Hi
i have a Lumia 950XL and tried several times the slider " full file system access " or better called full MTP.
that resulted in a not working phone anymore and reinstalled the phone completly with the Windows Device Recovery Tool.
i did this a couple off times ...
I also have a Lumia 550 and Full MTP is working great !!! so it must be someting in combination with the USB-c driver ???
So .. i googled several times but did not find any solution for the full MTP option on my phone (lumia 950xl)
Can please anybody explain what the status is of the Full MTP option for the x50 phones ??
is it possible yet to enable this option ???
can please somebody explain ??
many thanks
Micheal
any new news ??
+1
Related
Hi,
Can anyone please tell me why my Omnia II (i8000) is not detected by ActiveSync or Windows Mobile Device Center? I'm tired of trying and very close to giving up hope.
Can you please help me with the issue?
First try on another computer. Then you know more and you can search this site.
I tried with 5 computers. Do I need more?
well i have the opposite case ... everytime a connect mine it detects a new phone .....
In win xp just a one time installation of activesync 4.5 then reboots afterwards then install pc studio that came with a cd or download the latest one.
i had this kind of problem with WMDC running in win 7 ultimate.
what i did was
1. install the pc studio sw (use compatibility mode as win vista sp1) then reboot
2. when u plug the O2 it will try to find the driver but will fail to install.
3. uninstall WMDC thru add/remove programs
4. when u go to dev mgr u will see I8000 with "Question Mark" meaning driver doesnt install properly( pretty much obvious..)
4. try to update the driver manually it says to search driver thru internet select that option if u miss it.. ur next option is to run windows update
5. win update will try to find the latest patch and driver update for ur system. (ur phone shuld be connected to pc at this moment) so that it will find the hardware update available for your pc.
6. go to "hardware option" on the windows update, if u see the "MIT USB Sync" thats the driver for your omnia 2, select that and install it right away..once finish reboot while phone are still connected.
7. if it doesnt find the hardware update on first run..reboot and try it again..( it took me several hrs before it finds the mit usb sync.. patience it s must here)
8. WMDC will run on startup automatically.
hope this will help..
and the bad part is Samsung did not make any driver/software for Windows 7
My i8000 works without a hitch on my Win7 system (x64 and x86). Check if your device's USB option is set to ActiveSyn or USB Mass Storage.
ishtangli said:
My i8000 works without a hitch on my Win7 system (x64 and x86). Check if your device's USB option is set to ActiveSyn or USB Mass Storage.
Click to expand...
Click to collapse
the same here, works without any issues on x86/x64.
help with omnai 2 i8000
hi friends..
i bought an omnia 2 i8000 8gb 2 weeks back..i bought it from india..
i want to know weather i can upgrade my winmo 6.1 professional to winmo 6.5..
the shop told free upgrade is possible..but not available in india till now..
so i want to know is there a way to upgrade it from internet..
pda--I8000DDII3
CSC--I8000NUII3
these are the details in version..can anyone get me a solution..
i read from internet that i could go to samsung site of a country and upgrade it from that site if my phone was manufactured in that country..im not sure if thats right..
pls tell me from which place my phone was made..
and also is it possible for me to upgrade to winmo 6.5 from samsung site...
PHONE--I8000XXII4
Just to share ... Spent abt 6hrs figuring out why my omnia 2 would always hang when i needed to set it up for partnership in order to sync in WMDC (OS = Win7). Been searching wif different keywords in google and realised my problem is not common which convinces me that there is something funky with my set up that is preventing the sync.
Got lucky today ... did a wild google on "omnia 2 wmdc driver" ... and on 1 of the threads, discovered that it is important that the Windows in-built Windows Media Player had to be "installed", which i didnt do since i'd been using other media players. And voila ... issue resolved.
MS sucks! Especially when you get humiliated by such problems that seems so easily fixed. =D
enjoycool said:
I tried with 5 computers. Do I need more?
Click to expand...
Click to collapse
Try a 6th PC for good luck
hi ,
I have windows 8 pc ,
I have installed LGUnitedMobileDriver_S4981MAN38AP22_ML_WHQL_Ver_3.8.1 on my pc , don't know if it is the right one for my device.
plugged phone in and on my computer does not show up the phone,
it shows on device manager on ports and modem. but when I use ioroot it sates looking for device .
please can any one help
Lord Kelly said:
hi ,
I have windows 8 pc ,
I have installed LGUnitedMobileDriver_S4981MAN38AP22_ML_WHQL_Ver_3.8.1 on my pc , don't know if it is the right one for my device.
plugged phone in and on my computer does not show up the phone,
it shows on device manager on ports and modem. but when I use ioroot it sates looking for device .
please can any one help
Click to expand...
Click to collapse
Koush universal drivers should work....or maybe disable driver Signing
Hello!
I'd really like to use SideSync 3 from Samsung with my Note 4, because I work on my computer alot and it would be very handy to operate my phone via comp.
I had it set up on my ex personal PC via USB, but I can't get it to work on my ASUS laptop.
Problem: I install SideSync 3 from http://www.samsung.com/us/sidesync/ and after I start the program nothing happens. It's like it freezes on opening and doesn't start. I was looking in the running processes but can't find any clue that is actualy running nor anything. I tried running as admin, tried system compatibility with win 8, 7, xp, dpi changes, admin rights... nothing works.
Any idea?
I'd be really happy if someone helped me out! =)
Sorry this won't help much. But it's working fine on WiFi. 8.1 Windows. Check you have latest version from Samsung on your note
try turning on USB debugging from developer options menu
raveenf said:
try turning on USB debugging from developer options menu
Click to expand...
Click to collapse
tried usb debugging, nothing help because app doesn't start on windows. It's like it hangs..
i tried it on another laptop - lenovo.. same problem...
again:
1. i install sidesync 3.0 from samsung webpage
2. i start it
3. nothing happens
4. i try to run as admin
5. nothing
6. restart
7. notthign
8. run the program
9. nothng
i'm loosing my mind really =(
Anyone with any idea??
As I said... I'm loosing my mind =(
Same problem here on Asus laptop with Windows 8.1
Same problem here.
Any ideas?
hi ,
i noticed that you are trying to get SideSync 3 it to work on Win 8.1 (PC /USB .)
However ,i have Acer laptop Win 8 ( have not updated laptop to Win 8.1 ) SideSync 3 works fine. (No freezes or nothing, smooth, no problems at all )
Note 4 / USB connected .
Maybe you can " read " something into why it works on Win 8, since you " tried system compatibility with win 8" ?
Good luck
I have same problem. I tried on 3 different computers (Win 10, Win 8.1 and Win 7). To my suprise I can't run this app on any computer. It just will not start - at least it seams so. I also tried different compability modes and run it as administrator, but no success (it's same experience as miHah).
This is not a problem of phone (I use S6 Edge) - the phone is recognized when connected by USB (and I can browse/edit content on phone from pc). It just wont work with SideSync. BTW: I tried with SideSync version 3 and 4. Same results - doesnt run.
I have similar problem. I am unable to install samsung sidesync because it freezes my Windows 10 pc while installing samsung usb drivers for mobile devices. I am also unable to uninstall samsung usb drivers. Everytime I forced to reset my pc. Any ideas?
I have same issues and very confused
Admin rights requested on startup
At any time when I reboot, as Sidesync is started during boot sequence, when I login in, the Admin rights autorisation opened as I am not admin by default.
Any clue or advice for this ?
Thanks
jp
Same here
Do you guys also have keis 3 installed? I was able to start sidesync. I hadn't had any devices linked yet but I installed keis 3 and now it is doing the same (not even starting). I noticed when I downloaded sidesync from the Samsung website, it notified me I needed to update keis 3 and uninstalled it when I accepted the update. I wonder if it has something to do with both programs being installed or if you also need sidesync source on the computer as well. BTW I'm running acer win 7.
Hello,
I am a noob in android and windows flashing.So i have only some basic knowledge about android flashing.
I have a Nokia Lumia 535 OS win10. I want to know how to unlock its bootloader and install custom roms in it.I also want to know how to enable usb debugging in my device because its not detected by the adb devices command in cmd when i connect my device to the pc.And also when i connect it using wconnect.exe usb(using a usb cable) and after I enter the pairing key I always get an error which says"Bootstrapping the device(error code 8) so i am not able to connect it to the pc install android apps on it.(I have already downloaded the required files and extracted in into a folder and I have already changed the cmd directory to that folder).I have searched the forum but I did not find anywhere how to fix this error code 8,i,i,bootstrapping the device.
Any help would be appreciated.
Many Many Thanx in advance.
i think Microsoft had stooped working on android in there lumias phone.so lets wait maybe in the next update they will make an easy method to make android apps working on lumias phone with win10.
Hi. I bought a Redmi Note 7 Global 32GB/3GB yesterday and I have problem with transferring files
When I connect my phone to my PC (win 10) via it's USB cable, a menu appears with 3 options on the phone:
*No data transfer
*File transfer
*Transfer photos (PTP)
No matter which one I choose, In all 3 situations a partition appears in "This PC" which is empty and there is no file or folder in it. When I commit to copy a file to it, this error shows up:
Cannot copy item
This device has either stopped responding or has been disconnected
I've no problem with my honor 3c (android 4.4) and other phones on my PC, Also they have MTP option which connects so fast and let me transfer all file and folders.
What should I do?
It's kind of weird because now the phone is recognized and working well via USB 3 but USB 2 still has the above-mentioned problem.
I also have an old pc which I have linux lite, Chalet OS, and lubuntu on it. surprisingly file transfer works on linux lite and chalet OS via USB 1.1 - 2.0.
Can anyone use file transfer on windows via USB 2 port?
Hey man, I just bought the same phone today, 32/3gb and global, when I tried to connect it the first time that happened and I got scared.
I researched a bit and did a few things, deleted the drivers and the device in windows 10 device manager, reinstalled them and factory resetted my phone, and now is working well. I think the factory reset did the trick.
I hope this helps you. Cheers.
Psicovirus said:
Hey man, I just bought the same phone today, 32/3gb and global, when I tried to connect it the first time that happened and I got scared.
I researched a bit and did a few things, deleted the drivers and the device in windows 10 device manager, reinstalled them and factory resetted my phone, and now is working well. I think the factory reset did the trick.
I hope this helps you. Cheers.
Click to expand...
Click to collapse
Hey. Thanks for sharing your solution. So you've experienced the same problem. Did you test USB 3 before uninstalling drivers and resetting your phone?
Are you able to see your phone's content and transfer via USB 2?
aqua07 said:
Hey. Thanks for sharing your solution. So you've experienced the same problem. Did you test USB 3 before uninstalling drivers and resetting your phone?
Are you able to see your phone's content and transfer via USB 2?
Click to expand...
Click to collapse
Hello, sorry for the late response, I hope you found a solution early, but if not, I used both USB 2.0 and 3.0 (I think that's what you're referring to) and it did not work, after the reset and unistallation of drivers, both of them worked. I also have to say that I was using the cable issued in the box where the phone came, I'm still using it without trouble.