reset, a hard reset, wiped all data and cleared the phone cache, checked and cleaned the Sim card....
PS. I'm from Estonia, and the software version is G901FXXU1CPE1/G901FBAL1CPE1
Thank you in advance...
Click to expand...
Click to collapse
I'm from Indonesia and buy used g901f from singapure,
I have same problem with marsmallow latest update too
My software version is G901FXXU1CPH3/G901FOLB1CPH1/G901FXXU1CPH1
How to fix it? Step by step..
Thank you before..
*) sorry for my bad english
---------- Post added at 01:43 AM ---------- Previous post was at 01:36 AM ----------
Randi said:
I can confirm that the issue has been fixed for me as well! ****ing finally! :cyclops:
Btw it will not switch to Dutch
Click to expand...
Click to collapse
Pliss help me with step to fix it
Hello! It seems all the firmwares ending with CPE1/CPH1 are problematic. You can try some other firmware from http://www.sammobile.com/firmwares/database/SM-G901F/
Select the firmware what seems best for you, don't select the operator-based ones, like vodafone etc. If you click on the firmware and scroll the page down, you will see step-by-step instructions how to install it. Good luck!
Ok but i can't found latest country band FW have same with indonesia network (except FW country singapure now i using it)
So i'll try to download FW update 2016-09-03
Country Unknown
Build date Tue, 13 Sep 2016
Security Patch Level 2016-09-01
Product code ORL
PDA G901FXXS1CPI4
CSC G901FORL1CPF1
Samsung Galaxy S8+ Duos SM-G955FD just got updated to Android 9.0 Pie. My S8+ is unlocked and sourced from UAE.
I checked the update manually and installed it when it showed update available.
View attachment 4712674
In India also I recieved it two days back.
Phone is more snappier, fluidic and looks cool with the OneUI interface.
In sweden anyone recieved the update? CSC is VDS
smarius92 said:
In sweden anyone recieved the update? CSC is VDS
Click to expand...
Click to collapse
Yes got it yesterday. Try connecting to PC and run smart switch. I started downloading but it terminated prematurely. I then found and downloaded the update through OTA.
Nothing for U series, not even a beta >.<
I'm in the UK with a G955FD. The download has now become available. I may not install it as I like the facility to record calls, not possible with 9.0. I might prefer to wait for a custom ROM based on 9.0 with the facility restored.
ukmaps4us said:
I'm in the UK with a G955FD. The download has now become available. I may not install it as I like the facility to record calls, not possible with 9.0. I might prefer to wait for a custom ROM based on 9.0 with the facility restored.
Click to expand...
Click to collapse
I'm in UK too got 955F still nothing
I have my Telcel S8+ from mexico flashed with the MXO unlocked version and i got the update by OTA but when i try to install it gets an error at 32% this is not the first OTA update that i install but why i got this thime the error? i read that the "32% error" it's for something with the CSC but i used a compilation file to instal the MXO CSC so everithing getsworking i even have samsung pay and everithing working fine, somebody help
Update received in India
Version - G955FXXU4DSBA
Size - 1610.26 MB
What's New - Upgraded One UI for Android Pie
I have not installed it yet as I am skeptical about performance issues after installing it. Those who have installed it, Can you please share your experience so far? Are you facing any kind of issues?
My friend installed it on S9 Plus and it botched his Contacts List Completely. Any such issues in S8 Plus?
UI 1.1
I have a question whether S8 + gets an update to UI 1.1 or that samsung does not issue any UI interface updates.
cardi77 said:
I have a question whether S8 + gets an update to UI 1.1 or that samsung does not issue any UI interface updates.
Click to expand...
Click to collapse
It does get the new OneUI update if that's what you're asking.
L3R0N said:
It does get the new OneUI update if that's what you're asking.
Click to expand...
Click to collapse
Yes thanks a lot
L3R0N said:
It does get the new OneUI update if that's what you're asking.
Click to expand...
Click to collapse
Well, so far after the last March act. is not. I don't believe that much: / don't you know how S9 + is? if you have 1.1 UI?
Batterylife is absolute crap on Pie.
Uses 30% more battery in a day than on previous firmware.
Sindroid said:
Batterylife is absolute crap on Pie.
Uses 30% more battery in a day than on previous firmware.
Click to expand...
Click to collapse
have you done a factory reset? this is a major update. i would always do one when going up a whole version. most people i have seen including myself and all of my close friends have been amazed at how great the battery is. if you havent done a reset yet there is really no reason to claim it has bad battery. there are so many things that can get messed up with a big ota. if that is how you got it anyway.
I have in Ireland
cardi77 said:
I have a question whether S8 + gets an update to UI 1.1 or that samsung does not issue any UI interface updates.
Click to expand...
Click to collapse
I installed this on my t-mobile unlocked phone and it is now locked again and there is no way I can unlock it. the tmobile unlock up does not work. Anyone with this problem? any newer version that G955USQU5DRL7. Tmobiule even if I am customer after many calls cannot help since I am running pie
maometto75 said:
I installed this on my t-mobile unlocked phone and it is now locked again and there is no way I can unlock it. the tmobile unlock up does not work. Anyone with this problem? any newer version that G955USQU5DRL7. Tmobiule even if I am customer after many calls cannot help since I am running pie
Click to expand...
Click to collapse
I do not understand what you are asking ... I installed the last update and everything works as it is just the version of UI is still 1.0 which I thought might already give 1.1 but this probably won't get S8 +
I upgraded this week and it's been a pain, split screen stopped working so factory reset, about 4 hours after the reset the same happened again ,reset again solved that but now status bar has disappeared, so can only check the battery by swiping down. Just wish I could downgrade ! Leave it a while before upgrading would be my advice.
Can't agree with that. Running latest u1 beta and it is pretty much flawless. daily driver all day.
Sent from my SM-G955U1 using Tapatalk