This is a guide to build your own CM7 on Mac OSX Lion. I can't guarantee 100% that this will work for everyone, but it worked for me. I want to thank Paul from Modaco, CyanogenMod team, Batista Harahap, ahbeng, and anyone else I can't remember atm.
1. Download and install Xcode, Java Mac OS X 10.5 SDK (later versions don't seem to work)
2. I recommend uninstalling existing MacPorts (using the codes below) and then install a fresh copy just to be safe.
Code:
$ sudo port -fp uninstall --follow-dependents installed
$ sudo rm -rf /opt/local /Applications/DarwinPorts /Applications/MacPorts /Library/LaunchDaemons/org.macports.* /Library/Receipts/DarwinPorts*.pkg /Library/Receipts/MacPorts*.pkg /Library/StartupItems/DarwinPortsStartup /Library/Tcl/darwinports1.0 /Library/Tcl/macports1.0 ~/.macports
3. Follow these steps below to teleport String errors at compile time
Code:
$ sudo vi /opt/local/etc/macports/sources.conf
* press ]]
* press i
* Append # at the beginning of the line
* Press Enter
* Add the following lines
Code:
file:///Users/Shared/dports
rsync://rsync.macports.org/release/ports/
* Press Esc
* Type :wq and press enter
4. Update Macports and install the necessary packages and revert gmake to 3.81 (This takes a long time)
Code:
$ sudo port selfupdate
$ POSIXLY_CORRECT=1 sudo port install gmake libsdl git-core gnupg e2fsprogs gsed curl libiptcdata xorg-libX* pngcrush findutils
$ sudo ln -s /opt/local/bin/gsed /opt/local/bin/sed
$ sudo ln -s /opt/local/libexec/gnubin/find /opt/local/bin/find
$ vi /opt/local/etc/macports/sources.conf
$ mkdir /Users/Shared/dports
$ cd /Users/Shared/dports
$ svn co --revision 50980 http://svn.macports.org/repository/macports/trunk/dports/devel/gmake/ devel/gmake/
$ portindex /Users/Shared/dports
$ sudo port install gmake @3.81
5. comment a line in one of Darwin’s C Library to get rid of compile time errors
Code:
$ sudo vi /usr/include/string.h
* Press :143
* Press i
* Append //
* Press Esc
* Type :wq!
* Press enter
6. Add a symlink for 10.5 SDKs
Code:
$ sudo ln -s /Developer/SDKs/MacOSX10.6.sdk /Developer/SDKs/MacOSX10.5.sdk
7. Create a sparseimage with a Case Sensitive FS
a. Open the Disk Utility (/Applications/Utilities/Disk Utility.app).
b. Click on New Image.
c. Save as "cyanogenmod.sparseimage" and set the following parameters as followed:
d. Name: "cyanogenmod"
e. Size: 15 GB is minimum recommended (A sparseimage will save unused space)
f. Format: Mac OS Extended (CASE-SENSITIVE, Journaled)
g. Encryption: none, Partition- Single Apple Partition Map
h. Image Format: Sparse Disk Image (this will save you disk space)
i. Save this wherever you like, and then double-click the sparseimage file to mount.
j. Your workspace will be: /Volumes/cyanogenmod/
8. Macports version of e2fsprogs will fail to compile, download the source and compile it yourself
Code:
$ mkdir -p ~/src
$ cd ~/src
$ git clone http://git.kernel.org/pub/scm/fs/ext2/e2fsprogs.git
$ cd e2fsprogs
$ ./configure --prefix=/opt/local
$ make -j4 && sudo make install
9. Set up the pre-requisites for CyanogenMod to compile, there are
Code:
$ cd /Volumes/cyanogenMod
$ mkdir -p bin
$ curl https://dl-ssl.google.com/dl/googlesource/git-repo/repo > bin/repo
$ chmod a+x bin/repo
$ mkdir -p android/system/
$ PATH=${PATH}:/Volumes/cyanogenmod/bin:
$ echo "PATH=\${PATH}:/Volumes/cyanogenmod/bin:" >> ~/.profile
10. Clone CyanogenMod repository into our sparse image (This takes a long time)
Code:
$ cd /Volumes/cyanogenmod/android/system
$ repo init -u git://github.com/CyanogenMod/android.git -b gingerbread
$ repo sync
11. Now to get all closed source binaries from the device and into our device build folder (replace *company* and *model* with the device you want e.g. /lge/p990)
Code:
$ cd /Volumes/cyanogenmod/android/system/device/*company*/*model*
$ ./extract-files.sh
12. ROMManager is a requirement for CyanogenMod
Code:
$ /Volumes/cyanogenmod/android/system/vendor/cyanogen/get-rommanager
13. edit cm source to make it compile on lion
Add lines in red to android/system/external/elfutils/config-compat-darwin.h:
Code:
[COLOR="Red"]#if __ENVIRONMENT_MAC_OS_X_VERSION_MIN_REQUIRED__ < 1070
[/COLOR]
static inline size_t strnlen (const char *__string, size_t __maxlen)
{
int len = 0;
while (__maxlen-- && *__string++)
len++;
return len;
}
[COLOR="red"]#endif[/COLOR]
Comment out every line in android/system/external/qemu/Android.mk:
Code:
# the following test is made to detect that we were called
# through the 'm' or 'mm' build commands. if not, we use the
# standard QEMU Makefile
#
#ifeq ($(DEFAULT_GOAL),droid)
# LOCAL_PATH:= $(call my-dir)
# include $(LOCAL_PATH)/Makefile.android
#else
# include Makefile.qemu
#endif
14. Now here comes the real fun, let’s compile CyanogenMod. (replace *model* with the device you want e.g. cyanogen_p990)
Code:
$ cd /Volumes/gingerbread/android/system/
$ cp ./vendor/cyanogen/products/cyanogen_*model*.mk ./buildspec.mk
$ . build/envsetup.sh
$ lunch cyanogen_*model*-eng
$ make -j`sysctl -an hw.logicalcpu` bacon
If the build was successful, there should be an update-cm-X.X.X-RC0-KANG-signed.zip in the /android/system/out/target/product/*model* folder.
If you were successful, go get yourself a treat.
Related
Please not that i don't take credits for this tutorial its dastin1015 who made this! but as many people don't look in other forums except the forum for their devices i would like to give you the info here about how to build JB from source
Original Thread;Here=)
dastin1015 said:
To compile Jellybean on Ubuntu I'm going to first give you steps to set up your computer to get this thing rolling. Also note that this appears to be a development preview source code.
This will NOT make a fully functional ROM, but will give you a place to start. Also I CANNOT fix every error you run into.
Note: The source download is approximately 6GB in size. You will need 25GB free to complete a single build, and up to 80GB (or more) for a full set of builds.
1) You need the following:
-JDK 6 if you wish to build Jellybean. You can download it from java.sun.com. Or:
Code:
$ sudo add-apt-repository "deb http://archive.canonical.com/ lucid partner"
$ sudo apt-get update
$ sudo apt-get install sun-java6-jdk
-Python 2.4 -- 2.7, which you can download from python.org. Or:
Code:
$ sudo apt-get install python
-Git 1.7 or newer. You can find it at git-scm.com. Or:
Code:
$ sudo apt-get install git-core
-Android SDK:
Download the SDK here: http://developer.android.com/sdk/index.html
Extract the SDK and place it in your home directory.
I renamed my SDK to android-sdk to make it easier to navigate to.
Go to your home folder, press Ctrl+H to show hidden files, and open up your .bashrc file.
Add these lines at the bottom of the file:
Code:
# Android tools
export PATH=${PATH}:~/android-sdk/tools
export PATH=${PATH}:~/android-sdk/platform-tools
export PATH=${PATH}:~/bin
Find your .profile file and add this at the bottom of the file:
Code:
PATH="$HOME/android-sdk/tools:$HOME/android-sdk/platform-tools:$PATH"
You have now successfully installed the Android SDK.
To check for updates issue this into your terminal:
Code:
$ android
2) Install required packages. 64-bit (recommended)
Code:
$ sudo apt-get install git-core gnupg flex bison gperf build-essential \
zip curl zlib1g-dev libc6-dev lib32ncurses5-dev ia32-libs \
x11proto-core-dev libx11-dev lib32readline5-dev lib32z-dev \
libgl1-mesa-dev g++-multilib mingw32 tofrodos python-markdown \
libxml2-utils
On newer versions of Ubuntu such as 11.10 you may need to do the following:
Code:
$ sudo ln -s /usr/lib/i386-linux-gnu/libX11.so.6 /usr/lib/i386-linux-gnu/libX11.so
Building on Ubuntu 12.04 is currently only experimentally supported and is not guaranteed to work on branches other than master.
Code:
$ sudo apt-get install git-core gnupg flex bison gperf build-essential \
zip curl libc6-dev libncurses5-dev:i386 x11proto-core-dev \
libx11-dev:i386 libreadline6-dev:i386 libgl1-mesa-glx:i386 \
libgl1-mesa-dev g++-multilib mingw32 openjdk-6-jdk tofrodos \
python-markdown libxml2-utils xsltproc zlib1g-dev:i386
$ sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1 /usr/lib/i386-linux-gnu/libGL.so
3) Configure your USB.
Code:
$ gksudo gedit /etc/udev/rules.d/51-android.rules
Inside of this blank text file insert:
Code:
#Acer
SUBSYSTEM=="usb", ATTR{idVendor}=="0502", MODE="0666"
#Samsung
SUBSYSTEM=="usb", ATTR{idVendor}=="04e8", MODE="0666"
4) Save the file and close it and then issue this command: [CODE]$ sudo chmod a+r /etc/udev/rules.d/51-android.rules
5) Install the repo:
Code:
$ mkdir ~/bin
$ PATH=~/bin:$PATH
$ curl https://dl-ssl.google.com/dl/googlesource/git-repo/repo > ~/bin/repo
$ chmod a+x ~/bin/repo
6) Initialize the repo:
Code:
$ mkdir WORKING_DIRECTORY
$ cd WORKING_DIRECTORY
$ repo init -u https://android.googlesource.com/platform/manifest -b android-4.1.1_r1
6.1) For people who have already done a repo init:
Code:
$ cd WORKING_DIRECTORY
$ repo init -b android-4.1.1_r1
$ repo sync
7) When prompted, enter your real name and email address.
8) Gather the files: [CODE]$ repo sync
9) Compiling:
Code:
$ source build/envsetup.sh
Or:
Code:
$ . build/envsetup.sh
10) Issue:
Code:
$ lunch
11) Pick your poison.
12) Now issue (The '#' is the number of cores your processor has plus 1, ex. I have a dual core processor so I type 'make -j3':
Code:
$ make -j#
~How To Add A Device To The List~
1) Find the github for your device you wish to add. (For me it is the HTC Evo 3D CDMA)
2) Now navigate to the location you are going clone the device tree to:
Code:
$ cd WORKING_DIRECTORY/device
$ mkdir samsung
3) Clone the github device tree from remote to local: (The shooter would be whatever you want that folder to be named so make sure it is whatever standard name would be for your device, example: Nexus One [passion], Nexus S [crespo], Motorola Droid [sholes], HTC Incredible [inc], etc.)
Code:
$ git clone git://github.com/CyanogenMod/android_device_htc_shooter.git shooter
4) Now navigate into the folder:
Code:
$ cd shooter
5) Connect phone to computer and make sure USB debugging is enabled and you have adb set up.
6) Extract Device Proprietary Files:
Code:
$ ./extract-files.sh
7) Navigate back to your home directory for building:
Code:
$ cd ~/WORKING_DIRECTORY
8) Prepare To Compile:
Code:
$ source build/envsetup.sh
Or:
Code:
$ . build/envsetup.sh
9) Get your list of devices:
Code:
$ lunch
10) Pick your poison.
11) Now compile:
Code:
$ make -j#
Or for a flashable zip:
Code:
$ make -j# otapackage
~NOTE~
If you are running into issues such as:
Code:
Which would you like? [full-eng] 5
build/core/product_config.mk:209: *** No matches for product "full_shooter". Stop.
Device shooter not found. Attempting to retrieve device repository from CyanogenMod Github (http://github.com/CyanogenMod).
Repository for shooter not found in the CyanogenMod Github repository list. If this is in error, you may need to manually add it to your local_manifest.xml.
build/core/product_config.mk:209: *** No matches for product "full_shooter". Stop.
** Don't have a product spec for: 'full_shooter'
** Do you have the right repo manifest?
What you need to do is to edit your blob to match the PRODUCT_NAME to the file name. For example with mine I have full_shooter.mk therefore in this file I need to have PRODUCT_NAME to match it. Whatever error it is looking for you just need to change the PRODUCT_NAME line to match what the error shows.
Click to expand...
Click to collapse
reserved for Q/A
It's frowned upon to re-distribute threads across multiple forums, trust me it wasn't allowed for a thread compiled by RC's so the same will go for this and any other thread especially one that was published on the portal as has been made aware to alot of people. Regardless of them reading other forums its clear to see thanks to the new 2013 theme having the new sidebar with top stories where I saw it earlier today. Just a heads up
AvRS said:
It's frowned upon to re-distribute threads across multiple forums, trust me it wasn't allowed for a thread compiled by RC's so the same will go for this and any other thread especially one that was published on the portal as has been made aware to alot of people. Regardless of them reading other forums its clear to see thanks to the new 2013 theme having the new sidebar with top stories where I saw it earlier today. Just a heads up
Click to expand...
Click to collapse
theres alot of people like me who never goes to the porta, dunno why tough
LastStandingDroid said:
theres alot of people like me who never goes to the porta, dunno why tough
Click to expand...
Click to collapse
Either way if it's already posted somewhere it's not advised to repeat the information in device specific forums as it's not device specific and why it's been put in a general section.
Yeah, listen to AvRS, you can face some warnings because it counts as duplicate thread spam. Calling a mod here to decide. Thanks! :good:
protomanez said:
Yeah, listen to AvRS, you can face some warnings because it counts as duplicate thread spam. Calling a mod here to decide. Thanks! :good:
Click to expand...
Click to collapse
thats amazing i never heard of it,
ill make this as much as possible for the SII
Thread closed
AvRS said:
Either way if it's already posted somewhere it's not advised to repeat the information in device specific forums as it's not device specific and why it's been put in a general section.
Click to expand...
Click to collapse
protomanez said:
Yeah, listen to AvRS, you can face some warnings because it counts as duplicate thread spam. Calling a mod here to decide. Thanks! :good:
Click to expand...
Click to collapse
LastStandingDroid said:
thats amazing i never heard of it,
ill make this as much as possible for the SII
Click to expand...
Click to collapse
And the mod has decided, as stated above, the thread is in General for a reason, it's applicable across phones.
I have yet to see a good, COMPLETE, step by step tutorial for building firefoxOS, so since I figured it out thought I would document the steps I took and get a good guide going for us.
**This guide is written with Samsung Nexus S 4G (crespo4G) specifically in mind, but it can easily be adapted to any officially supported device
what you will need:
a nexus s 4g (or other officially supported device)
a pc capable of compiling android from source (ie: minimum 2x core cpu, 4gb ram)
ubuntu 12.10 or 13.04 64-bit (google it, it's open source!)
broadband internet (trust me, you want a minimum of 10mbit/sec)
a basic understanding of terminal command, adb and fastboot
ok, let's get started!!
I'll assume you've already installed ubuntu and gotten the network set up. If not, do so now.
First, set up the build environment....
Install java:
Code:
$ sudo add-apt-repository "deb http://archive.canonical.com/ lucid partner"
Code:
$ sudo apt-get update
Code:
$ sudo apt-get install sun-java6-jdk
If you have multiple java installations you need to change the version your system is using
Code:
$ wget http://webupd8.googlecode.com/files/update-java-0.5b
Code:
$ chmod +x update-java-0.5b
Code:
$ sudo ./update-java-0.5b
(it says java 0.5, but it's java 6 don't worry)
choose any java 6 installation and save.
Install android sdk:
download the sdk from android dev site
http://developer.android.com/sdk/index.html
extract it to ~/android/sdk/.....
Code:
$ cd ~/android/sdk/tools
Code:
$ ./android update sdk
update all packages
Install adb & fastboot:
Code:
$ sudo add-apt-repository ppa:nilarimogard/webupd8
Code:
$ sudo apt-get update
Code:
$ sudo apt-get install android-tools-adb android-tools-fastboot
test it!!!
Code:
$ adb devices
Install dependancies:
ubuntu 12.10+ dependancies
Code:
$ sudo apt-get install autoconf2.13 bison bzip2 ccache curl flex gawk gcc g++ g++-multilib gcc-4.6 g++-4.6 g++-4.6-multilib git ia32-libs lib32ncurses5-dev lib32z1-dev libgl1-mesa-dev libx11-dev make
64 bit dependancies
Code:
$ sudo ln -s /usr/lib/i386-linux-gnu/libX11.so.6 /usr/lib/i386-linux-gnu/libX11.so
Code:
$ sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1 /usr/lib/i386-linux-gnu/libGL.so
Clone the repo:
Code:
$ git clone git://github.com/mozilla-b2g/B2G.git
Code:
$ cd ~/B2G
Download the source:
Plug in your device, ensure ICS or newer is installed, then enable usb debugging
Code:
$ ./config.sh nexus-s-4g
This is where you can change the guide to work with any supported device. The proper syntax is as follows
Code:
$ ./config.sh (device name)
where (device name) is one of the following:
- galaxy-s2
- galaxy-nexus
- nexus-s
- nexus-s-4g
- otoro
- unagi
- pandaboard
- emulator
- emulator-x86
This takes about an hour
When the source is done downloading, create a file called .userconfig with gedit containing the following two lines of code then save and drop it in ~/B2G
export CC=gcc-4.6
export CXX=g++-4.6
Building from source:
if you're not already there
Code:
$ cd ~/B2G
Code:
$ ./build.sh
*if you get build errors, use a -j option. -j1 option tells your pc to use only one cpu core. -j2 tells it to use 2, and so on...
Using less cpu cores can lead to a more stable build environment and reduce errors
If you use a -j1 option, the syntax is as follows:
Code:
$ ./build.sh -j1
This takes HOURS (probably 4-5)
Flashing b2g:
when it's done, find the .img files in ~/B2G/out/product/target/crespo4g
Code:
$ cd ~/B2G/out/product/target/crespo4g
Boot your device to the bootloader
Code:
$ sudo fastboot flash boot boot.img
Code:
$ sudo fastboot flash system system.img
Code:
$ sudo fastboot flash userdata userdata.img
To create a flashable zip:
plug in your device and enable usb debugging
Code:
$ sudo adb pull /system ~/Documents/crespo4g/b2g
Code:
$ sudo adb pull /data ~/Documents/crespo4g/b2g
add the meta-inf from another nexus s 4g flashable zip
create a .zip with the 3 directories (meta-inf, system and data) and the boot.img you just created
flash in recovery after a FULL wipe (system, boot, data, cache, dalvik)
reserved
Reserved again
Thanks ! Will try this !
Sent from my Nexus s using xda app-developers app
Big Thx Good Guide
This will guide you thought the setup of Mint. The setup of your build environment, and finely the output of a flashable CMB ROM for your 700
First anything that starts with a bullet point is just for your reference.. Do not copy these things into your bash window...
Anything that is a code is copied one line at a time into your bash window and than enter
Now Install Mint 64 bit and a PC.. We will need at least a 250 GB hard drive...
This is a work in progress so let me know if anyone has any questions...
You can Find Mint here Click Me
Update System
Code:
sudo apt-get update
Code:
sudo apt-get upgrade
Build Env
Code:
sudo apt-get install git-core gnupg flex bison gperf libsdl1.2-dev libesd0-dev libwxgtk2.8-dev squashfs-tools build-essential zip curl
Code:
sudo apt-get install libncurses5-dev zlib1g-dev pngcrush schedtool libxml2 libxml2-utils xsltproc android-tools-fastboot android-tools-adb
Code:
sudo apt-get install g++-multilib lib32z1-dev lib32ncurses5-dev lib32readline-gplv2-dev gcc-multilib meld ia32-libs lzop ccache gedit
Code:
mkdir -p ~/bin
Code:
mkdir -p ~/android/system
Code:
curl http://commondatastorage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
Code:
chmod a+x ~/bin/repo
Code:
export PATH=${PATH}:~/bin
Code:
gedit ~/.bashrc
Copy & Paste at bottom of bashrc on its own line
Code:
export PATH=${PATH}:~/bin
END-Paste
Code:
cd ~/android/system/
Code:
repo init -u git://github.com/cmbroms/platform_manifest.git -b kk4.4
You will be prompt to give your email and name just follow the steps on screen
Prepare to wait for a massive download 3 to 10 hours depending on your internet speed...
Code:
repo sync
Code:
cd ~/android/system/vendor/cmb
Code:
./get-prebuilts
Java
Code:
su
Code:
echo "deb http://ppa.launchpad.net/webupd8team/java/ubuntu precise main" | tee -a /etc/apt/sources.list
Code:
echo "deb-src http://ppa.launchpad.net/webupd8team/java/ubuntu precise main" | tee -a /etc/apt/sources.list
Code:
apt-key adv --keyserver keyserver.ubuntu.com --recv-keys EEA14886
Code:
apt-get update
Code:
apt-get install oracle-java6-installer
Code:
exit
Code:
sudo apt-get install oracle-java6-set-default
Ccache
Code:
gedit ~/.bashrc
Copy & Paste at bottom of bashrc on its own line
Code:
export USE_CCACHE=1
Code:
export CCACHE_DIR=~/ccache
END-Paste
Code:
source ~/.bashrc
Code:
ccache -M 50G
Building a ROM
Code:
cd ~/android/system
Make sure your in sync with the repo, you will do this every time right before you build.
Code:
repo sync
Code:
source build/envsetup.sh
Code:
lunch
Pick the number of the rom you would like to build
I maintain the 700,300,m7vzw so those are the only ones I can help with
the -j* is how may cpu cores you would like to give to the build process
So -j2 would tell the build process that you have 2 core you would like to use to build
Code:
make clean && make bacon -j2
The flash-able zip will be in the out folder of your build directory
Code:
XDA:DevDB Information
How to build CMB ROM for your TF300T, a Tool/Utility for the Asus Transformer TF300T
Contributors
lj50036
Version Information
Status: Testing
Created 2014-01-17
Last Updated 2014-01-17
Sources
CMB github Click Me
ASOP Click Me
CM wiki Click Me
Java Click Me
Reserved
Download Tab
I posted a downloadable .txt file, so you don't have to have a browser open, for the process.. The download is available in the download tab at the top of every page of this forum... Thx as always lj
Miui 8 patch rom release, can someone port it for Nexus 4?
https://github.com/MiCode/patchrom/tree/marshmallow
I need it too...
You should contact to miui support forum or XDA devs, I hope they can build miui 8 for nexus 4
@Trickster22
Install Ubuntu.
Install Java
Guide to configure android SDK
Guide to configure repository:
Open terminal
Code:
mkdir -p ~/bin
Code:
PATH=~/bin:$PATH
Code:
cd ~/bin
Code:
curl https://storage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
Code:
chmod a+x ~/bin/repo
Code:
mkdir ~/patchrom
Code:
cd ~/patchrom
Code:
repo init -u git://github.com/MiCode/patchrom.git -b marshmallow
Now you'll have to configure git. Run following commands in terminal
Code:
git config --global user.email ENTER_YOUR_EMAIL_ID_HERE
Code:
git config --global user.name ENTER_YOUR_REAL_NAME_HERE
Code:
repo init -u git://github.com/MiCode/patchrom.git -b marshmallow
Code:
repo sync
Wait......
after, Install the latest version of Fake nexus (marshmallow), reboot to device in mode recovery (TWRP).
PS.: After you finish generating the stockrom.zip of fake nexus, do the same for cm-13.0-20160820-SNAPSHOT-ZNH5YAO0J5-mako.zip
Reboot your device for recovery, use this comand to gerate stockrom.zip and metadata folder:
Code:
/home/"YOUR-USER-NAME-UBUNTU"/patchrom/tools/releasetools/ota_target_from_phone -r
Sende me stockrom.zip and metadata folder
Source: http://forum.xda-developers.com/android/software/guide-build-port-miui-rom-to-device-t3250984
Dio_S said:
@Trickster22
Install Ubuntu.
Install Java
Guide to configure android SDK
Guide to configure repository:
Open terminal
Code:
mkdir -p ~/bin
Code:
PATH=~/bin:$PATH
Code:
cd ~/bin
Code:
curl https://storage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
Code:
chmod a+x ~/bin/repo
Code:
mkdir ~/patchrom
Code:
cd ~/patchrom
Code:
repo init -u git://github.com/MiCode/patchrom.git -b marshmallow
Now you'll have to configure git. Run following commands in terminal
Code:
git config --global user.email ENTER_YOUR_EMAIL_ID_HERE
Code:
git config --global user.name ENTER_YOUR_REAL_NAME_HERE
Code:
repo init -u git://github.com/MiCode/patchrom.git -b marshmallow
Code:
repo sync
Wait......
after, Install the latest version of Fake nexus (marshmallow), reboot to device in mode recovery (TWRP).
PS.: After you finish generating the stockrom.zip of fake nexus, do the same for cm-13.0-20160820-SNAPSHOT-ZNH5YAO0J5-mako.zip
use this comand to gerate stockrom.zip and metadata folder:
Code:
/home/"YOUR-USER-NAME-UBUNTU"/patchrom/tools/releasetools/ota_target_from_phone -r
Sende me stockrom.zip and metadata folder
Source: http://forum.xda-developers.com/android/software/guide-build-port-miui-rom-to-device-t3250984
Click to expand...
Click to collapse
Thank you sir for this valuable info/guide but I have a weak machine for Ubuntu like only 2 GB ram. This is why I was requesting others to build miui.
Trickster22 said:
Thank you sir for this valuable info/guide but I have a weak machine for Ubuntu like only 2 GB ram. This is why I was requesting others to build miui.
Click to expand...
Click to collapse
You should just generate the stockrom.zip + metadata and send me, I can do it, because I do not have the device
what ıs thıs ?
hasanben35 said:
what ıs thıs ?
Click to expand...
Click to collapse
For me to compile miui, I need the stockrom.zip plus the metadata folder generated by the patchrom, this guide shows how.
Sorry mt english
hım how long does it take
hasanben35 said:
hım how long does it take
Click to expand...
Click to collapse
This process should take around 1 hour if you already have Ubuntu installed and configured
multı rom nıtrogen os 7.1.1 and flyme ınstalled flyme remove ubuntu ınstall after _?
hasanben35 said:
mult? rom n?trogen os 7.1.1 and flyme ?nstalled flyme remove ubuntu ?nstall after _?
Click to expand...
Click to collapse
Ubuntu in PC "Desktop"
oh my god no no no waıtıng rom sorry ubuntu ınstall pc no
Okay, I'll make those files. Where should I send it?
I try to compile kernel for Samsung SM-A510F. I got source from Samsung Open source.
My steps:
1.Create folder in home directory and extract kernel.tar.gz there.
2.Create another folder in home directory and download compiler
$ mkdir bin
$ cd bin
$ git clone https://android.googlesource.com/platform/prebuilts/gcc/linux-x86/aarch64/aarch64-linux-android-4.9
3.
$ cd aarch64-linux-android-4.9
$ export SUBARCH=arm64
$ export ARCH=arm64
$ export CROSS_COMPILE=~/bin/aarch64-linux-android-4.9/bin/aarch64-linux-android-
4.
make menuconfig. Save default settings just to make .config file
5.
In kernel folder
$ make clean
$ make mrproper
$ make ARCH=arm64 exynos7580-a5xelte_defconfig
$ make -j 8
I received compiler patch error and other errors. Maybe I used wrong guide? Please, point me to right direction!
.