I9505X live demo unit how to recover, install rom - Galaxy S 4 Q&A, Help & Troubleshooting

I decided to make this post to help people bring life back to the I9505X live demo unit. I know how conflicting some some sites are so I just wanted to write something all can follow step for step. Hope it helps like it helped me
1 Download rom from www.sammobile.com
2 Once file is downloaded you will have something looking like this I9505XXUAMDM_I9505OXXAMDB_BTU.zip (this is one i used) http://www.sammobile.com/firmwares/?page=1&model=GT-I9505&pcode=0#firmware
3 Extract the zip file
4 You will now have somthing like this I9505XXUAMDM_I9505OXXAMDB_I9505XXUAMDM_HOME.tar.md5
5 Rename file to samrom.tar
6 Place this file on your desktop (this will be the tar file we want to edit)
7 Download cygwin from here http://cygwin.com/setup.exe and install
8 Move the tar file to C:\cygwin\home
10 Open cygwin
11 We need to delete some files from the tar file. to do so i will list the commands below and files that need deleting. after typing each line command please wait while the action completes as it will look like its doing nothing. commands as follows
$ tar --delete --file=samrom.tar NON-HLOS.bin
$ tar --delete --file=samrom.tar modem.bin
12 Once the last command is done just close cygwin (depending on the rom you download there maybe other files that need deleting)
the files remaining should be
boot.img
cache.img.ext4
hidden.img.ext4
recovery.img
system.img.ext4
(you can check this by opening the samrom.tar file with winrar)
13 Download odin and install from http://www.android.gs/download-odin-3-07/
14 Make sure samsung drivers are installed if they are not download em from http://www.mediafire.com/download/d2h54mx7kt4uupt/SAMSUNG_USB_Driver_for_Mobile_Phones(3).exe
15 Open odin and connect your S4
16 Click on PDA and place the samrom.tar file in there and click start (it will flash)
17 after it has flashed install TWRP and install adams kernel explained here http://forum.xda-developers.com/showthread.php?t=2256252&page=14
i hope this helps people who are having trouble installing roms on there S4 live demo unit. if you would like to know anything or having trouble message me im happy to try help.
Thanks to marian_86 for helping me sort out this problem for me
If this helped you please hit thank me

Hi!
is everything works fine after you did this?
I have live demo unit, I'm afraid bricking it.

there is the possibility of making a video demo?
there is the possibility of making a video demo?
QUOTE=Sirus2012;43240081]I decided to make this post to help people bring life back to the I9505X live demo unit. I know how conflicting some some sites are so I just wanted to write something all can follow step for step. Hope it helps like it helped me
1 Download rom from www.sammobile.com
2 Once file is downloaded you will have something looking like this I9505XXUAMDM_I9505OXXAMDB_BTU.zip (this is one i used) http://www.sammobile.com/firmwares/?page=1&model=GT-I9505&pcode=0#firmware
3 Extract the zip file
4 You will now have somthing like this I9505XXUAMDM_I9505OXXAMDB_I9505XXUAMDM_HOME.tar.md5
5 Rename file to samrom.tar
6 Place this file on your desktop (this will be the tar file we want to edit)
7 Download cygwin from here http://cygwin.com/setup.exe and install
8 Move the tar file to C:\cygwin\home
10 Open cygwin
11 We need to delete some files from the tar file. to do so i will list the commands below and files that need deleting. after typing each line command please wait while the action completes as it will look like its doing nothing. commands as follows
$ tar --delete --file=samrom.tar NON-HLOS.bin
$ tar --delete --file=samrom.tar modem.bin
12 Once the last command is done just close cygwin (depending on the rom you download there maybe other files that need deleting)
the files remaining should be
boot.img
cache.img.ext4
hidden.img.ext4
recovery.img
system.img.ext4
(you can check this by opening the samrom.tar file with winrar)
13 Download odin and install from http://www.android.gs/download-odin-3-07/
14 Make sure samsung drivers are installed if they are not download em from http://www.mediafire.com/download/d2h54mx7kt4uupt/SAMSUNG_USB_Driver_for_Mobile_Phones(3).exe
15 Open odin and connect your S4
16 Click on PDA and place the samrom.tar file in there and click start (it will flash)
17 after it has flashed install TWRP and install adams kernel explained here http://forum.xda-developers.com/showthread.php?t=2256252&page=14
i hope this helps people who are having trouble installing roms on there S4 live demo unit. if you would like to know anything or having trouble message me im happy to try help.
Thanks to marian_86 for helping me sort out this problem for me
If this helped you please hit thank me [/QUOTE]

Pics pleas??
Verstuurd van mijn GT-I9505

Every thing is working fine for me only one prob.
when i reboot it . it stuck into the first logo. i have waited for more than 10 min.
than if i got recvoery and format the data. it boot than normally once.
Again if i had to reboot it. i have to goto recovery and format the data to boot the phone.
how to get rid of this?
br

s4 demo unit
Deduxma said:
there is the possibility of making a video demo?
QUOTE=Sirus2012;43240081]I decided to make this post to help people bring life back to the I9505X live demo unit. I know how conflicting some some sites are so I just wanted to write something all can follow step for step. Hope it helps like it helped me
1 Download rom from www.sammobile.com
2 Once file is downloaded you will have something looking like this I9505XXUAMDM_I9505OXXAMDB_BTU.zip (this is one i used) http://www.sammobile.com/firmwares/?page=1&model=GT-I9505&pcode=0#firmware
3 Extract the zip file
4 You will now have somthing like this I9505XXUAMDM_I9505OXXAMDB_I9505XXUAMDM_HOME.tar.md5
5 Rename file to samrom.tar
6 Place this file on your desktop (this will be the tar file we want to edit)
7 Download cygwin from here http://cygwin.com/setup.exe and install
8 Move the tar file to C:\cygwin\home
10 Open cygwin
11 We need to delete some files from the tar file. to do so i will list the commands below and files that need deleting. after typing each line command please wait while the action completes as it will look like its doing nothing. commands as follows
$ tar --delete --file=samrom.tar NON-HLOS.bin
$ tar --delete --file=samrom.tar modem.bin
12 Once the last command is done just close cygwin (depending on the rom you download there maybe other files that need deleting)
the files remaining should be
boot.img
cache.img.ext4
hidden.img.ext4
recovery.img
system.img.ext4
(you can check this by opening the samrom.tar file with winrar)
13 Download odin and install from http://www.android.gs/download-odin-3-07/
14 Make sure samsung drivers are installed if they are not download em from http://www.mediafire.com/download/d2h54mx7kt4uupt/SAMSUNG_USB_Driver_for_Mobile_Phones(3).exe
15 Open odin and connect your S4
16 Click on PDA and place the samrom.tar file in there and click start (it will flash)
17 after it has flashed install TWRP and install adams kernel explained here http://forum.xda-developers.com/showthread.php?t=2256252&page=14
i hope this helps people who are having trouble installing roms on there S4 live demo unit. if you would like to know anything or having trouble message me im happy to try help.
Thanks to marian_86 for helping me sort out this problem for me
If this helped you please hit thank me
Click to expand...
Click to collapse
[/QUOTE]
please dose it mean my live s4 live demo unit will now behave like a normal phone and make or receive calls? after intalling this rom?

Help!
Just picked up a i9505x live demo unit.....does this process still work??

Demos don't have imeis do they I know our 3 s4s don't so calls can't be made
Sent from my GT-I9505 using xda app-developers app

s4sajii said:
Every thing is working fine for me only one prob.
when i reboot it . it stuck into the first logo. i have waited for more than 10 min.
than if i got recvoery and format the data. it boot than normally once.
Again if i had to reboot it. i have to goto recovery and format the data to boot the phone.
how to get rid of this?
br
Click to expand...
Click to collapse
Flash edited stock rom

Yes
Already did that. As described in the first post.
Br

Works but...
Everything works as it should but no WiFi.When flash Adam Kernel just get a black screen and that's it

I follow all the steps from the first post but at the end of odin flash i get FAIL . Any ideas?

Sirus2012 said:
11 We need to delete some files from the tar file. to do so i will list the commands below and files that need deleting. after typing each line command please wait while the action completes as it will look like its doing nothing. commands as follows
$ tar --delete --file=samrom.tar NON-HLOS.bin
$ tar --delete --file=samrom.tar modem.bin
Click to expand...
Click to collapse
i did it but i got this
Dj [email protected]ib ~
$ tar --delete --file=samrom.tar NON-HLOS.bin
tar: NON-HLOS.bin: Not found in archive
tar: Exiting with failure status due to previous errors
Dj [email protected] ~
$ tar --delete --file=samrom.tar modem.bin
tar: modem.bin: Not found in archive
tar: Exiting with failure status due to previous errors
Dj [email protected] ~
so sir what to do ???

mastro:° said:
i did it but i got this
Dj [email protected] ~
$ tar --delete --file=samrom.tar NON-HLOS.bin
tar: NON-HLOS.bin: Not found in archive
tar: Exiting with failure status due to previous errors
Dj [email protected] ~
$ tar --delete --file=samrom.tar modem.bin
tar: modem.bin: Not found in archive
tar: Exiting with failure status due to previous errors
Dj [email protected] ~
so sir what to do ???
Click to expand...
Click to collapse
same problem here.....seems like the command is not written in the right way
EDIT: I noticedd that when you start the program, it creates a folder inside 'cygwin-home' which is your user name and you have to place the samrom.tar in there in order to delete the two files!
btw the command lines are correct! cheers!!

stergios89 said:
same problem here.....seems like the command is not written in the right way
EDIT: I noticedd that when you start the program, it creates a folder inside 'cygwin-home' which is your user name and you have to place the samrom.tar in there in order to delete the two files!
btw the command lines are correct! cheers!!
Click to expand...
Click to collapse
So what`s the status of your phone, I was given an S4 LDU and I`d love to get rid of the demo all together, I`m not to bothered that I won`t be able to use it as a phone.

mloc33 said:
So what`s the status of your phone, I was given an S4 LDU and I`d love to get rid of the demo all together, I`m not to bothered that I won`t be able to use it as a phone.
Click to expand...
Click to collapse
Well, based on the stock ROM I downloaded it (I9505XXUAMDM_I9505OXXAMDB_I9505XXUAMDM_HOME.tar.md5),I deleted the the files sirus2012 was referring to and I am stuck at a point were the Odin says fail while flashing the ROM....
Trying to figure out if I need to delete another more file from the .TAR
After the FAIL status in Odin, I disconnected the phone, removed battery and placed it again and I had an error saying 'Firmware needs to be recovered via Kies'
I, once then, flashed again the stock ROM(without the deleted files) and noticed there was no WiFi....
So I either have a phone with no WIFI, or an error and phone can't boot
Hope I can find a way out of this!

stergios89 said:
Well, based on the stock ROM I downloaded it (I9505XXUAMDM_I9505OXXAMDB_I9505XXUAMDM_HOME.tar.md5),I deleted the the files sirus2012 was referring to and I am stuck at a point were the Odin says fail while flashing the ROM....
Trying to figure out if I need to delete another more file from the .TAR
After the FAIL status in Odin, I disconnected the phone, removed battery and placed it again and I had an error saying 'Firmware needs to be recovered via Kies'
I, once then, flashed again the stock ROM(without the deleted files) and noticed there was no WiFi....
So I either have a phone with no WIFI, or an error and phone can't boot
Hope I can find a way out of this!
Click to expand...
Click to collapse
Seems that there`s no real method or solution, pity, it`s a waste of a phone the way it is..

mloc33 said:
Seems that there`s no real method or solution, pity, it`s a waste of a phone the way it is..
Click to expand...
Click to collapse
Don't give up on that.....I think there will be a solution sooner or later....(I'll try to find it asap) because this 'phone' is really good
Or it could be something really small that we can't see and do it wrong.

stergios89 said:
Don't give up on that.....I think there will be a solution sooner or later....(I'll try to find it asap) because this 'phone' is really good
Or it could be something really small that we can't see and do it wrong.
Click to expand...
Click to collapse
True man, fingers crossed I suppose

mloc33 said:
Seems that there`s no real method or solution, pity, it`s a waste of a phone the way it is..
Click to expand...
Click to collapse
Sirus2012 said:
I decided to make this post to help people bring life back to the I9505X live demo unit. I know how conflicting some some sites are so I just wanted to write something all can follow step for step. Hope it helps like it helped me
1 Download rom from www.sammobile.com
2 Once file is downloaded you will have something looking like this I9505XXUAMDM_I9505OXXAMDB_BTU.zip (this is one i used) http://www.sammobile.com/firmwares/?page=1&model=GT-I9505&pcode=0#firmware
3 Extract the zip file
4 You will now have somthing like this I9505XXUAMDM_I9505OXXAMDB_I9505XXUAMDM_HOME.tar.md5
5 Rename file to samrom.tar
6 Place this file on your desktop (this will be the tar file we want to edit)
7 Download cygwin from here http://cygwin.com/setup.exe and install
8 Move the tar file to C:\cygwin\home
10 Open cygwin
11 We need to delete some files from the tar file. to do so i will list the commands below and files that need deleting. after typing each line command please wait while the action completes as it will look like its doing nothing. commands as follows
$ tar --delete --file=samrom.tar NON-HLOS.bin
$ tar --delete --file=samrom.tar modem.bin
12 Once the last command is done just close cygwin (depending on the rom you download there maybe other files that need deleting)
the files remaining should be
boot.img
cache.img.ext4
hidden.img.ext4
recovery.img
system.img.ext4
(you can check this by opening the samrom.tar file with winrar)
13 Download odin and install from http://www.android.gs/download-odin-3-07/
14 Make sure samsung drivers are installed if they are not download em from http://www.mediafire.com/download/d2h54mx7kt4uupt/SAMSUNG_USB_Driver_for_Mobile_Phones(3).exe
15 Open odin and connect your S4
16 Click on PDA and place the samrom.tar file in there and click start (it will flash)
17 after it has flashed install TWRP and install adams kernel explained here http://forum.xda-developers.com/showthread.php?t=2256252&page=14
i hope this helps people who are having trouble installing roms on there S4 live demo unit. if you would like to know anything or having trouble message me im happy to try help.
Thanks to marian_86 for helping me sort out this problem for me
If this helped you please hit thank me
Click to expand...
Click to collapse
Well I think I figured it out with my S4 demo unit to make WiFi work.
All the steps were followed BUT...
I DIDN'T delete the two files(modem and NON-hlos) and continued with the procedure
The most important step was .17 which redirects you to another thread about TWRP and Adams Kernel...
Following the steps there where enough to solve my issue.
And now my WiFi works pretty good(so far so good at least for the last 2-3 hours )
Let me know if it worked for you too!
Cheers!

Related

[HELP] Odin FAIL!

I edited a ROM (JPA-Stock AOSP Theme 0.1), and I try to change the apps into factoryfs.rfs with MagicISO in Windows seven! I can do it, I changed and added many apps that I like! I save the factoryfs, but when I tried to flash my phone with that ROM, the ODIN shows me this fail:
"Big partition size!!"
And the ODIN starts to charge the factoryfs but never finish! =(
WHY?
Thank you for all!
UP! Help please!
"I changed and added many apps that I like"
You added too many apps and your factoryfs is just too big...
pff... Ok, I supose it... THANKS!
fersago said:
pff... Ok, I supose it... THANKS!
Click to expand...
Click to collapse
sorry buddy. I have no idea. Perhaps you can try to PM GSAM or others who post ROMS. They might be able to help you
Looks like you have added too many apps and size of the factoryfs.rfs is over 200MB. /system mount point is only 200MB. So you can not flash more than that.
OK, a lot of thanks for all!
I am trying make a ROM with a Factoryfs 200 MB below!
Of new, thanks
EDIT: I tried to make a factoryfs below 200mb, but ODIN shows me the same error! =(
Did u wipe dalvik cache and partition??
hold on! you said "I try to change the apps into factoryfs.rfs with MagicISO in Windows seven!" ??? how can you change apps into factoryfs.rfs??
this is the command you should use to dump factoryfs.rfs : "dd if=/dev/block/stl6 of=/sdcard/factory.rfs"
I don't understand why you need "MagicISO"...
J.Purungrit said:
hold on! you said "I try to change the apps into factoryfs.rfs with MagicISO in Windows seven!" ??? how can you change apps into factoryfs.rfs??
this is the command you should use to dump factoryfs.rfs : "dd if=/dev/block/stl6 of=/sdcard/factory.rfs"
I don't understand why you need "MagicISO"...
Click to expand...
Click to collapse
+1
JP mentioned the correct way.
Just copy as much apps your phone has space via adb command or qtadb or whatever a programm / app to your /system/app directory
When its full, its full.
Use the command mentioned above to dump your phone. The correct (and usable!) factory.rfs is found on your sdcard.
Take this file and a one package TAR file of any firmware flash file, echange the file in the TAR package and have fun with flashing via ODIN.
-> dont forget to exchange the kernel you need, too
OH...
this thread is some days old... maybe another user finds this thread via the search function and has use of the answers.
Cheers
qaysed

update fail

I tried manualy updating my I9000 to gingerbread through odin. the update fail however and now kies wont reccognise my phone. when i try to boot the phone it show a picture with a phone, a pc and an exclamation mark. what should i do?
Since u can see that pc icon means u can get into download mode also... Ie volume down + home + power... Now see that biggest file frm ur download ie pda/code......tar has the boot.bin and sbl.bin files... If yes just reflash it again... If now download sme othr gingerbread version with those two files and flash... just search for ramads thread in this section...
I mean this thread...
http://forum.xda-developers.com/showthread.php?t=1102881
thank you. i was trying to find that thread lol. Is going from eclair to gingerbread going to work or not? trying to find what the problem was.
If you're going between major versions you should do a factory reset (clear the /data section) as your apps may work differently and take advantage of new features. Not doing a factory reset may cause certain apps to FC.
Should work going straight from E to G though.
cheers guys. got everything working now.
Hi, may i know what happen if i can't go into download mode? But i still have the pc image.
Any solution?
fuuuuuuuuuuuuuuuuuuu. i think i have finaly ****ed up my phone. my dad accidently turned off my pc while i was flashing a galnet miui build with heimdall. i got into download mode but had to go out. when i came back my battery was dead and i cant charde the phone or get it into download mode. Any suggestions ?
edit: got it into download mode but odin doesnt recognise it
Try this:
prerequisite : the tools I used will only work on linux, so get yourself a ubuntu, or run one using virtual machine on windows, also install java (running sudo apt-get install openjdk-7-jre should be enough).
download UnBrickable Ressurector, code . google . com/p/hummingbird-hibl/downloads/list -> this is the reason for ubuntu only
run the downloaded jar file using sudo (it need root permission to run properly).
remove your phone battery, plug the usb cable in (connected to your computer), then reinsert your phone battery
now you have about 2s windows of opportunity to click that "Perform Ressurection" button.
wait and your phone should now be in download mode.
now this download mode is a bit weird.. if you unplug the usb cable, the phone will go straight back to the blank screen, and you have to do the whole process all over again.. which is why, we're going to reflash and fixed the phone using heimdall. the flashing process is a bit different with odin, here's how :
download heimdall www glassechidna com au/products/heimdall/ and the frontend
open it using sudo (sudo heimdall-frontend)
extract the rar files you got here, and you will get 3 tar.md5 files.
extract all those files, BUT make sure that you extract the csc files LAST, also choose OK when you're asked to overwrite. you will get 8 files
now we're going to download the correct pit file : in heimdall choose the "utilities" tab, click on "detect", and it should print out "device detected". click save as, choose a name (don't need to put .pit as part of its name), and click download
switch to "flash" tab, then browse for the created pit file. the "add" button should be enabled now.
now you need to add all the extracted files one by one and it has to be in the correct partition name, here's the list :
kernel -> zImage
IBL + PBL -> boot.bin
CACHE -> cache.rfs
dbdatafs -> dbdata.rfs
factoryfs -> factoryfs.rfs
modem -> modem.bin
param -> param.lfs
SBL -> Sbl.bin
hit start, and the flashing should start. if all goes well, your phone should boot normally now
stef.t97 said:
edit: got it into download mode but odin doesnt recognise it
Click to expand...
Click to collapse
Gadget serial at Devica Manager - missing driver files, install SAMSUNG_USB_Driver_for_Mobile_Phones

Anyone Please compile LP for T530NU

as the title states please someone i perfer a smart dev here on xda to compile or get the lollipop offical update to work on the TAB4 10.1 SM-T530NU JUST A REQUEST NOT A DEMAND.
LGMONO said:
as the title states please someone i perfer a smart dev here on xda to compile or get the lollipop offical update to work on the TAB4 10.1 SM-T530NU JUST A REQUEST NOT A DEMAND.
Click to expand...
Click to collapse
There are three different cyanogenmod 12 (lollipop) ROMs listed in the development section compatible with the t530nu which are all better than stock anyway. I have the exact same model as you and have been on lollipop for months now and loving it
i understand that, i love and encourage CM and AOSP roms i have used them quite offen however i prefer stock because stock roms utilize the devices features and because there are so many devices the devs dont have time to port stock based apps in there modifications so there for i use stock roms for a daily driver. but i would always support custom roms to anyone as did you. thanks for the reply, would really like to get a stock based lp on the device.
Thanks
LGMONO said:
i understand that, i love and encourage CM and AOSP roms i have used them quite offen however i prefer stock because stock roms utilize the devices features and because there are so many devices the devs dont have time to port stock based apps in there modifications so there for i use stock roms for a daily driver. but i would always support custom roms to anyone as did you. thanks for the reply, would really like to get a stock based lp on the device.
Thanks
Click to expand...
Click to collapse
^^what he said.
I've been checking the forums throughout the day since the LP update came out hoping that someone ported it to the T530NU. Who knows when the official one will come out since the LP update for the T530 has only been released in Spain so far. I doubt it will be released for the T530NU until the update for the T530 is released in more regions.
Dudash said:
^^what he said.
I've been checking the forums throughout the day since the LP update came out hoping that someone ported it to the T530NU. Who knows when the official one will come out since the LP update for the T530 has only been released in Spain so far. I doubt it will be released for the T530NU until the update for the T530 is released in more regions.
Click to expand...
Click to collapse
and @LGMONO
I imagine it's possible to port the official update, here are my thoughts. Take the LP Odin file (the tar file) and open the tar.md5 file in winrar or 7zip. Extract all the files inside (system.img, boot.img, the modem.bin and everything) and make it into an update zip, (with updater-script and everything) but tailor it to be flashable with FlashFire. No idea if it'll work but that's what I'd try if I preferred touchwiz over cyanogenmod.
Edit: On the files you want to pull, I don't think you want to use cache.img or hidden.img, but yeah everything else.
thisisapoorusernamechoice said:
and @LGMONO
I imagine it's possible to port the official update, here are my thoughts. Take the LP Odin file (the tar file) and open the tar.md5 file in winrar or 7zip. Extract all the files inside (system.img, boot.img, the modem.bin and everything) and make it into an update zip, (with updater-script and everything) but tailor it to be flashable with FlashFire. No idea if it'll work but that's what I'd try if I preferred touchwiz over cyanogenmod.
Edit: On the files you want to pull, I don't think you want to use cache.img or hidden.img, but yeah everything else.
Click to expand...
Click to collapse
T, hey hey, you only want the system.img and the boot.img, the issue though is the kernel, my attempts at getting the firmware running "as-is"
fail, [kernel] while i can access through adb i couldn't get a read on logcat even when invoking with full/absolute path
/system/bin/logcat
the sepolicy is covering adb and as i'm learning , sometimes permission denied actually means no such file or directory
and/or the opposite :silly: gotta love android.
m
moonbutt74 said:
T, hey hey, you only want the system.img and the boot.img, the issue though is the kernel, my attempts at getting the firmware running "as-is"
fail, [kernel] while i can access through adb i couldn't get a read on logcat even when invoking with full/absolute path
/system/bin/logcat
the sepolicy is covering adb and as i'm learning , sometimes permission denied actually means no such file or directory
and/or the opposite :silly: gotta love android.
m
Click to expand...
Click to collapse
I know they got a custom kit Kat kernel going for cm11 NU, did anything come of getting that working for cm12 and would that be of use in this instance? (Yeah I haven't checked the thread in a little while because I'm lazy and inattentive)
thisisapoorusernamechoice said:
I know they got a custom kit Kat kernel going for cm11 NU, did anything come of getting that working for cm12 and would that be of use in this instance? (Yeah I haven't checked the thread in a little while because I'm lazy and inattentive)
Click to expand...
Click to collapse
T
hey, you forgot irrepressibly polysyllabic ! xD
okay seriously though, i'm momentarily stumped as to what's going on with my t330nu but later later tonight i'll run a kernel compile and try the t530 rom again.
m
thisisapoorusernamechoice said:
and @LGMONO
I imagine it's possible to port the official update, here are my thoughts. Take the LP Odin file (the tar file) and open the tar.md5 file in winrar or 7zip. Extract all the files inside (system.img, boot.img, the modem.bin and everything) and make it into an update zip, (with updater-script and everything) but tailor it to be flashable with FlashFire. No idea if it'll work but that's what I'd try if I preferred touchwiz over cyanogenmod.
Edit: On the files you want to pull, I don't think you want to use cache.img or hidden.img, but yeah everything else.
Click to expand...
Click to collapse
i tried that lol it didnt work im a .net dev not an android dev i assure you the android devs are much smarter however i did try that method already i purchased ODIN mobile and the device is not supported, when i did try with odin pc version the erro is the aboot and fails im very sure the system will work on t530nu
LGMONO said:
i tried that lol it didnt work im a .net dev not an android dev i assure you the android devs are much smarter however i did try that method already i purchased ODIN mobile and the device is not supported, when i did try with odin pc version the erro is the aboot and fails im very sure the system will work on t530nu
Click to expand...
Click to collapse
Nah you don't want to try this with Odin it verifies what device you have. I say try flashfire instead (chainfire even said FF is intended to replace mobile Odin as well as safestrap) but we have to figure something out for the kernel (boot.img).
@moonbutt74 I was able to flash t530/1 ROMs before anyone started developing NU specific custom kernels, is it not working here because it's an official build or something? Sorry for my frustratingly persistent dearth of knowledge.
moonbutt74 said:
T
hey, you forgot irrepressibly polysyllabic ! xD
okay seriously though, i'm momentarily stumped as to what's going on with my t330nu but later later tonight i'll run a kernel compile and try the t530 rom again.
m
Click to expand...
Click to collapse
Finally another individual understands my irresistible urge to layer on excess syllables with each successive increment of agitation I am provoked to. Also my father is a lawyer (lmao). I'll try some things for this tonight, I don't really expect success (or really anything other than a soft brick) but my curiosity is officially piqued, I'll make this my project for tonight
LGMONO said:
i tried that lol it didnt work im a .net dev not an android dev i assure you the android devs are much smarter however i did try that method already i purchased ODIN mobile and the device is not supported, when i did try with odin pc version the erro is the aboot and fails im very sure the system will work on t530nu
Click to expand...
Click to collapse
L,
hi, this step carries risk, make a backup !!
what you need, from the full firmware img extract system.img and boot.img
pack system.img for odin flash, this is the tricky part, it's one of the following
A- rename system.img.ext4 to system.img
--- then in linux/cygwin cd to the directory where system.img is located
--- run tar as follows
--- tar -H ustar -c system.img > system.img.tar
--- md5sum -t system.img.tar >> system.img.tar
--- mv system.img.tar system.img.tar.md5
or
B- don't rename system.img.ext4 and run again in linux/cygwin
--- tar -H ustar -c system.img.ext4 > system.img.ext4.tar
--- md5sum -t system.img.ext4.tar >> system.img.ext4.tar
--- mv system.img.ext4.tar system.img.ext4.tar.md5
then attempt attempt odin flash, NOT MOBILE ODIN
do the same for boot.img
m
thisisapoorusernamechoice said:
Nah you don't want to try this with Odin it verifies what device you have. I say try flashfire instead (chainfire even said FF is intended to replace mobile Odin as well as safestrap) but we have to figure something out for the kernel (boot.img).
@moonbutt74 I was able to flash t530/1 ROMs before anyone started developing NU specific custom kernels, is it not working here because it's an official build or something? Sorry for my frustratingly persistent dearth of knowledge.
Finally another individual understands my irresistible urge to layer on excess syllables with each successive increment of agitation I am provoked to. Also my father is a lawyer (lmao). I'll try some things for this tonight, I don't really expect success (or really anything other than a soft brick) but my curiosity is officially piqued, I'll make this my project for tonight
Click to expand...
Click to collapse
can you give me a download link to flashfire please i tried searching for this i cant find it ? please thanks
moonbutt74 said:
L,
hi, this step carries risk, make a backup !!
what you need, from the full firmware img extract system.img and boot.img
pack system.img for odin flash, this is the tricky part, it's one of the following
A- rename system.img.ext4 to system.img
--- then in linux/cygwin cd to the directory where system.img is located
--- run tar as follows
--- tar -H ustar -c system.img > system.img.tar
--- md5sum -t system.img.tar >> system.img.tar
--- mv system.img.tar system.img.tar.md5
or
B- don't rename system.img.ext4 and run again in linux/cygwin
--- tar -H ustar -c system.img.ext4 > system.img.ext4.tar
--- md5sum -t system.img.ext4.tar >> system.img.ext4.tar
--- mv system.img.ext4.tar system.img.ext4.tar.md5
then attempt attempt odin flash, NOT MOBILE ODIN
do the same for boot.img
m
Click to expand...
Click to collapse
Thank you i will try this and thanks to all that is participating in this thread.. i have a lg g3 i just updated to lollipop and i like it, but remember for you guys out there newbees so to say at least try and give support for AOSP and Cyan roms i am a huge fan. Give them devs the credit they work hard for
LGMONO said:
can you give me a download link to flashfire please i tried searching for this i cant find it ? please thanks
Click to expand...
Click to collapse
Chainfire said:
- Join the G+ community using the same Google account as you're using for Play on your phone/tablet here: https://plus.google.com/communities/116661625291346007584
- Sign up to receive the BETA versions from Play here: https://play.google.com/apps/testing/eu.chainfire.flash
- Use the link provided after sign-up to download the app. Note that it may take minutes to even hours before the provided link actually works.
Click to expand...
Click to collapse
Link to Chainfire's FlashFire thread: http://forum.xda-developers.com/showpost.php?p=59959596&postcount=1
LGMONO said:
can you give me a download link to flashfire please i tried searching for this i cant find it ? please thanks
Click to expand...
Click to collapse
Here
But try what moonbutt74 is saying first, he's smarter than I. I'm just thinking aloud about all the (probably almost certainly stupid) stuff I'm going to try to get this working
T,
i have a though about incorrect firmware linking in boot.img and /system/etc scripts in the release
to mount and explore the system.img goto directory where extracted image is located and run
simg2img system.img.ext4 system.img
when thats done
mkdir system
mount -o rw -t ext4 system.img system
for the boot img goto @osm0sis 's AIK thread and get the linux package
use that toolkit to unpack the boot.img and check it out, you'll generate two directories after img unpacking,
ramdisk and split-image in split-image directory you will find the kernel and dtb imgs
m
yeah the link on google play is dead lol
nevermind i got it thanks
moonbutt74 said:
T,
i have a though about incorrect firmware linking in boot.img and /system/etc scripts in the release
to mount and explore the system.img goto directory where extracted image is located and run
simg2img system.img.ext4 system.img
when thats done
mkdir system
mount -o rw -t ext4 system.img system
for the boot img goto @osm0sis 's AIK thread and get the linux package
use that toolkit to unpack the boot.img and check it out, you'll generate two directories after img unpacking,
ramdisk and split-image in split-image directory you will find the kernel and dtb imgs
m
Click to expand...
Click to collapse
^^This guy is very smart ^^ i will try that as well i really wanna get these guys the lp for t530nu here in America we are being neglected with the official lollipop update samsung is slacking here i say less talk and more work for them people lol. we would probably all have our lollipop by now. jk
moonbutt74 said:
T,
i have a though about incorrect firmware linking in boot.img and /system/etc scripts in the release
to mount and explore the system.img goto directory where extracted image is located and run
simg2img system.img.ext4 system.img
when thats done
mkdir system
mount -o rw -t ext4 system.img system
for the boot img goto @osm0sis 's AIK thread and get the linux package
use that toolkit to unpack the boot.img and check it out, you'll generate two directories after img unpacking,
ramdisk and split-image in split-image directory you will find the kernel and dtb imgs
m
Click to expand...
Click to collapse
Thanks M I'll get started once I get back from my daily run (I refuse to be a fat American stereotype :silly: )

[Guide] Flashing Firmware on Linux/Ubuntu using Heimdall

Flashing Bootloader/Modem/Recovery etc with Heimdall on Linux
Tested on G930F / G935F
Code:
* I am not responsible for bricked devices
* You are choosing to make these modifications.
Guide for flashing Bootloader & Modem on G935F :
1. Install Heimdall
Ubuntu users can execute the following command in terminal :
sudo apt-get install heimdall-flash heimdall-flash-frontend
Click to expand...
Click to collapse
2. Download the Bootloader & Modem you wish to flash.
3. Remove the .md5 extension (erase .md5 from the name)
4. Decompress the renamed tar files and you will get cm.bin, param.bin,modem.bin & sboot.bin.
5. Place the files in a folder and cd to that folder from terminal . e.g cd Downloads
6. Launch Heimall using :
sudo heimdall-frontend
Click to expand...
Click to collapse
4. Detect device & download device pit
5. Open pit file in heimdall and select partitions CM, Radio, Param and Bootloader specifying location of each file respectively
6. Flash
How do you flash a firmware that's in zip file. .. the same way?? Trying to root sprint s7 with heimdall....
oct01 said:
How do you flash a firmware that's in zip file. .. the same way?? Trying to root sprint s7 with heimdall....
Click to expand...
Click to collapse
Don't do it. Your device has a locked bootloader. This guide is only for G935F.
Thank you
Can I install TWRP this way?
yes, you can install twrp , but its more easy if you use the terminal
Code:
heidmall flash --RECOVERY recovery.img
and it should take less than a minute , all done
Wasted the last 8(!) hours of my life with this crap. Do yourself a favour and just grab a Window$ computer, install Samsung drivers and use the latest Odin -- it took less than 5 min in total.
smoneck said:
Wasted the last 8(!) hours of my life with this crap. Do yourself a favour and just grab a Window$ computer, install Samsung drivers and use the latest Odin -- it took less than 5 min in total.
Click to expand...
Click to collapse
I use Linux for years heimdall v frustratingly hit & miss _ sometimes works sometimes no.pit file printed dodgy USB cables / ports et al one day device recognised next day nothing sadly I have to concur flashing is much easier using Doze and Odin . . .

flash firmware using Heimdall​ for Linux

Heimdall for Linux and mac - this is a program that is used on Linux that's​ similar to Odin for windows. It is capable of flashing extracted tar firmware AP,CP,CSC,and BL using download mode for Samsung devices.
This is not my program.
Also I am limited to Linux for heimdall so testing Mac I can not do but Instructions to install will also be posted using a link
I am testing how to flash the s7 for others limited to Linux or mac.
Linux install of Heimdall on Linux:
Go to the official website here: http://goo.gl/PQC1RN
Scroll down and click on Download(for Linux)
Click to download the Heimdall version for your Linux version (EX. ubuntu13.04-heimdall_1.4.0-0_amd64.deb will work with 14.04 & 13.04 64bit)
Click and download the frontend if you don't like to work inside the terminal
Open your Downloads folder and click to install the files you downloaded
Remember to open Heimdall as Admin(sudo) so it works correctly
Mac install:
http://rootmygalaxy.net/install-odin-jdoin3-for-mac-osx/
Steps to flashing frimware on linux:
1. open terminal and type sudo heimdall-frontend
2. look for flash tab
3. extract firmware zip to a folder then create 4 more folders named AP,BL,CP,and CSC
4. Rename AP,BL,CP,CSC by removing the .md5 part of the file name leaving only the .tar at the end
5. Extract each tar to its specific folder
6. Under the flash tab look for pit file and click browse, goto CSC folder and click the pit file
7. Now look for add and from the list under partition details choose which file to add then click browse under it should have the file name you are looking for under partition details if unsure what to put, go through each folder you made and keep adding each file
8. then click start
This is capable of flashing the firmware , as in the pictures it shows it works and fails, i am thinking because i am flashing all at once instead of each folder separate, or in the wrong order
there are forums on xda on how to use heimdall more extensivly but im just doing this for the s7 so productive comments are welcomed
Also this is being tested on a sprint version of the s7 g930p that has been flashed to g930u firmware, in the pictures im flashing a firmware i already have installed just incase i mess up
Capable of flashing everything but system.img
miko12312 said:
Capable of flashing everything but system.img
Click to expand...
Click to collapse
Should I give up on using Heimdall to flash my S7 active?
rabbiporkchop said:
Should I give up on using Heimdall to flash my S7 active?
Click to expand...
Click to collapse
Depends if you know how to use , I still haven't but also haven't used it,to flash ,there has been successful attempts at flashing samsung devices , you just need to put it in the correct order I believe but it does work there is a full forum on the program in xda

Categories

Resources