i'm trying to unlock the bootloader, but when i go to the developer option i can't enable the "OEM unlock" option because when i tap on it and insert the pin and then press activate, the option remain grey. Someone know how to solve?
install whit qfil cyanogen os , see a tutorial from internet to me happen the same and try to unlock and dont can do it. finally i brick my phone whitout any recovery soo dont do bad things . Use qfil .
Same here
thanos92 said:
i'm trying to unlock the bootloader, but when i go to the developer option i can't enable the "OEM unlock" option because when i tap on it and insert the pin and then press activate, the option remain grey. Someone know how to solve?
Click to expand...
Click to collapse
Could you solve it? I have the same problem
---------- Post added at 06:52 PM ---------- Previous post was at 06:34 PM ----------
thanos92 said:
i'm trying to unlock the bootloader, but when i go to the developer option i can't enable the "OEM unlock" option because when i tap on it and insert the pin and then press activate, the option remain grey. Someone know how to solve?
Click to expand...
Click to collapse
Could you solve it? I have the same problem
andrestl said:
Could you solve it? I have the same problem
---------- Post added at 06:52 PM ---------- Previous post was at 06:34 PM ----------
Could you solve it? I have the same problem
Click to expand...
Click to collapse
Same here, anyone with an idea?
Billytromp said:
Same here, anyone with an idea?
Click to expand...
Click to collapse
If you want to root, use adb method or all in one tool, both are preferred methods
i have the same problem. I noticed when clicking on "oem unlock" and the warning-message appears that when you don't click on "cancel" or "enable" but somewhere else, the warning message disappears and the "oem unlock" seems like enabled (switch is turned on). However when i leave the menu and open it up again, the oem unlock is disabled again. Seems like a bug.
i found an interesting article about how to get past the locked bootloader:
http://www.tech-and-dev.com/2016/06...ing-to-marshmallow-zui-lenovo-zuk-z1.html?m=1
With this method it seems that its possible to get twrp on the device. But im not sure if i can install for example CM14 via twrp when i have installed it on the device. Im afraid to brick my zuk z1.
xdddd23 said:
install whit qfil cyanogen os , see a tutorial from internet to me happen the same and try to unlock and dont can do it. finally i brick my phone whitout any recovery soo dont do bad things . Use qfil .
Click to expand...
Click to collapse
Do you have qfil package for cyanogen os?
mp_mogambo said:
****TO GO BACK TO STOCK*****
You only need qfil and install cyanogen os with it. Later enable OEM, unlock bootloader , install twrp... I don't faced more problems , I m in nuclear 7.1
Click to expand...
Click to collapse
thanos92 said:
i'm trying to unlock the bootloader, but when i go to the developer option i can't enable the "OEM unlock" option because when i tap on it and insert the pin and then press activate, the option remain grey. Someone know how to solve?
Click to expand...
Click to collapse
****TO UNLOCK BOOTLOADER*****
I AM STILL FACING SAME PROBLEM
PROBLEM IS STILL NOT SOLVED
THIS IS THE ALTERNATIVE
Its not just with cyanogen os
If you flash cm13/14.1 same problem occurs..
So here is what can you do download twrp qfil from below link
https://mega.nz/#!oB4jyJzR!YXegLqP9CkHZNhGklY0tBI8eh8meSo_rJZDKCDB2F5A
Flash it through qfil
Then flash zui 0.9 ther you will get unlock oem option
Then use this all in one tool
http://forum.xda-developers.com/zuk-z1/orig-development/tool-toolzukz1eng0-0-3-mauronofrio-t3332563
And unlock bootloader...
---------- Post added at 08:31 PM ---------- Previous post was at 08:29 PM ----------
****HOW TO GO BACK TO STOCK IN THIS CASE*****
I AM STILL FACING SAME PROBLEM
Its not just with cyanogen os
If you flash cm13/14.1 same problem occurs..
So here is what can you do download twrp qfil from below link
https://mega.nz/#!oB4jyJzR!YXegLqP9CkHZNhGklY0tBI8eh8meSo_rJZDKCDB2F5A
Flash it through qfil
Then flash zui 0.9 ther you will get unlock oem option
Then use this all in one tool
http://forum.xda-developers.com/zuk-z1/orig-development/tool-toolzukz1eng0-0-3-mauronofrio-t3332563
And unlock bootloader
But here is the problem
Even after unlocking bootloader
You cant flash COS using fastboot method
If you use all in one tool then you will get error as
*device locked*
And if you use commands then you will see error as
*invalid package*
So use http://builds.cyngn.com/factory/ham/cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394.zip
And you are back to stock...
---------- Post added at 08:34 PM ---------- Previous post was at 08:31 PM ----------
xdddd23 said:
mp_mogambo said:
****TO GO BACK TO STOCK*****
You only need qfil and install cyanogen os with it. Later enable OEM, unlock bootloader , install twrp... I don't faced more problems , I m in nuclear 7.1
Click to expand...
Click to collapse
Even if you go back
Problem stays the same
Click to expand...
Click to collapse
@mp_mogambo I reinstall cos12 for some reasons, and don't have the problem again. I flashed it via fastboot and qfil trying solve a battery problem.
[SOLVED]
Guys i found the way.....
https://mega.nz/#!RFUw2CbZ!GXS6KeOy_8n2y_rOBJUS5WJSP5kchODcGUF0U1TxYO8
Here is the qpst version of COS12.1-YOG4PAS3AJ
Flash it using qfil
Thats it done!!
Button works!!!!
If you want you can go back to 12.1-YOG4PAS39IG
use all in one tool
mp_mogambo said:
[SOLVED]
Guys i found the way.....
https://mega.nz/#!RFUw2CbZ!GXS6KeOy_8n2y_rOBJUS5WJSP5kchODcGUF0U1TxYO8
Here is the qpst version of COS12.1-YOG4PAS3AJ
Flash it using qfil
Thats it done!!
Button works!!!!
If you want you can go back to 12.1-YOG4PAS39IG
use all in one tool
Click to expand...
Click to collapse
I have the same issue with a brand new ZUK Z1.
I wanted to ask you: if I flash this rom with this qfil tool, am I going to lose all data from my device?
Is it like factory reset?
RASTAVIPER said:
I have the same issue with a brand new ZUK Z1.
I wanted to ask you: if I flash this rom with this qfil tool, am I going to lose all data from my device?
Is it like factory reset?
Click to expand...
Click to collapse
QFIL writes all partitions new, so yes you loose all data.
strongst said:
QFIL writes all partitions new, so yes you loose all data.
Click to expand...
Click to collapse
Hmm, then I would like to avoid that and I really can't understand why this bug happened at my device.
I am writing in other forums too and it looks really rare..
My device is brand new, and although I made 3 system updates, the issue was always there.
Sent from mTalk
I flashed ZUI 2.3 and had boot loops. Then I flashed COS via QFIL. Now I, cant access fastboot. Can any one help?
raghukcube said:
I flashed ZUI 2.3 and had boot loops. Then I flashed COS via QFIL. Now I, cant access fastboot. Can any one help?
Click to expand...
Click to collapse
Switch off the phone... Hold Volume up and down together and connect to PC
You will be in boot loader or fastboot mode
But in cos, in developer option there is option for advance boot menu... U can turn on that...
---------- Post added at 05:22 PM ---------- Previous post was at 05:18 PM ----------
RASTAVIPER said:
Hmm, then I would like to avoid that and I really can't understand why this bug happened at my device.
I am writing in other forums too and it looks really rare..
My device is brand new, and although I made 3 system updates, the issue was always there.
Sent from mTalk
Click to expand...
Click to collapse
I think this bug will occur once you jump to zui from cos...
mp_mogambo said:
I think this bug will occur once you jump to zui from cos...
Click to expand...
Click to collapse
Nope, no such case.
I just got the phone with CM.
Sent from my m1 note using Tapatalk
Related
Did any one find the solution for screen freezes issue after unlocking bootloader? I want to install custom roms/kernels but can't do so
Tried the 6 scripts by @ozank ... But no success...
I found many users facing this issue.
You just need to flash the custom recovery and relock the bootloader again.
smnshuvo said:
I found many users facing this issue.
You just need to flash the custom recovery and relock the bootloader again.
Click to expand...
Click to collapse
The phone doesn't boot if kernel and/or rom is custom(non stock based) and bootloader is relocked. It just shows a usb sign.
hpgramani said:
The phone doesn't boot if kernel and/or rom is custom(non stock based) and bootloader is relocked. It just shows a usb sign.
Click to expand...
Click to collapse
May be you are using an old file of tank042, some of the files available there are corrupted. Doesn't help to relock the bootloader.
I tried all possible solutions. Sadly, there's no way to fix this.
Throw your device in trash (I'll do this with my Zenfone)
leonardohenrique10 said:
I tried all possible solutions. Sadly, there's no way to fix this.
Throw your device in trash (I'll do this with my Zenfone)
Click to expand...
Click to collapse
Possibly not a good solution. I have my zenfone that even doesn't boot. No fastboot, no boot and recovery.
---------- Post added at 09:08 AM ---------- Previous post was at 09:07 AM ----------
hpgramani said:
Did any one find the solution for screen freezes issue after unlocking bootloader? I want to install custom roms/kernels but can't do so
Tried the 6 scripts by @ozank ... But no success...
Click to expand...
Click to collapse
leonardohenrique10 said:
I tried all possible solutions. Sadly, there's no way to fix this.
Throw your device in trash (I'll do this with my Zenfone)
Click to expand...
Click to collapse
Try the debrick method. It will recover the fastboot with its original source. Don't do this if your phone is not hard bricked.
It may brick your phone too.
Today I tried to flash the Feb update using Flashfire, like I did every month since I got the phone. As usual I downloaded the full factory image, select boot, system, vendor, cache, bootloader and radio. The first phase worked fine, but when it came to the bootloader there was an error about not having enough space. After it rebooted, nothing... black screen with no signs of any activity, not even when I plug in the charger! Tried holding the power for minutes, with all vol up/down combination, but nothing worked.
If I connect it to my laptop it gets detected as the infamous "Qualcomm HS-USB QDLoader 9008" under ports. I tried an old guide that uses QFIL, but I believe I need specific files or firmware for the 6P to use with it. Do I have a pretty paperweight or is there any hope to recover from this? If it helps I have an EFS backup I made months ago with TWRP.
Any help or suggestion is greatly appreciated
try this if your stuch in 9008 https://forum.xda-developers.com/nexus-6p/general/howtos-debrick-nexus-6p-stuck-edl-9008-t3552838
Thanks for the reply. The first link with the factory firmware doesn't work anymore. Do you know where I can get it?
Type in "Google factory images for Nexus 6p " they are published by Google just download and unzip with 7 zip then put in a directory and adb from that directory.
If the bootloader is locked you might be screwed.
Normally the first thing you do is unlock the bootloader then root it and install whatever rom or factory image you want. But never locked the bootloader after flashing anything because of there's a problem you can't reflash if the bootloaders locked and if it blackscreens then you can't access developers option to allow the flash to happen
dontbeweakvato said:
Type in "Google factory images for Nexus 6p " they are published by Google just download and unzip with 7 zip then put in a directory and adb from that directory.
If the bootloader is locked you might be screwed.
Normally the first thing you do is unlock the bootloader then root it and install whatever rom or factory image you want. But never locked the bootloader after flashing anything because of there's a problem you can't reflash if the bootloaders locked and if it blackscreens then you can't access developers option to allow the flash to happen
Click to expand...
Click to collapse
OP can't access bootloader anyway...
@MaxNXS you can download "nexus6p_fix_bricked" firmware using "Advanced Download Manager" ADM on PlayStore using its built-in browser with"desktop mode" enabled...
Worked for me...
Hope that helps...
I'm not sure if the firmware in question is the regular Google Factory Image.
Today's lesson... Don't use FlashFire for image flashing especially with a locked boot
---------- Post added at 08:55 PM ---------- Previous post was at 08:36 PM ----------
Try this https://forum.xda-developers.com/nexus-6p/general/howtos-debrick-nexus-6p-stuck-edl-9008-t3552838
It's to recover from EDL(9008) use a Google factory image
dontbeweakvato said:
Today's lesson... Don't use FlashFire for image flashing especially with a locked boot
---------- Post added at 08:55 PM ---------- Previous post was at 08:36 PM ----------
Try this https://forum.xda-developers.com/nexus-6p/general/howtos-debrick-nexus-6p-stuck-edl-9008-t3552838
It's to recover from EDL(9008) use a Google factory image
Click to expand...
Click to collapse
Thank you for sharing your wisdom. Who said the bootloader was locked btw? It wasn't!
Use miflash for the 9008 error
dontbeweakvato said:
Use miflash for the 9008 error
Click to expand...
Click to collapse
I have all the files provided by tenfar, but I get "cannot receive hello packet" when I try to flash with miflash
MaxNXS said:
I have all the files provided by tenfar, but I get "cannot receive hello packet" when I try to flash with miflash
Click to expand...
Click to collapse
Driver issue maybe
Ask @tenfar
Hey man. I'm in the same boat as you. Except the factory image flashed fine and I got into the OS as usual. But after starting the app updates, I tried waking it up 20 minutes later and nothing. Black screen since. XiaoMiFlash and QFIL complain about the usual sahara or firehose. Tried nexus6p_fix_brick and 8675_W00. Nothing works!
Mine went to update​ and never came on again. To top it off it was stollen from under my seat of my work truck so I have zero chance of getting another. Im all One plus from here on out. ?
Sent from my 5054N using XDA-Developers Legacy app
MaxNXS said:
I have all the files provided by tenfar, but I get "cannot receive hello packet" when I try to flash with miflash
Click to expand...
Click to collapse
hi, do you still have the files? I'm looking for the nexus6p_fix_bricked.zip file
Hello Redmi mates
Please help me..., my Redmi 3s pattern locked and i forgot it too,
but now need to hard reset its not entering recovery mode nor its
Not entering to Download mode/edl mode to flash
then what to do how to do please............
Fastmod work or not
Sent from my Redmi 3S using Tapatalk
If you have set up a Mi or Google account on your phone, you can go to Mi Cloud or Android Device Manager to reset your phone.
You need an EDL cable to boot into EDL with newest MIUI version
isarfb said:
Fastmod work or not
Sent from my Redmi 3S using Tapatalk
Click to expand...
Click to collapse
Fastboot and adb mode both are working and its detecting too
Same here, i cant boot into recovery or download mod.
I also forgot my pattern lock and want to flash stock rom.
Device - Redmi 3S Prime
Rom - MIUI Official Stock
Status - Locked Bootloader
Plz help me...
Hey guys just type command adb reboot recovery in adb folder you should boot to recovery else check device drivers
thippesh96 said:
Hello Redmi mates
Please help me..., my Redmi 3s pattern locked and i forgot it too,
but now need to hard reset its not entering recovery mode nor its
Not entering to Download mode/edl mode to flash
then what to do how to do please............
Click to expand...
Click to collapse
KHEMS91 said:
Same here, i cant boot into recovery or download mod.
I also forgot my pattern lock and want to flash stock rom.
Device - Redmi 3S Prime
Rom - MIUI Official Stock
Status - Locked Bootloader
Plz help me...
Click to expand...
Click to collapse
Today, my friend give me his redmi 3s with pattern locked (UBL), no edl, no dfc, and wanna HARD RESET the devices.
Guest what??? I'm successfully to wipe all data in his device, and now its now work just fine
I will soon update a .bat script to boot to edl mode just follow my thread https://forum.xda-developers.com/xiaomi-redmi-3s/how-to/bootloader-unlock-twrp-flashing-rooting-t3565558
SILF0X said:
Today, my friend give me his redmi 3s with pattern locked (UBL), no edl, no dfc, and wanna HARD RESET the devices.
Guest what??? I'm successfully to wipe all data in his device, and now its now work just fine
Click to expand...
Click to collapse
OmG Then How?......may be it is not updated to latest version? (MIUI)
I tried possible ways do it.... Only one balance is to make my own EDL cable for flashing
So... did you try as I said in post #3?
joe34 said:
So... did you try as I said in post #3?
Click to expand...
Click to collapse
Yes, it's work.
Thanks...
It is advisable to have a Mi Account or Google Account on the device for reasons just like this situation you are in. Also, you don't have to turn on OEM unlocking or USB debugging to reset your device from a Mi or Google Account.
Lemme ask you something, how do I know you are telling the truth? How do I know this isn't a stolen device? Is anyone thinking that they may be assisting a thief? I wonder.
BTW, I was addressing the OP, not you. It seems you have taken over the thread from the OP.
joe34 said:
So... did you try as I said in post #3?
Click to expand...
Click to collapse
I tried both
it shows I am not turned on in settings
---------- Post added at 07:29 AM ---------- Previous post was at 07:27 AM ----------
Thank you guys
Finally I did it..........:highfive: with EDL cable
---------- Post added at 07:31 AM ---------- Previous post was at 07:29 AM ----------
joe34 said:
It is advisable to have a Mi Account or Google Account on the device for reasons just like this situation you are in. Also, you don't have to turn on OEM unlocking or USB debugging to reset your device from a Mi or Google Account.
Lemme ask you something, how do I know you are telling the truth? How do I know this isn't a stolen device? Is anyone thinking that they may be assisting a thief? I wonder.
BTW, I was addressing the OP, not you. It seems you have taken over the thread from the OP.
Click to expand...
Click to collapse
Thank you for your concern.........:highfive:
Hi, I decided to download a stock oem, because I don't find the stock firmware of my phone, and after flash in it, the bootloader unlock message became red. I don't know why the color changed but a message in red don't sounds good. If someone know about that, please explain me how to do to fix it.
EDIT: When I flashed a system i had sparse error but now I have command not allowed, why ?
Waverup said:
Hi, I decided to download a stock oem, because I don't find the stock firmware of my phone, and after flash in it, the bootloader unlock message became red. I don't know why the color changed but a message in red don't sounds good. If someone know about that, please explain me how to do to fix it.
EDIT: When I flashed a system i had sparse error but now I have command not allowed, why ?
Click to expand...
Click to collapse
If you completely lock bootloader and install stock rom and recovery, the message will go away.
Command not allowed means that the bootloader is not completely unlocked. Check your settings -> developer options -> enable OEM unlocking. If this is off, turn it on and commands will work
Ty for those informations, but I have a problem, I flash another system and now I haven't acess to developer settings (when i click on it, I return at the home page). Can I enable OEM with an application or even an erase of system?
Waverup said:
Ty for those informations, but I have a problem, I flash another system and now I haven't acess to developer settings (when i click on it, I return at the home page). Can I enable OEM with an application or even an erase of system?
Click to expand...
Click to collapse
Hmm. I would try to flash your system again using the 3 buttons method
---------- Post added at 08:46 AM ---------- Previous post was at 08:46 AM ----------
maartenw8 said:
Hmm. I would try to flash your system again using the 3 buttons method
Click to expand...
Click to collapse
This will also remove the red warning probably
if you flashed something else you don't need to enable the setting, it will always stay enabled after the first time enabling it
I tried to flash many system firmware of p9 lite but just one worked (in this version they show me in the build number NRD90m), so I flashed a oeminfo and wanted to install the same version of the oeminfo but the forced update didn't worked, I think that my sd card is too slow (class 4). If someone have a solution for fixing this problem it would be great. Thanks for the help guys.
Hello,
I just flashed TWRP and LineageOs-v16.0-UNOFFICIAL from this https://forum.xda-developers.com/samsung-a-series/orig-development/rom-lineageos-v16-0-unofficial-samsung-t3892229 and after reboot the screens shows "Custom binary blocked by FRP Lock.".
I bought this mobile phone completely legal. I read a lot about this, but I do not really understand what the purpose this functionality has.
When I started flashing TWRP on it, I haven't done a "Factory Reset" in the original Firmware. So I of course don't know the Google Account from the previous owner. I also don't now why the hell the Google Account is responsible for this.
I read, that with flashing Stock Rom and activating "OEM Unlocking" and the problem should be solved. I have never heared of "OEM unlocking" before, on my other phones I don't even have this point in the developer options.
Is this the solution? And where can I get a Stock Rom which will work?
exaveal said:
Hello,
I just flashed TWRP and LineageOs-v16.0-UNOFFICIAL from this https://forum.xda-developers.com/samsung-a-series/orig-development/rom-lineageos-v16-0-unofficial-samsung-t3892229 and after reboot the screens shows "Custom binary blocked by FRP Lock.".
I bought this mobile phone completely legal. I read a lot about this, but I do not really understand what the purpose this functionality has.
When I started flashing TWRP on it, I haven't done a "Factory Reset" in the original Firmware. So I of course don't know the Google Account from the previous owner. I also don't now why the hell the Google Account is responsible for this.
I read, that with flashing Stock Rom and activating "OEM Unlocking" and the problem should be solved. I have never heared of "OEM unlocking" before, on my other phones I don't even have this point in the developer options.
Is this the solution? And where can I get a Stock Rom which will work?
Click to expand...
Click to collapse
Hello. Can you tell me what your variant of the phone is (SM-A510XX)(what are the numbers or letters which replace the "XX".
With the variant, I can help you get the stock rom and give you a guide on how to flash the stock rom via Odin. Hope this helps.:good:
InfernoWolf19 said:
Hello. Can you tell me what your variant of the phone is (SM-A510XX)(what are the numbers or letters which replace the "XX".
With the variant, I can help you get the stock rom and give you a guide on how to flash the stock rom via Odin. Hope this helps.:good:
Click to expand...
Click to collapse
@InfernoWolf19 i have a A510FXX7CRJ6 on which i want to flash stock android 7 on, can u tell me how or where i can find images for that? I tried sammobile.com, but u have to fill in a creditcardnumber there in order to be able to download an image and i dont have that.
Cainnub said:
@InfernoWolf19 i have a A510FXX7CRJ6 on which i want to flash stock android 7 on, can u tell me how or where i can find images for that? I tried sammobile.com, but u have to fill in a creditcardnumber there in order to be able to download an image and i dont have that.
Click to expand...
Click to collapse
No you don't need payment method for downloading from sammobile, Only needed if you want to download at high speeds. Provide me the link where you found your firmware from sammobile. With that link, I can download it, upload it to high speed servers, and then give you the link where you can download. I am asking for the link as I don't know what country you live in and therefore don't know the correct firmware. By the what I mean SM-A510xx, replace the "xx" and give the country code or the country you live in so that I can find the firmware as the number you gave me (A510FXX7CRJ6) is not what I meant and that number is a firmware number and not the device number.
ok, so after your post i tried another time to get an account on sammobile.com and now i succeeded. So the download is running atm. But the next question is; how am i supposed to get by the FRP lock? Cuz i tried to flash TWRP on it with odin, but got stopped by the FRP lock.
Cainnub said:
ok, so after your post i tried another time to get an account on sammobile.com and now i succeeded. So the download is running atm. But the next question is; how am i supposed to get by the FRP lock? Cuz i tried to flash TWRP on it with odin, but got stopped by the FRP lock.
Click to expand...
Click to collapse
No. You don't need TWRP to flash stock rom via Odin. Just get the phone into download mode and flash the stock firmware via odin. You flash it the same way as you flash TWRP but just use the stock firmware. Hope this helps. Also, please make sure that the firmware is correct and if not, your phone will be stuck in a boot loop.
InfernoWolf19 said:
No. You don't need TWRP to flash stock rom via Odin. Just get the phone into download mode and flash the stock firmware via odin. Hope this helps. Also, please make sure that the firmware is correct and if not, your phone will be stuck in a boot loop.
Click to expand...
Click to collapse
I know i dont need TWRP, what i meant was that i just hope the FRP lock wont stop the install cuz it did when i tried to flash TWRP on it. Thank you for ur quick replies though!
Cainnub said:
I know i dont need TWRP, what i meant was that i just hope the FRP lock wont stop the install cuz it did when i tried to flash TWRP on it. Thank you for ur quick replies though!
Click to expand...
Click to collapse
Oh. Ok I belive that the FRP lock won't stop the install as the phone is in download mode and the fact that you are flashing stock firmware.
---------- Post added at 09:32 PM ---------- Previous post was at 09:20 PM ----------
Cainnub said:
I know i dont need TWRP, what i meant was that i just hope the FRP lock wont stop the install cuz it did when i tried to flash TWRP on it. Thank you for ur quick replies though!
Click to expand...
Click to collapse
How is the download going? Really slow right? 15kb... and in chrome - I had to download my firmware at 5kb :crying:
---------- Post added at 10:08 PM ---------- Previous post was at 09:32 PM ----------
Cainnub said:
I know i dont need TWRP, what i meant was that i just hope the FRP lock wont stop the install cuz it did when i tried to flash TWRP on it. Thank you for ur quick replies though!
Click to expand...
Click to collapse
Good luck on flashing. Hope it is successful.
---------- Post added at 10:08 PM ---------- Previous post was at 10:08 PM ----------
Yup the download went very slow, took 2 hours to complete. So i succeeded with flahsing stock android on the phone. But when i booted the phone, it instantly told me that an unauthorised wipe took place and before i could continue with starting the phone, i had to log in with the google account which was on the phone before the wipe. So can any1 help me with this, cuz im out of options here.
Cainnub said:
Yup the download went very slow, took 2 hours to complete. So i succeeded with flahsing stock android on the phone. But when i booted the phone, it instantly told me that an unauthorised wipe took place and before i could continue with starting the phone, i had to log in with the google account which was on the phone before the wipe. So can any1 help me with this, cuz im out of options here.
Click to expand...
Click to collapse
You have two options. The google account has a cool off period and I read that if you wait 24 hours, the login will be gone. However, on old android phones, you have to wait 72 hours. But if you go to a Samsung service center, they will remove the logins for free.
I found this website where you can bypass the lock but I am not sure if it works. Do the samsung bypass and not any other brands. Try it anyway: https://www.unlockunit.com/blog/bypass-google-account-verification-factory-reset-protection/
Cainnub said:
Yup the download went very slow, took 2 hours to complete. So i succeeded with flahsing stock android on the phone. But when i booted the phone, it instantly told me that an unauthorised wipe took place and before i could continue with starting the phone, i had to log in with the google account which was on the phone before the wipe. So can any1 help me with this, cuz im out of options here.
Click to expand...
Click to collapse
Did you get pass the login screen?
No I haven't. I just checked that website u posted, but apparently it doesn't work well with the browser on my mobile. So I'll check it out later on my laptop. I'll let u know, how it went.
Cainnub said:
No I haven't. I just checked that website u posted, but apparently it doesn't work well with the browser on my mobile. So I'll check it out later on my laptop. I'll let u know, how it went.
Click to expand...
Click to collapse
How did it go?