Recently One of my friend moto g4 plus mobile usb port was damaged . He used Samsung On5 USB wire ! He states thats the reason for the port damage ! Now My USB wire is gone . Can i use any other mobile USB ? Will it damage my pin ?? will the other wire also support turbo charge >??
The micro USB cables are identical. I have used different ones without any problems.
Related
i try to connect a usb flash memory to my tab 2 and i follow a trick
i get female-to-female usb adapter and connected it to the galaxy tab 2 usb adapter (that comes with it in the box)
then connect to it a usb flash memory , but my tab didn't read any thing
so after searching,using my avometer and making tests between my tab and my lab i concluded that:
-the female-to-female usb adapter is working probably
-there is no 5v output on the usb male adapter so i think because that the terminal device can't be read
please help me, any one can explain that?
is the manufacture close that property or my android is crushed or must be a microcontroller in otg to work,.... or what??
hey ever body , where is the developers
where is the genius people
i need help
My guess is they sell an official USB reader for a reason...
Sent from my SGH-T679 using xda app-developers app
mon3esh said:
i follow a trick
Click to expand...
Click to collapse
Here is the trick I used:
http://www.ebay.com/itm/300701358749#ht_891wt_1037
Open wallet, buy fix
:silly:
The following link shows how to make your own OTG cable (for another device). http://tech2.in.com/how-to/accessor...sb-otg-cable-for-an-android-smartphone/319982. So there is some additional connection b/w pin 4 & 5 that makes it works as OTG cable.
Is it worth the hassle? I am not sure. I got OTG cable for $0.99 in ebay. Before buying it I tried female USB cable like OP and failed.
thanks for every one tries to help
i found the reason
the secret in the 30 pin connector
which its pins are grouped each group is serves another connector in the another side of cable
so the group of usb has a pin named otg responsible for turning your cable to otg cable
so in the usb male connector it is not connected
so i think that is why samsung didn't built in its tabs a micro usb port and built this port instead it "to can market its accessories"
i recently bought a samsung s4, and i realized that the end port of my microusb cable (the microusb end) only have 4 copper pins instead of the usual 5. Is this a product problem or did samsung designed it to be 4. The usb charges the phone with no problem but im just wondering if it is causing an issues.
p.s: it is the 3rd copper pin thats missing
Hello recently I notice that when I plug the tablet in to my computer or through otg USB for data transfer it doesn't connect. However when I plug it in to for power to charge not charge s no problem. I fix it before thougt it was the electrical tape input over the speakers for good contact since I was having connection issue there. Any help would be great.
ave you tried using another micro usb cable? I have troubles to connect my N7 to pc with original cable but it works for charging fine aswell. I just use my phone cable to transfer files.
I have two other cables and they all do the same as well. Even when use otg with a USB it doesn't light up or shows up as working. Can anyone help me to were it may it the issue inside the tablet. Maybe a loose ground or somewhere. Just need the area where it may be the issue. Also maybe a website or eBay user you have used to replace the charging port with 3.5 mm audio jack since . preferably on eBay. Hope someone can help me out there.
There aren't many things that can go wrong. In the 2012 N7 (and many other devices) there are basically three possibilities:
- the USB cables (if you got multiple cheap cables, you may have multiple bad cables - I got two Monoprice cables a few years ago and they lost their snug fit within a year, they still work but I need to let the cord hang off the side of a table if I do not want the data or power connection to break. The original cable still works perfectly in any orientation)
- the USB port on the device (could be from wear or pulling/angling/torquing whatever is plugged in the USB port. You could theoretically buy an identical USB connector and replace the connector only, which is what people do with the 2013 N7 since the USB/power board assembly can cost over $100 to replace)
- the USB/audio ribbon cable being loose or broken, most likely at the motherboard connector for the 2012 model. If you want to replace that, the 2012's flex cable is relatively cheap at around $15
USB Port
I have replaced the USB port on my 2012 three times so far. They just seem to wear out, and this is without excessive use or abuse. I maybe should start buying them in bulk. They are only $* on Amazon.
I've got a Seek Thermal CompactXR infra-red camera that I bought recently and since it has a micro-usb connector and the 6P has a usb-c connector it needs an adaptor. Got the recommended one by Seek - VicTsing - but it does not work, the camera will no connect to the phone.
The camera works fine, I've used it on the girlfriend's phone.
I've also got a small usb inspection camera that runs off a micro-usb port on a mobile phone, but it too doesn't work on my 6P.
So I'm beginning to think that something isn't working properly with the usb port on my phone, not sure if it's a physical problem or something in the soft/firmware set-up that I need to click or unclick, etc.
Any ideas on how I can fully check that the usb port is working on the phone please?
Anyone?
Make sure you use a compatible USB-C to micro USB adapter. Not all of them will work properly. I also remember something about Google didn't want adapters to work, that's why you'll need a cable I think. What kind of adapter are you using?
As mentioned in my post, it's a VicTsing and is recommended by Seek. It's a USB-C to Micro USB converter.
Hi everyone!
I have a Moto G4 Plus, (XT1625) that the USB plug seem to have gone semi bad on. The phone will charge, but it won't show up under Windows or Linux, (separate machines, not dual boot). I checked eBay and it seems that the USB socket is soldered to the board. Does anyone know a way to get the USB working properly short of surgery?
BTW, I have tried different cables and I also bought a new cable, no difference.
Thanks!
zog
zogthegreat said:
Hi everyone!
I have a Moto G4 Plus, (XT1625) that the USB plug seem to have gone semi bad on. The phone will charge, but it won't show up under Windows or Linux, (separate machines, not dual boot). I checked eBay and it seems that the USB socket is soldered to the board. Does anyone know a way to get the USB working properly short of surgery?
BTW, I have tried different cables and I also bought a new cable, no difference.
Thanks!
zog
Click to expand...
Click to collapse
You have togo to a local repair shop and get the usb port repaied