Related
Hello, friends.
I bought an Umi Super from someone, but when i try to open it, i get stuck at providing google account. The guy from who i bought it forget the password of the old Google Account. Is there a method to bypass the FRP? I know that in Android 5 it's easy to bypass this, but at Umi Super with Android 6 i don't know how to do it. Plase, help me.
Thank youl all in advance for your responses.
Boot to recovery and wipe everything, or make a reset factory data .....
Enviado do meu SHIELD Tablet K1 através de Tapatalk
bodyjoao said:
Boot to recovery and wipe everything, or make a reset factory data .....
Enviado do meu SHIELD Tablet K1 através de Tapatalk
Click to expand...
Click to collapse
Thank you for your response, but i've already tried and also keep asking me the old account that i don't know the password.
Hello is it mtk?
asadnow2k said:
Hello is it mtk?
Click to expand...
Click to collapse
MediaTek Helio P10
well send me teamviewer id and pass via pm i can try to get it done remotely
asadnow2k said:
well send me teamviewer id and pass via pm i can try to get it done remotely
Click to expand...
Click to collapse
Sorry, but i can't do that. I'll appreciate if someone can help me here with a small tutorial or a private message. Thank you for understanding.
Man, go to recovery and make wipe everything, to make the system like knew, its the only way .....recover the sistem to ....
Enviado do meu SHIELD Tablet K1 através de Tapatalk
bodyjoao said:
Man, go to recovery and make wipe everything, to make the system like knew, its the only way .....recover the sistem to ....
Enviado do meu SHIELD Tablet K1 através de Tapatalk
Click to expand...
Click to collapse
I wiped everything, except the system. It didn't help. What security solution will be FRP if you can go to recovery , wipe everything and all will be like new?? Any other solutions?
Wise.Guy said:
I wiped everything, except the system. It didn't help. What security solution will be FRP if you can go to recovery , wipe everything and all will be like new?? Any other solutions?
Click to expand...
Click to collapse
Well, that's the risk of having custom recovery. I guess you need to have completely clean system and to do that download full ROM (preferably most recent one from UMI official website) and flash it via SPFT.
washoq said:
Well, that's the risk of having custom recovery. I guess you need to have completely clean system and to do that download full ROM (preferably most recent one from UMI official website) and flash it via SPFT.
Click to expand...
Click to collapse
No, it's not custom recovery, the phone isn't rooted. I haven't tried yet to flash official rom via SPFT because i want to know for sure if this method solve my problem.
Wise.Guy said:
No, it's not custom recovery, the phone isn't rooted. I haven't tried yet to flash official rom via SPFT because i want to know for sure if this method solve my problem.
Click to expand...
Click to collapse
Flash the latest stock rom with SP Flashtool and it will solve your problem. It will restore the recovery to stock recovery and the phone will be like new. This is your only option in this situation you found yourself in. Now please close this thread as this matter now is solved.
Creedo4Life said:
Flash the latest stock rom with SP Flashtool and it will solve your problem. It will restore the recovery to stock recovery and the phone will be like new. This is your only option in this situation you found yourself in. Now please close this thread as this matter now is solved.
Click to expand...
Click to collapse
I repeat, i have stock recovery, the phone isn't rooted. I'm afraid that after flashing an official rom the FRP will still be present and it will still ask me for the old account's details.
Wise.Guy said:
I repeat, i have stock recovery, the phone isn't rooted. I'm afraid that after flashing an official rom the FRP will still be present and it will still ask me for the old account's details.
Click to expand...
Click to collapse
The FRP will be wiped when you flash the stock rom. Regardless if you have stock / custom of anything. Mate, you do as you see fit.
Creedo4Life said:
The FRP will be wiped when you flash the stock rom. Regardless if you have stock / custom of anything. Mate, you do as you see fit.
Click to expand...
Click to collapse
did you solved it ?
hi
i have the same FRP problem
i try all stock firmware (downloaded Umi Forum) and factory recovery full data clear, and nothing, still ask me for old google account
i try another method on youtube umi hammer frp remove but it show to activate developer mode, i try many times click on options info menu, but still system not unlocking, not show developer mode menu
for all another phone unlock dev mode is no problem, first time i see on umi super is not possible
any idea ?
Hi
I found a way to save Umi Super if you lost google account name, password.
All the methods described on the web have failed, I'm nervous reading various nonsense.
Umi Super its very hard to reset FRP without hardware programer...... but i worked on it for 20 hours and..... succes
Only method (very dangerous) is full format and flash new firmware (20161121_c239v55_kw_u1) with SPFT. You lost imei (must backup it before format or write to save place, photo etc.).
Now flash TWRP, reboot to new recovery, root (install SuperSU) and restore imei (with another software), run official (OTA) 2 new update and .... You have 100% working phone with New pure official Umi Android 7
sorry if my post not clear or poor English
any question please write to me
EDIT: I have successfully used this on the latest officiall Android 7 (Nougat) release. Don't know about others.
Hi, it is possible to bypass like this (you need some knowledge of adb, but it's not so hard to acquire):
1. Follow these steps to enable usb debugging on your phone:
http://forum.xda-developers.com/showpost.php?p=66731042&postcount=260
2. boot phone, connect usb
3. on computer run this command in terminal that has adb:
"adb shell am start -n com.google.android.gsf.login/.LoginActivity"
4. three dot menu > browser sign-in > login with any google account
5. reboot
---
If you cannot enable usb debugging you can also use the BypassFRP.apk from this link (don't follow the other instructions, just use the app). It does the same thing as step 3 above.
https://albviral.com/how-to-bypass-...-2016-on-all-android-devices-easy-method-440/
---
I am on mobile, if you need better explanation, let me know.
Wise.Guy said:
Hello, friends.
I bought an Umi Super from someone, but when i try to open it, i get stuck at providing google account. The guy from who i bought it forget the password of the old Google Account. Is there a method to bypass the FRP? I know that in Android 5 it's easy to bypass this, but at Umi Super with Android 6 i don't know how to do it. Plase, help me.
Thank youl all in advance for your responses.
Click to expand...
Click to collapse
Have you gotten it fixed? If not... You selling your phone? Lol
Hello Redmi mates
Please help me..., my Redmi 3s pattern locked and i forgot it too,
but now need to hard reset its not entering recovery mode nor its
Not entering to Download mode/edl mode to flash
then what to do how to do please............
Fastmod work or not
Sent from my Redmi 3S using Tapatalk
If you have set up a Mi or Google account on your phone, you can go to Mi Cloud or Android Device Manager to reset your phone.
You need an EDL cable to boot into EDL with newest MIUI version
isarfb said:
Fastmod work or not
Sent from my Redmi 3S using Tapatalk
Click to expand...
Click to collapse
Fastboot and adb mode both are working and its detecting too
Same here, i cant boot into recovery or download mod.
I also forgot my pattern lock and want to flash stock rom.
Device - Redmi 3S Prime
Rom - MIUI Official Stock
Status - Locked Bootloader
Plz help me...
Hey guys just type command adb reboot recovery in adb folder you should boot to recovery else check device drivers
thippesh96 said:
Hello Redmi mates
Please help me..., my Redmi 3s pattern locked and i forgot it too,
but now need to hard reset its not entering recovery mode nor its
Not entering to Download mode/edl mode to flash
then what to do how to do please............
Click to expand...
Click to collapse
KHEMS91 said:
Same here, i cant boot into recovery or download mod.
I also forgot my pattern lock and want to flash stock rom.
Device - Redmi 3S Prime
Rom - MIUI Official Stock
Status - Locked Bootloader
Plz help me...
Click to expand...
Click to collapse
Today, my friend give me his redmi 3s with pattern locked (UBL), no edl, no dfc, and wanna HARD RESET the devices.
Guest what??? I'm successfully to wipe all data in his device, and now its now work just fine
I will soon update a .bat script to boot to edl mode just follow my thread https://forum.xda-developers.com/xiaomi-redmi-3s/how-to/bootloader-unlock-twrp-flashing-rooting-t3565558
SILF0X said:
Today, my friend give me his redmi 3s with pattern locked (UBL), no edl, no dfc, and wanna HARD RESET the devices.
Guest what??? I'm successfully to wipe all data in his device, and now its now work just fine
Click to expand...
Click to collapse
OmG Then How?......may be it is not updated to latest version? (MIUI)
I tried possible ways do it.... Only one balance is to make my own EDL cable for flashing
So... did you try as I said in post #3?
joe34 said:
So... did you try as I said in post #3?
Click to expand...
Click to collapse
Yes, it's work.
Thanks...
It is advisable to have a Mi Account or Google Account on the device for reasons just like this situation you are in. Also, you don't have to turn on OEM unlocking or USB debugging to reset your device from a Mi or Google Account.
Lemme ask you something, how do I know you are telling the truth? How do I know this isn't a stolen device? Is anyone thinking that they may be assisting a thief? I wonder.
BTW, I was addressing the OP, not you. It seems you have taken over the thread from the OP.
joe34 said:
So... did you try as I said in post #3?
Click to expand...
Click to collapse
I tried both
it shows I am not turned on in settings
---------- Post added at 07:29 AM ---------- Previous post was at 07:27 AM ----------
Thank you guys
Finally I did it..........:highfive: with EDL cable
---------- Post added at 07:31 AM ---------- Previous post was at 07:29 AM ----------
joe34 said:
It is advisable to have a Mi Account or Google Account on the device for reasons just like this situation you are in. Also, you don't have to turn on OEM unlocking or USB debugging to reset your device from a Mi or Google Account.
Lemme ask you something, how do I know you are telling the truth? How do I know this isn't a stolen device? Is anyone thinking that they may be assisting a thief? I wonder.
BTW, I was addressing the OP, not you. It seems you have taken over the thread from the OP.
Click to expand...
Click to collapse
Thank you for your concern.........:highfive:
I have an Mi A1.
I was doing nothing technical on it and have no idea how it went into bootloop.
It is not rooted. Bootloader is locked. USB debugging, OEM unlocking probably all disabled.
I want to get my data (internal storage) (just pictures and videos).
How do I get to my data, please help.
Download the og rom from http://en.miui.com/download-333.html and flash it via mi flash tool don't forget to click in the button 'save user data' below
Is there a way to recover a photo after the factory reset? I got a bootloop and did this process (TWRP said it did not touch the internal storage when doing it). Sorry for the google translator xD.
Is your bootloader unlocked? Maybe you can try booting TWRP and connect the phone to PC, TWRP has MTP enabled, then you should see your files and copy it.
EDIT: After copying files, you should flash another ROM or even the Stock.
i have also face this problem.. Need help !!!
Jerry589 said:
I have an Mi A1.
I was doing nothing technical on it and have no idea how it went into bootloop.
It is not rooted. Bootloader is locked. USB debugging, OEM unlocking probably all disabled.
I want to get my data (internal storage) (just pictures and videos).
How do I get to my data, please help.
Click to expand...
Click to collapse
My phone also on bootloop the day when i have captured around hundred pictures.. but when i open my phone i get a popup says mi a1 system failure..
i need my data.. Plz tell me how to save my data
emiljano539 said:
Download the og rom from http://en.miui.com/download-333.html and flash it via mi flash tool don't forget to click in the button 'save user data' below
Click to expand...
Click to collapse
from where to download the flash tool? please help. i dont want to lose my data. i am not formatting my device because of some crucial data. please reply ASAP.
KDPalekar said:
from where to download the flash tool? please help. i dont want to lose my data. i am not formatting my device because of some crucial data. please reply ASAP.
Click to expand...
Click to collapse
You can download from here : https://xiaomiflashtool.com/
Please do a little research before comenting.. Peace out
A little late to the thread. I have same problem as OP but when I try to flash the new ROM it says "FAILED "device is locked. Cannot erase"
Any suggestions? would mean the world to me
Well, I f*cked up.
Fastboot works, I can flash stock rom via Xiaomi Flash. Flashing completes without any problems. A notification about encypting phone shows up, at 3% it jumps to 100% and resumes boot. Now after each boot, phone freezes at "input your sim pin" and reboots. Over and over again. What can I try, please help :
edited
twister26 said:
There is an reward for whoever helps me solve this issue
Click to expand...
Click to collapse
u try put your sim on other phone and remove the pin from them , maybe the boot skip that part and dont get freeze
dfranco51207 said:
u try put your sim on other phone and remove the pin from them , maybe the boot skip that part and dont get freeze
Click to expand...
Click to collapse
no luck, removed sim and now it reboots as soon as android one text is displayed
I've also tried wiping cache in default recovery, no luck
twister26 said:
no luck, removed sim and now it reboots as soon as android one text is displayed
I've also tried wiping cache in default recovery, no luck
Click to expand...
Click to collapse
Try to format data in twrp or stock recovery.
If it does not work flash an android 8.0 or Nougat ROM. Do not lock the bootloader.
Let me guess. From Pie to Oreo or Nougat?
Mercoory said:
Let me guess. From Pie to Oreo or Nougat?
Click to expand...
Click to collapse
yes, exactly is there a thread already open somewhere here and i missed? last time TWRP was working, I even got a message "your system has been destroyed" or something like that.
sipollo said:
Try to format data in twrp or stock recovery.
If it does not work flash an android 8.0 or Nougat ROM. Do not lock the bootloader.
Click to expand...
Click to collapse
will try!
https://forum.xda-developers.com/mi-a1/how-to/tutorial-downgrade-9-0-to-8-1-edl-imei-t3879624
ccalixtro said:
https://forum.xda-developers.com/mi-a1/how-to/tutorial-downgrade-9-0-to-8-1-edl-imei-t3879624
Click to expand...
Click to collapse
will give it a read, it it works, I'll PM you and you'll give me your paypal address. Fair is fair.
can't unlock OEM, because I can't boot up to developer tools. great, just great. will try to fix that first.
if you can boot to fastboot try to flash stock pie 10.0.4.0 with miflash, after that your device should be able to boot, than unlock OEM and bootloader and downgrade to what version you want
fdc77 said:
if you can boot to fastboot try to flash stock pie 10.0.4.0 with miflash, after that your device should be able to boot, than unlock OEM and bootloader and downgrade to what version you want
Click to expand...
Click to collapse
I can get to fastboot yeah, but MiFlash tool says that remote oem unlock is not allowed. So I'll probably have to open it up for EDL. Reboot to edl isn't working. Thanks for the advice tho.
twister26 said:
I can get to fastboot yeah, but MiFlash tool says that remote oem unlock is not allowed. So I'll probably have to open it up for EDL. Reboot to edl isn't working. Thanks for the advice tho.
Click to expand...
Click to collapse
i had a problem like yours, but i have flashed stock rom in non EDL mode and everything had start to work apart LTE band missing that i restored with qualcomm's tools
which stock rom have you try to flash? are you downgrading from oreo? bootloop on android one logo after downgrading is a common issue due to ARB (anti rollback protection)
twister26 said:
Whoever saves my precious Mi A1 gets 10$ on his paypal.
Click to expand...
Click to collapse
This is ****
This is not XDA spirit
You can get help without to pay
Please cancel the reward, do it. For all the people on this community.
tropbel said:
This is ****
This is not XDA spirit
You can get help without to pay
Please cancel the reward, do it. For all the people on this community.
Click to expand...
Click to collapse
reward is cancelled from this point on i will reward the one who helped me so far tho. still working on solving the problem so winner has not been decided yet.
you don't understand.
There are no winners and no loosers.
You are free to donate to anyone you want, but your post boost and encourages a bad attitude.
If people start to solve only paid problems, the spirit of the community will be destroyed.
The problem is with the Pie specific partition table
I write the whole guide from memory, so it can differ a bit.... I skipped some steps ( erasing, reboot, fastboot mode, TWRP loading via fastboot, OEM unlock )
From previous writings I think you can know the skipped steps.
Keep in mind: It is dangerous, you can loose your IMEI ( it will only work again with Pie - or there are some writings at forum how can you manually change it. ).
Steps:
1 - Backup with TWRP (fastboot) efs,persist,modem & make copy to your computer and or to your cloud provider.
2 - Create a new folder in Internal Storage -> TWRP -> BACKUP -> With a new date directory ( the backup already made one, make a new folder, with different date )
3 - Download someone's older TWRP backup from xda (I cheated, I copied the following links ) :
(I'm still a new user, so can't directly write url's )
Mediafire : https COLON SLASH SLASH bit.ly SLASH 2QU5NtC
Mirror: Google Drive : https COLON SLASH SLASH bit.ly SLASH 2UN1DTo
4 - Unpack, and copy EFS to the folder created 2 point
5 - Fastboot TWRP -> Restore EFS
6 - Flash the Official latest firmware from en.miui.com ( If you want to make sure go with EDL mode )
7 - Now, the IMEI & Mac addresses are missing. Don't panic! Download update with System Updates.
8 - When you are on Pie again, restore your first TWRP (fastboot) persist partition
9 - One more System restore
At this time, you will have IMEI & Mac addressees, and hopefully a working phone.
Hope this helps. The same thing happened with me 2 weeks ago. This is how I solves it.
Thank you, I solved it yesterday. Hopefully this post will come in handy for other people!
Hi.
I have the Samsung galaxy j5 2017(sm-j530f) model and i forgot the pattern i have lock my phone.
How i delete it without remember it?
Already do wipe data(factory defaults) & cache but still when i start the phone it ask me the lock pattern.
I try to download the firmwares:
J530FXXU1AQF5_J530FBTU1AQED_BTU_4file
AP_J530FXXU2BRH5_CL14125461_QB19348991_REV00_user_low_ship_meta.tar
But it failed after it connected to the phone.
U tried from recovery mood?
Yes but it doesnt work.
I'm afraid to say that you need to flash stock rom again and your data will be lost for that Try to remember password/pattern ...thank you
---------- Post added at 11:15 PM ---------- Previous post was at 11:10 PM ----------
fits79 said:
Yes but it doesnt work.
Click to expand...
Click to collapse
You can flash with Odin... And also you'll find instructions how to flash... You can do it all alone... Lemme know if you find difficulties
I try that to. Still doesn't work
fits79 said:
I try that to. Still doesn't work
Click to expand...
Click to collapse
Try guessing pattern several times , it will lock your device and will guide you through your associated account(Don't say that you've forgot that one too)
No simply I tallied you cause I have months to use that mail. Now that mail doesn't exist........
Finally I got that you're kidding with me... Nvm
Are you serious????
Really??
What i win if i am kidding with you?????
NO I WAS NOT KIDDING WITH YOU.
Everything i try when i open the mobile phone samsung galaxy j5 it ask me to connect with the internet and when is connected simply it ask me the pattern and this is the step i stuck.
It's so simple.
If you flash new stock rom via odin It won't ask you for password/pattern instead it will ask you to set with your email and password ...your device will be like a new one... To flash via odin...
First turn off your device,
Then press and hold power button + volume down maybe +home button together to boot into download mood... Search on google for proper key combination to boot into download mood,
Then flash via odin... That's all
As i see you are a new member of the site/forum so If you DON'T know please don't even post to my topic.
This was happening to old android versions NOT at android 8 and later.
I flash a totaly new samsung rom and it ask me pattern AFTER i connected to the internet.
So again PLEASE IF YOU DON'T KNOW SOMETHING THEN DON'T POST to my topic at all.
OK... Thank you
Sorry and it's my last post on ur forum
I'm also using J5(first it was lollipop and now it's marshmallow). I always root my device and run new experiment on it & for that I had to/have to flash a lot (even on locked device). To be honest I never found that one couldn't bypass forgotten patterns. I'm really surprised about your problem ! NVM
Maybe this link can help u...
https://www.google.com/url?sa=t&sou...FjAEegQIDhAK&usg=AOvVaw0aAUMh09WwLXm_jGcPEOww[/url]
In twrp open file manager and go to /data/system.
Look for any file with .key extension and any file with 'lockscreen' in its name and delete them.
Reboot and that should be it
If no twrp is installed delete them files through adb on a computer
---------- Post added at 02:36 PM ---------- Previous post was at 02:31 PM ----------
Or there is this method here on this thread https://forum.xda-developers.com/showthread.php?p=49666433#post49666433
If i know correct when you say twrp you mean custom recovery menu correct?
The mobile has the samsung genuine - original recovery menu so.....
And the mobile doesn't let me to go to the menu and install any app.
Cause after i power on the mobile it ask me to connect it to the internet and then simply ask me the pattern.
If you want i can take pictures with my other mobile and send it.
fits79 said:
If i know correct when you say twrp you mean custom recovery menu correct?
The mobile has the samsung genuine - original recovery menu so.....
And the mobile doesn't let me to go to the menu and install any app.
Cause after i power on the mobile it ask me to connect it to the internet and then simply ask me the pattern.
If you want i can take pictures with my other mobile and send it.
Click to expand...
Click to collapse
No I know what you mean.
Is USB debugging enabled do you know?
If it is you can try delete through adb commands.
The thread I posted above is probably your best bet for an answer.
No there is anything i can do.
Doesn't let me to go to mobile menu at all.
After i connected to the internet simply it blocked me out.
So simple.
Do you want to make you a video to see what i mean?
fits79 said:
No there is anything i can do.
Doesn't let me to go to mobile menu at all.
After i connected to the internet simply it blocked me out.
So simple.
Do you want to make you a video to see what i mean?
Click to expand...
Click to collapse
No I know exactly what you mean.
Without USB debugging or a custom recovery installed I don't know what else there is you can do.
What happens if you factory reset again but next time don't connect to the internet.
Just skip the setup procedure
I'm thinking something else... Like the way we remove frp lock... If otg supported, download and store bypass apk in a pendrive... Connect WIth otg... By default it may read pendrive without that pattern... If it happens u can install bypass apk which will open settings manu and a reset after that...
garylawwd said:
No I know exactly what you mean.
Without USB debugging or a custom recovery installed I don't know what else there is you can do.
What happens if you factory reset again but next time don't connect to the internet.
Just skip the setup procedure
Click to expand...
Click to collapse
You can't skip it.
You must connect with the internet it is one way road.
fits79 said:
You can't skip it.
You must connect with the internet it is one way road.
Click to expand...
Click to collapse
I think there is a way to bypass that by pressing the four corners of the screen or something similar