Related
How to flash the firmware (5 files in archive) to your s7edge?
AP, CP & BL I understand, but the 2 CSC-files...?
CSC -> there's a PIT inside and will wipe your device
HOME_CSC -> the data should stay on your device
Today I tried to update with HOME_CSC, everything was OK, but at the end Odin 3.10.7 FROZE at "meta-data" (this folder is in the HOME_CSC file): nothing happened anymore and I had to pull the cable
Smart Switch didn't recognize my S7edge anymore for the "Emergency Firmware Repair"!
Luckely, Odin did recognize my device and could install the firmware with the "normal" CSC-file and afterwards my device was reset...
I hope someone has a solution on this, because I don't want to install everytime again and again...
+1
same happened to me. I have the same question...
cristy78 said:
+1
same happened to me. I have the same question...
Click to expand...
Click to collapse
How did you get your device working again?
henklbr said:
How did you get your device working again?
Click to expand...
Click to collapse
Well, the flash went just fine. No problems except the device reset at factory settings. As brand new one....
But of course I would like to know how to flash without resetting the device.
I had the same problem yesterday when used Home_CSC... flashed again with normal CSC and went back to normal with a formated user data
We really need a solution to that... What would happen if we skipped the CSC file when flashing thru ODIN?
Flashing with CSC and not home_CSC will also reset your CSC.
Eg: I was on VODAFONE Romania and flashed stock unbranded using CSC. The result was I lost my ROM (from Romania) CSC, and defaulted to XEO from the multi CSC.
In this situation you cannot go back to your original CSC even after flashing using Smart Switch.
Rooting is the only option then and that will trip Knox.
Sent from my SM-G935F using Tapatalk
anybody figured this out?
Just had the same problem flashing with HOME_CSC it got stuck in ODIN and had to pull the cable.
Had to turn off phone and boot again in download mode to flash again with a straight CSC.
insaned said:
Just had the same problem flashing with HOME_CSC it got stuck in ODIN and had to pull the cable.
Had to turn off phone and boot again in download mode to flash again with a straight CSC.
Click to expand...
Click to collapse
Have a look at this thread:
OFFICIAL STOCK Firmware-update (Odin) thread Samsung GALAXY S7Edge SM-G935F
henklbr said:
Have a look at this thread:
OFFICIAL STOCK Firmware-update (Odin) thread Samsung GALAXY S7Edge SM-G935F
Click to expand...
Click to collapse
Thanks for the heads up. good job
What is the benefit of flashing Home_CSC instead of just CSC?
BCSC said:
What is the benefit of flashing Home_CSC instead of just CSC?
Click to expand...
Click to collapse
+1 for that question...
If some can clear us out whats inside of both files and diffrences it would be great ...
V_B said:
+1 for that question...
If some can clear us out whats inside of both files and diffrences it would be great ...
Click to expand...
Click to collapse
CSC contains an instruction that allow Odin to wipe the DATA
Code:
--update_package=CACHE:recovery/sec_csc.zip
--carry_out=csc_factory
--wipe_data
HOME_CSC contains instruction only to allow wipe of cache BUT the original HOME_CSC can cause Odin to freeze at the end of the flashing process.
Code:
--update_package=CACHE:recovery/sec_csc.zip
--carry_out=csc_home
--wipe_cache
That's why you need to modify the HOME_CSC using the CYGWIN tool.
Just dont flash the home csc. I never did it. Everything work greats.
mercifool said:
Just dont flash the home csc. I never did it. Everything work greats.
Click to expand...
Click to collapse
HOME_CSC is supported on Odin version 3.11 or later. It's okay to flash it now.
Sorry to revive this thread but when a downgrade is done from Nougat back to Marshmallow a factory reset via recovery must be required if flashing HOME_CSC. Otherwise just use normal CSC on downgrade.
thank you
Samsung S6 Active G890A
Hello,
Where do I find a HOME_CSC file for Samsung S6 Active SM-G890A device?
Hi Guys
i have a question i want to flash my galaxy s7 edge with Odin i want to ask that there is some confusion between HOME-CSC and CSC simple
1-Can you please guide me which one i need to select to flash my phone?
2-What is Difference between the HOME-CSC and CSC?
3-What happened with both of them if i will flash with one of them ?
Guys ill wait for your reply ......hope so you will guide me in this matter
let's say you wanna update your phone without wiping the data u have on it. you use the home csc. If u have custom recovery and custom rom and you wanna go back to stock firmware you flash the csc file.
Sent from my SM-G935F using XDA-Developers mobile app
ecg803 said:
let's say you wanna update your phone without wiping the data u have on it. you use the home csc. If u have custom recovery and custom rom and you wanna go back to stock firmware you flash the csc file.
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
I am already on the Stock and with the stock recovery if i will select the CSC simple what will happen is there any DAMAGE to my phone???
the csc file will just wiped the whole phone of your data just like day u bought it.
Sent from my SM-G935F using XDA-Developers mobile app
ecg803 said:
the csc file will just wiped the whole phone of your data just like day u bought it.
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
Then CSC simple is good i want wipe all of the data thanks a LOT...........one more question if you have a answer about that i saw error in recovery
E: CANT MOUNT / DATA (invalid aurgument)
is there any soln about this issue what you said about this error.....but this error did nothing to my phone my phone is working normally
your answer is required
that is normal.
Sent from my SM-G935F using XDA-Developers mobile app
There should be a guide on this...!
But what's the difference between CSC and HOME_CSC?
treysis said:
But what's the difference between CSC and HOME_CSC?
Click to expand...
Click to collapse
Didn't he already answer that question?
Home_CSC: Flash the firmware without wiping the data (if you just want to update the ROM)
CSC: Flash the firmware along with a complete wipe including data (mostly used in cases like bricked phones or Go-Back-To-Stock situations)
I always backup data and do a clean install with CSC ! Its recommended.
When I wanted to swap the firmware from (V) Verizon to (U) Unlocked, I had to use CSC simple, the Home_CSC gave an error. So I assumed the existing data cannot be "saved" when firmware are of different types.
I have asked about this and I wasn't that lucky to get an answer, so I just tried it (trial and error).
However, I think the data wipe is just a side-effect, not the purpose of CSC. Changing the CSC will always wipe data, including any custom software from the previous carrier:
https://productioncommunity.publicm...ung-Phone-Info/m-p/53208/highlight/true#M6228
In my case the original Home_CSC, had only VZW (Verizon) code available. The new unlocked firmware brought in 15 different CSC codes that can be applied when a SIM from one of those providers is introduced in the phone. Phone INFO shows those codes.
@NaJeEb303 He did answer, but he didn't make it clear. Only after knowing the answer I can understand what he meant. So thanks to you for clarifying.
adnanandhoney said:
Hi Guys
i have a question i want to flash my galaxy s7 edge with Odin i want to ask that there is some confusion between HOME-CSC and CSC simple
1-Can you please guide me which one i need to select to flash my phone?
2-What is Difference between the HOME-CSC and CSC?
3-What happened with both of them if i will flash with one of them ?
Guys ill wait for your reply ......hope so you will guide me in this matter
Click to expand...
Click to collapse
Brother when you are flashing firmware with same csc as your previous firmware then you can use Home_csc and if you are flashing different csc firmware then you have to use file which starts with csc. You will lose data when not using home_csc because it contains different partition information and flashing this will delete you previous partition resulting loss of data but a successful flashing if you are stuck with home_csc. Hope you got your answer.
where do i find the HOME_CSC file?
Hey all,
i just used Odin3-v3.13.1 to upgrade from:
G935FXXU2EREM - GALAXY S7 EDGE SM-G935F DBT GERMANY
to:
G935FXXU2ERG2 - GALAXY S7 EDGE SM-G935F DBT GERMANY
First i selected all AP, BL, CP and HOME_CSC and started flasching. At the very last step (think it was the csc part) it failed.
The Phone said i thould have to use SmartSwitch to get Recovery. So i just opened odin again and just selected AP, BL and CP no csc this time.
That worked. Phone booted, did a bit upgrading and optimizing and now iam on 01.July upgraded. All fine!
But now iam really confused about csc in general.. what is it doing? And is it safe to just leave any csc file empty in odin when doing an upgrade?
No idea? Maybe i should better start a new fred for that
how can i get home_csc for samsung note 3 n900? thanks
How to modify CSC to prevent wipe of my files?
Hello!
How to wipe android OS, but keep my files, like documents, pictures, audio and video in SAMSUNG SM-N9005 memory? 'Android system' package was disabled in 'packagedisabler pro', and now SM-N9005 sticks during booting with animated SAMSUNG logo. Flashing with HOME firmware does not recover because it does not enable 'Android system' package.
How to modify CSC to prevent wipe of my files?
or
How to modify HOME_CSC to wipe android OS but keep my files?
Thanks!
I was answered this on Reddit
I started a thread on Reddit about how to get OTA after stock ROM flash, and the guy said that if I used the CSC file in the CSC field in Odin, I should still get OTA, so I guess it just means you would get OTAs on it. I think it depends on other factors such as build number and others too though, so I would research first.
NaJeEb303 said:
Didn't he already answer that question?
Home_CSC: Flash the firmware without wiping the data (if you just want to update the ROM)
CSC: Flash the firmware along with a complete wipe including data (mostly used in cases like bricked phones or Go-Back-To-Stock situations)
I always backup data and do a clean install with CSC ! Its recommended.
Click to expand...
Click to collapse
my tab s4 is factory unlocked. I'm currently using a tmobile sim. will flashing either of these remove the unlock? looking to flash android pie
i have done everything as said and my process has fail for s7 galaxy. how do revert back or redo?
After all the hype I decided to try out the BTU nougat firmware, flashed the AP file via odin. Found out its buggy for me so I installed back stock 6.0.1 firmware for baltics, the same I had when I bought the phone. I also did wipe data. Now Galaxy Care says my device isnt compatible for it and Samsung Members app says my device isnt supported. What did I do wrong?
By the way before doing data wipe when my phone booted up after installing back to 6.0.1, it asked me for some.kind of password. I downloaded the firmware from sammobile.
Edit: maybe it was because I selected only the AP file in odin when i installed back the SEB firmware?
Sent from my SM-G935F using XDA-Developers Legacy app
archzz said:
After all the hype I decided to try out the BTU nougat firmware, flashed the AP file via odin. Found out its buggy for me so I installed back stock 6.0.1 firmware for baltics, the same I had when I bought the phone. I also did wipe data. Now Galaxy Care says my device isnt compatible for it and Samsung Members app says my device isnt supported. What did I do wrong?
By the way before doing data wipe when my phone booted up after installing back to 6.0.1, it asked me for some.kind of password. I downloaded the firmware from sammobile.
Edit: maybe it was because I selected only the AP file in odin when i installed back the SEB firmware?
Sent from my SM-G935F using XDA-Developers Legacy app
Click to expand...
Click to collapse
You need to flash all files via Odin when doing this.
AP, BL, CP and CSC!
When reverting back and forth between completly different room you need a clean and install, and will loose personal media like settings, text pictures and so on, if not backed up.....
And after the FIRMWARE has booted, you turn OFF the phone and boot into the orginal recovery again. Flash the cache/dalvik and then factory reset, restart!
So yes
Like @LyLu said, you need to flash all 4 files, not just AP.
Also, if you are asked for a password and haven't set one, the default password is default_password
Unfortunately default_password is incorrect, does not accept it.
Which password is required?
Thanks.
Here are the T-Mobile S8 stock G950USQS2BQL1 Odin files.
Model: SM-G950U
Model Name: Galaxy S8
Country: USA (T-Mobile) (TMB)
Version: Android 7.0
Security Patch Level: December 1st, 2017
Product code: TMB
PDA: G950USQS2BQL1
CSC: G950UOYN2BQL1
Download here: G950USQS2BQL1
hi, i was on this build before side loading U2CRA1 which turned out to be another beta build and not official. can i use the latest odin 3.12.7 to flash back to this build? what other requirements are needed to flash back to BQL1? im 100 percent stock, never rooted never unlocked just plain stock with the exception of side loading U2CRA1. thanks in advance
maddoggin said:
hi, i was on this build before side loading U2CRA1 which turned out to be another beta build and not official. can i use the latest odin 3.12.7 to flash back to this build? what other requirements are needed to flash back to BQL1? im 100 percent stock, never rooted never unlocked just plain stock with the exception of side loading U2CRA1. thanks in advance
Click to expand...
Click to collapse
Yes, you can use this firmware to flash back to stock 2BQL1 via ODIN . If you have t-mobile, flash USERDATA, BL, AP, CSC or HOME CSC to retain your data, otherwise your data will be deleted. Be sure to back up your data before flashing. If your carrier is not t-mobile, flash BL,AP,CSC or HOME CSC and don't flash USERDATA. If you have further questions, let me know.
bboii86 said:
Yes, you can use this firmware to flash back to stock 2BQL1 via ODIN . If you have t-mobile, flash USERDATA, BL, AP, CSC or HOME CSC to retain your data, otherwise your data will be deleted. Be sure to back up your data before flashing. If your carrier is not t-mobile, flash BL,AP,CSC or HOME CSC and don't flash USERDATA. If you have further questions, let me know.
Click to expand...
Click to collapse
how do i flash user data? i understood i should flash BL,AP,CP and CSC. i dont see a slot in odin for userdata?
maddoggin said:
how do i flash user data? i understood i should flash BL,AP,CP and CSC. i dont see a slot in odin for userdata?
Click to expand...
Click to collapse
It would be under UMS for USERDATA
bboii86 said:
It would be under UMS for USERDATA
Click to expand...
Click to collapse
so once again i would flash BL, AP, CP, CSC and UMS (USERDATA). i flashed BL, AP, CP and CSC_OYN earlier and i got E:ensure_path_unmounted failed to unmount/efs (device or resource busy) i booted up anyway and then sideloaded CRA9 and got same error during flash in recovery but everything seems to running fine. imei is shown and everything good. but in recovery i have this
heres a better photo
maddoggin said:
so once again i would flash BL, AP, CP, CSC and UMS (USERDATA). i flashed BL, AP, CP and CSC_OYN earlier and i got E:ensure_path_unmounted failed to unmount/efs (device or resource busy) i booted up anyway and then sideloaded CRA9 and got same error during flash in recovery but everything seems to running fine. imei is shown and everything good. but in recovery i have this
Click to expand...
Click to collapse
Yes, in ODIN you would flash BL, AP, CP, CSC & UMS (USERDATA). (Only for T-Mobile) For the second part, what I recommend doing is once you flash the stock firmware, go to recovery, wipe data & cache and reboot. Once it reboots, turn off the device, go to recovery and sideload CRA9 from SD card. Once the installation completes, do the same process in recovery wipe data & cache, reboot and you should be fine.
bboii86 said:
Yes, in ODIN you would flash BL, AP, CP, CSC & UMS (USERDATA). (Only for T-Mobile) For the second part, what I recommend doing is once you flash the stock firmware, go to recovery, wipe data & cache and reboot. Once it reboots, turn off the device, go to recovery and sideload CRA9 from SD card. Once the installation completes, do the same process in recovery wipe data & cache, reboot and you should be fine.
Click to expand...
Click to collapse
thanks man! appreciate your help!
maddoggin said:
heres a better photo
Click to expand...
Click to collapse
What is your original carrier? Go to settings, go to about phone, software information & then check service provider if your device is originally from t-mobile it would look like this TMB/TMB/TMB the last one is the stock Odin firmware you should be flashing.
Last 3 is original device carrier
TMB - T-Mobile
ATT - AT&T
SPR- Sprint
VZW Verizon
maddoggin said:
thanks man! appreciate your help!
Click to expand...
Click to collapse
No problem.
bboii86 said:
What is your original carrier? Go to settings, go to about phone, software information & then check service provider if your device is originally from t-mobile it would look like this TMB/TMB/TMB the last one is the stock Odin firmware you should be flashing.
Last 3 is original device carrier
TMB - T-Mobile
ATT - AT&T
SPR- Sprint
VZW Verizon
Click to expand...
Click to collapse
TMB/TMB/TMB
---------- Post added at 05:13 AM ---------- Previous post was at 05:11 AM ----------
"the last one is the stock Odin firmware you should be flashing"
What do you mean by that?
maddoggin said:
TMB/TMB/TMB
---------- Post added at 05:13 AM ---------- Previous post was at 05:11 AM ----------
"the last one is the stock Odin firmware you should be flashing"
What do you mean by that?
Click to expand...
Click to collapse
Sometimes people flash the wrong stock files that doesn't belong to the device and get errors. That's what I was referring to.
problems
i just got an s8 from a friend thats in factory binary, id like to get some sort of usable rom/firmware on there as my s6 is starting to die out. i downloaded odin 3.1.3 and it give me an error whenever i try to flash twrp "sha256 fail" so i downloaded the modified prince version and i dont get that code however i get "FAIL! log auth" im really stuck and dont know my way out please help
bboii86 said:
Yes, in ODIN you would flash BL, AP, CP, CSC & UMS (USERDATA). (Only for T-Mobile) For the second part, what I recommend doing is once you flash the stock firmware, go to recovery, wipe data & cache and reboot. Once it reboots, turn off the device, go to recovery and sideload CRA9 from SD card. Once the installation completes, do the same process in recovery wipe data & cache, reboot and you should be fine.
Click to expand...
Click to collapse
doesnt give me option to use the ums (USERDATA) button. its greyed out! even after opening all the other files!
i opened up the text file for odin and switched from 0 to 1 like all the others. is this correct?
but i also see an option for userdata thats also checked to 0 your sure i can flash the userdata file on ums button?
bluntmedia said:
i just got an s8 from a friend thats in factory binary, id like to get some sort of usable rom/firmware on there as my s6 is starting to die out. i downloaded odin 3.1.3 and it give me an error whenever i try to flash twrp "sha256 fail" so i downloaded the modified prince version and i dont get that code however i get "FAIL! log auth" im really stuck and dont know my way out please help
Click to expand...
Click to collapse
Do you know what's the original carrier? That way I can give you a link with the stock firmware of that specific carrier.
maddoggin said:
doesnt give me option to use the ums (USERDATA) button. its greyed out! even after opening all the other files!
i opened up the text file for odin and switched from 0 to 1 like all the others. is this correct?
but i also see an option for userdata thats also checked to 0 your sure i can flash the userdata file on ums button?
Click to expand...
Click to collapse
There's some Odin that allow and don't allow you to use UMS. I will provide you with a link of the Odin I use that supports UMS flashing.
Download here:
Odinv3.12.17
maddoggin said:
so once again i would flash BL, AP, CP, CSC and UMS (USERDATA). i flashed BL, AP, CP and CSC_OYN earlier and i got E:ensure_path_unmounted failed to unmount/efs (device or resource busy) i booted up anyway and then sideloaded CRA9 and got same error during flash in recovery but everything seems to running fine. imei is shown and everything good. but in recovery i have this
Click to expand...
Click to collapse
I'm getting this same error after flashing 2BQL1 and even after sideloading CRB1. The message also shows up when I boot into recovery. Were you able to find a fix?
Philosuffer said:
I'm getting this same error after flashing 2BQL1 and even after sideloading CRB1. The message also shows up when I boot into recovery. Were you able to find a fix?
Click to expand...
Click to collapse
Unfortunately not, everything seems to still be good but I did find a thread in the Galaxy S7 forum about the issue but the issue they have is more complex. The IMEI on their phone is all zeros and mine still shows numbers. I've tried factory reset thru recovery and clear cache but still have the same issue. I think maybe it has to do with different bootloader or something. Not sure. If you find a fix this let me know.
---------- Post added at 02:02 AM ---------- Previous post was at 01:47 AM ----------
https://forum.xda-developers.com/galaxy-s8/help/eensurepathunmounted-failed-to-unmount-t3690272
Question, why when I attempt to download the stock room file at the beginning of this thread it say it's trash by owner.
Hello I have the S7 edge g935f nougat 7.0 , I flashed the twrp last version, got into twrp, flashed the SuperSU, and then after reboot said verification failed etc.. I flashed a stock rom which has the December security patch probably that's the reason why says that... I tried to flash the rom again, then flash first a dm-verify zip and then SuperSU (tried with magisk too) but nothing changed.. what to do ?
This is for Exynos
1.Turn on Odin3 and connect your phone to PC in Download Mode (hold "Power & Home & Volume -" for a while).
2.Download lastest custom recovery correctly for your model from offical TWRP website then unpack zip to get flashable *.tar file.
3.Put twrp-3.2.1-x-xxxxxx.img.tar file to "AP" tab.
4.In Options tab check only "F. Reset Time". ATTENTION: rest options must be UNCHECKED!!!
5.Press "Start" and wait till finish flashing (you will see "PASS" info as on THAT screenshot when flashing will be finished).
6.Press and hold "Power & Home & Volume -" for a while to reboot your device. Directly while phone rebooting (when display is turned off/black) press and hold "Power & Home & Volume +" till custom TWRP recovery menu shows up.
7.Go to "Wipe" menu, and swipe to right for "Factory Reset".
8.Now you can flash any zip file to your phone, so all custom ROM's & kernels & mods etc and also you can ROOT with lastest Magisk.zip or SuperSU.zip, etc.
Click to expand...
Click to collapse
Point 7 will wipe ALL youre data, but is a necessary step to root your device.
https://forum.xda-developers.com/galaxy-s7/how-to/guide-onelatest-stock-fw-csc-root-t3702963
jbakers said:
This is for equinox
Point 7 will wipe ALL youre data, but is a necessary step to root your device.
https://forum.xda-developers.com/galaxy-s7/how-to/guide-onelatest-stock-fw-csc-root-t3702963
Click to expand...
Click to collapse
What is equinox?
I want to flash the stock rom not a custom one because it's says you can flash any custom rom , after all steps can I flash again the stock rom ?
after i swipe right to factory reset my device says failed to mount '/data' (invaliod argument)
...done
Unable to mount storage
tried to flash the no-verify-opt-encryption zip but nothing changed ..
You need to go into TWRP straight after installing it and do the following:
Click Wipe --> Click right button that says "Format Data".
Type "yes" to continue
If that doesnt help:
How to solve problem with mounting "/data" in TWRP?
1.Flash THAT package via TWRP or go to CF-Auto-Root website, download package for your model and stock firmware on which you are/were and just flash it via Odin3
StonebridgeGr said:
What is equinox?
Click to expand...
Click to collapse
Sorry Exynos, was half asleep...
Its which SOC it uses:
Samsung Exynos 8890 Model[edit]
SM-G935F (International Single Sim)
SM-G935FD (International Dual Sim)
SM-G935W8 (Canada)
SM-G935S (South Korea SK Telecom)
SM-G935K (South Korea KT)
SM-G935L (South Korea LG U+)
Qualcomm Snapdragon 820 Model[edit]
SM-G9350 (China Open Model, Hong Kong)
SM-G935V (USA Verizon Wireless)
SM-G935A (USA AT&T)
SM-G935P (USA Sprint)
SM-G935T (USA T-Mobile US)
SM-G935U (USA Samsung Unlocked)
SM-G935R4 (USA US Cellular)
SC-02H (Japan NTT DoCoMo)
SCV33 (Japan KDDI au)
SM-G935U (USA Unlocked)
https://en.wikipedia.org/wiki/Samsung_Galaxy_S7#Galaxy_S7_Edge
jbakers said:
You need to go into TWRP straight after installing it and do the following:
Click Wipe --> Click right button that says "Format Data".
Type "yes" to continue
If that doesnt help:
How to solve problem with mounting "/data" in TWRP?
1.Flash THAT package via TWRP or go to CF-Auto-Root website, download package for your model and stock firmware on which you are/were and just flash it via Odin3
Click to expand...
Click to collapse
After i flash that file i can go to the twrp again and flash the magisk or supersu??
jbakers said:
You need to go into TWRP straight after installing it and do the following:
Click Wipe --> Click right button that says "Format Data".
Type "yes" to continue
If that doesnt help:
How to solve problem with mounting "/data" in TWRP?
1.Flash THAT package via TWRP or go to CF-Auto-Root website, download package for your model and stock firmware on which you are/were and just flash it via Odin3
Click to expand...
Click to collapse
did that but after reboot the phone bootloop ..... restarted itself while its on samsung logo, i must flash the stock rom again , so nothing changed .. what to do ?
I need someone's help me i want so much to root my phone with magisk tool, also keep in mind the phone is second hand and it had a austria firmware . i dont know if that matters, now the current stock rom is a greek COSMOTE.. before that with the austria firmware i could normally flash the phone i tried only with SuperSU tho .. when i say greek or austria firmware i mean the CSC if i am right
StonebridgeGr said:
I need someone's help me i want so much to root my phone with magisk tool, also keep in mind the phone is second hand and it had a austria firmware . i dont know if that matters, now the current stock rom is a greek COSMOTE.. before that with the austria firmware i could normally flash the phone i tried only with SuperSU tho .. when i say greek or austria firmware i mean the CSC if i am right
Click to expand...
Click to collapse
Dont know where is the problem, are you following steps correctly? Install twrp > wipe all data > flash rom > flash super SU / magisk . Also don't flash carrier firmwares, flash the correct carrier free firmware for your region IF your phone is NOT carrier locked.
Sent from my S7 Edge using XDA Labs
shah22 said:
Dont know where is the problem, are you following steps correctly? Install twrp > wipe all data > flash rom > flash super SU / magisk . Also don't flash carrier firmwares, flash the correct carrier free firmware for your region IF your phone is NOT carrier locked.
Sent from my S7 Edge using XDA Labs
Click to expand...
Click to collapse
i dont want custom rom, only the stock
i cant any files throught twrp i tried multiple version of twrp.. if i try to flash something and then reboot my devices says that thing about encryption .. also i get error about mount /data tried to format data but if i format them then the firmware will be wiped , so i have to flash the firmware from begin ..
StonebridgeGr said:
i cant any files throught twrp i tried multiple version of twrp.. if i try to flash something and then reboot my devices says that thing about encryption .. also i get error about mount /data tried to format data but if i format them then the firmware will be wiped , so i have to flash the firmware from begin ..
Click to expand...
Click to collapse
See this https://forum.xda-developers.com/s7-edge/development/rom-s7-edge-rom-v1-1-t3356699
See the beginner section,
Also see this
https://forum.xda-developers.com/galaxy-s7/how-to/root-official-stock-nougat-7-0-100-t3540765
And this too
https://forum.xda-developers.com/s7-edge/development/samsung-systemless-devbase-encryption-t3517178
You should be doing a mistake somewhere. Good luck
Sent from my S7 Edge using XDA Labs
shah22 said:
See this https://forum.xda-developers.com/s7-edge/development/rom-s7-edge-rom-v1-1-t3356699
See the beginner section,
Also see this
https://forum.xda-developers.com/galaxy-s7/how-to/root-official-stock-nougat-7-0-100-t3540765
And this too
https://forum.xda-developers.com/s7-edge/development/samsung-systemless-devbase-encryption-t3517178
You should be doing a mistake somewhere. Good luck
Click to expand...
Click to collapse
Dude if i format the phone from twrp and then reboot the system says there is no OS....
StonebridgeGr said:
Dude if i format the phone from twrp and then reboot the system says there is no OS....
Click to expand...
Click to collapse
Bro, then you should flash the rom through twrp ! Put rom on sd card and flash. Then flash super su. I advise you to watch video tutorials on the links i provided above.
Sent from my S7 Edge using XDA Labs
shah22 said:
Bro, then you should flash the rom through twrp ! Put rom on sd card and flash. Then flash super su. I advise you to watch video tutorials on the links i provided above.
Click to expand...
Click to collapse
Ahahah you talk me like I don't know about android but you don't get it.. I want the stock ROM of Odin.. not a custom.. but I install the superman ROM you send above.. it helped me so far. Thank you so much
StonebridgeGr said:
Ahahah you talk me like I don't know about android but you don't get it.. I want the stock ROM of Odin.. not a custom.. but I install the superman ROM you send above.. it helped me so far. Thank you so much
Click to expand...
Click to collapse
No, i will never think that anyone has lesser knowledge than mine, i am a newbie myself. But why you wipe all internal memory ? If you want stock then only format data and cache/dalvik. Also use system less root or otherwise you will get dm verity fail error. You can also flash no verity opt encrypt to bypass this error if you don't want to use system less root.
Sent from my S7 Edge using XDA Labs
shah22 said:
No, i will never think that anyone has lesser knowledge than mine, i am a newbie myself. But why you wipe all internal memory ? If you want stock then only format data and cache/dalvik. Also use system less root or otherwise you will get dm verity fail error. You can also flash no verity opt encrypt to bypass this error if you don't want to use system less root.
Click to expand...
Click to collapse
I flashed the superman ROM which is like the stock the UI and it has more features.. but the battery is draining faster than the stock.. maybe a cpu governor can help that ?
StonebridgeGr said:
I flashed the superman ROM which is like the stock the UI and it has more features.. but the battery is draining faster than the stock.. maybe a cpu governor can help that ?
Click to expand...
Click to collapse
Ofcourse, there is a whole lot of tweaking when using custom kernels/roms. But be careful, as these tweakings requires much research as it could also damage the hardware if done the wrong way. My advice still is to go back to everything stock and then root it using twrp and super su. Again, don't wipe all internal storage, only data and dalvik cache. Good luck
Sent from my S7 Edge using XDA Labs