Database Users

No 3G network after flashing ROM via TWRP!! need help

I restored my stock ROM which was backuped by TWRP. I installed various ROMs before but never faced this typo network issue. But now facing 3G network problem. I tested , there's no problem with the network provider. Installed CM12, but still it's EDGE. When I'm clicking 3G the sim card turns to 'No Service'.
Any solution for this? Please

[email protected] said:
I restored my stock ROM which was backuped by TWRP. I installed various ROMs before but never faced this typo network issue. But now facing 3G network problem. I tested , there's no problem with the network provider. Installed CM12, but still it's EDGE. When I'm clicking 3G the sim card turns to 'No Service'.
Any solution for this? Please
Click to expand...
Click to collapse
change SIM in slot

itsmedRb said:
change SIM in slot
Click to expand...
Click to collapse
No Result

Try remove "persist.radio.multisim.config=dsds" from build.prop

I know, this may sound irrelevant, but anyway, which base firmware was you on before installing CM? Check 'About' section.
There seems to be some bugs in our phone, when you install CM over old stock firmwares. Well, I'm not sure. But try flashing the latest firmware (it's A3 for G360H), then install CM over it by following the regular steps. I'm repeating again, I'm just speculating, not sure.

AtomR said:
I know, this may sound irrelevant, but anyway, which base firmware was you on before installing CM? Check 'About' section.
There seems to be some bugs in our phone, when you install CM over old stock firmwares. Well, I'm not sure. But try flashing the latest firmware (it's A3 for G360H), then install CM over it by following the regular steps. I'm repeating again, I'm just speculating, not sure.
Click to expand...
Click to collapse
The Baseband version is G360HDDU0ANL3
But I installed CM by formatting everything via TWRP!!

[email protected] said:
The Baseband version is G360HDDU0ANL3
But I installed CM by formatting everything via TWRP!!
Click to expand...
Click to collapse
Uh, that's a pretty old firmware, I think.
I know, we all install CM by format everything. I just have a thought that the firmware on which you install CM, affects the CM as well.
For now, try format everything again. Flash the A3 firmware using Odin. Then flash CM again, by following necessary instructions.
Do it, only if you're free/willing to do. I'm only 50% sure about this firmware thingy has any effects on CM. Lol.

Maybe your efs has been corrupt. Check your IMEI go to phone, dial *#06# see if your IMEI is all 0.

SIM not detecting

I had installed cm13 provided by @ashwin007 yet SIM not detected so I thought of going back to stock ROM and I installed it via fastboot as said by @yeshwanthvshenoy but the tragedy is the SIM card is not detected in stock ROM also, now I m out of idea......can any one give remedy???

Try to lock bootloader
Sent from my Moto G (4) using Tapatalk

Have you clean wiped ?? It occurs if there's dirty flash. Try again with custom ROM, and see any other is facing same.
( I still dint unlocked mine so dint use any ROM )

See to be precise,first flash the stock ROM then flash the cm13 and use only "one sim".I had the same issue,first I had only one sim inserted so the ROM worked with single sim,but after inserting 2nd sim card I got a message sim card not detected.So flashed stock then flashed cm13 and use 1 sim only will work fine.

ReX-Hell2heAven said:
Have you clean wiped ?? It occurs if there's dirty flash. Try again with custom ROM, and see any other is facing same.
( I still dint unlocked mine so dint use any ROM )
Click to expand...
Click to collapse
Yes I have clean wiped the stock ROM...but the problem still exists

Which ROM did you flash and tell your model of Indian variant.

don't relock bootloader now it may brick the device -__- i faced this issue when i flashed wrong stock rom check this thread for stock rom for your phone http://forum.xda-developers.com/moto-g4-plus/how-to/index-moto-g4-plus-factory-firmware-t3409033 yeah for xt1643 u need to flash stock for xt1641 or else ur sim won't get detected i guess they messed up naming the files but it happened to me so trust me

Need Solution for No Network on ZUK Z1

Did clean flash zui 2.5.330 using twrp, phone booted normally but no network, both SIM cards seems disabled. Copied CM 12.1 to the phone, flashed n twrp, phone booted but same issue pertain, and I also tried flashing RR ROM, but in that it shows no SIM Card despite the SIM Cards are present.
When I use *#*#4636#*#*, under phone information unable to toggle/change TURN ON RADIO, it doesn't respond?
Any help be highly appreciated

In what way you flashed zui 2.5.330 i mean though twrp or qfil....
Try to flash using qfil....

This has no solution. Sometimes gets fixed in a day, sometimes doesn't even in weeks.
You can try keep restarting it. This time it's day 5th & I am still facing it.
If you get the network back, try NEVER TO LET IT TURN OFF. I keep it powered on for months & everything goes fine, once powered off due to battery & wao it'll get back

karimskcs said:
In what way you flashed zui 2.5.330 i mean though twrp or qfil....
Try to flash using qfil....
Click to expand...
Click to collapse
I flashed through TWRP

karimskcs said:
In what way you flashed zui 2.5.330 i mean though twrp or qfil....
Try to flash using qfil....
Click to expand...
Click to collapse
Can I have the link to download the specific type for qfil, as the one I have doesn't have prog_emmc_firehose_ and XML and patch file.

AbuUmayr said:
I flashed through TWRP
Click to expand...
Click to collapse
Flashed through qfil but to no avail

Finally went to service centre and had the PCB replaced, alhamdulillah, the phone was under warranty...

Same issue...
I dialed *#06# to check MEID number and the slot 2 number is zeroed..... Both slot IMEI numbers are present.....Can this be the reason ..... Anyone with fixed network please try dialing and check of slot 2 MEID number is zeroed....

varun pilakavil said:
I dialed *#06# to check MEID number and the slot 2 number is zeroed..... Both slot IMEI numbers are present.....Can this be the reason ..... Anyone with fixed network please try dialing and check of slot 2 MEID number is zeroed....
Click to expand...
Click to collapse
This happens & I have tried imie changers too but that doesn't solve the issue.

Two possible solutions
Insert SIM's while phone is running.
Do a warm start if possible.
I reckon if you do a full reboot the SIMslot starts to late.
Had the same issue.

I've managed to fix the "SIM card is not allowed" problem by entering *#*#4636#*#* -> Phone Information -> Network Type -> Global Auto (PRL). Rom is PixelExperience 8.0. The problem sim card should be in the slot #1.

Moto G4 Plus SIMCARD No Signal

My Moto G4 Plus (XT1640) was on Stock Rom 7.0 everything working fine, so i got a OTA update, downloaded it and installed, at first it got bootloop so i forced it to power off (Power button and Volume minus) and rebooted it, but the Simcard doesnt get signal , only recognizes tells my sim number but no signal
I already tried everything, after the problems with the official 8.1 via OTA, i tried to downgrade to Stock Rom 7.0, unlocked bootloader , downgraded to 7.0 and it still doesnt get signal on Simcard and when i check the IMEI it was 0, so i installed TWRP and flashed Arrow OS 9.0 triyng to get IMEI and Simcard signal back, Clean flash i got my IMEI back but the Simcard doesnt get signal, recognizes but i cant do calls or use 4g keeps all the time "No Signal"
So i see installed "Stable Oreo 8.1 OPJ28.111-22" flashed it through TWRP and it is with the same problem no signal ... If anyone can help me pls message me or reply this, i need my phone to work!

https://forum.xda-developers.com/moto-g4-plus/how-to/guide-moto-g4-plus-imei0-issue-t3859068

What does your baseband report as, can you provide the full string (including the line after the .77R)?
Here's a similar thread with some possibly useful help. https://forum.xda-developers.com/moto-g4-plus/help/xt1640-service-update-to-8-1-t3926054 in particular https://forum.xda-developers.com/showpost.php?p=79437813&postcount=14

echo92 said:
What does your baseband report as, can you provide the full string (including the line after the .77R)?
Here's a similar thread with some possibly useful help. https://forum.xda-developers.com/moto-g4-plus/help/xt1640-service-update-to-8-1-t3926054 in particular https://forum.xda-developers.com/showpost.php?p=79437813&postcount=14
Click to expand...
Click to collapse
My Baseband is : M8952_70030.25.03.77R DLFT_FSG

fegama said:
My Baseband is : M8952_70030.25.03.77R DLFT_FSG
Click to expand...
Click to collapse
With that baseband, I'd try downloading the factory firmware (do not flash) and use the programutags.bat as I mentioned in the other post. See if that repairs your device.

shawgluz said:
https://forum.xda-developers.com/moto-g4-plus/how-to/guide-moto-g4-plus-imei0-issue-t3859068
Click to expand...
Click to collapse
My IMEI is ok
https://imgur.com/a/OosRkjG

echo92 said:
With that baseband, I'd try downloading the factory firmware (do not flash) and use the programutags.bat as I mentioned in the other post. See if that repairs your device.
Click to expand...
Click to collapse
Ill try it now if it works ill reply here!
When i opened the .bat it shows it, it doesnt show my country that is Brazil what i do ?
1 - LATAM
2 - APAC
3 - Canada
4 - US
5 - EMEA
6 - Quit
Please select Region:

https://imgur.com/a/LWmKkdl
After i use the programutags.bat i got my signal back for some seconds and lost it another time and now it shows "Only Emergency Calls" i check my IMEI and as u can see on the screenshots, ive lost my IMEI, so i think thats because i lost my IMEI using this that my SIM isnt working, i already try my Sim in another device and it is Ok. What can i do to recover my IMEI ? I have a TWRP EFS Backup that i did on Arrow Os 9.0 with IMEI fine, but with the same problem of signal ... , I tried to flash TWRP and restore this backup,it shows sucessful but my IMEI wasnt back

fegama said:
https://imgur.com/a/LWmKkdl
After i use the programutags.bat i got my signal back for some seconds and lost it another time and now it shows "Only Emergency Calls" i check my IMEI and as u can see on the screenshots, ive lost my IMEI, so i think thats because i lost my IMEI using this that my SIM isnt working, i already try my Sim in another device and it is Ok. What can i do to recover my IMEI ? I have a TWRP EFS Backup that i did on Arrow Os 9.0 with IMEI fine, but with the same problem of signal ... , I tried to flash TWRP and restore this backup,it shows sucessful but my IMEI wasnt back
Click to expand...
Click to collapse
You may have lost your baseband downgrading back to Nougat, since you mentioned you had already updated to stock Nougat.
You could either fastboot flash the Oreo firmware or try this: https://forum.xda-developers.com/moto-g4-plus/how-to/guide-moto-g4-plus-imei0-issue-t3859068
That script should have reprogrammed your hw partition and set the correct parameters for your radio, so I'm not sure what's happened to your baseband.

fegama said:
https://imgur.com/a/LWmKkdl
After i use the programutags.bat i got my signal back for some seconds and lost it another time and now it shows "Only Emergency Calls" i check my IMEI and as u can see on the screenshots, ive lost my IMEI, so i think thats because i lost my IMEI using this that my SIM isnt working, i already try my Sim in another device and it is Ok. What can i do to recover my IMEI ? I have a TWRP EFS Backup that i did on Arrow Os 9.0 with IMEI fine, but with the same problem of signal ... , I tried to flash TWRP and restore this backup,it shows sucessful but my IMEI wasnt back
Click to expand...
Click to collapse
https://forum.xda-developers.com/moto-g4-plus/how-to/guide-moto-g4-plus-imei0-issue-t3859068 i did the proceedments with the terminal app and got my IMEI and signal back, but now i want to try to use Arrow Os 9.0 if i flash it through TWRP will i lose my IMEI and Simcard signal another time ?

fegama said:
https://forum.xda-developers.com/moto-g4-plus/how-to/guide-moto-g4-plus-imei0-issue-t3859068 i did the proceedments with the terminal app and got my IMEI and signal back, but now i want to try to use Arrow Os 9.0 if i flash it through TWRP will i lose my IMEI and Simcard signal another time ?
Click to expand...
Click to collapse
I honestly do not know - your best bet is to backup your EFS using Lyuu's TWRP as recommended in the Arrow OS thread. At least you'll have a copy of your modemst1/modemst2 that hopefully will restore your signal. Then flash ArrowOS and the relevant GApps.
You may lose signal if you revert back to stock firmware.

echo92 said:
I honestly do not know - your best bet is to backup your EFS using Lyuu's TWRP as recommended in the Arrow OS thread. At least you'll have a copy of your modemst1/modemst2 that hopefully will restore your signal. Then flash ArrowOS and the relevant GApps.
You may lose signal if you revert back to stock firmware.
Click to expand...
Click to collapse
Thank you! I already post an update, after two days searching for solutions i finally got it, but i am on Stock ROM 7.0 with ElementalGX Kernel and root that was the requirements https://forum.xda-developers.com/moto-g4-plus/how-to/guide-moto-g4-plus-imei0-issue-t3859068 of this post that i used with your help too, but i dont know if this Kernel is better than the stock kernel, Im interested in flashing Arrow Os 9.0, what do u think is better i stay on the stock 7.0 or flash it ?

fegama said:
Thank you! I already post an update, after two days searching for solutions i finally got it, but i am on Stock ROM 7.0 with ElementalGX Kernel and root that was the requirements https://forum.xda-developers.com/moto-g4-plus/how-to/guide-moto-g4-plus-imei0-issue-t3859068 of this post that i used with your help too, but i dont know if this Kernel is better than the stock kernel, Im interested in flashing Arrow Os 9.0, what do u think is better i stay on the stock 7.0 or flash it ?
Click to expand...
Click to collapse
Again, it's up to you. ElementalX is a good kernel, though it really depends on what you want from your device. If you want stability, then the stock ROM and ElementalX (or flashing the stock Oreo firmware and then ElementalX/loony) are your choices. If you want more customisation, then Arrow OS or another custom ROM are your options. It really is up to you.

echo92 said:
Again, it's up to you. ElementalX is a good kernel, though it really depends on what you want from your device. If you want stability, then the stock ROM and ElementalX (or flashing the stock Oreo firmware and then ElementalX/loony) are your choices. If you want more customisation, then Arrow OS or another custom ROM are your options. It really is up to you.
Click to expand...
Click to collapse
After all this trouble i think is better i stay on the Stock 7.0 with the ElementalX Kernel, i need my phone to work, so ill stay on the stock i spent like 2 days to find the solution lol

mobile data not working, off, Apn settings are not available for this user(Solved)

I flashed a rom ( Crdroid) and the mobile data was off, sometimes it doesn't detects the SIM till re-inserting it one or more times, then when it's detected, I put it on but when I check, it's turned off, and about the Apn.. it says "Apn settings are not available for this user" thought I can Still add it with the (+), but when I add it, again I check and it disappears, nothing works
i tried to flash another rom(Corvus Os) and it's still the same, I can't neither receive calls or messages, neither call or send messages
Help

JestXII said:
I flashed a rom ( Crdroid) and the mobile data was off, sometimes it doesn't detects the SIM till re-inserting it one or more times, then when it's detected, I put it on but when I check, it's turned off, and about the Apn.. it says "Apn settings are not available for this user" thought I can Still add it with the (+), but when I add it, again I check and it disappears, nothing works
i tried to flash another rom(Corvus Os) and it's still the same, I can't neither receive calls or messages, neither call or send messages
Help
Click to expand...
Click to collapse
U flash the last firmware?
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Or an other option is to go back to MIUI with fastboot rom and the steps to a customer rom.

i came back to miui, i Think its the latest versión, but still no getting service, thought i used OrangeFox, its necessary Pc ? i installed the lastest firmware too
but i didnt it on Pc so idk, but now its not even detecting de SIM, atleast in the custom roms it was appering

JestXII said:
i came back to miui, i Think its the latest versión, but still no getting service, thought i used OrangeFox, its necessary Pc ? i installed the lastest firmware too
but i didnt it on Pc so idk, but now its not even detecting de SIM, atleast in the custom roms it was appering
Click to expand...
Click to collapse
Test to flash with mi flash tool the fastboot rom on windows. I think to flash the fastboot rom will help.

Or first https://xiaomifirmwareupdater.com/vendor/lavender/
Or
MIUI 12.3 - 20.12.9/10
Status: RELEASED RULES WHEN POSTING 1. If a ROM is not published DONT ASK ABOUT ITS ETA 2. If a ROM is not published DONT ASK why! 3. If a ROM is available, download it and use it 4. If a ROM has bugs, post the bug to the bug section if the BUG is not already listed 5. If you use any form of...
xiaomi.eu

Good luck I've no ideas more

can u flash via MiFlash the latest MIUI ROM?
On my Galaxy S5 using LineageOS17.1 I had the same problem and I did flashed the StockROM of Galaxy S5 and I got all of the Services back like APN Settings or Mobile Data.
So try reflashing the StockROM

joke19 said:
Or first https://xiaomifirmwareupdater.com/vendor/lavender/
Or
MIUI 12.3 - 20.12.9/10
Status: RELEASED RULES WHEN POSTING 1. If a ROM is not published DONT ASK ABOUT ITS ETA 2. If a ROM is not published DONT ASK why! 3. If a ROM is available, download it and use it 4. If a ROM has bugs, post the bug to the bug section if the BUG is not already listed 5. If you use any form of...
xiaomi.eu
Click to expand...
Click to collapse
Thank you, i will try first that and in a while i will get a pc

kerem._trk said:
can u flash via MiFlash the latest MIUI ROM?
On my Galaxy S5 using LineageOS17.1 I had the same problem and I did flashed the StockROM of Galaxy S5 and I got all of the Services back like APN Settings or Mobile Data.
So try reflashing the StockROM
Click to expand...
Click to collapse
i will get a Pc in some hours, i will answer when i get it thanks for your replies

Okay I hope your problem will be fixed

okay, i'm back i clean flashed the fastboot ROM and nothing changed sadly
While in the starting this happened, it was asking me to insert SIM, it was already in but I reinserted it, and then an error appear "com.android.phone keeps failing"
If you know how can I solve this, please tell me

plus info.. if I insert the SIM 2 or more times, it reboots to the system or the recovery

JestXII said:
plus info.. if I insert the SIM 2 or more times, it reboots to the system or the recovery
Click to expand...
Click to collapse
Maybe your SIM card connector is damaged.
did you put in already a other card or put your main card into another phone.

kerem._trk said:
Maybe your SIM card connector is damaged.
did you put in already a other card or put your main card into another phone.
Click to expand...
Click to collapse
(SIM 1)

I tried another sims but still nothing, and these aren't broken or something, tho I'm seeing that Miui 12 has already the problem about non detecting SIM, Soo.. I'll try Fastboot ROM Miui 11 Android 9

Okay, i solved it, tho im a newbie, there was some videos about how to fix it, the first step is flash the stock rom / not the miui 12 one for me, it has problems with detecting chips in some telecom companies like Claro or Telcel, wich mine was Telcel, so i flashed the fastboot rom ( miui 11 android 9) , and at this point, it wasnt detecting the chip still, but somehow i could recieve calls and everything, but now being in miui 11, the 2nd step is restore de cqn file, im not gonna post it but ill give the video where i got it, but with the programs and all that, you can restore de qcn file via diag, thats all, there some videos about how to pass to miui 12 without these problems but idk, heres the videos
stock rom via fastboot
restore cqn file( no sim detected)
that was all, see ya

.