Any solution to screen freezes after unlocking bootloader? - Zenfone 5 Q&A, Help & Troubleshooting

Did any one find the solution for screen freezes issue after unlocking bootloader? I want to install custom roms/kernels but can't do so
Tried the 6 scripts by @ozank ... But no success...

I found many users facing this issue.
You just need to flash the custom recovery and relock the bootloader again.

smnshuvo said:
I found many users facing this issue.
You just need to flash the custom recovery and relock the bootloader again.
Click to expand...
Click to collapse
The phone doesn't boot if kernel and/or rom is custom(non stock based) and bootloader is relocked. It just shows a usb sign.

hpgramani said:
The phone doesn't boot if kernel and/or rom is custom(non stock based) and bootloader is relocked. It just shows a usb sign.
Click to expand...
Click to collapse
May be you are using an old file of tank042, some of the files available there are corrupted. Doesn't help to relock the bootloader.

I tried all possible solutions. Sadly, there's no way to fix this.
Throw your device in trash (I'll do this with my Zenfone)

leonardohenrique10 said:
I tried all possible solutions. Sadly, there's no way to fix this.
Throw your device in trash (I'll do this with my Zenfone)
Click to expand...
Click to collapse
Possibly not a good solution. I have my zenfone that even doesn't boot. No fastboot, no boot and recovery.
---------- Post added at 09:08 AM ---------- Previous post was at 09:07 AM ----------
hpgramani said:
Did any one find the solution for screen freezes issue after unlocking bootloader? I want to install custom roms/kernels but can't do so
Tried the 6 scripts by @ozank ... But no success...
Click to expand...
Click to collapse
leonardohenrique10 said:
I tried all possible solutions. Sadly, there's no way to fix this.
Throw your device in trash (I'll do this with my Zenfone)
Click to expand...
Click to collapse
Try the debrick method. It will recover the fastboot with its original source. Don't do this if your phone is not hard bricked.
It may brick your phone too.

Related

Remove ftp lock

Hi,
I just wanted to flash a theme for my rom. But when I tried to reboot in recovery... My phone says custom binary blocked by frp lock!
How do i fix this? I didnt even try to factory reset it. I just tried booting in recovery.
Where have i selected this lock and how do i remove it? What THE hell is this?
Pls heeeelp
liobeir said:
Hi,
I just wanted to flash a theme for my rom. But when I tried to reboot in recovery... My phone says custom binary blocked by frp lock!
How do i fix this? I didnt even try to factory reset it. I just tried booting in recovery.
Where have i selected this lock and how do i remove it? What THE hell is this?
Pls heeeelp
Click to expand...
Click to collapse
Go to settings>developers options
Then make sure the OEM unlock is ENABLED.
Never disable it.
Good luck,
Have a very happy new year.
Sent from my SM-G928T using Tapatalk
Misterjunky said:
Go to settings>developers options
Then make sure the OEM unlock is ENABLED.
Never disable it.
Good luck,
Have a very happy new year.
Sent from my SM-G928T using Tapatalk
Click to expand...
Click to collapse
Thats THE problem....i cant boot up my phone. It is Locked. I read about THE lock and I'm Locked out of my phone for 72 houres? But If I flash stock rom through odin...Will this reset my device or is it Locked for that? Cause that's what it says.... Factory reset lock....
liobeir said:
Thats THE problem....i cant boot up my phone. It is Locked. I read about THE lock and I'm Locked out of my phone for 72 houres? But If I flash stock rom through odin...Will this reset my device or is it Locked for that? Cause that's what it says.... Factory reset lock....
Click to expand...
Click to collapse
If it cannot boot you need to Odin flash the official stock firmware in download mode before you can do anything else.
Good luck.
Sent from my SM-G928T using Tapatalk
---------- Post added at 12:48 AM ---------- Previous post was at 12:43 AM ----------
liobeir said:
Thats THE problem....i cant boot up my phone. It is Locked. I read about THE lock and I'm Locked out of my phone for 72 houres? But If I flash stock rom through odin...Will this reset my device or is it Locked for that? Cause that's what it says.... Factory reset lock....
Click to expand...
Click to collapse
Odin flashing will not delete anything in your internal sdcard, it will delete the current rom.
For best results do a full wipe in recovery mode before Odin flashing the Samsung official firmware.
Sent from my SM-G928T using Tapatalk
Misterjunky said:
If it cannot boot you need to Odin flash the official stock firmware in download mode before you can do anything else.
Good luck.
Sent from my SM-G928T using Tapatalk
---------- Post added at 12:48 AM ---------- Previous post was at 12:43 AM ----------
Odin flashing will not delete anything in your internal sdcard, it will delete the current rom.
For best results do a full wipe in recovery mode before Odin flashing the Samsung official firmware.
Sent from my SM-G928T using Tapatalk
Click to expand...
Click to collapse
I can only boot in download mode.... I Will try to flash stock rom tonight. But i think THE lock Will prevent me from doing it. pfffffff
liobeir said:
Hi,
I just wanted to flash a theme for my rom. But when I tried to reboot in recovery... My phone says custom binary blocked by frp lock!
How do i fix this? I didnt even try to factory reset it. I just tried booting in recovery.
Where have i selected this lock and how do i remove it? What THE hell is this?
Pls heeeelp
Click to expand...
Click to collapse
Before flashing do as Misterjunky said, but also you need to DELETE google account.on device.Only then in download mode it will show message FTP OFF.
Every time you flash ROM you need to delete google account.
tin2404 said:
Before flashing do as Misterjunky said, but also you need to DELETE google account.on device.Only then in download mode it will show message FTP OFF.
Every time you flash ROM you need to delete google account.
Click to expand...
Click to collapse
the problem is I can't boot in recovery. I can't wipe. just tried flashing tarp recovery with odin but it fails.... I really hope I can flash the stockrom!!!! I DON'T GET IT ! I didn't do a factory reset. but i guess I disbabled it somehow and then when I tried to boot in recovery...I directly got the message saying: custom binary blocked by frp lock.
tried to flash firmware from samfirmware but..... fails at the end.... I'm hopeless!!! should I keep trying to flash stock firmwares??
liobeir said:
tried to flash firmware from samfirmware but..... fails at the end.... I'm hopeless!!! should I keep trying to flash stock firmwares??
Click to expand...
Click to collapse
Hey. If you show which firmware did you try, Odin fail's screenshoot and more detail of your problem, someone can help easily.. Good luck.
BtW: Did you ever try to flash ''hidden.img(not tar) before or after flashing the firmware?
Konsstantine34 said:
Hey. If you show which firmware did you try, Odin fail's screenshoot and more detail of your problem, someone can help easily.. Good luck.
BtW: Did you ever try to flash ''hidden.img(not tar) before or after flashing the firmware?
Click to expand...
Click to collapse
I managed to fix it by flashing the firmware, then rebooting my phone, restarted odin also and then flash the Hidden.img.tar. Omg! I was starting to get worried! Thanks for all the help guys!
Konsstantine34 said:
Hey. If you show which firmware did you try, Odin fail's screenshoot and more detail of your problem, someone can help easily.. Good luck.
BtW: Did you ever try to flash ''hidden.img(not tar) before or after flashing the firmware?
Click to expand...
Click to collapse
Good info... what's is hidden.img? And where is?
jah2110 said:
Good info... what's is hidden.img? And where is?
Click to expand...
Click to collapse
In the firmware.tar.md5, I just saw that some guys crossed over the fail(soft brick) with flashing hidden.img etc, (or fail after cm.bin).. Hidden.img contains \\assets, Meta-Inf, org, res, AndroidManifest.xml, classex.odex, resorces.odex files// I think phone's fonts, banners, properties etc..
@liobeir Did you solve or not, I dont get it..
Konsstantine34 said:
In the firmware.tar.md5, I just saw that some guys crossed over the fail(soft brick) with flashing hidden.img etc, (or fail after cm.bin).. Hidden.img contains \\assets, Meta-Inf, org, res, AndroidManifest.xml, classex.odex, resorces.odex files// I think phone's fonts, banners, properties etc..
@liobeir Did you solve or not, I dont get it..
Click to expand...
Click to collapse
I solved it! So glad!
liobeir said:
I solved it! So glad!
Click to expand...
Click to collapse
hello guys i jst stumble upon the same problem.
not even with stock samfirmware i canbt fix this... some help please
liobeir said:
Hi,
I just wanted to flash a theme for my rom. But when I tried to reboot in recovery... My phone says custom binary blocked by frp lock!
How do i fix this? I didnt even try to factory reset it. I just tried booting in recovery.
Where have i selected this lock and how do i remove it? What THE hell is this?
Pls heeeelp
Click to expand...
Click to collapse
Flash stock rom with odin, factory reset and you are done. do not set up the phone with google account to turn it again on. flash recovery and your favorite rom.
Enable oem unlock so it prevents this from happening again.
Frp lock and Recovery not Seandroid enforced.
So I bought this S6 edge plus two days ago. Set up my google account, fingerprint lock and pin.
Inserted the pin 24 hours ago and I'm locked out. Stuck on the animation screen with a red inscription saying Custom Binary Blocked by FRP lock.
Pressing the home+ power + lower volume button takes me to this interface I have noidea of.
Pressing the up button+ power+ home says Recovery Is Not Seandroid Enforced.
Ps...It's been a while since I used android.
So my questions are
1. Which one is the hard reset and when does the 24 hours start?
2.What's with that interface?
3.WHat happens after my 24/72 hours?

Can't enable "OEM unlock" option

i'm trying to unlock the bootloader, but when i go to the developer option i can't enable the "OEM unlock" option because when i tap on it and insert the pin and then press activate, the option remain grey. Someone know how to solve?
install whit qfil cyanogen os , see a tutorial from internet to me happen the same and try to unlock and dont can do it. finally i brick my phone whitout any recovery soo dont do bad things . Use qfil .
Same here
thanos92 said:
i'm trying to unlock the bootloader, but when i go to the developer option i can't enable the "OEM unlock" option because when i tap on it and insert the pin and then press activate, the option remain grey. Someone know how to solve?
Click to expand...
Click to collapse
Could you solve it? I have the same problem
---------- Post added at 06:52 PM ---------- Previous post was at 06:34 PM ----------
thanos92 said:
i'm trying to unlock the bootloader, but when i go to the developer option i can't enable the "OEM unlock" option because when i tap on it and insert the pin and then press activate, the option remain grey. Someone know how to solve?
Click to expand...
Click to collapse
Could you solve it? I have the same problem
andrestl said:
Could you solve it? I have the same problem
---------- Post added at 06:52 PM ---------- Previous post was at 06:34 PM ----------
Could you solve it? I have the same problem
Click to expand...
Click to collapse
Same here, anyone with an idea?
Billytromp said:
Same here, anyone with an idea?
Click to expand...
Click to collapse
If you want to root, use adb method or all in one tool, both are preferred methods
i have the same problem. I noticed when clicking on "oem unlock" and the warning-message appears that when you don't click on "cancel" or "enable" but somewhere else, the warning message disappears and the "oem unlock" seems like enabled (switch is turned on). However when i leave the menu and open it up again, the oem unlock is disabled again. Seems like a bug.
i found an interesting article about how to get past the locked bootloader:
http://www.tech-and-dev.com/2016/06...ing-to-marshmallow-zui-lenovo-zuk-z1.html?m=1
With this method it seems that its possible to get twrp on the device. But im not sure if i can install for example CM14 via twrp when i have installed it on the device. Im afraid to brick my zuk z1.
xdddd23 said:
install whit qfil cyanogen os , see a tutorial from internet to me happen the same and try to unlock and dont can do it. finally i brick my phone whitout any recovery soo dont do bad things . Use qfil .
Click to expand...
Click to collapse
Do you have qfil package for cyanogen os?
mp_mogambo said:
****TO GO BACK TO STOCK*****
You only need qfil and install cyanogen os with it. Later enable OEM, unlock bootloader , install twrp... I don't faced more problems , I m in nuclear 7.1
Click to expand...
Click to collapse
thanos92 said:
i'm trying to unlock the bootloader, but when i go to the developer option i can't enable the "OEM unlock" option because when i tap on it and insert the pin and then press activate, the option remain grey. Someone know how to solve?
Click to expand...
Click to collapse
****TO UNLOCK BOOTLOADER*****
I AM STILL FACING SAME PROBLEM
PROBLEM IS STILL NOT SOLVED
THIS IS THE ALTERNATIVE
Its not just with cyanogen os
If you flash cm13/14.1 same problem occurs..
So here is what can you do download twrp qfil from below link
https://mega.nz/#!oB4jyJzR!YXegLqP9CkHZNhGklY0tBI8eh8meSo_rJZDKCDB2F5A
Flash it through qfil
Then flash zui 0.9 ther you will get unlock oem option
Then use this all in one tool
http://forum.xda-developers.com/zuk-z1/orig-development/tool-toolzukz1eng0-0-3-mauronofrio-t3332563
And unlock bootloader...
---------- Post added at 08:31 PM ---------- Previous post was at 08:29 PM ----------
****HOW TO GO BACK TO STOCK IN THIS CASE*****
I AM STILL FACING SAME PROBLEM
Its not just with cyanogen os
If you flash cm13/14.1 same problem occurs..
So here is what can you do download twrp qfil from below link
https://mega.nz/#!oB4jyJzR!YXegLqP9CkHZNhGklY0tBI8eh8meSo_rJZDKCDB2F5A
Flash it through qfil
Then flash zui 0.9 ther you will get unlock oem option
Then use this all in one tool
http://forum.xda-developers.com/zuk-z1/orig-development/tool-toolzukz1eng0-0-3-mauronofrio-t3332563
And unlock bootloader
But here is the problem
Even after unlocking bootloader
You cant flash COS using fastboot method
If you use all in one tool then you will get error as
*device locked*
And if you use commands then you will see error as
*invalid package*
So use http://builds.cyngn.com/factory/ham/cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394.zip
And you are back to stock...
---------- Post added at 08:34 PM ---------- Previous post was at 08:31 PM ----------
xdddd23 said:
mp_mogambo said:
****TO GO BACK TO STOCK*****
You only need qfil and install cyanogen os with it. Later enable OEM, unlock bootloader , install twrp... I don't faced more problems , I m in nuclear 7.1
Click to expand...
Click to collapse
Even if you go back
Problem stays the same
Click to expand...
Click to collapse
@mp_mogambo I reinstall cos12 for some reasons, and don't have the problem again. I flashed it via fastboot and qfil trying solve a battery problem.
[SOLVED]
Guys i found the way.....
https://mega.nz/#!RFUw2CbZ!GXS6KeOy_8n2y_rOBJUS5WJSP5kchODcGUF0U1TxYO8
Here is the qpst version of COS12.1-YOG4PAS3AJ
Flash it using qfil
Thats it done!!
Button works!!!!
If you want you can go back to 12.1-YOG4PAS39IG
use all in one tool
mp_mogambo said:
[SOLVED]
Guys i found the way.....
https://mega.nz/#!RFUw2CbZ!GXS6KeOy_8n2y_rOBJUS5WJSP5kchODcGUF0U1TxYO8
Here is the qpst version of COS12.1-YOG4PAS3AJ
Flash it using qfil
Thats it done!!
Button works!!!!
If you want you can go back to 12.1-YOG4PAS39IG
use all in one tool
Click to expand...
Click to collapse
I have the same issue with a brand new ZUK Z1.
I wanted to ask you: if I flash this rom with this qfil tool, am I going to lose all data from my device?
Is it like factory reset?
RASTAVIPER said:
I have the same issue with a brand new ZUK Z1.
I wanted to ask you: if I flash this rom with this qfil tool, am I going to lose all data from my device?
Is it like factory reset?
Click to expand...
Click to collapse
QFIL writes all partitions new, so yes you loose all data.
strongst said:
QFIL writes all partitions new, so yes you loose all data.
Click to expand...
Click to collapse
Hmm, then I would like to avoid that and I really can't understand why this bug happened at my device.
I am writing in other forums too and it looks really rare..
My device is brand new, and although I made 3 system updates, the issue was always there.
Sent from mTalk
I flashed ZUI 2.3 and had boot loops. Then I flashed COS via QFIL. Now I, cant access fastboot. Can any one help?
raghukcube said:
I flashed ZUI 2.3 and had boot loops. Then I flashed COS via QFIL. Now I, cant access fastboot. Can any one help?
Click to expand...
Click to collapse
Switch off the phone... Hold Volume up and down together and connect to PC
You will be in boot loader or fastboot mode
But in cos, in developer option there is option for advance boot menu... U can turn on that...
---------- Post added at 05:22 PM ---------- Previous post was at 05:18 PM ----------
RASTAVIPER said:
Hmm, then I would like to avoid that and I really can't understand why this bug happened at my device.
I am writing in other forums too and it looks really rare..
My device is brand new, and although I made 3 system updates, the issue was always there.
Sent from mTalk
Click to expand...
Click to collapse
I think this bug will occur once you jump to zui from cos...
mp_mogambo said:
I think this bug will occur once you jump to zui from cos...
Click to expand...
Click to collapse
Nope, no such case.
I just got the phone with CM.
Sent from my m1 note using Tapatalk

Someone fix my huawei ascend xt please

Hi there i have my huawei ascend xt, i need someone can fix it and send it, please.... because i cant
ill be paying for the service to ben fixed my phone, not fro free, someone real help me pleaae...
What's wrong with your XT?
Ad86shwks said:
What's wrong with your XT?
Click to expand...
Click to collapse
bootloader unlocked and dont want to relock it again and im trying to install a fres install stck rom on it with stock recovery mode and dont want to allow me to do it...i need help with that
Angelny646 said:
bootloader unlocked and dont want to relock it again and im trying to install a fres install stck rom on it with stock recovery mode and dont want to allow me to do it...i need help with that
Click to expand...
Click to collapse
you can use any of my back to stock roms here > https://forum.xda-developers.com/hu...uide-how-to-update-b130-to-b140-b150-t3555254
you can't do it from stock recovery
you need to boot TWRP to flash roms
fastboot boot twrp.img
clsA said:
you can use any of my back to stock roms here > https://forum.xda-developers.com/hu...uide-how-to-update-b130-to-b140-b150-t3555254
you can't do it from stock recovery
you need to boot TWRP to flash roms
fastboot boot twrp.img
Click to expand...
Click to collapse
I tried that way but I want to get rid warning message appears every time when I turn on my phone.
No known way to do that here that I've seen - would probably require tools that only Huawei repair depots have.
Angelny646 said:
I tried that way but I want to get rid warning message appears every time when I turn on my phone.
Click to expand...
Click to collapse
Angelny646 said:
I tried that way but I want to get rid warning message appears every time when I turn on my phone.
Click to expand...
Click to collapse
When you unlocked the bootloader you lost that .. theirs no way of going back to out of the box stock with this phone
divineBliss said:
No known way to do that here that I've seen - would probably require tools that only Huawei repair depots have.
Click to expand...
Click to collapse
Is only that bootloader warning message that I see every time is a great phone, also I have the xt2 from Huawei, nice but I like more this one that I want to fix that issue.
Angelny646 said:
Is only that bootloader warning message that I see every time is a great phone, also I have the xt2 from Huawei, nice but I like more this one that I want to fix that issue.
Click to expand...
Click to collapse
Maybe im going get rid of this phome, because now is in rescue mode, no way to flash it now, so maybe im going to smash this phone i cant fix it is no hope with this, or maybe to wait to some release the huawei special tool from manufacturer.....
Angelny646 said:
Maybe im going get rid of this phome, because now is in rescue mode, no way to flash it now, so maybe im going to smash this phone i cant fix it is no hope with this, or maybe to wait to some release the huawei special tool from manufacturer.....
Click to expand...
Click to collapse
hold power plus volume down with the phone hooked to the PC to enter the bootloader
from the bootloader you can use fastboot boot recovery twrp.img
from twrp you can flash a stock rom
you can't remove the unlocked bootloader message

P10 Lite Bricked

Hi guys,
After a flashing of boot.img take by Huawei Update Extractor my phone began to boot in a black screen, but with twrp and fastboot enabled.
So I tried to wipe data from twrp, but if I reboot the phone gives me the boot animation of huawei once, after it reboots automatically in twrp.
When I reboot via twrp it says that in my phone there's not an OS working.
Idk if this is a brick or something but if there's a mode to unbrick it i will very happy.
Status of my phone:
Bootloader: Unlocked
Twrp: Yes
Fastboot: Yes
Can Boot?: Only Once, then goes in twrp.
You need to reflash the stock boot image that goes with your current rom version, if it doesn't work you can try doing the dload method
davidhozic said:
You need to reflash the stock boot image that goes with your current rom version, if it doesn't work you can try doing the dload method
Click to expand...
Click to collapse
Where I can find my stock rom? I'm not an expert of modding
Dm me a picture of the box (the area where the model, IME... are) and I'll find it for you..
Also tell me your region so i don't give you the wrong firmware
davidhozic said:
Dm me a picture of the box (the area where the model, IME... are) and I'll find it for you..
Also tell me your region so i don't give you the wrong firmware
Click to expand...
Click to collapse
Ok, I'm Italian my phone is a WAS-LX1A but…
There's a new problem.
I was trying to install a custom rom (lineage 14.1) but it resulted in a hard brick, my phone isn't turning on anymore and no button combinations work.
Have I ripped the phone?
zDerpyII_ said:
Ok, I'm Italian my phone is a WAS-LX1A but…
There's a new problem.
I was trying to install a custom rom (lineage 14.1) but it resulted in a hard brick, my phone isn't turning on anymore and no button combinations work.
Have I ripped the phone?
Click to expand...
Click to collapse
Like it doesn show anything at all?
If you connect it to pc does it get shown(in fastboot)?
davidhozic said:
Like it doesn show anything at all?
If you connect it to pc does it get shown(in fastboot)?
Click to expand...
Click to collapse
So, idk why, I put it in fastboot, and when I plug it to the pc my phone is called fastboot2.0
Now what I have to do?
I was at that stage of hard brick with my p10 lite but then i used dc phoenix to reflash the stock rom and completely unbrick it.. The only problem is it's 15€ (unlimited flashing for 3 days) and i haven't found any free alternatives..
If you buy via PayPal and you are unable to unbrick they will refund you tho.
I'll make a video about it when i get home if you want to wait... From my experience that is the only thing you can do at that stage ( if you are unable to boot into erecovery, screen black)
davidhozic said:
I was at that stage of hard brick with my p10 lite but then i used dc phoenix to reflash the stock rom and completely unbrick it.. The only problem is it's 15€ (unlimited flashing for 3 days) and i haven't found any free alternatives..
If you buy via PayPal and you are unable to unbrick they will refund you tho.
I'll make a video about it when i get home if you want to wait... From my experience that is the only thing you can do at that stage ( if you are unable to boot into erecovery, screen black)
Click to expand...
Click to collapse
I need the stock rom of my huawei P10 Lite
It was Android 7.0 and EMUI 5.1, Model WAS-LX1A, Italy
No stock rom no unbrick
EDIT: But what if I install a custom rom (e.g. Lineage)?
zDerpyII_ said:
I need the stock rom of my huawei P10 Lite
It was Android 7.0 and EMUI 5.1, Model WAS-LX1A, Italy
No stock rom no unbrick
EDIT: But what if I install a custom rom (e.g. Lineage)?
Click to expand...
Click to collapse
If your screen is black and the phone gets detected in fastboot, then you need to flash the stock rom using dx phoenix.
Custom ROMs can't be installed via it and even if they couod be, you need the stock because custom ROMs don't contain the right files for an unbrick
davidhozic said:
If your screen is black and the phone gets detected in fastboot, then you need to flash the stock rom using dx phoenix.
Custom ROMs can't be installed via it and even if they couod be, you need the stock because custom ROMs don't contain the right files for an unbrick
Click to expand...
Click to collapse
Ok, where I can find a stock rom?
My model and region are in one of my replies
zDerpyII_ said:
Ok, where I can find a stock rom?
My model and region are in one of my replies
Click to expand...
Click to collapse
Search for Was-LX1AC432B206 on firmware finder
davidhozic said:
Search for Was-LX1AC432B206 on firmware finder
Click to expand...
Click to collapse
Now what I have to do? I never used DC Pheonix… if someone can use it please pm me.
zDerpyII_ said:
Now what I have to do? I never used DC Pheonix… if someone can use it please pm me.
Click to expand...
Click to collapse
They have their forums btw...
What you need to do is connect your phone to the pc while on bootloader, select the update.app file from the main firmware zip, and also get the customization .app from the "hw Europe" or sth like that zip file (if you have one) and then just let it flash.
---------- Post added at 12:23 PM ---------- Previous post was at 12:21 PM ----------
Btw, if you did what i did a while back and played with oeminfo, you can grab someones c432 twrp backup of it, extract it and create a custom flash script.. I did this a while back so I can't give you exact instructions yet..
When I'll get home I'll do some research and make a video flashing my bricked p10 lite with dc Phoenix
davidhozic said:
They have their forums btw...
What you need to do is connect your phone to the pc while on bootloader, select the update.app file from the main firmware zip, and also get the customization .app from the "hw Europe" or sth like that zip file (if you have one) and then just let it flash.
---------- Post added at 12:23 PM ---------- Previous post was at 12:21 PM ----------
Btw, if you did what i did a while back and played with oeminfo, you can grab someones c432 twrp backup of it, extract it and create a custom flash script.. I did this a while back so I can't give you exact instructions yet..
When I'll get home I'll do some research and make a video flashing my bricked p10 lite with dc Phoenix
Click to expand...
Click to collapse
Ok Thanks! Now all I need is hope...
Only one (maybe) last question, if i try to unbrick my phone but after the unbrick is still bricked, how do I get a refund?
zDerpyII_ said:
Now what I have to do? I never used DC Pheonix… if someone can use it please pm me.
Click to expand...
Click to collapse
zDerpyII_ said:
Ok Thanks! Now all I need is hope...
Only one (maybe) last question, if i try to unbrick my phone but after the unbrick is still bricked, how do I get a refund?
Click to expand...
Click to collapse
You ask for it at the forums, just make sure you buy with PayPal, not sure for the credit cards
davidhozic said:
You ask for it at the forums, just make sure you buy with PayPal, not sure for the credit cards
Click to expand...
Click to collapse
Ok thanks, maybe i'll unbrick the phone :fingers-crossed:
zDerpyII_ said:
Ok thanks, maybe i'll unbrick the phone :fingers-crossed:
Click to expand...
Click to collapse
If you don't unbrick it, ask for the money back at the forums do NOT use PayPal's charge back tool
---------- Post added at 08:40 AM ---------- Previous post was at 08:37 AM ----------
zDerpyII_ said:
Ok thanks, maybe i'll unbrick the phone :fingers-crossed:
Click to expand...
Click to collapse
And you have 3 days to get the phone unbricked so i recommend trying multiple firmwares if one doesn't work

Hard bricked,only vibrates

Hello guys,i was trying to flash LOS and after many tries i hard bricked my phone.At start,screen wasnt turning on and phone vibrated sholtly every 1 sec.I did EDL and then flashed different roms but still phone just vibrates but for a bit longer.When i do EDL it gets recognised by pc.Also when i flash a rom before i try to boot,if i connect it to power the led is blinking.
I dont want to be this guy who opens a thread that has opened many times,but i couldnt figure out a solution whatsoever.Thanks in advance.
Did you try downgrade from pie to oreo? Can you enter fastboot mode?
I bricked my phone too. Nothing worked for me. I hope you have more luck.
How it got bricked? Did you read the whole tutorial ?
emiljano539 said:
How it got bricked? Did you read the whole tutorial ?
Click to expand...
Click to collapse
I tried to flash from a video in youtube and didnt work.My system was deleted so i tried flashing different roms,it let me flash stock android and when i rebooted it just vibrated.Looks like the first vibration is the same as when the phone boots and the rest are a bit longer.
degen1997 said:
I tried to flash from a video in youtube and didnt work.My system was deleted so i tried flashing different roms,it let me flash stock android and when i rebooted it just vibrated.Looks like the first vibration is the same as when the phone boots and the rest are a bit longer.
Click to expand...
Click to collapse
Does it let you to boot into twrp now? If yes try to flash the stock rom via twrp there is a version which you flash directly with twrp
emiljano539 said:
Does it let you to boot into twrp now? If yes try to flash the stock rom via twrp there is a version which you flash directly with twrp
Click to expand...
Click to collapse
Sadly it doesnt,i can flash roms though with edl mode and miflash,maybe i haven't tried the correct one yet?Do you know which rom i need to flash for stock android 7 with mi flash?I've seen that other people have had the same problem but dont know if anyone managed to get through it.
degen1997 said:
Sadly it doesnt,i can flash roms though with edl mode and miflash,maybe i haven't tried the correct one yet?Do you know which rom i need to flash for stock android 7 with mi flash?I've seen that other people have had the same problem but dont know if anyone managed to get through it.
Click to expand...
Click to collapse
Check it :https://forum.xda-developers.com/showpost.php?p=75711835&postcount=2
I hope it helps
degen1997 said:
Sadly it doesnt,i can flash roms though with edl mode and miflash,maybe i haven't tried the correct one yet?Do you know which rom i need to flash for stock android 7 with mi flash?I've seen that other people have had the same problem but dont know if anyone managed to get through it.
Click to expand...
Click to collapse
I was one of them. I was lucky though and got a new phone from the dealer. I followed all the threads with the same issue. Never saw one user who was able to solve it.
XtraWater said:
I was one of them. I was lucky though and got a new phone from the dealer. I followed all the threads with the same issue. Never saw one user who was able to solve it.
Click to expand...
Click to collapse
I was thinking about flashing a Rom because im in stock now only rooted... But you guys scared me
emiljano539 said:
I was thinking about flashing a Rom because im in stock now only rooted... But you guys scared me
Click to expand...
Click to collapse
I recommend you to read a lot about flashing custom ROMs before trying to do it.
LineageOS has a pretty explicit installing tutorial.
If you can get into fastboot mode there is hope.
Remember that you must have the bootloader unlocked.
my thread
emiljano539 said:
How it got bricked? Did you read the whole tutorial ?
Click to expand...
Click to collapse
Hi everyone, I have rooted Mi A1 (pie), I have a hard brick. but fixed, when flashing Rom with TWRP, my phone cannot receive the partition / 'cache', when root receives the message: error: 28, I need help, thank you very much

Categories

Resources