Database Users

[$145][Bounty to Port] Samsung Galaxy 10.1 w/ TouchWiz

http://www.r2doesinc.bitsurge.net/omftab-1.zip
Figured I'd make the I formation a little more available as this was buried in a thread.
A bootable Asus Transformer port of the latest Galaxy 10.1 rom with touchwiz. Needs some TLC. Currently has no working wifi or rotation sensors.
Lets get this cooking. I am no dev, only looking to make this public here on xda. The current dev is done with it and too busy to continue. Any other devs able to whip something up with this?
Problems:
Constant Battery Temp Warning every few minutes
Wifi does not work (can work by using Rom 1.0.2 + #16 kernel)
GSensor does not work (rotation widget helps)
Camera does not work
No Graceful shutdown (long press power to turn off)
List of Donators to make this happen
Player911 - $20
haensgn - $10
Anonymous - $100
Husher - $15
​
How to Flash
You'll need to download both, the Galaxy Rom port and a Transformer Kernel, to a microSD card. You'll have to flash via ClockWorkMod Recovery.
Working WiFi works using Galaxy Rom 1.0.2 + Version 16 of Clemsyn's Kernel.
Galaxy Rom Port:
Galaxy Rom 1.0.4
Galaxy Rom 1.0.2 (Required for working WiFi)
Kernels:
Clemsyn Version 17 (didn't enable WiFi for me)
OR
Clemsyn Version 16 (Required for working WiFi)
Instructions
Throw the rom and kernel to the microSD card and boot into Clockworkmod Recovery (Start with TF off. Hold Vol-Down and Power. Then Vol-Up at Logo)
Perform a Nandroid Backup
Factory Reset
Flash zip from SD > Select Galaxy Rom
Flash zip from SD > Kernel
Reboot.
Enjoy.
Donate to Clemsyn for his Kernels

This makes the xformer into an actual galaxy tab rom? Guessing u wouldnt know if flash is 30fps in 720p due to.no wifi correct/?

You would need wifi to test that because I doubt BT teather works
sent from Christ All Mighty

cant wait to see this just bought the transformer today and I'm lovin it!!!!

cowballz69 said:
This makes the xformer into an actual galaxy tab rom? Guessing u wouldnt know if flash is 30fps in 720p due to.no wifi correct/?
Click to expand...
Click to collapse
The issue has already been fixed,
you just have to uninstall Flash and reinstall it

andyxover said:
The issue has already been fixed,
you just have to uninstall Flash and reinstall it
Click to expand...
Click to collapse
Thats already been done buddy its still throwing 9fps

cowballz69 said:
Thats already been done buddy its still throwing 9fps
Click to expand...
Click to collapse
no first you must install the hacked hulu version then uninstall it then then install marketverion then flash at 30fps will work
Sent from my Transformer TF101 using Tapatalk

Is someone working on the wifi issue? I mean has someone taken to the challenge

Once the port is successful, will it include the video drivers/codecs that the samsung galaxy 10.1 tab has?

nicknowsky said:
Is someone working on the wifi issue? I mean has someone taken to the challenge
Click to expand...
Click to collapse
Flash the clemsyn kernel and wifi will work.

aibo said:
Flash the clemsyn kernel and wifi will work.
Click to expand...
Click to collapse
Really ?? is it that simple ?

I have a go at it.. my transformer need some new roms

DocRambone said:
I have a go at it.. my transformer need some new roms
Click to expand...
Click to collapse
Oooh, you've got a Transformer? Loved your work on the Galaxy S!

Putzy said:
Oooh, you've got a Transformer? Loved your work on the Galaxy S!
Click to expand...
Click to collapse
Yes, not to happy about it tho.
Build q is not to good, but i guess with a case i don't need to see it.
The 3.1 android is way to slow.
Lets see what can be done.

nordicfastware said:
Really ?? is it that simple ?
Click to expand...
Click to collapse
Yes. You can even flash the acer port and then the clemsyn kernel.

Soo this is ready to be flashed to the transformer?The bugs that you posted are cleared up?If so cool beans,ill flash this today.

nordicfastware said:
Really ?? is it that simple ?
Click to expand...
Click to collapse
Yea it worked for me as well, I even mentioned it the other 2 port threads lol

DocRambone said:
I have a go at it.. my transformer need some new roms
Click to expand...
Click to collapse
DocRambone said:
Yes, not to happy about it tho.
Build q is not to good, but i guess with a case i don't need to see it.
The 3.1 android is way to slow.
Lets see what can be done.
Click to expand...
Click to collapse
Yeah we are in some desperate need of some real ROMs! The Dev'n has slowed down a lot
Hopefully Doc you can work some real magic. You're right Ive noticed 3.1 seems slow. I know I know nobody wants to hear it, but lately my iPad 2 is looking better and better. I dunno nobod has nailed it yet, but I hear the new Toshiba Tablet might just be the one. Honeycomb needs some real help

better than 3.1?
daweeze02 said:
Yea it worked for me as well, I even mentioned it the other 2 port threads lol
Click to expand...
Click to collapse
In your opinion is this ROM running smoother than the custom 3.1 ROMs out there?

aibo said:
Yes. You can even flash the acer port and then the clemsyn kernel.
Click to expand...
Click to collapse
Is it the Virtuous galaxy rom in Acer Iconia Xda thread you mean? And is that fully functional, with auto rotation and so on working?

[Q]USB Host with CyanogenMod7

Hi
I see USB host now works on ICS based roms, but what about CM7? More specifically TyphooN CyanogenMod 7. The reason I ask is because I want to test USB class Audio devices, and there is no point in me getting a USB DAC if the groundwork is not laid down.
I know CM7 supports USB class audio, but whether the ALSA drivers are used in this build is beyond me.
Note: It is quite important because Manufacturers like Fiio are investigating making products specifically for modded android phones that support this - sort of like the VentureCraft Go-Dap and the iphone.
Thanks

liiochen said:
It also support CM7.
But , you need compile it yourself.
source code & patch:
http://rerede.com/hotpointer/linux-os/05274535.html
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=26994641&postcount=146

mengfei said:
http://forum.xda-developers.com/showpost.php?p=26994641&postcount=146
Click to expand...
Click to collapse
Thanks! now I just need to find a way to ask tytung to put it in his kernel.... so it can filter through to my Typhoon CM7 rom

Any progress on this? i don't see it filtering through to any kernels or ROMS officially?
on either 2.3.x or 4.0.x, Or is it due to the ADB errors it causes?

Trying to port JB ROM

Hey guys.
I am new to android developing.
I started by porting the CM10.1 ROM from HTC Desire, but my phone is stuck at the Huawei logo when it boots up.
I can still flash another ROM, but that is not the problem.
I want to know how to fix this. I want it to go past the Huawei Logo.
By the way, I used this procedure: http://forum.xda-developers.com/showthread.php?t=1598713 and I used Aurora ICS 5.0 for the base ROM. I know it doesn't have the same version of android, but there is no reason I shouldn't be experimenting like this.
Can anyone help?
Thanks.

rqmok said:
Hey guys.
I am new to android developing.
I started by porting the CM10.1 ROM from HTC Desire, but my phone is stuck at the Huawei logo when it boots up.
I can still flash another ROM, but that is not the problem.
I want to know how to fix this. I want it to go past the Huawei Logo.
By the way, I used this procedure: http://forum.xda-developers.com/showthread.php?t=1598713 and I used Aurora ICS 5.0 for the base ROM. I know it doesn't have the same version of android, but there is no reason I shouldn't be experimenting like this.
Can anyone help?
Thanks.
Click to expand...
Click to collapse
Delete phone.apk and try it?
Sent from my U8800-51

You can't port CM10.1 ROM to ICS ROM as base. That is inpossible.

I know
Mlopik said:
You can't port CM10.1 ROM to ICS ROM as base. That is inpossible.
Click to expand...
Click to collapse
I know, but it is not completely impossible.
I also tried to port it with CM10.1 that you are trying to fix, but I still get the same thing.
I will setup logcat and upload the information here.
Thanks.

Need to ask something
Hey again.
I haven't had time to do anything to my phone yet.
I am replying to ask if there is an awesome tutorial out there that could help me with this porting?
Currently, to port my ROM, I replaced files in port ROM from base ROM. Should I replace files in base ROM from port ROM?
Thanks for the help.

Hi Again
Hello.
I found out that there was a problem with the base ROM.
I have ported CM10.1 from U8800! Yaay!
But there are four things that are not working:
- WiFi
- Bluetooth
- Cam Recording
- Sound
Can you guys tell me how to fix the audio? In the logcat, it says that there is no sound output.
Thanks

CatLog results
Hey guys.
I've got the log attached to this reply. Have a look at the audio events and see what is wrong. I can't figure it out by myself.
Thanks

When will you releasing it fully functional?

Working on JB
Djuganight said:
When will you releasing it fully functional?
Click to expand...
Click to collapse
I have just ported the Jelly Bean from u8800pro to u8800non-pro, so I will be working on this ROM.
Seriously, I have no idea when I will be releasing a fully functional ROM. Because I have my studies as well, so I don't get much time to work on the ROM.
The audio is working in this ROM (wasn't working in the previous port),
The things that are currently not working are:
- WiFi
- Bluetooth
- Video Recording
I will try my best to do as much as possible.
I am new at building android ROMs, so please don't expect too much from me
I will be needing some help from other developers as well.
Do you think I should make a thread for this? or is there already enough not-fully functional JB ROMs there?
Thanks.:good:

Lololololol ridiculous!
Another porting, same issues...
How many are now? 4, 5 Jelly beans?
Ooo man, some times is just better to stay quiet....

Djuganight said:
Lololololol ridiculous!
Another porting, same issues...
How many are now? 4, 5 Jelly beans?
Ooo man, some times is just better to stay quiet....
Click to expand...
Click to collapse
I know how you feel. I also feel that way.
I would like to build Jelly Bean from source, like Blefish is doing right now, but I need a 64bit computer for that (mine is only 32bit. Unless there is a hack for this, I can't build from source.
I think everyone is going to start porting Jelly Bean ROMs until one starts working. :silly:

Everyone is porting the rom with the intention of making ir fully working and then abandon development. Why don't you and others continue the work that is already done instead of making a new port which will end up like the others.
Like your are having compatibility issues due to your 32bit computer, perhaps our device is incompatible with JB...

Djuganight said:
Everyone is porting the rom with the intention of making ir fully working and then abandon development. Why don't you and others continue the work that is already done instead of making a new port which will end up like the others.
Like your are having compatibility issues due to your 32bit computer, perhaps our device is incompatible with JB...
Click to expand...
Click to collapse
U8800 is compatible with JB.

Djuganight said:
Everyone is porting the rom with the intention of making ir fully working and then abandon development. Why don't you and others continue the work that is already done instead of making a new port which will end up like the others.
Like your are having compatibility issues due to your 32bit computer, perhaps our device is incompatible with JB...
Click to expand...
Click to collapse
Our device will remain compatible with every new android untill android will be using some new architecture of processor, so "sometimes it's better to stay silent".
OP, abandon your trials of getting a working JB using copy-paste ports. It can be only ported from source.
P.S.: just install ubuntu x64 and try to build something like CWM recovery out of forumber's source. If it builds, you can build anything you want. Today's computers know how to emulate x64. I'm myself using an old pentium d 820 (i386, sse2 and that's all) and I can build.

Mlopik said:
U8800 is compatible with JB.
Click to expand...
Click to collapse
That I don't know for sure but I believe our is. But why 4 or 5 JB around, all with exactly same issues
Now I and others also pick up a JB Rom, mod it here and there and then instead of 4/5 roms we can have dozens. Then again non working well. This makes sense?

Djuganight said:
That I don't know for sure but I believe our is. But why 4 or 5 JB around, all with exactly same issues
Now I and others also pick up a JB Rom, mod it here and there and then instead of 4/5 roms we can have dozens. Then again non working well. This makes sense?
Click to expand...
Click to collapse
It's still same ROM with other features.. It isn't simply fix Wi-Fi without source.

Djuganight said:
That I don't know for sure but I believe our is. But why 4 or 5 JB around, all with exactly same issues
Now I and others also pick up a JB Rom, mod it here and there and then instead of 4/5 roms we can have dozens. Then again non working well. This makes sense?
Click to expand...
Click to collapse
Because most of devs or those who like to be called developers don't have required knowledge and then leave the project as an excuse.
Honestly I have no hope that we can see a JB rom fully functional.

dark_vader said:
Because most of devs or those who like to be called developers don't have required knowledge and then leave the project as an excuse.
Honestly I have no hope that we can see a JB rom fully functional.
Click to expand...
Click to collapse
Why you don't make some for android yourself? if it's so simply.

nagato.fm said:
Our device will remain compatible with every new android untill android will be using some new architecture of processor, so "sometimes it's better to stay silent".
OP, abandon your trials of getting a working JB using copy-paste ports. It can be only ported from source.
P.S.: just install ubuntu x64 and try to build something like CWM recovery out of forumber's source. If it builds, you can build anything you want. Today's computers know how to emulate x64. I'm myself using an old pentium d 820 (i386, sse2 and that's all) and I can build.
Click to expand...
Click to collapse
So I can install ubuntu x64 on my x86 laptop? Are you talking about a virtual machine or installing ubuntu x64 on the actual laptop?
And as for others: Instead of saying that JB is not compatible with our device and all that sh*t, why don't you encourage me and give me some solutions.
Anyways, I am not posting this JB ROM until it's fully functional, because I might stop development as well (getting interested in firefox os).

rqmok said:
So I can install ubuntu x64 on my x86 laptop? Are you talking about a virtual machine or installing ubuntu x64 on the actual laptop?
And as for others: Instead of saying that JB is not compatible with our device and all that sh*t, why don't you encourage me and give me some solutions.
Anyways, I am not posting this JB ROM until it's fully functional, because I might stop development as well (getting interested in firefox os).
Click to expand...
Click to collapse
First of all,your CPU must support x64,If it supported,you can install x64 to you computer.
If you want install x64 system in virtual machine (like VirtualBox),you CPU must support VT-x or AMD-V (virtualization).
You can check virtualization and x64 support via SecurAble;
http://securable.en.softonic.com

Newer Roms with HDMI out?

Hi,
Are there any newer roms (MM or N7 etc) where you can still use the Hdmi cable to show your screen on monitor or TV like note 4 does?
I keep going back to note 4 roms because newer roms seem to have it taken out.
Is it just a case of flashing the required file or more complicated than that?
Thanks.

Stu308 said:
Hi,
Are there any newer roms (MM or N7 etc) where you can still use the Hdmi cable to show your screen on monitor or TV like note 4 does?
I keep going back to note 4 roms because newer roms seem to have it taken out.
Is it just a case of flashing the required file or more complicated than that?
Thanks.
Click to expand...
Click to collapse
Anyone?

What I mean is, Hdmi out to monitor etc works on note4. But if I put note 7 rom on will this still work as I know it doesnt on actual note 7?

Stu308 said:
What I mean is, Hdmi out to monitor etc works on note4. But if I put note 7 rom on will this still work as I know it doesnt on actual note 7?
Click to expand...
Click to collapse
Ot should work simply with an MHL adapter mate

OT? I think I had a custom rom on once, might have been note 5 rom . That one didnt work.

Stu308 said:
OT? I think I had a custom rom on once, might have been note 5 rom . That one didnt work.
Click to expand...
Click to collapse
Meant to say "it" autospell haha.
Its not software related so it should work regardless of custom ROM or not.

callumbr1 said:
Meant to say "it" autospell haha.
Its not software related so it should work regardless of custom ROM or not.
Click to expand...
Click to collapse
Okay , thanks for the input . Will try it , if not will go back to note 4 rom.
Cheers mate.

Stu308 said:
Okay , thanks for the input . Will try it , if not will go back to note 4 rom.
Cheers mate.
Click to expand...
Click to collapse
I'm not saying i know for sure. But the rom shouldn't matter.
But the kernel might! The kernel would have more to do with this than the rom.
Maybe try flashing a stock kernel that'll work with the rom you use. Or as long as it's built from stock.
I'm no dev. But from what i do know, this seems most logical.

Android 6 for Blue Vivo Air LTE ?

Anybody knows if there is a 6er update for the LTE Qualcomm Version?
Maybe for a similar build, Tornado Fly?
cheers

As I see your device has Snapdragon 410, I can try to port a Custom ROM or a Custom recovery if you want

processor info in "about device" says Qualcomm MSM8916
current build is BLU_V0010UU_V13_Generic with android 5.0.2
Kernel 3.10.49

That's nice. Is your device rooted?
Do you have any experience in flashing custom roms/custom recoveries?

i did root it, dont know which method i used,
tried to put on a trwp, but didnt find a version that worked as i recall..
so how would it work, do you have a FW for the phone?

schlunk said:
i did root it, dont know which method i used,
tried to put on a trwp, but didnt find a version that worked as i recall..
so how would it work, do you have a FW for the phone?
Click to expand...
Click to collapse
I probably will port TWRP from a similar device that has MSM8916.
And no, I don't have the firmware (i'll research soon) neither the phone.

oh, ok. but twrp without a matching 6er rom wouldnt help me much
but thanks for trying to help!

schlunk said:
oh, ok. but twrp without a matching 6er rom wouldnt help me much
but thanks for trying to help!
Click to expand...
Click to collapse
it's okay. after TWRP, I can try to port an android 6 based ROM

does this make sense if you dont have the phone to test it on??
should be pretty buggy with lots of stuff not working, i guess, like with all other custom roms?

schlunk said:
does this make sense if you dont have the phone to test it on??
Click to expand...
Click to collapse
not really, but I do everything if you want a custom rom haha
schlunk said:
should be pretty buggy with lots of stuff not working, i guess, like with all other custom roms?
Click to expand...
Click to collapse
as for msm8916 it shouldn't have much bugs

im not an expert, but all custom roms have issues? like different stuff not working, camera, lte, blutooth etc..
hard to believe if you take like lineage or something and porting it on a specific phone, everything will work ??
thank for trying to help, but i dont really have time for testing. if youre saying everything will work out of the box, i will gladly take it

schlunk said:
im not an expert, but all custom roms have issues? like different stuff not working, camera, lte, blutooth etc..
hard to believe if you take like lineage or something and porting it on a specific phone, everything will work ??
thank for trying to help, but i dont really have time for testing. if youre saying everything will work out of the box, i will gladly take it
Click to expand...
Click to collapse
yeah, all custom roms have issues, but it's pretty easy to fix on msm8916 chipsets. there are a lot of guides where you can fix these bugs