Database Users

[$145][Bounty to Port] Samsung Galaxy 10.1 w/ TouchWiz

http://www.r2doesinc.bitsurge.net/omftab-1.zip
Figured I'd make the I formation a little more available as this was buried in a thread.
A bootable Asus Transformer port of the latest Galaxy 10.1 rom with touchwiz. Needs some TLC. Currently has no working wifi or rotation sensors.
Lets get this cooking. I am no dev, only looking to make this public here on xda. The current dev is done with it and too busy to continue. Any other devs able to whip something up with this?
Problems:
Constant Battery Temp Warning every few minutes
Wifi does not work (can work by using Rom 1.0.2 + #16 kernel)
GSensor does not work (rotation widget helps)
Camera does not work
No Graceful shutdown (long press power to turn off)
List of Donators to make this happen
Player911 - $20
haensgn - $10
Anonymous - $100
Husher - $15
​
How to Flash
You'll need to download both, the Galaxy Rom port and a Transformer Kernel, to a microSD card. You'll have to flash via ClockWorkMod Recovery.
Working WiFi works using Galaxy Rom 1.0.2 + Version 16 of Clemsyn's Kernel.
Galaxy Rom Port:
Galaxy Rom 1.0.4
Galaxy Rom 1.0.2 (Required for working WiFi)
Kernels:
Clemsyn Version 17 (didn't enable WiFi for me)
OR
Clemsyn Version 16 (Required for working WiFi)
Instructions
Throw the rom and kernel to the microSD card and boot into Clockworkmod Recovery (Start with TF off. Hold Vol-Down and Power. Then Vol-Up at Logo)
Perform a Nandroid Backup
Factory Reset
Flash zip from SD > Select Galaxy Rom
Flash zip from SD > Kernel
Reboot.
Enjoy.
Donate to Clemsyn for his Kernels

This makes the xformer into an actual galaxy tab rom? Guessing u wouldnt know if flash is 30fps in 720p due to.no wifi correct/?

You would need wifi to test that because I doubt BT teather works
sent from Christ All Mighty

cant wait to see this just bought the transformer today and I'm lovin it!!!!

cowballz69 said:
This makes the xformer into an actual galaxy tab rom? Guessing u wouldnt know if flash is 30fps in 720p due to.no wifi correct/?
Click to expand...
Click to collapse
The issue has already been fixed,
you just have to uninstall Flash and reinstall it

andyxover said:
The issue has already been fixed,
you just have to uninstall Flash and reinstall it
Click to expand...
Click to collapse
Thats already been done buddy its still throwing 9fps

cowballz69 said:
Thats already been done buddy its still throwing 9fps
Click to expand...
Click to collapse
no first you must install the hacked hulu version then uninstall it then then install marketverion then flash at 30fps will work
Sent from my Transformer TF101 using Tapatalk

Is someone working on the wifi issue? I mean has someone taken to the challenge

Once the port is successful, will it include the video drivers/codecs that the samsung galaxy 10.1 tab has?

nicknowsky said:
Is someone working on the wifi issue? I mean has someone taken to the challenge
Click to expand...
Click to collapse
Flash the clemsyn kernel and wifi will work.

aibo said:
Flash the clemsyn kernel and wifi will work.
Click to expand...
Click to collapse
Really ?? is it that simple ?

I have a go at it.. my transformer need some new roms

DocRambone said:
I have a go at it.. my transformer need some new roms
Click to expand...
Click to collapse
Oooh, you've got a Transformer? Loved your work on the Galaxy S!

Putzy said:
Oooh, you've got a Transformer? Loved your work on the Galaxy S!
Click to expand...
Click to collapse
Yes, not to happy about it tho.
Build q is not to good, but i guess with a case i don't need to see it.
The 3.1 android is way to slow.
Lets see what can be done.

nordicfastware said:
Really ?? is it that simple ?
Click to expand...
Click to collapse
Yes. You can even flash the acer port and then the clemsyn kernel.

Soo this is ready to be flashed to the transformer?The bugs that you posted are cleared up?If so cool beans,ill flash this today.

nordicfastware said:
Really ?? is it that simple ?
Click to expand...
Click to collapse
Yea it worked for me as well, I even mentioned it the other 2 port threads lol

DocRambone said:
I have a go at it.. my transformer need some new roms
Click to expand...
Click to collapse
DocRambone said:
Yes, not to happy about it tho.
Build q is not to good, but i guess with a case i don't need to see it.
The 3.1 android is way to slow.
Lets see what can be done.
Click to expand...
Click to collapse
Yeah we are in some desperate need of some real ROMs! The Dev'n has slowed down a lot
Hopefully Doc you can work some real magic. You're right Ive noticed 3.1 seems slow. I know I know nobody wants to hear it, but lately my iPad 2 is looking better and better. I dunno nobod has nailed it yet, but I hear the new Toshiba Tablet might just be the one. Honeycomb needs some real help

better than 3.1?
daweeze02 said:
Yea it worked for me as well, I even mentioned it the other 2 port threads lol
Click to expand...
Click to collapse
In your opinion is this ROM running smoother than the custom 3.1 ROMs out there?

aibo said:
Yes. You can even flash the acer port and then the clemsyn kernel.
Click to expand...
Click to collapse
Is it the Virtuous galaxy rom in Acer Iconia Xda thread you mean? And is that fully functional, with auto rotation and so on working?

[Q] ROM with USB Host support?

I have searched for 2 days trying to find a ROM that supports USB Host control. Does anyone know one that does? Like I said, Ive had no luck.
Thank you in advance for your assistance!!
Doug

DougP123 said:
I have searched for 2 days trying to find a ROM that supports USB Host control. Does anyone know one that does? Like I said, Ive had no luck.
Thank you in advance for your assistance!!
Doug
Click to expand...
Click to collapse
Try CM7.2 stable.
http://download.cyanogenmod.org/?device=encore&type=stable

hwong96 said:
Try CM7.2 stable.
http://download.cyanogenmod.org/?device=encore&type=stable
Click to expand...
Click to collapse
Currently I have CM10.2.1 installed, Can I simply flash 7.2, going backwards?

DougP123 said:
Currently I have CM10.2.1 installed, Can I simply flash 7.2, going backwards?
Click to expand...
Click to collapse
You will need a gingerbread GAPPS http://goo.im/gapps//gapps-gb-20110828-signed.zip. Since you will be moving from JB to GB you probably should wipe dalvik and data. Back up your apps and data with Titanium Backup before proceding,

I also am running 10.2, would love to have usb host support. So is this hopeless? I've haven't checked here in a while, wondered if maybe a kernel patch had made it to the masses for the newer roms...

22jjones said:
I also am running 10.2, would love to have usb host support. So is this hopeless? I've haven't checked here in a while, wondered if maybe a kernel patch had made it to the masses for the newer roms...
Click to expand...
Click to collapse
You may want to read this
http://forum.xda-developers.com/showpost.php?p=49944789&postcount=3985

Good info, thanks. To be honest, I'm amazed we've come this far with these old devices.

Does anyone have any back-up ROMS with USB Host supporting? My NC with dead touch screen, I need a USB mouse support CM to make it alive. Thanks.

[Q] 4.4.2 MIUI V5 using SafeStrap? SM-N900V

Has anyone been able to install the 4.4.2 MIUI V5 (Touchwiz version) on the SM-N900V using SafeStrap?

Link to thread? I'm curious if it's dev or re
Edit: found their site. Can't really find info on the release. Doesn't like my browser I'm using

bmwh0r3 said:
Link to thread? I'm curious if it's dev or re
Edit: found their site. Can't really find info on the release. Doesn't like my browser I'm using
Click to expand...
Click to collapse
If don't wanna post a link that is not part of this site. but if you google MIUI v5 NOTE 3 SM-N900V you will find a video..

Found it... safestrap is on his home screen... hmm... and it is tw based... would I brick my phone on a rom slot? So tempted to test. Gotta get my backup phone just in case. Downloading the rom now...

bmwh0r3 said:
Found it... safestrap is on his home screen... hmm... and it is tw based... would I brick my phone on a rom slot? So tempted to test. Gotta get my backup phone just in case. Downloading the rom now...
Click to expand...
Click to collapse
Yes, downloaded it too and gonna see if i can get it to install.. let you know

Am about halfway done. Visiting my dad and agonizingly slow dsl service driving me crazy. Have cable at home. 105mb> 3mb

See post 2 it may help with safestrap
http://forum.xda-developers.com/showthread.php?t=2062060

If it is using the stock touchwiz kernel then yes it should work.

uggg
The MIUI rom I got, failed during install it says it for ha3h devices and this is a kltevzw... If anyone finds a rom for this device please advise.

So don't install?

bmwh0r3 said:
So don't install?
Click to expand...
Click to collapse
I am trying the one off the miui site listed as Samsung Note 3, let you know in a few how it goes. I dont think it is for the Verizon Note..
It is a new file than I tried to flash before..

Maybe it has to be on the stock slot. I'm not willing enough to test that lol

NO GO
bmwh0r3 said:
Maybe it has to be on the stock slot. I'm not willing enough to test that lol
Click to expand...
Click to collapse
It is for the international version SM-N900 not SM-N900V so as of right now, I can not find one for our version.
So don't flash it does not work!

That sucks. I'm okay though. Diggin biggins rom right now lol

Yea it is not wise to flash international roms on our devices...that is asking for a brick.

Wonder if it's possible to port one of the TouchWiz based ones over...

ginger man said:
Wonder if it's possible to port one of the TouchWiz based ones over...
Click to expand...
Click to collapse
I thought the same thing but I'm no Dev.

bmwh0r3 said:
I thought the same thing but I'm no Dev.
Click to expand...
Click to collapse
Well shoot, looks like it's for the international version which uses a different chipset. So don't get your hopes up.

Looking for a rom that still has S-Pen functionality but on stock Android?

Hey,
been a while since I been here(from back in the days of my Galaxy Nexus). I just picked up a Note 4. I like it. I somewhat dislike the TouchWiz and hate how out of box it's using 1.8-2GB of ram on start up(assuming because of TouchWiz).
Is there any roms out there that run practically stock Android(pref. 5.0 Lollipop?) but still have the S-Pen suite enabled, including the part when I pull my S-Pen out it notices it and gives me that "Air command" menu.
One last plus would be something that gives me the ability to still use fast charge 2.0.
I looked up a couple of roms but unless I missed something they don't offer these features.
Any help? I have the Canadian N910W8 model and use it on Band 4 AWS/UMTS(3G) and LTE on various freq's so the radio would(should, preferably stay in-tacked)
Thanks!

I don't think this belongs in this section man, maybe ask it in the Q and A. It will probably get moved.
On answering your question, at this stage there is no stock aosp rom that supports spen functions. It's a little bit of a dream for most users. Although I hear that lollipop will be faster than stock, that's what I've read.

Lambetts said:
I don't think this belongs in this section man, maybe ask it in the Q and A. It will probably get moved.
On answering your question, at this stage there is no stock aosp rom that supports spen functions. It's a little bit of a dream for most users. Although I hear that lollipop will be faster than stock, that's what I've read.
Click to expand...
Click to collapse
That's wrong. There is S-Pen functionality in cm12 at this moment. All you have to do is download and install one or two apps from Play Store. This apps are even free.
It is CM S-Pen en Note Buddy. I have installed them myself and S-Pen does work.

Found this the other day https://play.google.com/store/apps/details?id=com.steadfastinnovation.android.spenlauncher&hl=en
Im running cm12 with the following
s pen launcher
cm s pen add on
note buddy
papyrus
this gives me basic s pen functions but is more than adequate for my needs

Planet X said:
That's wrong. There is S-Pen functionality in cm12 at this moment. All you have to do is download and install one or two apps from Play Store. This apps are even free.
It is CM S-Pen en Note Buddy. I have installed them myself and S-Pen does work.
Click to expand...
Click to collapse
You are not entirely right either. There are free versions of this apps, but for full functionality you have to pay, not that there is anything wrong with it, just stating the fact. Also you have some s-pen functionality, but not all of it, and in my opinion CM12 s-pen functionality is somewhat less fluent and intuitive then TW one. Regardless, I still prefer CM than TW
I would also like to know how is this thread relevant to Development section

Planet X said:
That's wrong. There is S-Pen functionality in cm12 at this moment. All you have to do is download and install one or two apps from Play Store. This apps are even free.
It is CM S-Pen en Note Buddy. I have installed them myself and S-Pen does work.
Click to expand...
Click to collapse
Be careful throwing around the word 'wrong'. I did say as far as I know, just trying to help someone out. There is apps you can use with cm or some other aosp roms, but it's nothing like the spen features you get from within TW. Not that I'm a big fan of it myself, I have quite a few gripes myself, *cough* performance... But for the multi window and spen features, presently if you use them all, TW is it for now.
---------- Post added at 10:43 AM ---------- Previous post was at 10:43 AM ----------
torquadon said:
You are not entirely right either. There are free versions of this apps, but for full functionality you have to pay, not that there is anything wrong with it, just stating the fact. Also you have some s-pen functionality, but not all of it, and in my opinion CM12 s-pen functionality is somewhat less fluent and intuitive then TW one. Regardless, I still prefer CM than TW
I would also like to know how is this thread relevant to Development section
Click to expand...
Click to collapse
Your exactly right dude, and I'm wondering when this will be moved too... Haha.

dc2000 said:
Hey,
been a while since I been here(from back in the days of my Galaxy Nexus). I just picked up a Note 4. I like it. I somewhat dislike the TouchWiz and hate how out of box it's using 1.8-2GB of ram on start up(assuming because of TouchWiz).
Is there any roms out there that run practically stock Android(pref. 5.0 Lollipop?) but still have the S-Pen suite enabled, including the part when I pull my S-Pen out it notices it and gives me that "Air command" menu.
One last plus would be something that gives me the ability to still use fast charge 2.0.
I looked up a couple of roms but unless I missed something they don't offer these features.
Any help? I have the Canadian N910W8 model and use it on Band 4 AWS/UMTS(3G) and LTE on various freq's so the radio would(should, preferably stay in-tacked)
Thanks!
Click to expand...
Click to collapse
I have the same phone as you. So far LiquidSmooth and the Unofficial CM-12.0 are the only Lollipop builds that can even use the S-Pen (Unless you know of others). You won't get the TW features of course. I'm very slowly looking into building a AOSP Lollipop rom that is custom built for our N910W8 devices. I've never built my own before so it is a lot of learning.

airwa1kin7 said:
I have the same phone as you. So far LiquidSmooth and the Unofficial CM-12.0 are the only Lollipop builds that can even use the S-Pen (Unless you know of others). You won't get the TW features of course. I'm very slowly looking into building a AOSP Lollipop rom that is custom built for our N910W8 devices. I've never built my own before so it is a lot of learning.
Click to expand...
Click to collapse
Liquid?! :what::what::what:
Where..?

Vangelis13 said:
Liquid?! :what::what::what:
Where..?
Click to expand...
Click to collapse
http://forum.xda-developers.com/note-4-tmobile/development/rom-liquismooth-v4-0-alpha-t2980543

dc2000 said:
hate how out of box it's using 1.8-2GB of ram on start up(assuming because of TouchWiz).
Click to expand...
Click to collapse
It *should* be doing that. Unused RAM is wasted RAM. It's caching stuff for speed so that the next time it needs to load up something, it can check if it still is in RAM already. It's not a TouchWiz thing.

airwa1kin7 said:
http://forum.xda-developers.com/note-4-tmobile/development/rom-liquismooth-v4-0-alpha-t2980543
Click to expand...
Click to collapse
Bummer, only for a particular model.. Hopefully they'll include other models soon!
Thanks for the hint.

Vangelis13 said:
Bummer, only for a particular model.. Hopefully they'll include other models soon!
Thanks for the hint.
Click to expand...
Click to collapse
You can still install it on other versions of the Note 4. Just expect some things not to work. If your running the CAN version of the Note 4 I don't recommend using LS atm due to very poor battery life on this model.

airwa1kin7 said:
You can still install it on other versions of the Note 4. Just expect some things not to work. If your running the CAN version of the Note 4 I don't recommend using LS atm due to very poor battery life on this model.
Click to expand...
Click to collapse
Interesting. I have the 910F, will dig in to the thread & see what gives. Thanks once again!

Vangelis13 said:
Interesting. I have the 910F, will dig in to the thread & see what gives. Thanks once again!
Click to expand...
Click to collapse
Not a problem!

Has anyone tried converting all the original s-pen apps to user apps with titanium backup, and then doing an app and data backup of them from the stock ROM, installing CM12, and then try to install them?
I'd try it myself, but I'm asking on behalf of a mate, not for myself. I think there's a possibility that it might work. It's gotta be worth a try..
I've got CM12 on my S4, and it's awesome.

Now the omega touchwiz rom are released:
imo the best rom and all features would work like in stock.
try i..maybe what you seeking?
http://omegadroid.co/category/news/

Misk77 said:
Now the omega touchwiz rom are released:
imo the best rom and all features would work like in stock.
try i..maybe what you seeking?
http://omegadroid.co/category/news/
Click to expand...
Click to collapse
KitKat though isn't it? No Android 5 version yet, is there? Thanks

knuckles1978 said:
KitKat though isn't it? No Android 5 version yet, is there? Thanks
Click to expand...
Click to collapse
Changelog:
Based on firmware XXU1ANK4 Android 4.4.2 (Date: 17/11/2014)
Stock kernel XXU1ANK4 … same mods and tweaks with S5 Omega Rom
(Full changelog soon at xda soon)
Rom is Deodexed + Rooted + Zipaligned
Installation Instructions:
1. Backup your device (nadroid backup, titanium backup, efs backup … etc) and save the backup to a safe place.
2. Flash Stock XXU1ANK4 Samsung Kit Kat firmware with odin
This step is not needed if you already have XXU1ANK4 Samsung Kit Kat firmware on your device
3. Boot to recovery, and Install Omega rom with Full Wipe.
Read more at http://omegadroid.co/omega-rom-galaxy-note-4-n910f-v1-0-kit-kat-4-4-4-released/#qXbOBTeFo1DgmxsI.99
Hasnt tried this one yet but i love omega roms.
cant understand if i can ;
i currently got ANDROID 4.4.4 xxu1ANJA living in europe/sweden. , Flash Stock XXU1ANK4 Samsung Kit Kat firmware with odin? can i flash edge on note 4 n910f? hmm

Really looking for a lollipop ROM, but thanks anyway.
You should try lollipop out too. I guarantee you'll not want to go back to KitKat if you do..

knuckles1978 said:
Really looking for a lollipop ROM, but thanks anyway.
You should try lollipop out too. I guarantee you'll not want to go back to KitKat if you do..
Click to expand...
Click to collapse
How do we do that? I haven't found a note 4 lollipop tw rom anywhere? Apart from an unstable unofficial cm rom.

Android 6 for Blue Vivo Air LTE ?

Anybody knows if there is a 6er update for the LTE Qualcomm Version?
Maybe for a similar build, Tornado Fly?
cheers

As I see your device has Snapdragon 410, I can try to port a Custom ROM or a Custom recovery if you want

processor info in "about device" says Qualcomm MSM8916
current build is BLU_V0010UU_V13_Generic with android 5.0.2
Kernel 3.10.49

That's nice. Is your device rooted?
Do you have any experience in flashing custom roms/custom recoveries?

i did root it, dont know which method i used,
tried to put on a trwp, but didnt find a version that worked as i recall..
so how would it work, do you have a FW for the phone?

schlunk said:
i did root it, dont know which method i used,
tried to put on a trwp, but didnt find a version that worked as i recall..
so how would it work, do you have a FW for the phone?
Click to expand...
Click to collapse
I probably will port TWRP from a similar device that has MSM8916.
And no, I don't have the firmware (i'll research soon) neither the phone.

oh, ok. but twrp without a matching 6er rom wouldnt help me much
but thanks for trying to help!

schlunk said:
oh, ok. but twrp without a matching 6er rom wouldnt help me much
but thanks for trying to help!
Click to expand...
Click to collapse
it's okay. after TWRP, I can try to port an android 6 based ROM

does this make sense if you dont have the phone to test it on??
should be pretty buggy with lots of stuff not working, i guess, like with all other custom roms?

schlunk said:
does this make sense if you dont have the phone to test it on??
Click to expand...
Click to collapse
not really, but I do everything if you want a custom rom haha
schlunk said:
should be pretty buggy with lots of stuff not working, i guess, like with all other custom roms?
Click to expand...
Click to collapse
as for msm8916 it shouldn't have much bugs

im not an expert, but all custom roms have issues? like different stuff not working, camera, lte, blutooth etc..
hard to believe if you take like lineage or something and porting it on a specific phone, everything will work ??
thank for trying to help, but i dont really have time for testing. if youre saying everything will work out of the box, i will gladly take it

schlunk said:
im not an expert, but all custom roms have issues? like different stuff not working, camera, lte, blutooth etc..
hard to believe if you take like lineage or something and porting it on a specific phone, everything will work ??
thank for trying to help, but i dont really have time for testing. if youre saying everything will work out of the box, i will gladly take it
Click to expand...
Click to collapse
yeah, all custom roms have issues, but it's pretty easy to fix on msm8916 chipsets. there are a lot of guides where you can fix these bugs