This is a guide to build your own CM7 on Mac OSX Lion. I can't guarantee 100% that this will work for everyone, but it worked for me. I want to thank Paul from Modaco, CyanogenMod team, Batista Harahap, ahbeng, and anyone else I can't remember atm.
1. Download and install Xcode, Java Mac OS X 10.5 SDK (later versions don't seem to work)
2. I recommend uninstalling existing MacPorts (using the codes below) and then install a fresh copy just to be safe.
Code:
$ sudo port -fp uninstall --follow-dependents installed
$ sudo rm -rf /opt/local /Applications/DarwinPorts /Applications/MacPorts /Library/LaunchDaemons/org.macports.* /Library/Receipts/DarwinPorts*.pkg /Library/Receipts/MacPorts*.pkg /Library/StartupItems/DarwinPortsStartup /Library/Tcl/darwinports1.0 /Library/Tcl/macports1.0 ~/.macports
3. Follow these steps below to teleport String errors at compile time
Code:
$ sudo vi /opt/local/etc/macports/sources.conf
* press ]]
* press i
* Append # at the beginning of the line
* Press Enter
* Add the following lines
Code:
file:///Users/Shared/dports
rsync://rsync.macports.org/release/ports/
* Press Esc
* Type :wq and press enter
4. Update Macports and install the necessary packages and revert gmake to 3.81 (This takes a long time)
Code:
$ sudo port selfupdate
$ POSIXLY_CORRECT=1 sudo port install gmake libsdl git-core gnupg e2fsprogs gsed curl libiptcdata xorg-libX* pngcrush findutils
$ sudo ln -s /opt/local/bin/gsed /opt/local/bin/sed
$ sudo ln -s /opt/local/libexec/gnubin/find /opt/local/bin/find
$ vi /opt/local/etc/macports/sources.conf
$ mkdir /Users/Shared/dports
$ cd /Users/Shared/dports
$ svn co --revision 50980 http://svn.macports.org/repository/macports/trunk/dports/devel/gmake/ devel/gmake/
$ portindex /Users/Shared/dports
$ sudo port install gmake @3.81
5. comment a line in one of Darwin’s C Library to get rid of compile time errors
Code:
$ sudo vi /usr/include/string.h
* Press :143
* Press i
* Append //
* Press Esc
* Type :wq!
* Press enter
6. Add a symlink for 10.5 SDKs
Code:
$ sudo ln -s /Developer/SDKs/MacOSX10.6.sdk /Developer/SDKs/MacOSX10.5.sdk
7. Create a sparseimage with a Case Sensitive FS
a. Open the Disk Utility (/Applications/Utilities/Disk Utility.app).
b. Click on New Image.
c. Save as "cyanogenmod.sparseimage" and set the following parameters as followed:
d. Name: "cyanogenmod"
e. Size: 15 GB is minimum recommended (A sparseimage will save unused space)
f. Format: Mac OS Extended (CASE-SENSITIVE, Journaled)
g. Encryption: none, Partition- Single Apple Partition Map
h. Image Format: Sparse Disk Image (this will save you disk space)
i. Save this wherever you like, and then double-click the sparseimage file to mount.
j. Your workspace will be: /Volumes/cyanogenmod/
8. Macports version of e2fsprogs will fail to compile, download the source and compile it yourself
Code:
$ mkdir -p ~/src
$ cd ~/src
$ git clone http://git.kernel.org/pub/scm/fs/ext2/e2fsprogs.git
$ cd e2fsprogs
$ ./configure --prefix=/opt/local
$ make -j4 && sudo make install
9. Set up the pre-requisites for CyanogenMod to compile, there are
Code:
$ cd /Volumes/cyanogenMod
$ mkdir -p bin
$ curl https://dl-ssl.google.com/dl/googlesource/git-repo/repo > bin/repo
$ chmod a+x bin/repo
$ mkdir -p android/system/
$ PATH=${PATH}:/Volumes/cyanogenmod/bin:
$ echo "PATH=\${PATH}:/Volumes/cyanogenmod/bin:" >> ~/.profile
10. Clone CyanogenMod repository into our sparse image (This takes a long time)
Code:
$ cd /Volumes/cyanogenmod/android/system
$ repo init -u git://github.com/CyanogenMod/android.git -b gingerbread
$ repo sync
11. Now to get all closed source binaries from the device and into our device build folder (replace *company* and *model* with the device you want e.g. /lge/p990)
Code:
$ cd /Volumes/cyanogenmod/android/system/device/*company*/*model*
$ ./extract-files.sh
12. ROMManager is a requirement for CyanogenMod
Code:
$ /Volumes/cyanogenmod/android/system/vendor/cyanogen/get-rommanager
13. edit cm source to make it compile on lion
Add lines in red to android/system/external/elfutils/config-compat-darwin.h:
Code:
[COLOR="Red"]#if __ENVIRONMENT_MAC_OS_X_VERSION_MIN_REQUIRED__ < 1070
[/COLOR]
static inline size_t strnlen (const char *__string, size_t __maxlen)
{
int len = 0;
while (__maxlen-- && *__string++)
len++;
return len;
}
[COLOR="red"]#endif[/COLOR]
Comment out every line in android/system/external/qemu/Android.mk:
Code:
# the following test is made to detect that we were called
# through the 'm' or 'mm' build commands. if not, we use the
# standard QEMU Makefile
#
#ifeq ($(DEFAULT_GOAL),droid)
# LOCAL_PATH:= $(call my-dir)
# include $(LOCAL_PATH)/Makefile.android
#else
# include Makefile.qemu
#endif
14. Now here comes the real fun, let’s compile CyanogenMod. (replace *model* with the device you want e.g. cyanogen_p990)
Code:
$ cd /Volumes/gingerbread/android/system/
$ cp ./vendor/cyanogen/products/cyanogen_*model*.mk ./buildspec.mk
$ . build/envsetup.sh
$ lunch cyanogen_*model*-eng
$ make -j`sysctl -an hw.logicalcpu` bacon
If the build was successful, there should be an update-cm-X.X.X-RC0-KANG-signed.zip in the /android/system/out/target/product/*model* folder.
If you were successful, go get yourself a treat.
Hello to everyone,
I'm trying to boot my Nexus 10 with another kind of kernel version,because I'm not interested to use the Android kernel,but the Ubuntu pure kernel. I've chosen to use the linux-kvm-arm kernel version 3.13 :
These are the commands that I have used :
git clone git://github.com/virtualopensystems/linux-kvm-arm.git
cd linux-kvm-arm
git checkout origin/chromebook-3.13 -b chromebook-3.13
curl http://www.virtualopensystems.com/downloads/guides/kvm_on_chromebook/config > .config
and then I've added these lines to the .config file :
CONFIG_ANDROID=y
CONFIG_ANDROID_BINDER_IPC=y
CONFIG_ASHMEM=y
CONFIG_ANDROID_LOGGER=y
CONFIG_ANDROID_PERSISTENT_RAM=y
CONFIG_ANDROID_RAM_CONSOLE=y
CONFIG_ANDROID_TIMED_OUTPUT=y
CONFIG_ANDROID_TIMED_GPIO is not set
CONFIG_ANDROID_LOW_MEMORY_KILLER=y
CONFIG_ANDROID_SWITCH is not set
CONFIG_ANDROID_INTF_ALARM is not set
CONFIG_FB_TILEBLITTING=y
CONFIG_PHONE is not set
CONFIG_USB_WPAN_HCD is not set
CONFIG_WIMAX_GDM72XX is not set
CONFIG_ARM_PLATFORM_DEVICES=y
CONFIG_ARM_CHROMEOS_FIRMWARE=y
CONFIG_CHROMEOS=y
CONFIG_CHROMEOS_VBC_BLK=y
CONFIG_CHROMEOS_VBC_EC=y
CONFIG_CHROMEOS_RAMOOPS_RAM_START=0x41f00000
CONFIG_CHROMEOS_RAMOOPS_RAM_SIZE=0x00100000
CONFIG_CHROMEOS_RAMOOPS_RECORD_SIZE=0x00020000
CONFIG_CHROMEOS_RAMOOPS_DUMP_OOPS=0x1
CONFIG_CLKDEV_LOOKUP=y
and then I did :
ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- make uImage dtbs
from here I've followed the tutorial that I've found here :
http://forum.xda-developers.com/showthread.php?t=1981788
and here :
http://forum.xda-developers.com/showthread.php?t=1981788&page=2
mkdir -p newkernel
cd newkernel
wget -c https://dl.google.com/dl/android/aosp/mantaray-kot49h-factory-174ba74f.tgz
tar xvzf mantaray-kot49h-factory-174ba74f.tgz
cd mantaray-kot49h
unzip image-mantaray-kot49h.zip
wget -c http://android-serialport-api.googlecode.com/files/getramdisk.py
chmod +x getramdisk.py
./getramdisk.py boot.img --> ramdisk.img
wget -c http://android-serialport-api.googlecode.com/files/android_bootimg_tools.tar.gz
tar xvf android_bootimg_tools.tar.gz
./mkbootimg --kernel ../../linux-kvm-arm/arch/arm/boot/zImage --ramdisk ramdisk.img --cmdline bootimg.cfg -o new-boot.img
fastboot flash boot new-boot.img
I think that something is wrong here,because it is not able to boot....I see a black screen and nothing else happens...
Hi,
probably too simple, but:
How does your .config look?
Did the curl actually work? (I ask because I tried your URL and it didn't work for me).
Did you actually compile a guest kernel too and boot it?
Special ChromeOS suupport does not exist in that branch.
Keep up the work, if you succeed booting linux, I got a prize for you.
Don't take it wrong, I'm just too bored of the tablet as it is now.
Wejgomi
The Sony-Kitakami dev team is glad to announce a guide on how to build CM13 or any CM13 based ROM for the entire Z5- series
Note: If you plan to release a ROM using our sources then credits aren't required, however we would deffinately appriciate it very much!
Before we get started
What you need
Any of our supported devices
A PC that is capable of running linux
An Internet connection
And lots of lots of patience
Getting started
Setting up Linux
To be able to build a ROM fully from source a Linux based operating system is required. This is due to the fact that windows is unable to compile the android source code due to lacking tools/libaries. After all you're compiling Linux on Linux (Because android is Linux). We strongly recommend to have AT LEAST 50 GB of space for Ubuntu!!!
Please be aware that this guide is target audiences with Ubuntu specifically and so may not work on other distros. Because of this we prefer ubuntu for everyone that is coming from windows.
Because this guide isn't about how to install ubuntu, I'll let this guide explain all for you : http://www.linuxtechi.com/ubuntu-15-10-desktop-installation-guide/
Installing the required packages
We will start off by downloading openjdk 7 (Note: Open JDK 8 isn't supported by CM yet).
Please open the terminal and enter or copy paste the following :
Code:
sudo apt-get update && sudo apt-get install openjdk-7-jdk
After entering the password (Note: you won't be able to see any output when typing the password) hit enter and then type "y" and hit enter again.
Once this is completed we will download the required packages. Please copy paste the following into your terminal :
Code:
sudo apt-get install git-core gnupg flex bison gperf build-essential
zip curl zlib1g-dev gcc-multilib g++-multilib libc6-dev-i386
lib32ncurses5-dev x11proto-core-dev libx11-dev lib32z-dev ccache
libgl1-mesa-dev libxml2-utils xsltproc unzip maven schedtool
You may have to enter your password again after hitting enter. Once that is done enter "y" again and hit enter again.
Additionally you can set up ccache by entering the following into the terminal :
Code:
echo 'export USE_CCACHE=1' >> ~/.bashrc
after this has been done, restart your PC.
Then we will set up git. Replace "Your name" with your name and "[email protected]" with your email :
Code:
git config --global user.name "Your Name"
git config --global user.email "[email protected]"
Now we will need to set up the repo tool. Copy the following into the terminal:
Code:
mkdir ~/bin && PATH=~/bin:$PATH && echo 'PATH=~/bin:$PATH' >> ~/.bashrc && curl https://storage.googleapis.com/git-repo-downloads/repo > ~/bin/repo && chmod a+x ~/bin/repo
Guides
CyanogenMod 13
Getting the CM13 source
Start out by making a directory called cm13 in your home dir by running the following command :
Code:
mkdir ~/cm13/
Now we will initialize the CM13 repository by entering the following in your terminal :
Code:
cd ~/cm13/ && repo init -u https://github.com/CyanogenMod/android.git -b cm-13.0
We are now coming to the worst part and that is downloading the entire 20GB big CM13 source code. To sync the source code, run the following command :
Code:
repo sync
And now wait.... and wait..... and wait....... until it's done
Getting the Z5/Z5C/Z5P source
To clone the device specific source code we'll have to introduce you to some of the codenames as those are used for simplifying reasons when building from source
Code:
NAME CODENAME
Sony Xperia Z5 sumire
Sony Xperia Z5 Compact suzuran
Sony Xperia Z5 Premium satsuki
We will start off by cloning the appropriate manifests for your device. Please enter the following and make sure to replace yourdevicecodename with your device codename :
Code:
cd ~/cm13/ && git clone https://github.com/Sony-Kitakami/android_.repo_local_manifests.git -b cm-13.0-yourdevicecodename .repo/local_manifests
Now we will sync our device specific source like this :
Code:
repo sync --force-sync
This could again take some time depending on your connection as the kernel source is quite heavy.
Building the ROM
We will now get to the big part, which is compiling. Note this could take from 1 hour to more than 10 hours depending on how good your PC is. Replace yourdevicecodename with your targeted device codename.
Please copy the following to your terminal line by line
Code:
cd ~/cm13/
cd .repo/local_manifests/ && git pull && cd ../.. && repo sync --force-sync
. build/envsetup.sh
lunch
cm_yourdevicecodename-userdebug
mka clobber
mka bacon
After a long time of waiting you should be done and your CyanogenMod package should be located in home/cm13/out/target/product/yourdevicecodename/
Congratulations! You have now build your very own CM13 ROM from source!
CyanogenMod 13 based ROMs
If you are planning to build a CM13 based or similar ROM (Bliss Pop, RR, Slim etc.), we're expecting you to be a more advanced user. As much as we would like to give a strict guide, we simply can't cover all as there are always differences between each and every ROM.
You will have to start off by downloading the ROM source. Again this should be similar to CM but the git links are different.
Ex:
Code:
RR = repo init -u [url]https://github.com/ResurrectionRemix/platform_manifest.git[/url] -b marshmallow
Bliss = repo init -u [url]https://github.com/BlissRoms/platform_manifest.git[/url] -b mm6.0
and much more. Most of them can be found on the ROMs official git team under the platform_manifest repo.
Here is where things get hard. You will have to edit our manifests and adjust them to work with your target ROM. This is nearly impossible to explain as each ROM contains different repos that may overlap with the CM ones or it may lack repos that you're trying to remove. In other words, you will need to learn how to use the local manifests. A nice guide exists here https://wiki.cyanogenmod.org/w/Doc:_Using_manifests
Once this is done you will have to adjust your device tree to work with your specific ROM. Again this is always different. The best way to learn is to compare a CM tree with a tree from a different ROM
Ex:
Samsung Galaxy S5 mini tree for CyanogenMod : https://github.com/cm-3470/android_device_samsung_kminilte
Samsugn Galaxy S5 mini tree for BlissPop : https://github.com/cm-3470/android_device_samsung_kminilte/tree/bosp-6
The main differences are the cm.mk or device.mk files etc.
Here is a commit that show the transfer from CM to Bliss Pop which usually isn't very hard
https://github.com/cm-3470/android_...mmit/5e902e7dd228c6804b2735af9a96ea02969aa2cf
Once this is completed you can run your build and release it!
XDA:DevDB Information
How to build CM13 from source for the Z5, ROM for the Sony Xperia Z5
Contributors
CTXz, zacharias.maladroit, Moonbutt74
Source Code: https://github.com/Sony-Kitakami
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: Stock Marshmalllow
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2016-04-12
Last Updated 2016-04-15
Reserved
Reserved
Thanks for posting the guide
I followed the steps, but got stuck at the command: "cd ~/cm13/ && git clone [email protected]:Sony-Kitakami/android_.repo_local_manifests.git -b cm-13.0-sumire"
It returned this to me:
Cloning into 'android_.repo_local_manifests'...
Permission denied (publickey).
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
EDIT: Never mind, I investigated, and found out that I had to generate an SSH key and link that to my GitHub account. If anyone needs help with this, I used this guide: https://help.github.com/articles/generating-an-ssh-key/
Uclydde said:
Thanks for posting the guide
I followed the steps, but got stuck at the command: "cd ~/cm13/ && git clone [email protected]:Sony-Kitakami/android_.repo_local_manifests.git -b cm-13.0-sumire"
It returned this to me:
Cloning into 'android_.repo_local_manifests'...
Permission denied (publickey).
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
EDIT: Never mind, I investigated, and found out that I had to generate an SSH key and link that to my GitHub account. If anyone needs help with this, I used this guide: https://help.github.com/articles/generating-an-ssh-key/
Click to expand...
Click to collapse
Hey, sorry for that. I had git set to ssh like and forgot that they require a keygen. I've changed it to https://github.com/Sony-Kitakami/android_.repo_local_manifests.git -b cm-13.0-yourdevicecodename so it no longer needs a key
Actually, is you are building CM13 and using Ubuntu 14.04 or up, you just need to type:
Code:
sudo apt-get install bison g++-multilib git gperf libxml2-utils make zlib1g-dev:i386 zip
Okay, I hit another bump. When I type: "cd .repo/local_manifests/ && git pull && cd ../.. && repo sync --force-sync"
It returns:
bash: cd: .repo/local_manifests/: No such file or directory
zhangyang_haha said:
Actually, is you are building CM13 and using Ubuntu 14.04 or up, you just need to type:
Code:
sudo apt-get install bison g++-multilib git gperf libxml2-utils make zlib1g-dev:i386 zip
Click to expand...
Click to collapse
No, you'll be missing quite some packages
Sent from my E5823 using XDA-Developers mobile app
Uclydde said:
Okay, I hit another bump. When I type: "cd .repo/local_manifests/ && git pull && cd ../.. && repo sync --force-sync"
It returns:
bash: cd: .repo/local_manifests/: No such file or directory
Click to expand...
Click to collapse
Ok updated again. Please run this.
cd ~/cm13/ && git clone https://github.com/Sony-Kitakami/android_.repo_local_manifests.git -b cm-13.0-yourdevicecodename .repo/local_manifests
CTXz said:
Ok updated again. Please run this.
cd ~/cm13/ && git clone https://github.com/Sony-Kitakami/android_.repo_local_manifests.git -b cm-13.0-yourdevicecodename .repo/local_manifests
Click to expand...
Click to collapse
Yay, that worked! However, I got to the "cm_yourdevicecodename-userdebug" line, so I entered "cm_sumire-userdebug", but that returned: "cm_sumire-userdebug: command not found"
Uclydde said:
Yay, that worked! However, I got to the "cm_yourdevicecodename-userdebug" line, so I entered "cm_sumire-userdebug", but that returned: "cm_sumire-userdebug: command not found"
Click to expand...
Click to collapse
This needs a
Code:
repo --sync
in between
Uclydde said:
Yay, that worked! However, I got to the "cm_yourdevicecodename-userdebug" line, so I entered "cm_sumire-userdebug", but that returned: "cm_sumire-userdebug: command not found"
Click to expand...
Click to collapse
When you type lunch it will show a big list of devices and prompt for an input. Enter cm_sumire-userdebug. You can also however run
Code:
lunch cm_sumire-userdebug
Sent from my E5823 using XDA-Developers mobile app
Nice guide, buddy
Binaries have been updated to v5a,
v4 is included in this, can you update please? I did it manually and got it to boot
I'm not able to push them to github.
http://developer.sonymobile.com/downloads/tool/software-binaries-for-aosp-m-android-6-0/
celderic said:
Binaries have been updated to v5a,
v4 is included in this, can you update please? I did it manually and got it to boot
I'm not able to push them to github.
http://developer.sonymobile.com/downloads/tool/software-binaries-for-aosp-m-android-6-0/
Click to expand...
Click to collapse
Is the camera working for you ?
Did the focus improve ? or are still changes needed ?
zacharias.maladroit said:
Is the camera working for you ?
Did the focus improve ? or are still changes needed ?
Click to expand...
Click to collapse
It doesn't work for me with v4, or v5a
Using the guide posted here, nothing changed only updated to v5a manually.
I haven't bothered to look through the log yet, bur it says camera hardware inaccessible or something like that I forget the exact wording. With v4 and v5a, I even downloaded the source again to make sure it wasn't a problem on my end.
I'll try and have a proper look tomorrow
celderic said:
It doesn't work for me with v4, or v5a
Using the guide posted here, nothing changed only updated to v5a manually.
I haven't bothered to look through the log yet, bur it says camera hardware inaccessible or something like that I forget the exact wording. With v4 and v5a, I even downloaded the source again to make sure it wasn't a problem on my end.
I'll try and have a proper look tomorrow
Click to expand...
Click to collapse
Yeah, we kinda apologize for that. My linux environment has broken hard after upgrading to ubloatu, i mean Ubuntu 16.04... I'm busy updating to debian now, and will most likely stick with debian jessie as sid and stretch ended in an huge catastrophy. Thanks to @moonbutt74 for not warning me. (<- Only a joke, he actually predictied that sid will be a catastrophy but I didn't listen cuz that's me). I'll also most likely need to update the guide too as we no longer prefer/recommend ubuntu 16.04
Sent from my E5823 using XDA-Developers mobile app
celderic said:
It doesn't work for me with v4, or v5a
Using the guide posted here, nothing changed only updated to v5a manually.
I haven't bothered to look through the log yet, bur it says camera hardware inaccessible or something like that I forget the exact wording. With v4 and v5a, I even downloaded the source again to make sure it wasn't a problem on my end.
I'll try and have a proper look tomorrow
Click to expand...
Click to collapse
@celderic
did you do any modifications to the repos ?
If not did the kernel built with the ROM work for you ?
Thanks
edit:
v04 and v05a binary blobs are the same for us (Kitakami)
Changes in v05a was for kanuti, rhine, shinano and yukon
zacharias.maladroit said:
@celderic
did you do any modifications to the repos ?
If not did the kernel built with the ROM work for you ?
Thanks
edit:
v04 and v05a binary blobs are the same for us (Kitakami)
Changes in v05a was for kanuti, rhine, shinano and yukon
Click to expand...
Click to collapse
Sorry been on holiday not had time to reply on here, oh I didn't realise they where the same for our device.
I didn't modify the repos, and yes the stock cm kernel booted fine.
openjdk-7 isnt available under ubuntu 16.04. Is 8 or 9 supported yet or do I have to manually install v7?
How To Build MoKee Rom For Exynos5420 Device (7.1.2)Support Device :
HTML:
klimtwifi # Samsung T700
klimtlte # Samsung T705
chagallwifi # Samsung T800
chagalllte # Samsung T805
chagallltetmo # Samsung T807T
ha3g # Samsung Note3 (N900)
Step 1: Setting Up A Compile Environment
You must have a 64-bit environment.
A Linux computer should have 8 GB RAM or more, otherwise build errors may occur.
Ubuntu 16.04
These instructions should work for other version of Ubuntu and most other Debian-based systems.
Install build packages
Open a terminal (ctrl + alt + t). First install the necessary packages; copy paste the code below and hit enter.
HTML:
sudo apt-get update
sudo apt-get install git ccache automake lzop bison gperf build-essential zip curl zlib1g-dev zlib1g-dev:i386 g++-multilib python-networkx libxml2-utils bzip2 libbz2-dev libbz2-1.0 libghc-bzlib-dev squashfs-tools pngcrush schedtool dpkg-dev liblz4-tool make optipng maven bc pngquant imagemagick yasm libssl-dev
sudo apt-get install openjdk-8-jdk
HTML:
mkdir -p ~/bin
mkdir -p ~/mokee
curl https://storage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
chmod a+x ~/bin/repo
Add bin to PATH
HTML:
echo "export PATH=~/bin:$PATH" >> ~/.bashrc
Configure git:
HTML:
git config --global user.email "[email protected]"
git config --global user.name "Your Name"
Move to build directory and sync the source code:
HTML:
cd ~/mokee
repo init -u https://github.com/Cyborg2017/android_mokee.git -b mokee-7.1.2
repo sync -j8 -f --no-clone-bundle
Let's configure ccache too. It will reduce the build time to 40% after first build
HTML:
echo "export USE_CCACHE=1" >> ~/.bashrc
~/mokee/prebuilts/misc/linux-x86/ccache/ccache -M 25G
25G means it will use upto 25 gb of disk space for ccaching. Atleast 10 gb is recommended. But if you want to compile for more devices, use more space for ccache.
Step 2: Compiling For Your Device
# MoKee Rom For Samsung Exynos5420 Chips Device
============================================================
To initialize your local repository using the MoKee trees, use a command like this:
HTML:
repo init -u https://github.com/Cyborg2017/android_mokee.git -b mokee-7.1.2
Then to sync up:
HTML:
repo sync
Start Work
-------------------------------------------------------------
To work faster, we introduced a new build script to help you start compiling.
First, go to the root path of your project. We assume that your source is under
(/mokee):
HTML:
cd /mokee
then feel free to use the build script:
HTML:
. build/envsetup.sh
lunch mk_klimtwifi # T700
lunch mk_klimtlte # T705
lunch mk_chagallwifi # T800
lunch mk_chagalllte # T805
lunch mk_chagallltetmo # T807T
lunch mk_ha3g # N900
mka bacon -j8
The script is interactive so everything else is self-explanatory.
Source:
https://github.com/Cyborg2017/android_mokee
https://github.com/Cyborg2017/android_device_samsung_exynos5420-common
https://github.com/Cyborg2017/android_device_samsung_chagalllte
https://github.com/Cyborg2017/android_device_samsung_chagallwifi
https://github.com/Cyborg2017/android_device_samsung_klimtlte
https://github.com/Cyborg2017/android_device_samsung_klimtwifi
https://github.com/Cyborg2017/android_device_samsung_chagallltetmo
https://github.com/Cyborg2017/android_device_samsung_ha3g
https://github.com/Cyborg2017/android_kernel_samsung_exynos5420
Thanks:
MoKee Rom Team: https://github.com/MoKee
Exynos5420 Team: https://github.com/exynos5420
LineageOs Team: https://github.com/LineageOS
This ROM: https://forum.xda-developers.com/t/rom-130-official-lavender-crdroid-v9-0-26-11-2022.4523341/
Kernel：https://github.com/crdroidandroid/android_kernel_xiaomi_lavender
I want to install termux on my redmi note7 to run Docker, but I have many problems when compiling this kernel. Can you help me compile it?
GitHub - MiCode/Xiaomi_Kernel_OpenSource at lavender-q-oss
Xiaomi Mobile Phone Kernel OpenSource. Contribute to MiCode/Xiaomi_Kernel_OpenSource development by creating an account on GitHub.
github.com
This kernel can also
Hi!
I created a docker image to build this kernel, and you just need a few simple steps:
1., create the docker image
2., run the docker image
3., clone the kernel sources
4., patch the build.sh to not to interfere with some CI stuff (not mandatory)
Click to expand...
Click to collapse
5., run build.sh
Click to expand...
Click to collapse
Once it the build is completed, the flashable kernel zip is in the AnyKernel3 dir.
In details:
create the docker image using the Dockerfile:
FROM ubuntu:20.04
RUN echo 'deb http://cz.archive.ubuntu.com/ubuntu jammy main' >> /etc/apt/sources.list
RUN apt update && apt install openssh-server sudo -y
RUN apt install vim telnet -y
RUN apt install git build-essential gcc-arm-linux-gnueabihf gcc-aarch64-linux-gnu libstdc++6 bc zip libssl-dev -y
RUN useradd -rm -d /home/ubuntu -s /bin/bash -g root -G sudo -u 1000 build
RUN echo 'build:build' | chpasswd
RUN service ssh start
EXPOSE 22
CMD ["/usr/sbin/sshd","-D"]
Click to expand...
Click to collapse
Build the docker image:
docker build -t builder:1.0 .
Click to expand...
Click to collapse
Run the image:
docker run -d --name kernel-builder -p 2022:22 builder:1.0
Click to expand...
Click to collapse
git clone https://github.com/crdroidandroid/android_kernel_xiaomi_lavender
cd android_kernel_xiaomi_lavender
git apply build.patch
./build.sh