Related
Google Play Edition Lollipop 5.1
1 Click Installer
Root, Custom Recovery and change Boot Logo All-in-One Pack
Created for personal usage, just share it now for those
who want to upgrade to Lollipop 5.1 from 5.0.1, stock motorola 5.0.2
or custom roms like CM12, ResurrectionRemix, BlissPop, Euphoria OS, etc
The easiest way how to install rom, root, recovery
CONTAINS
GPe 5.1 Lollipop
15 sec Adb Setup for install ADB, Fastboot and Drivers
TWRP recovery 2.8.6.0
SuperSU 2.46
Dark Moto Logo
&
Restore to Default (stock recovery, logo)
USAGE
Download the archive and extract
From "TOOLS" folder run (install) "adb-setup-1.4.2.exe
Reboot your phone to the download mode (power+volume down)
Connect via usb cable to pc
From GPe_5.1_OneClick run (double click on) Flash_GPe_5.1.bat
Wait until it finish, than reboot your phone
ROOT & TWRP
Copy the "UPDATE-SuperSU-v2.46.zip" from ROOT-RECOVERY folder to your virtual sd card
Reboot to the download mode (power+volume down) and connect via usb cable to pc
From ROOT-RECOVERY folder run "flash_recovery.bat"
than select recovery and from installed twrp install "UPDATE-SuperSU-v2.46.zip"
CHANGE BOOT LOGO
Download mode + connected usb cable and from folder Dark_MotoLogo run "flash_logo.bat"
RESTORE BOOT LOGO & STOCK RECOVERY
From "Default" folder run "flash_logo.bat" or "flash_recovery.bat"
DOWNLOAD
GPe_5.1.rar
And as always:
I am not responsible for any trouble that may occure by using this guide, such as your phone exploding, your cat dying... you know.
If you're a noob, ask before doing anything you don't know!
That's what XDA threads are for.
I will do my best to give any support needed.
CREDIT AND THANKS
Google for rom
@qd42 for FileFactory link of GPe 5.1
@Chainfire for SuperSU
TeamWin for TWRP recovery
@caitsith2 for Motorola Boot Logo Maker
@Snoop05 for 15 seconds ADB Installer
-reserved- just in case
Good job!
Can I use this installer when my XT1032 is running Blisspop 2.1 (5.0.2) with TWRP already? Or this can be used only on stock non-rooted device.
thx
pnuda said:
Good job!
Can I use this installer when my XT1032 is running Blisspop 2.1 (5.0.2) with TWRP already? Or this can be used only on stock non-rooted device.
thx
Click to expand...
Click to collapse
Yep, you can use it but make a backup from your personal files (videos, pictures, music, etc.) because it'll wipe your data and internal storage.
Do you have UPDATE-SuperSU-v2.46.zip on it's own? I have installed GPE_5.1_XT1032_LMY47M.M001_CFC.xml.zip and TWRP as well seperatly but just need to root it. So just need that file not complete ROM
---------- Post added at 11:35 PM ---------- Previous post was at 10:56 PM ----------
error in rom batch file, it's pointing to windows\system32 and failing
also read should use mfastboot not fastboot?
also your mfastboot flash recovery twrp-2.8.6.0-falcon.img is non GPE version when I flash with yours I get vsync like tearing. Flash to twrp-2.8.6.0-falcon_GPE.img and stable screen
Superuser works
Will I have any problem if after flashing this I'll try to flash the stock motorola 5.1 fw when it wii be out?
Hello,
Thanks for taking your time to create this.
I have already updated my moto G 1032 to lollipop 5.1 using a method as shown in the attachment.
Do i need to do the entire process again?
Maybe it's a stupid question but, will this work for the xt1034 version?
To be more specific and avoid future questions like this, does every rom for the xt1032 work for xt1034?
Thank you
Berties123 said:
Do you have UPDATE-SuperSU-v2.46.zip on it's own? I have installed GPE_5.1_XT1032_LMY47M.M001_CFC.xml.zip and TWRP as well seperatly but just need to root it. So just need that file not complete ROM
---------- Post added at 11:35 PM ---------- Previous post was at 10:56 PM ----------
error in rom batch file, it's pointing to windows\system32 and failing
also read should use mfastboot not fastboot?
also your mfastboot flash recovery twrp-2.8.6.0-falcon.img is non GPE version when I flash with yours I get vsync like tearing. Flash to twrp-2.8.6.0-falcon_GPE.img and stable screen
Superuser works
Click to expand...
Click to collapse
Ahh buddy, about your errors please read the op carefully. Under thanks you can find links, click on it please and about twrp also. I'm using only official releases not unofficials
BurningKoala said:
Will I have any problem if after flashing this I'll try to flash the stock motorola 5.1 fw when it wii be out?
Click to expand...
Click to collapse
No, you can flash moto 5.1 directly whet it will be out.
reganEZ said:
Hello,
Thanks for taking your time to create this.
I have already updated my moto G 1032 to lollipop 5.1 using a method as shown in the attachment.
Do i need to do the entire process again?
Click to expand...
Click to collapse
Nope, this is only easiest way how to upgrade to 5.1 and contains the whole 5.1 firmware not only the updates.
Hello,
My Moto is XT1032 From Tesco GB retail. Can I use this guide to take 5.1 ? Thanks
Same question. There is no word about bootloader. Does it have to be unlocked?
BlackBoneBla said:
Hello,
My Moto is XT1032 From Tesco GB retail. Can I use this guide to take 5.1 ? Thanks
Click to expand...
Click to collapse
Yes.
Rendoqoz said:
Same question. There is no word about bootloader. Does it have to be unlocked?
Click to expand...
Click to collapse
Of course.
▪◼ Tapatalk ♦ Moto G ◼▪
@ronin790 i have a new Moto G X1032 16GB 4.4.4
what i need do first to apply this?
1.- open bootloader
what's next?
zero995 said:
@ronin790 i have a new Moto G X1032 16GB 4.4.4
what i need do first to apply this?
1.- open bootloader
what's next?
Click to expand...
Click to collapse
Just follow mentioned instructions from op.
▪◼ Tapatalk ♦ Moto G ◼▪
Difference between stock Motorola rom and GPE In battery life and performance?
fer2503 said:
Difference between stock Motorola rom and GPE In battery life and performance?
Click to expand...
Click to collapse
Noone can know that when there is no Moto 5.1 firmware yet.
But i assume that the battery life as well as performance should be almost equal. (If they don't screw it up ...I hope they won't)
Flash_GPE_5.1.bat errors
I'm on Motorola stock 5.02 firmware and I'm getting errors when running Flash_GPE_5.1.bat process. It seems I'm getting error for the following command line:-
fastboot.exe flash partition gpt.bin
fastboot.exe erase cache
fastboot.exe oem fb_mode_clear
Are these errors critical or can I just ignore them.
Factory Reset?
Hi, I'm currently on 5.1 GPe with 41.19 stock Bootloader, no Root, just unlocked BL . I followed a Youtube video and everything runs great BUT.. i can't do factory reset on the device (must be done via fastboot).
Is it possible to Factory Reset with your guide/rom?, if yes... Can I reinstall your ROM over the one I currently have?
Thanks in advance mate. Great Job.
Tomazon said:
Hi, I'm currently on 5.1 GPe with 41.19 stock Bootloader, no Root, just unlocked BL . I followed a Youtube video and everything runs great BUT.. i can't do factory reset on the device (must be done via fastboot).
Is it possible to Factory Reset with your guide/rom?, if yes... Can I reinstall your ROM over the one I currently have?
Thanks in advance mate. Great Job.
Click to expand...
Click to collapse
Don't know the answer but mine does the same having upgraded using this method.
Tomazon said:
Hi, I'm currently on 5.1 GPe with 41.19 stock Bootloader, no Root, just unlocked BL . I followed a Youtube video and everything runs great BUT.. i can't do factory reset on the device (must be done via fastboot).
Is it possible to Factory Reset with your guide/rom?, if yes... Can I reinstall your ROM over the one I currently have?
Thanks in advance mate. Great Job.
Click to expand...
Click to collapse
Sorry, i don't know. You can try it, but maybe something wrong with partitions after 5.0.2.
spikey_w said:
I'm on Motorola stock 5.02 firmware and I'm getting errors when running Flash_GPE_5.1.bat process. It seems I'm getting error for the following command line:-
fastboot.exe flash partition gpt.bin
fastboot.exe erase cache
fastboot.exe oem fb_mode_clear
Are these errors critical or can I just ignore them.
Click to expand...
Click to collapse
Just ignore and reboot. If everything works fine don't care about it.
▪◼ Tapatalk ♦ Moto G ◼▪
Hello guys!
This is the OTA file containing some security fixes for that Stagefright bullcrap and some stability fixes too.
You need to be on Android 5.1 GPE Firmware, compilation number LMY47M.M001.
Put the *.ZIP on the internal storage, then go to Settings > About Phone > System Updates and this will be applied. (This is NOT 5.1.1, it's just 5.1. No bigger System updates seem to be planned for Moto G GPE, since this device is 18 months old now).
NOTE: This wont flash in any other ROM or Firmware. Also, this wont flash on TWRP, CWM or any other custom recovery. You need to have stock AOSP recovery from GPE firmware.
Click to expand...
Click to collapse
CHEERS!!!
LINK ¯\_(ツ)_/¯
I'd like to include this patch in my GPE ROMs. It would be helpful if someone could do a fresh install of the GPE Firmware, apply this OTA Update and then make a TWRP Backup or System Dump via ADB:
adb shell
su
busybox tar czvf /sdcard/systemdump.tgz /system
exit
exit
adb pull /sdcard/systemdump.tgz
Note: No personal data will be included.
lost101 said:
I'd like to include this patch in my GPE ROMs. It would be helpful if someone could do a fresh install of the GPE Firmware, apply this OTA Update and then make a TWRP Backup or System Dump via ADB:
adb shell
su
busybox tar czvf /sdcard/systemdump.tgz /system
exit
exit
adb pull /sdcard/systemdump.tgz
Note: No personal data will be included.
Click to expand...
Click to collapse
what partitions should i include in the twrp backup?
Chandresh204 said:
what partitions should i include in the twrp backup?
Click to expand...
Click to collapse
Boot, Modem and System.
Thanks ! I had a notification for this update but could not install it because of non-stock recovery.... I will try to flash it manually.
EDIT : Trying to flash it with TWRP and have this message : "Error executing updater binary in zip '/sdcard/update.zip'
EDIT 1 : Also this message : "Package expects build fingerprint of motorola/falcon_gpe/falcon_umts:5.1/LMY47M.M001/6:user/release-keys or motorola/falcon_gpe/falcon_umts:5.1/LMY47M.M003/8:user/release-keys;
this device has motorola/falcon_retuglb/falcon_umts:4.3/14.10.0Q3.X-84-16/6:user/release-keys" ...
This is weird because i'm on 5.1 GPE and have compilation number LMY47M.M001 in "About the phone"...
What can I do ?
Euphorion said:
Thanks ! I had a notification for this update but could not install it because of non-stock recovery.... I will try to flash it manually.
EDIT : Trying to flash it with TWRP and have this message : "Error executing updater binary in zip '/sdcard/update.zip'
EDIT 1 : Also this message : "Package expects build fingerprint of motorola/falcon_gpe/falcon_umts:5.1/LMY47M.M001/6:user/release-keys or motorola/falcon_gpe/falcon_umts:5.1/LMY47M.M003/8:user/release-keys;
this device has motorola/falcon_retuglb/falcon_umts:4.3/14.10.0Q3.X-84-16/6:user/release-keys" ...
This is weird because i'm on 5.1 GPE and have compilation number LMY47M.M001 in "About the phone"...
What can I do ?
Click to expand...
Click to collapse
You need to have:
1. Untouched System partition (that means NO ROOT, nor ROOTED AND THEN UNROOTED System partion)
2. Stock AOSP recovery fron GPE Firmware...
So I'd reccomend you to reflash the entire GPE firmware, then apply this patch! :fingers-crossed:
MarckozZ said:
You need to have:
1. Untouched System partition (that means NO ROOT, nor ROOTED AND THEN UNROOTED System partion)
2. Stock AOSP recovery fron GPE Firmware...
So I'd reccomend you to reflash the entire GPE firmware, then apply this patch! :fingers-crossed:
Click to expand...
Click to collapse
Ok, thanks for your reply. And what is the easiest way to reflash the gpe firmware ? I followed this tutorial ( http://forum.xda-developers.com/moto-g/general/guide-flash-android-5-1-lollipop-gpe-t3071960 ) six months ago to convert my non-GPE XT1032 with android 5.0.2 to the GPE variant with android 5.1. Sorry for my questions, I'm a total noob.
Euphorion said:
Ok, thanks for your reply. And what is the easiest way to reflash the gpe firmware ? I followed this tutorial ( http://forum.xda-developers.com/moto-g/general/guide-flash-android-5-1-lollipop-gpe-t3071960 ) six months ago to convert my non-GPE XT1032 with android 5.0.2 to the GPE variant with android 5.1. Sorry for my questions, I'm a total noob.
Click to expand...
Click to collapse
you should have the GPE firmware zip, then unzip the file, put the contents in the folder which contains fastboot files, then uncompress the zip file in the attachments below, put the bat file in the same folder as the firmware files,
Then Run the bat file, voila!! you'll be on clean GPE 5.1.
Then setup the moto G and apply the stage fright update when notified.
Then flash the stock motorola radio/modem files to get back signal
then flash twrp to get root.
@lost101 i made the twrp backup, it is 1.34 GB. Clean firmware with just the update installed and not flashed asian modem files.
uploading the zip file which is 725 MB in size.
Thanks for the OTA link
Modified OTA zip for Moto G converted to GPE : https://www.androidfilehost.com/?fid=24052804347815541 i won't check baseband version before install. Tested http://i.imgur.com/Gnt3Y97.jpg and working http://i.imgur.com/GiYOFEo.jpg
TCattd said:
Thanks for the OTA link
Modified OTA zip for Moto G converted to GPE : https://www.androidfilehost.com/?fid=24052804347815541 i won't check baseband version before install. Tested http://i.imgur.com/Gnt3Y97.jpg and working http://i.imgur.com/GiYOFEo.jpg
Click to expand...
Click to collapse
what has been modified on this? does this work with custom recovery ?
Edit 1: my bad, didn't check the screenshots first, it does work with twrp. Now my question is, will it install even if the phone is rooted?
Chandresh204 said:
what has been modified on this? does this work with custom recovery ?
Click to expand...
Click to collapse
Just the initial version/modem check on updater-script. You can compare both zips if you want (original OTA and modified OTA).
And of course it works with a custom recovery. Check the two proofs, please. Was installed and tested using TWRP... :/
TCattd said:
Just the initial version/modem check on updater-script. You can compare both zips if you want (original OTA and modified OTA).
And of course it works with a custom recovery. Check the two proofs, please. Was installed and tested using TWRP... :/
Click to expand...
Click to collapse
sorry, forgot to check the screenshots, it does work with twrp. My question is will it still update even when i am rooted?
Chandresh204 said:
sorry, forgot to check the screenshots, it does work with twrp. My question is will it still update even when i am rooted?
Click to expand...
Click to collapse
Don't know.
Was tested with a clean 5.1 installation (using GPE 5.1 ROM (Untouched) (484mb) from http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510 ) so, no root.
You can always unroot from inside SuperSU settings, then update with the modified OTA and afterwards install SuperSU again before restart from TWRP.
TCattd said:
Thanks for the OTA link
Modified OTA zip for Moto G converted to GPE : https://www.androidfilehost.com/?fid=24052804347815541 i won't check baseband version before install. Tested http://i.imgur.com/Gnt3Y97.jpg and working http://i.imgur.com/GiYOFEo.jpg
Click to expand...
Click to collapse
Very thanks for this modified OTA.
Since I was using custom recovery and root I have to flash clean GPE 5.1 firmware and set it up from ground just to install this update.
You just saved few hours for me. :good:
TCattd said:
Thanks for the OTA link
Modified OTA zip for Moto G converted to GPE : https://www.androidfilehost.com/?fid=24052804347815541 i won't check baseband version before install. Tested http://i.imgur.com/Gnt3Y97.jpg and working http://i.imgur.com/GiYOFEo.jpg
Click to expand...
Click to collapse
I can add this to the OP if you want!
MarckozZ said:
I can add this to the OP if you want!
Click to expand...
Click to collapse
No problem
Chandresh204 said:
you should have the GPE firmware zip, then unzip the file, put the contents in the folder which contains fastboot files, then uncompress the zip file in the attachments below, put the bat file in the same folder as the firmware files,
Then Run the bat file, voila!! you'll be on clean GPE 5.1.
Then setup the moto G and apply the stage fright update when notified.
Then flash the stock motorola radio/modem files to get back signal
then flash twrp to get root.
Click to expand...
Click to collapse
I reflashed everything and it worked. Thanks for your help.
Mine does not work (I am using TRWP). It gives an error say that the calendar.apk has unexpected content...
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research before flashing it!
Click to expand...
Click to collapse
Here's the flashable image for andriod 6.0 on XT 1097/1092 devices, without the need to flash radio files to make it work with Indian networks (should work on other XT1092 devices) . Thanks to "Uchoaz10" who posted the image in thread - http://forum.xda-developers.com/moto-x-2014/development/rom-installation-rsd-t3263800 , rather than using RSD flash the image , you can use my custom made Batch file to flash the rom.
Unzip the image and flash fresh zip into one folder and follow below steps.
Instructions
1) Power off device
2) Boot to boot loader ( press power and Volume down for few seconds and let go)
3) connect to computer via USB
4) Run Flash fresh .bat file
5 ) Reboot device
Note : If your stuck in boot loop , reboot to bootloader and select recovery (press volume up) , do an factory reset and reboot.
Use this method to root - http://forum.xda-developers.com/moto-x-2014/development/root-root-moto-x-2014-android-t3249105 thanks to "Junior Passos"
Download links for Images:
1 - Google Drive: (Working link)
https://drive.google.com/file/d/0B4wmYm0bnkUANlRYR0JnRmdwNWM/view?usp=sharing
Update : Updated with ADB/fastboot in flash fresh zip
shouldn't this work on any Moto X 2014 with an unlocked BL?
munchy_cool said:
shouldn't this work on any Moto X 2014 with an unlocked BL?
Click to expand...
Click to collapse
The 6.0 OTA that got released was for brazil , to flash the OTA you had to convert your phone to XT 1097 first and then flash the OTA . When flashed the OTA , mobile network would not work till correct radios are flashed . With the above method you do not need to convert to XT 1097 or flash radios (atleast for carriers in India)
should I do anything extra if I have a XT1092 ? Just run the bat file?
Your download links are not working for me. Part of the links are replaced with "...".
notanoob said:
The 6.0 OTA that got released was for brazil , to flash the OTA you had to convert your phone to XT 1097 first and then flash the OTA . When flashed the OTA , mobile network would not work till correct radios are flashed . With the above method you do not need to convert to XT 1097 or flash radios (atleast for carriers in India)
Click to expand...
Click to collapse
I know that... But do you know where the check in the ota file is which prevents it from installing on 1092?
V8 pony it is
Funnnny said:
should I do anything extra if I have a XT1092 ? Just run the bat file?
Click to expand...
Click to collapse
yes follow the instructions and run the file
StillBrilliant said:
Your download links are not working for me. Part of the links are replaced with "...".
Click to expand...
Click to collapse
I posted links from the original post , ill upload the zip once i get home.
munchy_cool said:
I know that... But do you know where the check in the ota file is which prevents it from installing on 1092?
V8 pony it is
Click to expand...
Click to collapse
OTA will not get flashed if you try to flash the OTA using an non XT1097 device. Not sure where that check is , if i know that i would not have posted this
Would this work on European XT1092?
I'm also interested in updating my German Moto X XT1092.
aoleg said:
I'm also interested in updating my German Moto X XT1092.
Click to expand...
Click to collapse
FYI the exact same firmware works flawlessly on my retde 1092, I installed it through the TWRP backup though. No extra hassle, everything worked on first boot
Its working on my indian XT1092 ! , as accepted it shows the model as XT1097
Do I need an unlocked BL, root or custom recovery to flash this, or can i flash this on stock firmware 5.1, with locked bootloader
vibhor98 said:
Do I need an unlocked BL, root or custom recovery to flash this, or can i flash this on stock firmware 5.1, with locked bootloader
Click to expand...
Click to collapse
backup ! and give it a try!
actually I had unlocked BL and the stock recovery !
I have EU 1092, so after this update a will have 1097??
pepino34 said:
I have EU 1092, so after this update a will have 1097??
Click to expand...
Click to collapse
Exactly.
Does it need a stock recovery to work, or can I flash it with TWRP installed ?
It needs nothing but unlocked bootloader. You can flash via stock recovery. I just did it, and it works just fine. However, I had to do factory reset after installing it as too many apps were crashing. Dirty flash is no replacement for OTA update.
Well, I have just the opposite : I have TWRP installed, and I wanted to know if that was a problem.
You can just flash via fastboot. No recovery needed.
Sent from my iPad using Tapatalk
So, I took the jump and flashed the rom using your file. It seems to have worked just fine, even if right now, it's hanging on the app optimizing part.
Thanks anyway !
Hi Guys...
I have no idea how you guys deal with these problems, and I take my hat off to you. Asking for help is never my first option, and this is what probably leads to more problems than a resolution. I have no choice. I have to send my pride to his room right now...sigh...
I was trying to install ViperOneM9_4.3.0.
The phone details are here...
--
bootloader kernel: lk
bootloader kroduct: htc_himaruhl
bootloader version: 1.0
bootloader version-main: 1.03.709.13
bootloader boot-mode: download
bootloader version-bootloader: 1.01.0000
bootloader cid: 11111111
HTC Download Mode Details...
--
***unlocked***
htc_himaruhl PVT S-OFF
CID-11111111
Device is rooted and TWRP 3.0.0.1 HIMAR installed.
---
Under the impression that once the phone is in current state, I can install Custom ROM.
I loaded ViperOne unto Phone Storage and used TWRP Recovery to install zip. Install reported success and phone was rebooted.
Phone now stuck in reboot loop.
I may have made matters worse by erasing cache and deleting system folder, etc...
I did make a TWRP recovery backup. I have those files.
I've also downloaded numerous files, including 2PRGIMG_HIMAR_UHL_L50_SENSE70_hTC_Asia_TW_1.03.709.13_Radio_1.1506V24P52.2508.0910_HT[W.T]_release_454911_signed_2_4.
I get "invalid sparse file format at header magi" error when using..
fastboot oem rebootRUU
fastboot flash zip rom.zip
Much thanks for any assistance offered...
You're trying to run 6.0 twrp and roms on top of 5.0 firmware. That's the problem. You need to update your firmware to MM.
iElvis said:
You're trying to run 6.0 twrp and roms on top of 5.0 firmware. That's the problem. You need to update your firmware to MM.
Click to expand...
Click to collapse
Ok, so you're saying TWRP currently installed is the wrong one? ...but it's working. I can finally boot into recovery mode.
What would be my solution? As of now, if I unplug the phone from the USB cable, it does not reboot, it's just there with a blank screen and a flashing orange light.
cnsops said:
Ok, so you're saying TWRP currently installed is the wrong one? ...but it's working. I can finally boot into recovery mode.
What would be my solution? As of now, if I unplug the phone from the USB cable, it does not reboot, it's just there with a blank screen and a flashing orange light.
Click to expand...
Click to collapse
What he meant was your base firmware is on Lollipop and you are trying to flash a marshmallow rom over the top. They are not compatible.
You need to either flash a Lollipop based rom or update your "FIRMWARE" to marshmallow and then flash a marshmallow based rom (viper 4.3.0) over the top and it'll work.
You're s-off. You can flash unsigned zips to update to marshmallow. Simple and fast. (cid might cause issues and need changing temporarily).
Beamed in by telepathy.
Is the M9e (codename: HIMAR) even compatible with roms made for the M9 (codename: HIMA)? Since it already needs a different TWRP than the M9 I highly doubt that you can use the Viper rom on your phone.
Edit: I just googled the specs of the M9e. It's a mediatek device which means you definitely cannot use M9 roms.
Sent from my HTC One M9 using XDA Labs
Hi Guys..
Sorry for no reply... It's a leap year and leap years, mean pure problems.
I have backup files via TWRP on the PC. In TWRP recovery option, I do not see any Backups to restore, probably because I wiped everything.
Can I use the backup files on my PC to restore the phone?
Thanks...
https://super-firmware.com/index.php?a=browse&b=category&id=4854
3$ 1 day
Tapatalk kullanarak iPhone aracılığıyla gönderildi
maybe this it's already solved, but i had the same problem. i wanted to flash at least android 6 but i can't found a way.
any way i solved de reboot whit this (i'm not allowed to post links):
- search for himar_uhl in androidfilehost.com
- this is the filename: 2PRGIMG_HIMAR_UHL_L50_SENSE70_hTC_Asia_TW_1.10.709.2_Radio_1.1506V24P59.2508.1112_HT[W.T]_release_464157_signed_HBoot.zip
PD: i don't know if my english it's correct.
igoh said:
maybe this it's already solved, but i had the same problem. i wanted to flash at least android 6 but i can't found a way.
any way i solved de reboot whit this (i'm not allowed to post links):
- search for himar_uhl in androidfilehost.com
- this is the filename: 2PRGIMG_HIMAR_UHL_L50_SENSE70_hTC_Asia_TW_1.10.709.2_Radio_1.1506V24P59.2508.1112_HT[W.T]_release_464157_signed_HBoot.zip
PD: i don't know if my english it's correct.
Click to expand...
Click to collapse
got bootloop on my htc one m9e (HIMAR) need Original Stock ROM anybody knows where i can get them?
Snaki99 said:
got bootloop on my htc one m9e (HIMAR) need Original Stock ROM anybody knows where i can get them?
Click to expand...
Click to collapse
Does anybody have the RUU Firmware.zip for M9e?
2PRGIMG_HIMAR_UHL_L50_SENSE70_hTC_Asia_TW_1.10.709 .2_Radio_1.1506V24P59.2508.1112_HT[W.T]_release_464157_signed_2_4
http://forum.gsmdevelopers.com/htc-...g-_himar2_ml_uhl-mtk-official-stock-roms.html
http://forum.gsmdevelopers.com/downloads.php?do=file&id=19
twrp here
https://www.mediafire.com/folder/2wd1oprpj5ija/HTC_M9_PCE
command in fastboot console
htc_fastboot flash recovery twrp-3.0.2-1-himar2.img
Hello Everyone!
I am a total noob. I have rooted many phone but never once reversed the process. Plus with stock moto being 32bit and customs being 64 it is even more complicated for me. And plus all this post about lost IMIE numbers and lost GPT makes me scared.
If i may, can I get step by step guide to relock my bootloader and get OTAs.
I have read most of the tutorials here but couldnt get the confidence to move forward(they all sound a little different)
I have moto G5 plus XT1686 indian version 4Gb/32GB currently running PE 9.0 (GTRCraft). I dont remember which version I had when I unlocked the bootloader. I do have a backup of my persist/efs.
I did see one tutorial but it is for 8.1.0 to stock and IDK if that works for me.
Thanks in advance.
reganEZ said:
Hello Everyone!
I am a total noob. I have rooted many phone but never once reversed the process. Plus with stock moto being 32bit and customs being 64 it is even more complicated for me. And plus all this post about lost IMIE numbers and lost GPT makes me scared.
If i may, can I get step by step guide to relock my bootloader and get OTAs.
I have read most of the tutorials here but couldnt get the confidence to move forward(they all sound a little different)
I have moto G5 plus XT1686 indian version 4Gb/32GB currently running PE 9.0 (GTRCraft). I dont remember which version I had when I unlocked the bootloader. I do have a backup of my persist/efs.
I did see one tutorial but it is for 8.1.0 to stock and IDK if that works for me.
Thanks in advance.
Click to expand...
Click to collapse
Just wipe everything from twrp and then use LMSA OR manually flash the stock ROM and then go for bootloader lock procedure. Then you are done. And you won't lose any IMEI or Persist, so you will be safe.
riyan65 said:
Just wipe everything from twrp and then use LMSA OR manually flash the stock ROM and then go for bootloader lock procedure. Then you are done. And you won't lose any IMEI or Persist, so you will be safe.
Click to expand...
Click to collapse
So just download a TWRP flashable 8.1.0 rom and i m good?
reganEZ said:
So just download a TWRP flashable 8.1.0 rom and i m good?
Click to expand...
Click to collapse
No, download a fastboot flashable ROM, with a TWRP flashable you won't be able to apply OTAs:
https://mirrors.lolinet.com/firmware/moto/potter/official/RETAIL/
Use OPSS28.85-17-4 if you're in the US or OPSS28.85-13-3 for the rest of the world.
Follow the available tutorials for flashing that firmware and after that for relocking the BL (almost the same commands). Make sure you have Minimal ADB & Fastboot
https://androidfilehost.com/?fid=746010030569952951
and Motorola drivers
https://drive.google.com/file/d/0B0WGdtNWubBJYnlDcWRBZXltanc/view
installed on your PC.
For the fastboot commands you can use this flashall.bat:
https://www.dropbox.com/s/zfh67uzfle9hsco/flashallO.bat?dl=0
Wolfcity said:
No, download a fastboot flashable ROM, with a TWRP flashable you won't be able to apply OTAs:
https://mirrors.lolinet.com/firmware/moto/potter/official/RETAIL/
Use OPSS28.85-17-4 if you're in the US or OPSS28.85-13-3 for the rest of the world.
Follow the available tutorials for flashing that firmware and after that for relocking the BL (almost the same commands). Make sure you have Minimal ADB & Fastboot
https://androidfilehost.com/?fid=746010030569952951
and Motorola drivers
https://drive.google.com/file/d/0B0WGdtNWubBJYnlDcWRBZXltanc/view
installed on your PC.
For the fastboot commands you can use this flashall.bat:
https://www.dropbox.com/s/zfh67uzfle9hsco/flashallO.bat?dl=0
Click to expand...
Click to collapse
ATTENTION:
You will need the appropriate version of the firmware according to your device version
You need the same or later version of firmware that you have when you unlock your BL
Example: If when you unlock your bl you was on NPNS25.137-33-11 you need the same (or later) complete firmware because you can't downgrade.
This is a part of the bootloader locking tutorial here on XDA. Does this make a difference?
reganEZ said:
ATTENTION:
You will need the appropriate version of the firmware according to your device version
You need the same or later version of firmware that you have when you unlock your BL
Example: If when you unlock your bl you was on NPNS25.137-33-11 you need the same (or later) complete firmware because you can't downgrade.
This is a part of the bootloader locking tutorial here on XDA. Does this make a difference?
Click to expand...
Click to collapse
+ i tried the method and it says "slot not found" error
reganEZ said:
ATTENTION:
You will need the appropriate version of the firmware according to your device version
You need the same or later version of firmware that you have when you unlock your BL
Example: If when you unlock your bl you was on NPNS25.137-33-11 you need the same (or later) complete firmware because you can't downgrade.
This is a part of the bootloader locking tutorial here on XDA. Does this make a difference?
Click to expand...
Click to collapse
You have to use the firmware you were on before you changed to a custom ROM or a newer one.
Never use an older one, downgrading can brick your device.
reganEZ said:
+ i tried the method and it says "slot not found" error
Click to expand...
Click to collapse
The "slot not found" error is normal, it's related to A/B devices with more than one recovery slot like Pixel phones. The commands should work nevertheless. Ignore the message.
I reloaded my G5 Plus with POTTER_RETAIL_7.0_NPNS25.137-93-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip sucessfuly. However, I was not able to relock the bootloader :
C:\Moto potter>fastboot oem lock
...
(bootloader) Still require signed boot.img
It got OTA'ed to Oreo 8.1 latter on, but still bootloader unlocked.
I just went through the flashing process to POTTER_RETAIL_8.1.0_OPSS28.85-17-4, same damned thing.
Everything works fine, excpet for Netflix that can't be installed no more and my bank software who keeps complaining.
I just dunno what to do to relock, any advice ?
Wolfcity said:
You have to use the firmware you were on before you changed to a custom ROM or a newer one.
Never use an older one, downgrading can brick your device.
The "slot not found" error is normal, it's related to A/B devices with more than one recovery slot like Pixel phones. The commands should work nevertheless. Ignore the message.
Click to expand...
Click to collapse
Hello, Thank you for your reply.
I understand I cannot use an older firmware. I remember I unlocked my BL when I was in 7.0 itself, but when I installed the Arrow 9.0, I flashed the 8.1 firmware zip to get the NFC and Fingerprint working. So now my ro.build fingerprint doesnt tell me which firmware build i am on it just says "8.1"
I am confused what to do. Should I download the latest 8.1 moto rom and flash it? I tried the TWRP flashable rom but the phone just goes upto Hello Moto bootscreen and then bootloops.
I erased everything and flashed PE 9.0 again.
reganEZ said:
Hello, Thank you for your reply.
.....Should I download the latest 8.1 moto rom and flash it?.......
Click to expand...
Click to collapse
That's what I would do. If you flash the latest firmware it can't be older as the one you're originally coming from.
Follow my previous post:
Wolfcity said:
No, download a fastboot flashable ROM, with a TWRP flashable you won't be able to apply OTAs:
https://mirrors.lolinet.com/firmware/moto/potter/official/RETAIL/
Use OPSS28.85-17-4 if you're in the US or OPSS28.85-13-3 for the rest of the world.
Follow the available tutorials for flashing that firmware and after that for relocking the BL (almost the same commands). Make sure you have Minimal ADB & Fastboot
https://androidfilehost.com/?fid=746010030569952951
and Motorola drivers
https://drive.google.com/file/d/0B0WGdtNWubBJYnlDcWRBZXltanc/view
installed on your PC.
For the fastboot commands you can use this flashall.bat:
https://www.dropbox.com/s/zfh67uzfle9hsco/flashallO.batflashallO.bat?dl=0
Click to expand...
Click to collapse
Wolfcity said:
That's what I would do. If you flash the latest firmware it can't be older as the one you're originally coming from.
Follow my previous post:
Click to expand...
Click to collapse
Hello Sir, i was on OPSS28.85-13-5 when i flashed custom rom. The link you provided lists OPSS28.85-13-3 as the latest firmware. Should i install that? I am from India if that helps. Help please.
MrAshuBrar said:
Hello Sir, i was on OPSS28.85-13-5 when i flashed custom rom. The link you provided lists OPSS28.85-13-3 as the latest firmware. Should i install that? I am from India if that helps. Help please.
Click to expand...
Click to collapse
Take this one:
85-13-5
https://forum.xda-developers.com/g5-plus/how-to/official-oreo-coming-soon-t3779098/post78844908
CanadianGixxerman said:
I reloaded my G5 Plus with POTTER_RETAIL_7.0_NPNS25.137-93-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip sucessfuly. However, I was not able to relock the bootloader :
C:\Moto potter>fastboot oem lock
...
(bootloader) Still require signed boot.img
It got OTA'ed to Oreo 8.1 latter on, but still bootloader unlocked.
I just went through the flashing process to POTTER_RETAIL_8.1.0_OPSS28.85-17-4, same damned thing.
Everything works fine, excpet for Netflix that can't be installed no more and my bank software who keeps complaining.
I just dunno what to do to relock, any advice ?
Click to expand...
Click to collapse
Flash all the system files while locking. (0-8). Older locking guides have only 0-4. Newer firmware has 9 system files.
Wolfcity said:
Take this one:
85-13-5
https://forum.xda-developers.com/g5-plus/how-to/official-oreo-coming-soon-t3779098/post78844908
Click to expand...
Click to collapse
Thank you so much ?