BaseBand m8952_70009.08.03.48b - Moto G4 Plus Questions & Answers

I need the baseband file for m8952_70009.08.03.48b.
Someone please check if they have BASEBAND VERSION as m8952_70009.08.03.48b in settings>aboutphone.
if u have it..
then on terminal emulator
dd if=/dev/block/bootdevice/by-name/modem of=/sdcard/NON-HLOS.bin
you will get a file named NON-HLOS.bin in sdcard.. upload it somewhere are ping here.
Your help is much appreciated...

You needed to say what model is expected to have that baseband, just to restrict the circle of "suspects". My US retail has " .45R" in the end.

Related

extract misc img mtd0?

Trying to downgrade the hboot and rom on device and have done this on G2 before. There is a way to extract the misc image using dd but not sure if is the same for nexus one but what the commands for this device are.
when I am trying to flash the passimg file says main version is older so won't work without this. any ideas?
Was trying to follow the downgrade hboot thread and the site for making the misc image is down.
any help would be appreciated.
never mind figured it out.
Code:
su
cat /dev/mtd/mtd0 > /sdcard/misc.img
that pulled it and can edit with any hex editor an put in any version then for downgrade

I9505X live demo unit how to recover, install rom

I decided to make this post to help people bring life back to the I9505X live demo unit. I know how conflicting some some sites are so I just wanted to write something all can follow step for step. Hope it helps like it helped me
1 Download rom from www.sammobile.com
2 Once file is downloaded you will have something looking like this I9505XXUAMDM_I9505OXXAMDB_BTU.zip (this is one i used) http://www.sammobile.com/firmwares/?page=1&model=GT-I9505&pcode=0#firmware
3 Extract the zip file
4 You will now have somthing like this I9505XXUAMDM_I9505OXXAMDB_I9505XXUAMDM_HOME.tar.md5
5 Rename file to samrom.tar
6 Place this file on your desktop (this will be the tar file we want to edit)
7 Download cygwin from here http://cygwin.com/setup.exe and install
8 Move the tar file to C:\cygwin\home
10 Open cygwin
11 We need to delete some files from the tar file. to do so i will list the commands below and files that need deleting. after typing each line command please wait while the action completes as it will look like its doing nothing. commands as follows
$ tar --delete --file=samrom.tar NON-HLOS.bin
$ tar --delete --file=samrom.tar modem.bin
12 Once the last command is done just close cygwin (depending on the rom you download there maybe other files that need deleting)
the files remaining should be
boot.img
cache.img.ext4
hidden.img.ext4
recovery.img
system.img.ext4
(you can check this by opening the samrom.tar file with winrar)
13 Download odin and install from http://www.android.gs/download-odin-3-07/
14 Make sure samsung drivers are installed if they are not download em from http://www.mediafire.com/download/d2h54mx7kt4uupt/SAMSUNG_USB_Driver_for_Mobile_Phones(3).exe
15 Open odin and connect your S4
16 Click on PDA and place the samrom.tar file in there and click start (it will flash)
17 after it has flashed install TWRP and install adams kernel explained here http://forum.xda-developers.com/showthread.php?t=2256252&page=14
i hope this helps people who are having trouble installing roms on there S4 live demo unit. if you would like to know anything or having trouble message me im happy to try help.
Thanks to marian_86 for helping me sort out this problem for me
If this helped you please hit thank me
Hi!
is everything works fine after you did this?
I have live demo unit, I'm afraid bricking it.
there is the possibility of making a video demo?
there is the possibility of making a video demo?
QUOTE=Sirus2012;43240081]I decided to make this post to help people bring life back to the I9505X live demo unit. I know how conflicting some some sites are so I just wanted to write something all can follow step for step. Hope it helps like it helped me
1 Download rom from www.sammobile.com
2 Once file is downloaded you will have something looking like this I9505XXUAMDM_I9505OXXAMDB_BTU.zip (this is one i used) http://www.sammobile.com/firmwares/?page=1&model=GT-I9505&pcode=0#firmware
3 Extract the zip file
4 You will now have somthing like this I9505XXUAMDM_I9505OXXAMDB_I9505XXUAMDM_HOME.tar.md5
5 Rename file to samrom.tar
6 Place this file on your desktop (this will be the tar file we want to edit)
7 Download cygwin from here http://cygwin.com/setup.exe and install
8 Move the tar file to C:\cygwin\home
10 Open cygwin
11 We need to delete some files from the tar file. to do so i will list the commands below and files that need deleting. after typing each line command please wait while the action completes as it will look like its doing nothing. commands as follows
$ tar --delete --file=samrom.tar NON-HLOS.bin
$ tar --delete --file=samrom.tar modem.bin
12 Once the last command is done just close cygwin (depending on the rom you download there maybe other files that need deleting)
the files remaining should be
boot.img
cache.img.ext4
hidden.img.ext4
recovery.img
system.img.ext4
(you can check this by opening the samrom.tar file with winrar)
13 Download odin and install from http://www.android.gs/download-odin-3-07/
14 Make sure samsung drivers are installed if they are not download em from http://www.mediafire.com/download/d2h54mx7kt4uupt/SAMSUNG_USB_Driver_for_Mobile_Phones(3).exe
15 Open odin and connect your S4
16 Click on PDA and place the samrom.tar file in there and click start (it will flash)
17 after it has flashed install TWRP and install adams kernel explained here http://forum.xda-developers.com/showthread.php?t=2256252&page=14
i hope this helps people who are having trouble installing roms on there S4 live demo unit. if you would like to know anything or having trouble message me im happy to try help.
Thanks to marian_86 for helping me sort out this problem for me
If this helped you please hit thank me [/QUOTE]
Pics pleas??
Verstuurd van mijn GT-I9505
Every thing is working fine for me only one prob.
when i reboot it . it stuck into the first logo. i have waited for more than 10 min.
than if i got recvoery and format the data. it boot than normally once.
Again if i had to reboot it. i have to goto recovery and format the data to boot the phone.
how to get rid of this?
br
s4 demo unit
Deduxma said:
there is the possibility of making a video demo?
QUOTE=Sirus2012;43240081]I decided to make this post to help people bring life back to the I9505X live demo unit. I know how conflicting some some sites are so I just wanted to write something all can follow step for step. Hope it helps like it helped me
1 Download rom from www.sammobile.com
2 Once file is downloaded you will have something looking like this I9505XXUAMDM_I9505OXXAMDB_BTU.zip (this is one i used) http://www.sammobile.com/firmwares/?page=1&model=GT-I9505&pcode=0#firmware
3 Extract the zip file
4 You will now have somthing like this I9505XXUAMDM_I9505OXXAMDB_I9505XXUAMDM_HOME.tar.md5
5 Rename file to samrom.tar
6 Place this file on your desktop (this will be the tar file we want to edit)
7 Download cygwin from here http://cygwin.com/setup.exe and install
8 Move the tar file to C:\cygwin\home
10 Open cygwin
11 We need to delete some files from the tar file. to do so i will list the commands below and files that need deleting. after typing each line command please wait while the action completes as it will look like its doing nothing. commands as follows
$ tar --delete --file=samrom.tar NON-HLOS.bin
$ tar --delete --file=samrom.tar modem.bin
12 Once the last command is done just close cygwin (depending on the rom you download there maybe other files that need deleting)
the files remaining should be
boot.img
cache.img.ext4
hidden.img.ext4
recovery.img
system.img.ext4
(you can check this by opening the samrom.tar file with winrar)
13 Download odin and install from http://www.android.gs/download-odin-3-07/
14 Make sure samsung drivers are installed if they are not download em from http://www.mediafire.com/download/d2h54mx7kt4uupt/SAMSUNG_USB_Driver_for_Mobile_Phones(3).exe
15 Open odin and connect your S4
16 Click on PDA and place the samrom.tar file in there and click start (it will flash)
17 after it has flashed install TWRP and install adams kernel explained here http://forum.xda-developers.com/showthread.php?t=2256252&page=14
i hope this helps people who are having trouble installing roms on there S4 live demo unit. if you would like to know anything or having trouble message me im happy to try help.
Thanks to marian_86 for helping me sort out this problem for me
If this helped you please hit thank me
Click to expand...
Click to collapse
[/QUOTE]
please dose it mean my live s4 live demo unit will now behave like a normal phone and make or receive calls? after intalling this rom?
Help!
Just picked up a i9505x live demo unit.....does this process still work??
Demos don't have imeis do they I know our 3 s4s don't so calls can't be made
Sent from my GT-I9505 using xda app-developers app
s4sajii said:
Every thing is working fine for me only one prob.
when i reboot it . it stuck into the first logo. i have waited for more than 10 min.
than if i got recvoery and format the data. it boot than normally once.
Again if i had to reboot it. i have to goto recovery and format the data to boot the phone.
how to get rid of this?
br
Click to expand...
Click to collapse
Flash edited stock rom
Yes
Already did that. As described in the first post.
Br
Works but...
Everything works as it should but no WiFi.When flash Adam Kernel just get a black screen and that's it
I follow all the steps from the first post but at the end of odin flash i get FAIL . Any ideas?
Sirus2012 said:
11 We need to delete some files from the tar file. to do so i will list the commands below and files that need deleting. after typing each line command please wait while the action completes as it will look like its doing nothing. commands as follows
$ tar --delete --file=samrom.tar NON-HLOS.bin
$ tar --delete --file=samrom.tar modem.bin
Click to expand...
Click to collapse
i did it but i got this
Dj [email protected]ib ~
$ tar --delete --file=samrom.tar NON-HLOS.bin
tar: NON-HLOS.bin: Not found in archive
tar: Exiting with failure status due to previous errors
Dj [email protected] ~
$ tar --delete --file=samrom.tar modem.bin
tar: modem.bin: Not found in archive
tar: Exiting with failure status due to previous errors
Dj [email protected] ~
so sir what to do ???
mastro:° said:
i did it but i got this
Dj [email protected] ~
$ tar --delete --file=samrom.tar NON-HLOS.bin
tar: NON-HLOS.bin: Not found in archive
tar: Exiting with failure status due to previous errors
Dj [email protected] ~
$ tar --delete --file=samrom.tar modem.bin
tar: modem.bin: Not found in archive
tar: Exiting with failure status due to previous errors
Dj [email protected] ~
so sir what to do ???
Click to expand...
Click to collapse
same problem here.....seems like the command is not written in the right way
EDIT: I noticedd that when you start the program, it creates a folder inside 'cygwin-home' which is your user name and you have to place the samrom.tar in there in order to delete the two files!
btw the command lines are correct! cheers!!
stergios89 said:
same problem here.....seems like the command is not written in the right way
EDIT: I noticedd that when you start the program, it creates a folder inside 'cygwin-home' which is your user name and you have to place the samrom.tar in there in order to delete the two files!
btw the command lines are correct! cheers!!
Click to expand...
Click to collapse
So what`s the status of your phone, I was given an S4 LDU and I`d love to get rid of the demo all together, I`m not to bothered that I won`t be able to use it as a phone.
mloc33 said:
So what`s the status of your phone, I was given an S4 LDU and I`d love to get rid of the demo all together, I`m not to bothered that I won`t be able to use it as a phone.
Click to expand...
Click to collapse
Well, based on the stock ROM I downloaded it (I9505XXUAMDM_I9505OXXAMDB_I9505XXUAMDM_HOME.tar.md5),I deleted the the files sirus2012 was referring to and I am stuck at a point were the Odin says fail while flashing the ROM....
Trying to figure out if I need to delete another more file from the .TAR
After the FAIL status in Odin, I disconnected the phone, removed battery and placed it again and I had an error saying 'Firmware needs to be recovered via Kies'
I, once then, flashed again the stock ROM(without the deleted files) and noticed there was no WiFi....
So I either have a phone with no WIFI, or an error and phone can't boot
Hope I can find a way out of this!
stergios89 said:
Well, based on the stock ROM I downloaded it (I9505XXUAMDM_I9505OXXAMDB_I9505XXUAMDM_HOME.tar.md5),I deleted the the files sirus2012 was referring to and I am stuck at a point were the Odin says fail while flashing the ROM....
Trying to figure out if I need to delete another more file from the .TAR
After the FAIL status in Odin, I disconnected the phone, removed battery and placed it again and I had an error saying 'Firmware needs to be recovered via Kies'
I, once then, flashed again the stock ROM(without the deleted files) and noticed there was no WiFi....
So I either have a phone with no WIFI, or an error and phone can't boot
Hope I can find a way out of this!
Click to expand...
Click to collapse
Seems that there`s no real method or solution, pity, it`s a waste of a phone the way it is..
mloc33 said:
Seems that there`s no real method or solution, pity, it`s a waste of a phone the way it is..
Click to expand...
Click to collapse
Don't give up on that.....I think there will be a solution sooner or later....(I'll try to find it asap) because this 'phone' is really good
Or it could be something really small that we can't see and do it wrong.
stergios89 said:
Don't give up on that.....I think there will be a solution sooner or later....(I'll try to find it asap) because this 'phone' is really good
Or it could be something really small that we can't see and do it wrong.
Click to expand...
Click to collapse
True man, fingers crossed I suppose
mloc33 said:
Seems that there`s no real method or solution, pity, it`s a waste of a phone the way it is..
Click to expand...
Click to collapse
Sirus2012 said:
I decided to make this post to help people bring life back to the I9505X live demo unit. I know how conflicting some some sites are so I just wanted to write something all can follow step for step. Hope it helps like it helped me
1 Download rom from www.sammobile.com
2 Once file is downloaded you will have something looking like this I9505XXUAMDM_I9505OXXAMDB_BTU.zip (this is one i used) http://www.sammobile.com/firmwares/?page=1&model=GT-I9505&pcode=0#firmware
3 Extract the zip file
4 You will now have somthing like this I9505XXUAMDM_I9505OXXAMDB_I9505XXUAMDM_HOME.tar.md5
5 Rename file to samrom.tar
6 Place this file on your desktop (this will be the tar file we want to edit)
7 Download cygwin from here http://cygwin.com/setup.exe and install
8 Move the tar file to C:\cygwin\home
10 Open cygwin
11 We need to delete some files from the tar file. to do so i will list the commands below and files that need deleting. after typing each line command please wait while the action completes as it will look like its doing nothing. commands as follows
$ tar --delete --file=samrom.tar NON-HLOS.bin
$ tar --delete --file=samrom.tar modem.bin
12 Once the last command is done just close cygwin (depending on the rom you download there maybe other files that need deleting)
the files remaining should be
boot.img
cache.img.ext4
hidden.img.ext4
recovery.img
system.img.ext4
(you can check this by opening the samrom.tar file with winrar)
13 Download odin and install from http://www.android.gs/download-odin-3-07/
14 Make sure samsung drivers are installed if they are not download em from http://www.mediafire.com/download/d2h54mx7kt4uupt/SAMSUNG_USB_Driver_for_Mobile_Phones(3).exe
15 Open odin and connect your S4
16 Click on PDA and place the samrom.tar file in there and click start (it will flash)
17 after it has flashed install TWRP and install adams kernel explained here http://forum.xda-developers.com/showthread.php?t=2256252&page=14
i hope this helps people who are having trouble installing roms on there S4 live demo unit. if you would like to know anything or having trouble message me im happy to try help.
Thanks to marian_86 for helping me sort out this problem for me
If this helped you please hit thank me
Click to expand...
Click to collapse
Well I think I figured it out with my S4 demo unit to make WiFi work.
All the steps were followed BUT...
I DIDN'T delete the two files(modem and NON-hlos) and continued with the procedure
The most important step was .17 which redirects you to another thread about TWRP and Adams Kernel...
Following the steps there where enough to solve my issue.
And now my WiFi works pretty good(so far so good at least for the last 2-3 hours )
Let me know if it worked for you too!
Cheers!

[REQEST] Dump file

Hey
So the problem is that i need file (dump file) from Z3X box support files .. and this dump available only in this box files server and ofcours i need the box card to download .. this box isn't available at all in my country Syria and the device that i need this dump for isn't popular either so i can make dump by myself from other working phone .. so anyone can provide me the file or dump?? .. or any suggestions to solve
File : HTC_ONE XL_PJ8350000_dump_rom1_512mb.rar (Evita-utl)
Download link:
z3xfileS4gRWFzeSBKdGFnIGZpbGVzL0hUQy9PTkVfWExfUEo4MzUwMDAwL0R1bXAvSFRDX09ORSBYTF9QSjgzNTAwMDBfZHVtcF9yb20xXzUxMm1iLnJhcnw1NTI5NXwxMTU4NzA3Nzk=
Sorry if it was wrong section .. Regardz
Hi
if you have working phone,You can read dump from her and write to bricked device with this command(root required):::
dd if=/dev/block/mmcblk0 of=/sdcard/unbrick.bin bs=1024 count=?
*** "?" mean any size you want..usually 256mb is enough ...so "Count is 262144"
--
But if you don't have working device,Please contact me via ICQ .... I have my own dump ...but for some reason i can't upload in any where,just can upload directly into your pc
BABAK236 said:
Hi
if you have working phone,You can read dump from her and write to bricked device with this command(root required):::
dd if=/dev/block/mmcblk0 of=/sdcard/unbrick.bin bs=1024 count=?
*** "?" mean any size you want..usually 256mb is enough ...so "Count is 262144"
--
But if you don't have working device,Please contact me via ICQ .... I have my own dump ...but for some reason i can't upload in any where,just can upload directly into your pc
Click to expand...
Click to collapse
Thanks for reply .. i don't have working phone .. and this model isn't sold in my country .. so the dump you have ,is it for my model (evita-UTL) NOT (UL) and model id: mid:JP835000 ????????
Please give me your ICQ so we can contact
Hi ..
I've managed a 512 dump file (bin) for my model from a friend get it from his box files .. so is there any way to open it?? or select blocks from it or restore it via adb ?? can it be used in any way by adb ??

Anyone Please compile LP for T530NU

as the title states please someone i perfer a smart dev here on xda to compile or get the lollipop offical update to work on the TAB4 10.1 SM-T530NU JUST A REQUEST NOT A DEMAND.
LGMONO said:
as the title states please someone i perfer a smart dev here on xda to compile or get the lollipop offical update to work on the TAB4 10.1 SM-T530NU JUST A REQUEST NOT A DEMAND.
Click to expand...
Click to collapse
There are three different cyanogenmod 12 (lollipop) ROMs listed in the development section compatible with the t530nu which are all better than stock anyway. I have the exact same model as you and have been on lollipop for months now and loving it
i understand that, i love and encourage CM and AOSP roms i have used them quite offen however i prefer stock because stock roms utilize the devices features and because there are so many devices the devs dont have time to port stock based apps in there modifications so there for i use stock roms for a daily driver. but i would always support custom roms to anyone as did you. thanks for the reply, would really like to get a stock based lp on the device.
Thanks
LGMONO said:
i understand that, i love and encourage CM and AOSP roms i have used them quite offen however i prefer stock because stock roms utilize the devices features and because there are so many devices the devs dont have time to port stock based apps in there modifications so there for i use stock roms for a daily driver. but i would always support custom roms to anyone as did you. thanks for the reply, would really like to get a stock based lp on the device.
Thanks
Click to expand...
Click to collapse
^^what he said.
I've been checking the forums throughout the day since the LP update came out hoping that someone ported it to the T530NU. Who knows when the official one will come out since the LP update for the T530 has only been released in Spain so far. I doubt it will be released for the T530NU until the update for the T530 is released in more regions.
Dudash said:
^^what he said.
I've been checking the forums throughout the day since the LP update came out hoping that someone ported it to the T530NU. Who knows when the official one will come out since the LP update for the T530 has only been released in Spain so far. I doubt it will be released for the T530NU until the update for the T530 is released in more regions.
Click to expand...
Click to collapse
and @LGMONO
I imagine it's possible to port the official update, here are my thoughts. Take the LP Odin file (the tar file) and open the tar.md5 file in winrar or 7zip. Extract all the files inside (system.img, boot.img, the modem.bin and everything) and make it into an update zip, (with updater-script and everything) but tailor it to be flashable with FlashFire. No idea if it'll work but that's what I'd try if I preferred touchwiz over cyanogenmod.
Edit: On the files you want to pull, I don't think you want to use cache.img or hidden.img, but yeah everything else.
thisisapoorusernamechoice said:
and @LGMONO
I imagine it's possible to port the official update, here are my thoughts. Take the LP Odin file (the tar file) and open the tar.md5 file in winrar or 7zip. Extract all the files inside (system.img, boot.img, the modem.bin and everything) and make it into an update zip, (with updater-script and everything) but tailor it to be flashable with FlashFire. No idea if it'll work but that's what I'd try if I preferred touchwiz over cyanogenmod.
Edit: On the files you want to pull, I don't think you want to use cache.img or hidden.img, but yeah everything else.
Click to expand...
Click to collapse
T, hey hey, you only want the system.img and the boot.img, the issue though is the kernel, my attempts at getting the firmware running "as-is"
fail, [kernel] while i can access through adb i couldn't get a read on logcat even when invoking with full/absolute path
/system/bin/logcat
the sepolicy is covering adb and as i'm learning , sometimes permission denied actually means no such file or directory
and/or the opposite :silly: gotta love android.
m
moonbutt74 said:
T, hey hey, you only want the system.img and the boot.img, the issue though is the kernel, my attempts at getting the firmware running "as-is"
fail, [kernel] while i can access through adb i couldn't get a read on logcat even when invoking with full/absolute path
/system/bin/logcat
the sepolicy is covering adb and as i'm learning , sometimes permission denied actually means no such file or directory
and/or the opposite :silly: gotta love android.
m
Click to expand...
Click to collapse
I know they got a custom kit Kat kernel going for cm11 NU, did anything come of getting that working for cm12 and would that be of use in this instance? (Yeah I haven't checked the thread in a little while because I'm lazy and inattentive)
thisisapoorusernamechoice said:
I know they got a custom kit Kat kernel going for cm11 NU, did anything come of getting that working for cm12 and would that be of use in this instance? (Yeah I haven't checked the thread in a little while because I'm lazy and inattentive)
Click to expand...
Click to collapse
T
hey, you forgot irrepressibly polysyllabic ! xD
okay seriously though, i'm momentarily stumped as to what's going on with my t330nu but later later tonight i'll run a kernel compile and try the t530 rom again.
m
thisisapoorusernamechoice said:
and @LGMONO
I imagine it's possible to port the official update, here are my thoughts. Take the LP Odin file (the tar file) and open the tar.md5 file in winrar or 7zip. Extract all the files inside (system.img, boot.img, the modem.bin and everything) and make it into an update zip, (with updater-script and everything) but tailor it to be flashable with FlashFire. No idea if it'll work but that's what I'd try if I preferred touchwiz over cyanogenmod.
Edit: On the files you want to pull, I don't think you want to use cache.img or hidden.img, but yeah everything else.
Click to expand...
Click to collapse
i tried that lol it didnt work im a .net dev not an android dev i assure you the android devs are much smarter however i did try that method already i purchased ODIN mobile and the device is not supported, when i did try with odin pc version the erro is the aboot and fails im very sure the system will work on t530nu
LGMONO said:
i tried that lol it didnt work im a .net dev not an android dev i assure you the android devs are much smarter however i did try that method already i purchased ODIN mobile and the device is not supported, when i did try with odin pc version the erro is the aboot and fails im very sure the system will work on t530nu
Click to expand...
Click to collapse
Nah you don't want to try this with Odin it verifies what device you have. I say try flashfire instead (chainfire even said FF is intended to replace mobile Odin as well as safestrap) but we have to figure something out for the kernel (boot.img).
@moonbutt74 I was able to flash t530/1 ROMs before anyone started developing NU specific custom kernels, is it not working here because it's an official build or something? Sorry for my frustratingly persistent dearth of knowledge.
moonbutt74 said:
T
hey, you forgot irrepressibly polysyllabic ! xD
okay seriously though, i'm momentarily stumped as to what's going on with my t330nu but later later tonight i'll run a kernel compile and try the t530 rom again.
m
Click to expand...
Click to collapse
Finally another individual understands my irresistible urge to layer on excess syllables with each successive increment of agitation I am provoked to. Also my father is a lawyer (lmao). I'll try some things for this tonight, I don't really expect success (or really anything other than a soft brick) but my curiosity is officially piqued, I'll make this my project for tonight
LGMONO said:
i tried that lol it didnt work im a .net dev not an android dev i assure you the android devs are much smarter however i did try that method already i purchased ODIN mobile and the device is not supported, when i did try with odin pc version the erro is the aboot and fails im very sure the system will work on t530nu
Click to expand...
Click to collapse
L,
hi, this step carries risk, make a backup !!
what you need, from the full firmware img extract system.img and boot.img
pack system.img for odin flash, this is the tricky part, it's one of the following
A- rename system.img.ext4 to system.img
--- then in linux/cygwin cd to the directory where system.img is located
--- run tar as follows
--- tar -H ustar -c system.img > system.img.tar
--- md5sum -t system.img.tar >> system.img.tar
--- mv system.img.tar system.img.tar.md5
or
B- don't rename system.img.ext4 and run again in linux/cygwin
--- tar -H ustar -c system.img.ext4 > system.img.ext4.tar
--- md5sum -t system.img.ext4.tar >> system.img.ext4.tar
--- mv system.img.ext4.tar system.img.ext4.tar.md5
then attempt attempt odin flash, NOT MOBILE ODIN
do the same for boot.img
m
thisisapoorusernamechoice said:
Nah you don't want to try this with Odin it verifies what device you have. I say try flashfire instead (chainfire even said FF is intended to replace mobile Odin as well as safestrap) but we have to figure something out for the kernel (boot.img).
@moonbutt74 I was able to flash t530/1 ROMs before anyone started developing NU specific custom kernels, is it not working here because it's an official build or something? Sorry for my frustratingly persistent dearth of knowledge.
Finally another individual understands my irresistible urge to layer on excess syllables with each successive increment of agitation I am provoked to. Also my father is a lawyer (lmao). I'll try some things for this tonight, I don't really expect success (or really anything other than a soft brick) but my curiosity is officially piqued, I'll make this my project for tonight
Click to expand...
Click to collapse
can you give me a download link to flashfire please i tried searching for this i cant find it ? please thanks
moonbutt74 said:
L,
hi, this step carries risk, make a backup !!
what you need, from the full firmware img extract system.img and boot.img
pack system.img for odin flash, this is the tricky part, it's one of the following
A- rename system.img.ext4 to system.img
--- then in linux/cygwin cd to the directory where system.img is located
--- run tar as follows
--- tar -H ustar -c system.img > system.img.tar
--- md5sum -t system.img.tar >> system.img.tar
--- mv system.img.tar system.img.tar.md5
or
B- don't rename system.img.ext4 and run again in linux/cygwin
--- tar -H ustar -c system.img.ext4 > system.img.ext4.tar
--- md5sum -t system.img.ext4.tar >> system.img.ext4.tar
--- mv system.img.ext4.tar system.img.ext4.tar.md5
then attempt attempt odin flash, NOT MOBILE ODIN
do the same for boot.img
m
Click to expand...
Click to collapse
Thank you i will try this and thanks to all that is participating in this thread.. i have a lg g3 i just updated to lollipop and i like it, but remember for you guys out there newbees so to say at least try and give support for AOSP and Cyan roms i am a huge fan. Give them devs the credit they work hard for
LGMONO said:
can you give me a download link to flashfire please i tried searching for this i cant find it ? please thanks
Click to expand...
Click to collapse
Chainfire said:
- Join the G+ community using the same Google account as you're using for Play on your phone/tablet here: https://plus.google.com/communities/116661625291346007584
- Sign up to receive the BETA versions from Play here: https://play.google.com/apps/testing/eu.chainfire.flash
- Use the link provided after sign-up to download the app. Note that it may take minutes to even hours before the provided link actually works.
Click to expand...
Click to collapse
Link to Chainfire's FlashFire thread: http://forum.xda-developers.com/showpost.php?p=59959596&postcount=1
LGMONO said:
can you give me a download link to flashfire please i tried searching for this i cant find it ? please thanks
Click to expand...
Click to collapse
Here
But try what moonbutt74 is saying first, he's smarter than I. I'm just thinking aloud about all the (probably almost certainly stupid) stuff I'm going to try to get this working
T,
i have a though about incorrect firmware linking in boot.img and /system/etc scripts in the release
to mount and explore the system.img goto directory where extracted image is located and run
simg2img system.img.ext4 system.img
when thats done
mkdir system
mount -o rw -t ext4 system.img system
for the boot img goto @osm0sis 's AIK thread and get the linux package
use that toolkit to unpack the boot.img and check it out, you'll generate two directories after img unpacking,
ramdisk and split-image in split-image directory you will find the kernel and dtb imgs
m
yeah the link on google play is dead lol
nevermind i got it thanks
moonbutt74 said:
T,
i have a though about incorrect firmware linking in boot.img and /system/etc scripts in the release
to mount and explore the system.img goto directory where extracted image is located and run
simg2img system.img.ext4 system.img
when thats done
mkdir system
mount -o rw -t ext4 system.img system
for the boot img goto @osm0sis 's AIK thread and get the linux package
use that toolkit to unpack the boot.img and check it out, you'll generate two directories after img unpacking,
ramdisk and split-image in split-image directory you will find the kernel and dtb imgs
m
Click to expand...
Click to collapse
^^This guy is very smart ^^ i will try that as well i really wanna get these guys the lp for t530nu here in America we are being neglected with the official lollipop update samsung is slacking here i say less talk and more work for them people lol. we would probably all have our lollipop by now. jk
moonbutt74 said:
T,
i have a though about incorrect firmware linking in boot.img and /system/etc scripts in the release
to mount and explore the system.img goto directory where extracted image is located and run
simg2img system.img.ext4 system.img
when thats done
mkdir system
mount -o rw -t ext4 system.img system
for the boot img goto @osm0sis 's AIK thread and get the linux package
use that toolkit to unpack the boot.img and check it out, you'll generate two directories after img unpacking,
ramdisk and split-image in split-image directory you will find the kernel and dtb imgs
m
Click to expand...
Click to collapse
Thanks M I'll get started once I get back from my daily run (I refuse to be a fat American stereotype :silly: )

can i have a N910G pit file?

can i have a N910G pit file?
n910g for australia optus, if you have one,please send me link, thanks
kyle1031 said:
can i have a N910G pit file?
n910g for australia optus, if you have one,please send me link, thanks
Click to expand...
Click to collapse
Unfortunately I couldn't find the pit file, but still there's a way. If someone has a same device as of urs and also rooted, then u can tell him to install android terminal and busybox. Then tell him to type this in terminal:
su
dd if=/dev/block/mmcblk0 of=/sdcard/out.pit bs=8 count=580 skip=2176
This will extract the pit file from the ROM and will be placed in the internal.
U can post this thing in ur device forum, so someone could help u to give the pit file.???
tra_dax

Categories

Resources