Database Users

[Q] Very Odd installed appz after update <BRICKED>

Hoi Hoi people
i got myself a GT540 Optimus <yes total newbeee to android>
It came with a deal for free and its my 1st android :0
anyway
After USING the official way (silly me )to update I now have some odd Portuguese apps installed ? Stuff from SAPO.pt ???
I didn't do any Sync backup as i just got the phone and its basically empty
I used the Updater tool from LG connected and all went well But after I look I was able to change the language to ENG but it has quiet a few Portuguese Apps installed...
I am in Holland so i cannot see how this updater decided to give me a POR image ?
Now i could make a guess and say the IMEI is for Portuguese market(?) and the dutch INTERNET cheapo middleman I got the deal from has bought a bunch on the gray market ..
Whatever it is i don't care
I would like you guys now to point me the right way
I just flash the thing myself
I think the tool i need is called KDZ ?
Please someone point me to the right post I am looking but seem to get nowhere
just more confused
Thanks guys
B.T.W I am not too inept . I am used to flashin me HTC HD all the time ..

Follow the thread: http://forum.xda-developers.com/showthread.php?t=802895
to update to v2.1 Eclair.
or
follow
http://forum.xda-developers.com/showthread.php?t=857213
to update to Quarx's OpenSwift project v2.2.1.
Make sure you read the instructions very carefully.

Toen je de officele lg updater gebruikte, welke taal was hij toen?
Het kan zijn dat je dat aan het begin verkeerd heb ingesteld.
Joost

Thanks a lot guys
I followed the hints and now my LG is dead ..
LOL
This is rather annoying
1st I get a Crap gray import from 2call
then LG puts a Portuguese update rom on it??WTF!>?
while i choose NETHERLANDS with language english
but nevermind
buy **** buy twice thats life
My 1st and last lg phone ?/
What kind of rubbish is this
u update using the official LG tool and they play a freckin foreign rom onto my LG (SAPO.PT) then I cant update it at all anymore using the tool . So i look for alternatives but thats just made it worse ...
Really really poor this ..
Now ...I followed the guide but it didn't work ..well it did until restarted
My lg is now black. Dead ! doesn't start up at all !
Doesn't start no-matter what i try !
not even emergency mode.
And no guys I read the instruction word for word !!!!
I followed it to the letter !!!!! and the update did work ..Just now it doesn't start at all anymore.
I should of known reading around
there are too many update ways people are doing this ..Hack tool or original KDZ ..or just Black system way ..Too many loopholes for things to go wrong ..but now too late

Hmm...
Try a reflash...
This is a guide I followed from another forum, and posted elsewhere with some minor additions in case anyone had problems.
The guide is from a forum post at the android forums,it is NOT my work, the added bits are mostly what I have found from browsing here and from asking questions. While I can't be held liable if you mess your phone up having done so myself I thought this could helpa few people and save them searching various threads for answers so hope it helps
The guide
To install this ROM you need to have fastboot enabled on your phone. If you have Android 1.6/2.1 installed from LG, then fastboot is not enabled. I will explain how to enable fastboot on your phone (this involves re-flashing/replacing your currently installed firmware):
I am unable to post links yet so you will have to copy and paste the appropriate link into your browser replacing the ** with tt
KDZ Updater Carphone Warehouse Unlocked.zip can be downloaded at h**p://goo.gl/7aRTc - A link to a zip archive with all the files needed to flash to Android version 2.1 with fastboot (Carphone Warehouse Unlocked)
KDZ Updater Europe Open.zip can be downloaded at h**p://goo.gl/BOcYT - A link to a zip archive with all the files needed to flash toAndroid version 2.1 with fastboot (Europe Open)
Download the version that best applies to you, if you live in the UK, I'd recommend you download the Carphone Warehouse Unlocked version, whereas if you live in Europe, I'd recommend the Europe Open version (simple right? )
I live in the UK and used the open rom from Europe as the Carphone Warehouse rom would not install
Now, how to flash these versions; I'll explain in detail how to flash the ROM's from starting with backing up.
Instructions to install ROM with Fastboot:
1. Before you start, make sure you backup all your data by installing the z4root.1.3.0.apk file onto your phone, then open it and choose 'Permanent Root'. Your phone will root and reboot. Then go to the Market and install 'MyBackup Root', open it and do a backup of your apps and personal data (contacts, sms, call log etc.) Once this is done, go to Settings>SD Card and Phone Storage>Unmount SD Card, a notification in the notification bar should appear saying 'SD Card safe to remove'. Remove the battery cover and remove the SD card and store it in a safe place. Then continue to step 2.
2. Extract the .zip file you downloaded to your computer (e.g. your desktop). Open the folder and install MSXML 4.0 SP3 Parser (msxml.msi).
3. Once that has finished, install LGAndroidDriver_WHQL_ML_Ver1.0_All_Win7.exe which are the drivers so your computer will recognize your phone.
4. Next, open KDZ_FW_UPD.exe
(i) Change 'Type' to '3GQCT' *THIS IS A MUST, THE UPDATE WILL NOT WORK OTHERWISE AND YOU MAY BRICK YOUR PHONE*
(ii) Make sure 'PhoneMode' is set to 'DIAG'
(iii) Browse for the 'V20B_00+Fastboot.kdz' file.
5. Prepare the phone by enabling USB Debugging by going to Settings>Applications>Development>Enable USB Debugging and connect the phone to the computer via USB cable and wait for the drivers to install for the phone.
6. Click 'Launch software update' and do not use your computer until the update is complete. The update will take roughly 10-20 mins to complete.
If you have a problem with this try a different rom, this guide offers two to choose from.
Instructions to install CyanogenMod:
Once the update is complete, your phone will reboot, what you need to do is power off the phone and whilst the phone is off, press and hold the 'Camera' button all the way ANDpower on the phone, make sure you hold the 'Camera' button. The phone will display the LG logo and disappear, then display a blank screen. The phone is now in fastboot mode!
Now you want to download this file: Flashing CyanogenMod.zip and extract it to a folder called 'Android' (without the quotes '') on the C: drive (you'll probably need to make this folder yourself.
1. Now open CMD with administrator privileges (Search for CMD in the start menu and right click on 'cmd' and click 'Run as Administrator' )
2. Connect the phone to your computer via USB cable and wait for the necessary drivers to install.
If when connected with a usb cable the computer says "waiting for device" and nothing else happens try installing the fastboot drivers. You can do this by going to the control panel of your pc, from the Windows start menu, opening the list of devices and where you see the one representing your phone (likely, as was the case with me, it will say android and have a yellow exclamation mark over it). Different versions of Windows do things slightly different but what you need to do is simply update the driver by choosing the icons properties box choosing UPDATE or INSTALL DRIVER and when asked pointing it to the folder where you unzipped the drivers.
3. Then go back to the cmd window and type:
Code:
cd C:\Android
(i) Then type:
Code:
fastboot.exe -w
(ii) Once that's completed, type:
Code:
fastboot.exe erase system
(iii) Once that's completed, type:
Code:
fastboot.exe flash system system.img
(iv) Once that's completed, type:
Code:
fastboot.exe flash boot boot.img
(v) Once that's completed, type:
Code:
fastboot.exe reboot
4. Your phone will now reboot with CyanogenMod 6.1.1 (Android 2.2.1). The first boot might take longer than a normal boot.
If your phone stays at a blank screen you simply forgot to do one of the above steps, in which case simply repeat them. It is likely if that happens that you simply forgot the flash boot image instruction.
5. You can now re-insert your SD card and go to Settings>SD Card and Phone Storage>Mount SD Card
Enjoy!
The instructions for flashing both the firmware with fastboot and flashing CyanogenMod are included in the zip archives called 'Readme'. I'll update the links so that you'll always have the most up to date version of CyanogenMod available for download, note that if you choose to update your phone you will loose all your data including apps etc. so backup before you update
And that, with a few comments added by myself, is the guide.
Once you have set your phone up the way you want power off your phone. Hold the HOME and POWER buttons down while the LG logo appears and you will see a menu appear on screen.
Using the volume down key to navigate the different menu choices, and the camera button to select an option choose the BACKUP OR RESTORE option and from the sub menu that it will give you choose BACKUP.
This will make a backup of your phone AND all your data, if you ever mess up an update or think you have damaged your phone in the future simply holdthe POWER and HOME buttons down and when the menu appears choose the RESTORE option
Click to expand...
Click to collapse
And...
Don;t forget to install Fastboot drivers.

Dude
thanks a lot for your lengthy post and effort .I appreciate it .
but unfortunately U seem to miss the post I wrote.
MY LG doesn't even start anymore after using the Hack tool to upgrade it ...
SO its futile ??
I cant start the phone at all ...
After following yesterdays advice Its dead ..
Great init

Oh dang. Doesn't even turn on? No LG boot logo?
Well...if it's bricked...the only three ways are:
1) Get it repaired/replaced.
2) Buy a new phone.
3) Use it as a paperweight.
=)

No my friend ..its DEAD !!!!
following the guide to the letter
Installed parser got the hack tool
run all as admin and made sure I started windows enabler
All the things in the guide
worked a charm until reboot
Not its black and dead!!!
ANY IDEAS !!!!?????

Have you tried this...
If you did it with kdz updater than:
pull out battery, sim and sd
connect phone with computer
disable lg modem in the device manager
flash a rom with fastboot
go in fastboot by camara+power
connect to computer
type 'fastboot -w' and 'fastboot reboot' in cmd
Click to expand...
Click to collapse

I cannot see why this could work
The phone is dead ! it doest charge! it doesn't connect to the pc ! USB cable in out makes no difference !
I d love to try but how ??

contact303 said:
I cannot see why this could work
The phone is dead ! it doest charge! it doesn't connect to the pc ! USB cable in out makes no difference !
I d love to try but how ??
Click to expand...
Click to collapse
You can try by pulling out your battery, SIM card and SD card...
Note to you: Try everything that is possible and don't give up. Maybe you will fix it if you try.

Yes of course man I ll try thanks for the encouragement and your effort
It doesn't power at all
I DOESN'T connect to the pc
It Makes no difference if i have battery in or out .
sd card and sim are long removed ..and I tried with and without battery as well.
It updated, then rebooted to never come back ...
update tool reported Finished at the end
but its dead !!!
I understand id have a chance if i had at least a boot but I dont It dotn boot it dont Power up

Try getting into Emergency/Download mode by holding down "Volume Down" button and plugging into PC.
After that...try reflashing.
GL man.

Nope
Tried that combination as well

contact303 said:
Nope
Tried that combination as well
Click to expand...
Click to collapse
Opps sorry..."Volume Down" + "Power BUtton" while plugging into PC.
Try a hard reset as well...
Hold down VOLUME UP + HOME + SEARCH buttons for 5 seconds. (But phone needs to be turned on...)

MegaBubbletea said:
Opps sorry..."Volume Down" + "Power BUtton" while plugging into PC.
Click to expand...
Click to collapse
LOL yeah i knowww
I tried that as well
NO luck
hard reset i cant Its not on ...

Well...does anything happen when you press the "Power button"?

Dude LOLOL
Read again my 1st 2 posts
ITS dead ! nothing happens!
With battery or without makes no difference
NO BOOT! No power nothing
i followed the upgrade post in your 1t reply
it went all very well as i say
then it reboot and never got back

Hmm...probably give it a rest for a while...and then try again.
If all else fails..last resort.
Send back to LG for repairs or replacement.

mmh
So I gues iam screwed ..
I didn't even want to get into moddin the gt540 . Just the OFFICIAL 2.1 release really ..
And even that LG cant do without f&*kin me phone to Portuguese
So Well done LG )

AT&t Huawei Ascend XT H1611 Rooting Help.

I have unlocked the bootloader but I can not figure out how to root this thing at all. Has anyone had any success? I would like TWRP and SuperU.

this device is new yet. give it time

Tmobilefan906 said:
this device is new yet. give it time
Click to expand...
Click to collapse
Yeah I didn't realize how new this was whenever I posted it.

TWRP and root instructions available now in post 1 of
https://forum.xda-developers.com/android/general/huawei-ascend-xt-h1611-t3507933/
dabadguycr said:
I have unlocked the bootloader but I can not figure out how to root this thing at all. Has anyone had any success? I would like TWRP and SuperU.
Click to expand...
Click to collapse

divineBliss said:
TWRP and root instructions available now in post 1 of
https://forum.xda-developers.com/android/general/huawei-ascend-xt-h1611-t3507933/
Click to expand...
Click to collapse
You've already been helping me before you posted this.

People reading this thread might not realize we have root now. It's for their benefit .
dabadguycr said:
You've already been helping me before you posted this.
Click to expand...
Click to collapse

divineBliss said:
People reading this thread might not realize we have root now. It's for their benefit .
Click to expand...
Click to collapse
Good Point, I know my thread shows up first on Bing whenever I search for my phone and rooting help.

I have another XT and followed all instructions fine but no SuperSU when checking the phone. I tried flashing it twice (the one from the OP in main thread) and nothing. Am I missing a step?
I had installed fine on the first phone. this new one is 100% stock, unlocked bootloader, installed TWRP successfully but no supersu and root checker confirms no root.

Is it B140 or what? If you are missing a step, only you can check that.
powerserge1 said:
I have another XT and followed all instructions fine but no SuperSU when checking the phone. I tried flashing it twice (the one from the OP in main thread) and nothing. Am I missing a step?
I had installed fine on the first phone. this new one is 100% stock, unlocked bootloader, installed TWRP successfully but no supersu and root checker confirms no root.
Click to expand...
Click to collapse

divineBliss said:
Is it B140 or what? If you are missing a step, only you can check that.
Click to expand...
Click to collapse
Fixed

Can someone check the EMUI Huawei website for the unlock bootloader? Is it still working for requesting code? It keeps loop me back to the EMUI 5.0 page

sweetboy02125 said:
Can someone check the EMUI Huawei website for the unlock bootloader? Is it still working for requesting code? It keeps loop me back to the EMUI 5.0 page
Click to expand...
Click to collapse
Ya same. I got angry since I spent hours trying to find it so I just paid $4 and had DC-Unlocker unlock my bootloader.

sweetboy02125 said:
Can someone check the EMUI Huawei website for the unlock bootloader? Is it still working for requesting code? It keeps loop me back to the EMUI 5.0 page
Click to expand...
Click to collapse
webosFTW said:
Ya same. I got angry since I spent hours trying to find it so I just paid $4 and had DC-Unlocker unlock my bootloader.
Click to expand...
Click to collapse
If you follow this guide there should be no issue. The rootmygalaxy link should be pretty straightforward at unlocking the bootloader. The guide should be stickied in the OP.
https://forum.xda-developers.com/showpost.php?p=70515102&postcount=649

powerserge1 said:
If you follow this guide there should be no issue. The rootmygalaxy link should be pretty straightforward at unlocking the bootloader. The guide should be stickied in the OP.
https://forum.xda-developers.com/showpost.php?p=70515102&postcount=649
Click to expand...
Click to collapse
The issue is that https://emui.huawei.com/en/plugin.php?id=unlock that page hasnt worked for days. Keep redirecting me to the main page.

webosFTW said:
The issue is that https://emui.huawei.com/en/plugin.php?id=unlock that page hasnt worked for days. Keep redirecting me to the main page.
Click to expand...
Click to collapse
Yes use a different browser. Not working with chrome but working with edge. Go to the same link, it will bring you to EMUI 5.0 page, towards the top click on "download" then on the following page under the search bar click on "unlock bootloader" and it will bring you to the unlocking page. Just confirmed working. Updating the guide and will make a new post for root and twrp
Updated guide: https://forum.xda-developers.com/android/development/huawei-ascend-xt-h1611-feb27-2017-t3564389

Unlocked the boot loader, now adb/fastboot-15 Second won't work
Hello guys!
I used the 15 Second minimal adb/fastboot package from this site to unlock the boot loader. All seemed to go well, a screen message said success or something like that. It's been over 2 weeks since I had to put the phone down and take care of some other business. Now, after turning the phone off and then back on again when I am ready when I type in "fastboot devices" in the elevated cmd window in the adb directory the only message that comes back is "waiting on the device." Or the equivalent. I have tried what I could find from searching with Google to no avail. I am pretty sure that I am using the same cord, laptop, and everything that worked when I unlocked the boot loader. So, I am at a loss.
My goal originally was to use madvane20's slim downed version of b180 just to get it working again as my almost 2 years old P10 was stolen. I have no money in my budget for a new phone until Feb. 2020. I last talked with him in a series of PM's ending around May of last year, when a reply stated he had to get back to work on the last part of it. I have since seen a post referencing that it was ready in a package that after I had successfully unlocked the boot loader, it would root and install everything. This would have made me a happy guy... but I also noticed a custom ROM is now to be had based on Android 7. In order to get my Bank App's updated version of it's Mobile App to work, I have to install Android v 7 or higher. That's the main app that needs v 7 or better that I use daily. Several times...
But, now when I power up the phone, the first message is, "Your device has been unlocked and cannot be trusted... Press the Power Key now to reboot. Or the device will automatically reboot in 5 seconds." Which it does, the first time walking me through the Set-Up process, now it just boots into Huawei's EMUI 4.1. But, I cannot get adb to find the phone to follow the remainder of the instructions in the guide, "AT&T Huawei Ascend XT H1611 Feb27, 2017 update all things Root and TWRP (guide)"
Nor, can I get into the Recovery mode using the Vol Down/Power Keys.
So, where have I gone wrong or what is my next step? Since the phone can not be found and I can not get into Recovery using the proper keys what do I need to do and how do I do it?
I want to:
Root the phone.
Install the custom ROM I mentioned.
Or, Install an upgrade, if possible, to Android v 7... But,
can not get the phone recognized to get into a Recovery mode (is that right?) to push TWRP to it as well as the other files
it needs and to do whatever the Guides tell me to do.
Specs on the phone:
Model: H1611
Build: H1611C07B180
EMUI v: 4.1
Android v: 6.0.1
Security Patch level: September 1, 2017
Baseband v: 20234
Kernal v: 3.10.49-g03b627c
Sorry for the long post, but I thought it might answer some questions that came to mind before replying back.
Thanks in advance. I'm not here often, but when I am I am always relieved to get out of some jam I have gotten myself into!
mike0921

mike0921,
What happens if the phone is in normal mode and you type "adb devices" from the PC adb directory command prompt?

divineBliss said:
mike0921,
What happens if the phone is in normal mode and you type "adb devices" from the PC adb directory command prompt?
Click to expand...
Click to collapse
I just now found a new(er) USB cable for the phone. I also uninstalled the H1611 under Portable Devices in the Device Manager and rebooted the laptop. Where before, under Events the message was ".... needs further installation..." it now showed a successful install.
At the "adb devices" command, nothing happened, no response. I went and found the directions and explanations for the use of the top 30 commands. It told me to reboot the bootloader. A screen on the phone had me confirm the RSA command. Afterwhich the Fastoot&Recovery Mode screen with the little green Android guy with the message Phone Unlocked, FRP Unlock messages.
I went back to the elevated cmd window and at the adb directory command prompt entered "fastboot devices" and Voila! There were some letters and numbers, five or six spaces and the word "fastboot."
So, am I good to go with the rest of the steps in the guide from here? A question, about him saying to flash the Superuser zip file using TWRP. Is that suppose to already be on my SD card to flash it or can I flash it from my laptop without having to touch the phone or current USB cable? It seems stable but I am a bit gunshy and don't have much faith left in the old equipment I am having to use. A very old, refurbished HP Elitebook 8460P which is running really wonky, a not too new USB cable, the last of five I dug up and have used and finally works but is a bit loose, and Windows 10 1903 etc., which has disappeared all kinds of things I am having to run down) Can I use the "push" command to move the zip file to the SD card? And is that a fastboot function or an adb function? I seem to have read somewhere along the way to this point here that "push" is what I want to do, but powerserge1's Step 7 states to flash it using TWRP. I just want to check. And should questions from here on out be placed in his 184-page thread? I still haven't managed to read the whole thing, it seems to go off in so many other directions that I don't think I need to travel down. But, I will follow your advice.
I want to say a hearty thanks for your help. I was stuck, confused and frustrated at getting no results from Googling and reading for hours and getting nowhere it seemed. And I think I am good to go now.
Thoughts? Suggestions?
Just to be clear, The SuperSU zip file is currently on my laptop in the adb directory. Not on the phone.

mike0921 said:
I just now found a new(er) USB cable for the phone. I also uninstalled the H1611 under Portable Devices in the Device Manager and rebooted the laptop. Where before, under Events the message was ".... needs further installation..." it now showed a successful install.
At the "adb devices" command, nothing happened, no response. I went and found the directions and explanations for the use of the top 30 commands. It told me to reboot the bootloader. A screen on the phone had me confirm the RSA command. Afterwhich the Fastoot&Recovery Mode screen with the little green Android guy with the message Phone Unlocked, FRP Unlock messages.
I went back to the elevated cmd window and at the adb directory command prompt entered "fastboot devices" and Voila! There were some letters and numbers, five or six spaces and the word "fastboot."
So, am I good to go with the rest of the steps in the guide from here? A question, about him saying to flash the Superuser zip file using TWRP. Is that suppose to already be on my SD card to flash it or can I flash it from my laptop without having to touch the phone or current USB cable? It seems stable but I am a bit gunshy and don't have much faith left in the old equipment I am having to use. A very old, refurbished HP Elitebook 8460P which is running really wonky, a not too new USB cable, the last of five I dug up and have used and finally works but is a bit loose, and Windows 10 1903 etc., which has disappeared all kinds of things I am having to run down) Can I use the "push" command to move the zip file to the SD card? And is that a fastboot function or an adb function? I seem to have read somewhere along the way to this point here that "push" is what I want to do, but powerserge1's Step 7 states to flash it using TWRP. I just want to check. And should questions from here on out be placed in his 184-page thread? I still haven't managed to read the whole thing, it seems to go off in so many other directions that I don't think I need to travel down. But, I will follow your advice.
I want to say a hearty thanks for your help. I was stuck, confused and frustrated at getting no results from Googling and reading for hours and getting nowhere it seemed. And I think I am good to go now.
Thoughts? Suggestions?
Just to be clear, The SuperSU zip file is currently on my laptop in the adb directory. Not on the phone.
Click to expand...
Click to collapse
And after backing up in TRWP, I just checked the SD card's contents for the backup and saw the SuperSU zip file neatly placed on it as well. Just to be clear!??!
Okay, I somehow screwed this up I think. I was a little distracted by a friend dropping by. After telling her to give me a minute, I looked back at the phone after following Step 6:
Step 6: Confirm phone goes to FASTBOOT & RESCUE mode.
a) fastboot devices (to make sure your device is recognized)
b) fastboot boot TWRP.img (boots TWRP.img from Step 3)
c) The phone will boot into TWRP. Always select Keep Read Only from the first screen every time you go into TWRP.
Peek around a bit if you want to, then use TWRP to backup your stock recovery to external micro SD.
d) Reboot bootloader from inside TWRP to flash this custom recovery image (no adb command this time, you are rebooting to the bootloader from TWRP, you will see this option under "reboot" in TWRP).
e) fastboot flash recovery TWRP.img (now flashes TWRP recovery to the phone)
I then went to Step 7:
Step 7: After phone reboots, get into TWRP recovery repeating Step 6, a and b or hold the power button and volume up button from power-off state, then release when you see Huawei logo.
But now, the phone isn't being recognized again. And when I shut it off, hold Volume Up and Power buttons, I get a screen that asks if I want to: Reboot system now; Wipe data/factory reset; Wipe cache partition. Not the Recovery Screen with the options I got used to seeing in little green characters.
I tried the Reboot system now option and I'm back into the Huawei EMUI with everything appearing unchanged. Powered off, did the Vol Up + Power buttons and am back with the screen offering the three options I mentioned above. And the phone not being recognized after the "Devices" command.
Can you clarify my confusion? What am I doing wrong? Or not doing?
Thanks.
mike
---------- Post added at 06:47 PM ---------- Previous post was at 05:53 PM ----------
mike0921 said:
I just now found a new(er) USB cable for the phone. I also uninstalled the H1611 under Portable Devices in the Device Manager and rebooted the laptop. Where before, under Events the message was ".... needs further installation..." it now showed a successful install.
At the "adb devices" command, nothing happened, no response. I went and found the directions and explanations for the use of the top 30 commands. It told me to reboot the bootloader. A screen on the phone had me confirm the RSA command. Afterwhich the Fastoot&Recovery Mode screen with the little green Android guy with the message Phone Unlocked, FRP Unlock messages.
I went back to the elevated cmd window and at the adb directory command prompt entered "fastboot devices" and Voila! There were some letters and numbers, five or six spaces and the word "fastboot."
So, am I good to go with the rest of the steps in the guide from here? A question, about him saying to flash the Superuser zip file using TWRP. Is that suppose to already be on my SD card to flash it or can I flash it from my laptop without having to touch the phone or current USB cable? It seems stable but I am a bit gunshy and don't have much faith left in the old equipment I am having to use. A very old, refurbished HP Elitebook 8460P which is running really wonky, a not too new USB cable, the last of five I dug up and have used and finally works but is a bit loose, and Windows 10 1903 etc., which has disappeared all kinds of things I am having to run down) Can I use the "push" command to move the zip file to the SD card? And is that a fastboot function or an adb function? I seem to have read somewhere along the way to this point here that "push" is what I want to do, but powerserge1's Step 7 states to flash it using TWRP. I just want to check. And should questions from here on out be placed in his 184-page thread? I still haven't managed to read the whole thing, it seems to go off in so many other directions that I don't think I need to travel down. But, I will follow your advice.
I want to say a hearty thanks for your help. I was stuck, confused and frustrated at getting no results from Googling and reading for hours and getting nowhere it seemed. And I think I am good to go now.
Thoughts? Suggestions?
Just to be clear, The SuperSU zip file is currently on my laptop in the adb directory. Not on the phone.
Click to expand...
Click to collapse
And after backing up in TRWP, I just checked the SD card's contents for the backup and saw the SuperSU zip file neatly placed on it as well. Just to be clear!??!
Okay, I somehow screwed this up I think. I was a little distracted by a friend dropping by. After telling her to give me a minute, I looked back at the phone after following Step 6:
Step 6: Confirm phone goes to FASTBOOT & RESCUE mode.
a) fastboot devices (to make sure your device is recognized)
b) fastboot boot TWRP.img (boots TWRP.img from Step 3)
c) The phone will boot into TWRP. Always select Keep Read Only from the first screen every time you go into TWRP.
Peek around a bit if you want to, then use TWRP to backup your stock recovery to external micro SD.
d) Reboot bootloader from inside TWRP to flash this custom recovery image (no adb command this time, you are rebooting to the bootloader from TWRP, you will see this option under "reboot" in TWRP).
e) fastboot flash recovery TWRP.img (now flashes TWRP recovery to the phone)
I then went to Step 7:
Step 7: After phone reboots, get into TWRP recovery repeating Step 6, a and b or hold the power button and volume up button from power-off state, then release when you see Huawei logo.
But now, the phone isn't being recognized again. And when I shut it off, hold Volume Up and Power buttons, I get a screen that asks if I want to: Reboot system now; Wipe data/factory reset; Wipe cache partition. Not the Recovery Screen with the options I got used to seeing in little green characters.
I tried the Reboot system now option and I'm back into the Huawei EMUI with everything appearing unchanged. Powered off, did the Vol Up + Power buttons and am back with the screen offering the three options I mentioned above. And the phone not being recognized after the "Devices" command.
Can you clarify my confusion? What am I doing wrong? Or not doing?
Thanks.
mike

Sorry for the delay. What's the latest status with attempts to root the phone?

[Sharing Method] Bootloader Locked+Dead Boot+OEM Lock+Recovery Stuck

Hello XDA
As title say, I 'm going share my experience in this thread.
History
I purchased this device almost 8 month back.Purchased from a local store.Was very smooth and i was satisfied with the performance.Battery was good.Got regular update and these updates are from google,so why not install it,right?Then this Android N came,and i was so happy.7.0.0 was good.Then the nightmare 7.1.2 came.Phone started to lag continuously,Battery drained too much.But I was like Okay.May be this will fixed in new update.Then suddenly one day my phone was stuck.Not booting.Stucked at Google.I understood that phone already booted and fingerprint was too working but it showed nothing on display just black light.I was afraid as i didn't purchase it from Google Play or any authorized seller.So no warranty or chance of having replacement.So I started searching about this issue and found not only me many people are facing this.But there are no proper guideline or solving this issue.Tried everything and ended up with Locked Bootloader Irony!
Journey
As i never try to mess with my phone because it was Nexus 5x! So i never touch OEM or try to unlock the bootloader.So i tried to access stock recovery,But Alas! in recovery Volume up and down wasn't working.So I couldn't wipe or factory reset.So Now ended up with :
1.Locked Bootloader
2.Locked OEM
3.Recovery Stuck
Googled and found many solutions but none of them came to solve my issue.So i thought why not flash stock rom.But HOW! Cause fastboot only work with unlocked bootloader.And you can't unlock bootloader when your OEM is locked and you can't unlock it with fastboot.It can be only unlocked from developer option only.GOD!
Now I have only 2 options left:
1.Fastboot mod where no functions working
2.Download Mod (This will save you)
Now fastboot option is out and only download mod option is available.So what can i do with Download Mod?
LGUP TOOL helped me.Downloaded a tot file for Global version (LGH791) and flashed it and stucked at google logo and in recovery too.But next time i flashed the same file in a different way.Ok here it is:
1.Drivers are important here.I'm using windows 10.I have adb and fastboot and Lg drivers.Workplace okay.
2.Opened device manager and change the com port of Android phone 3 to 41. Port Changed!
3.Connected my phone to pc using 3rd party cable (Careful here,try to use original cable.) and entered into download mod and.
4.Opened LGUP Tool ,checked REFURBISHED mod,checked BIN file and select the tot file downloaded before.And quicky close it.(No need to click start)
5.Then again opened lg tool and click start.(BIN Checked and it showed the previously selected tot file).No need add anything new this time,just open and click START.
6.Rebooted and again stucked at Google screen.But wait! recovery is working.Pressing and holding volume up button for a while then a android logo with red cross inside will come up.Now holding power button and volume down button at the same time,Recovery will show and menu is working.Great!
7.Now Wiped cache and factory reset.And after that selected Apply update from Adb sideload
8.My device was connected to pc from the beginning,right? Now i downloaded a file previously called bullhead-ota-opp2.170420.019-c449d2bb.zip from Google Nexus 5x OTA update page.
9.In Adb folder,copied the file and named it ota.zip.Opened a command prompt using shift+right click in the folder.Phone was on Adb sideload mode.Typing this command adb sideload ota.zip
10.This took more than 8-9 minutes to finish.After flashing and phone rebooted.WOW
11.Couldn't believe my eyes.The OTA update was about Android O.I quickly enabled the developer menu and made oem unlcocked and usb debugging on.Boot into bootloader and unlock bootloader with this command fastboot flashing unlock
12.Now bootloader is unlocked and i flashed TWRP recovery for future need.
13.Rebooted the phone and after using for 1 minute the phone freezed again
14.This is the end of the story for today.
Planning
I'm thinking the OTA update was the problem.Now I'm downloading 6.0.1 version.And will do a clean install.Let's see what happens next.
Any kind of help is appreciated.If you think there is something i'm missing here then please suggest.
And Thanks to XDA.I got all these helps from here.Will update the post tomorrow.

You downloaded Android O Developer Preview. Final OTAs are here:
https://developers.google.com/android/ota
Just try flashing newest Factory Image via fastboot, but don't forget to flash TWRP back:
https://developers.google.com/android/images

TBH I NEVER thought this phone will be dead by hardware failure all of a sudden, I dont mind another few hundreds bucks but the problem now is the fking data within it.
Cant even pass google logo if you choose Recovery Mode
GG LG, well played

I have a 16gb variant dead....same issue like urs .....can i use the same lgh791 tot file?... in fastboot it says lgh791 16gb

usefully
usefully

I STRONGLY recommend that the original post is corrected to change "Download mod" to "Download mode" in all of its four occurences.
Same for one ocurrence of "Fastboot mod".
It is horribly confusing as it is, as calling them "mod" implies some modification you have to apply to the phone (be it software or hardware).

same of my expirience, flash 4CoreOreo..
my nexus 5x now is fully working

the_uker said:
I STRONGLY recommend that the original post is corrected to change "Download mod" to "Download mode" in all of its four occurences.
Same for one ocurrence of "Fastboot mod".
It is horribly confusing as it is, as calling them "mod" implies some modification you have to apply to the phone (be it software or hardware).
Click to expand...
Click to collapse
I suppose that makes sense. Then again, when an instruction is telling you to boot into download mod.....using common sense I'm gonna understand that's a typo and they meant download mode. But you're right, for some folks that may be a bit of a challenge. Common sense isn't as common as it was when I was young.

And the links?
I'm brazilian and i'm having a hard time to find the links to download stuff. Mine is dead and bootloader blocked. The tutorial seems to work but i can't understand well

Interesting. Thanks

Huawei p9 lite bricked, no fastboot, unlocked and stucked on boot....

Hello,
I am from Greece and Ive bought from Vodafone a Huawei P9 lite vns-l21 before one month. Ive installed the nougat rom 370 with firmware finder but I made a mistake choozing the NRD-90M test key. So I begun to roll back to Marshmallow. Everything ok. Then Itried to install an other rom from firmware finder(i think C432b371) and again NRD-90M test key...
Again roll back to Marshmallow...so in the first step when i was trying to install with dload method the Huawei P9 Lite Rollback Package For L21C432 (EU) my phone stucked on boot loop but I had fastboot. Then I have unlocked the bootloader to see if there is anything that i can do with srk tool and now i have a beautifull bricked phone stuck :
"Your device has been unlocked and can't be trusted.
you device is booting now"
In this point nothing happens, I can not go to fast boot, No recovery mode, The hardware keys not doing anything, only resetting the phone in loop..
I dont know what to do and Huawei wants 215euro to fix my phone.
My mistake I know but is there enything that i can do know? Its a new phone!
Sorry for my english

I would suggest getting an sdcard and creating a dload folder inside, then putting an official rom UPDATE.APP file inside the dload folder and try 3button method

o-w-a said:
I would suggest getting an sdcard and creating a dload folder inside, then putting an official rom UPDATE.APP file inside the dload folder and try 3button method
Click to expand...
Click to collapse
Thanks for the advice but I have already tried that with stock rom B161 and nothing happens with 3 button method. Still in the same situation.. Everything i do with the buttons the phone resetting and stays on until the battery is dead..

ioanpara said:
Thanks for the advice but I have already tried that with stock rom B161 and nothing happens with 3 button method. Still in the same situation..
Click to expand...
Click to collapse
do you get verification error or is it just stuck at "your devices is booting now"

o-w-a said:
do you get verification error or is it just stuck at "your devices is booting now"
Click to expand...
Click to collapse
Stuck on "your device is booting now".

ioanpara said:
Stuck on "your device is booting now".
Click to expand...
Click to collapse
As far as I understand, you can't even power off your device which is a problem since the 3button method won't work if you can't power off the device.

o-w-a said:
As far as I understand, you can't even power off your device which is a problem since the 3button method won't work if you can't power off the device.
Click to expand...
Click to collapse
Exactly!

I am still in the same situation... Anyone who knows what to do?

ioanpara said:
Hello,
I am from Greece and Ive bought from Vodafone a Huawei P9 lite vns-l21 before one month. Ive installed the nougat rom 370 with firmware finder but I made a mistake choozing the NRD-90M test key. So I begun to roll back to Marshmallow. Everything ok. Then Itried to install an other rom from firmware finder(i think C432b371) and again NRD-90M test key...
Again roll back to Marshmallow...so in the first step when i was trying to install with dload method the Huawei P9 Lite Rollback Package For L21C432 (EU) my phone stucked on boot loop but I had fastboot. Then I have unlocked the bootloader to see if there is anything that i can do with srk tool and now i have a beautifull bricked phone stuck :
"Your device has been unlocked and can't be trusted.
you device is booting now"
In this point nothing happens, I can not go to fast boot, No recovery mode, The hardware keys not doing anything, only resetting the phone in loop..
I dont know what to do and Huawei wants 215euro to fix my phone.
My mistake I know but is there enything that i can do know? Its a new phone!
Sorry for my english
Click to expand...
Click to collapse
Hmm I dont get why they want 215 euro to exchange the storage chip.
I guess your phone is pretty much a brick now have fun. Lol sry

I had a similar problem with the boot-loop.
Press PowerOff until the screen goes black, and then immediately leave power-off and press Power Off + Volume Up for ever until the phone boots normally.
That's what I did and worked for me.

Can you boot to fastboot, if you can you can recover it with DC-Phoenix tool.

Dejan Kruljac said:
Can you boot to fastboot, if you can you can recover it with DC-Phoenix tool.
Click to expand...
Click to collapse
No he cant, I have the same problem. Cant fastboot, adb or 3 button method. Even tried unplugging battery then doing 3 button method.

Anyone sopve this problem with no fastboot no recovery no 3 buttons mode?

try to drain the battery, keep screen on, or keep phone on until battery is 0%, you can't turn it on . keep volume down and power pressed, plug usb to pc , if you're lucky fastboot could be ok

Hi there, I also managed to brick my P9Lite - no recovery, no fastboot. After draining the battery completly the phone starts fine but I can't install system updates. I guess I have to live with that. Unfortunately I can't activate bluetooth. Does anyone has an idea how to get bluetooth working again?

idk for your BT issue , but did you try Firmware Finder for Huawei ? easy to use, you will probably able to dl an update. don't use "small " package OTA, use full firmware, about1.6 or 1.8 Go, may could fix your BT.

sonneper said:
idk for your BT issue , but did you try Firmware Finder for Huawei ? easy to use, you will probably able to dl an update. don't use "small " package OTA, use full firmware, about1.6 or 1.8 Go, may could fix your BT.
Click to expand...
Click to collapse
didn't work out as Firmware Finder is only another way to find a firmware but not another way to install the firmware...

Hello guys,
sorry if i write this but i think necessary to grab best helps..
Try to describe problem in detail (ex. - i was upgrading/downgrading from..........to............ firmware and it bricks, etc...)
Your latest working phone/system/firmware (ex. - mine was VNS-L31C432B381-before i upgraded to EliteRom).
Some information changes according to the country / region of the world in which you live,
so they are useful for those who help you to redirect to the correct thread / give right suggestions...
All the best guyz

didn't work out as Firmware Finder is only another way to find a firmware but not another way to install the firmware...
Yes , a way to get last firmware, or firmware you want through the huawei update app. Without firmware finder ,no way to " force" huawei update app to install anything you want on your device

Sorry for the late response, I'm reading the thread right now. Firmware Finder can also be used to install firmware through eRecovery. Install Firmware Finder for Windows: http://pro-teammt.ru/projects/hwff/v2/GetLatestVersion.action
You need to write down your existing and change both DNS addresses in your router to: 81.177.139.39
You also need to deactivate IPv6 protocol.
Open FirmwareFinderRewrite.exe, go to "common base" and search VNS-LXXCXXX (Your model and customization). Copy the link in "changelog" not of the newest, but of the 2nd or 3rd youngest firmware. Check if it has been approved by pasting the link under the tab with the checkmark (5th position counting from left). If the response is "This firmware was approved to install" you are ready to go.
Copy the same link in the proxy field (the cloud symbol, 4th position counting from left). Click on "set" and "register update".
Now switch off your phone, press "Vol+" and simultaneously connect it to the PC. You enter eRecovery now. Tap on "Download latest version and recovery". Your phone should start the download now, after a couple percent you can reset your router settings, the download will continue. If all is well, the firmware will then be installed.

Soft Brick, A2017G, Bootloader unlocked, Stock Recovery

(or is it hard brick)
Hi,
A2017G
Started with marshmallow,
Unlocked bootloader
attempted to install Slim7
seemed to work but with some possible errors, (wouldn't sync with google... retrospect I should have looked elsewhere before...)
attempted in install stock rom
using
ZTE_A2017GV1.2.0B04_BootStack_by_tron1.zip
ZTE_A2017GV1.2.0B04_Stock_System_by_tron1.zip
which wouldn't boot
So I tried reinstall Slim7
then stock again,
then, like the noob that I am, I removed twrp with
ZTE_A2017GV1.2.0B04_Full_Stock_Reverter_by_tron1.zip
which installs stock recovery
so, now I have a stock rom that won't boot,
an unlocked bootloader
and stock recovery
Not sure what to do from here
thanks in advance for any assistance.

I can abd sideload and update from SD card, but everything I have fails signature verification.
edit: so frustrating trying to find that 1 zip

Dizzee said:
(or is it hard brick)
Hi,
A2017G
Started with marshmallow,
Unlocked bootloader
attempted to install Slim7
seemed to work but with some possible errors, (wouldn't sync with google... retrospect I should have looked elsewhere before...)
attempted in install stock rom
using
ZTE_A2017GV1.2.0B04_BootStack_by_tron1.zip
ZTE_A2017GV1.2.0B04_Stock_System_by_tron1.zip
which wouldn't boot
So I tried reinstall Slim7
then stock again,
then, like the noob that I am, I removed twrp with
ZTE_A2017GV1.2.0B04_Full_Stock_Reverter_by_tron1.zip
which installs stock recovery
so, now I have a stock rom that won't boot,
an unlocked bootloader
and stock recovery
Not sure what to do from here
thanks in advance for any assistance.
Click to expand...
Click to collapse
Just use MiFlash, that one's guaranteed to work. Read my DFU unbrick guide to know how to use it. Just skip the part where you have to disassemble the phone, since you can get to EDL mode by (with the phone off and the USB cable connected to the PC) holding both volume buttons and inserting the USB-C cable to the phone.

I did read your guide, was, hoping to avoid dismantling it...
I tried pressing all 3 buttons.
Am I understanding the procedure correctly:
[phone switched off] + usb-C cable connected to PC only
MiFlash running at this point??
Hold both volume keys in and in insert Cable to Phone
at this point is the phone supposed to switch on?
At no point am I supposed to press the power button?
fyi: I will try different combinations, is great to have a solution, thank you.
Ah.... ok... so, the phone will display nothing, rely on the sound of PC and/or the device manager check and/or hit refresh on miflash
Fyi to anyone, if you have axon7toolkit installed and thus can't install a second version of MiFlash, open up the toolkit and hit 7 (unlock bootloader) to fire up MiFlash... or just go to C:\XiaoMi\XiaoMiFlash
the FULL_EDL file I have produces a couldn't find script Error when loading into MiFlash
so far when attempting to flash all zips
I have started MiFlash with admin
unzipped FULL_EDL file to a folder in root C:\ and ensured there are no spaces in address.
Every time / Every file produces couldn't find script error when loaded into MiFlash
when I attempt to flash the file it says cannot receive hello packet and then times out with an error
Tried disabling anti-virus/firewall, still same error
upgraded MiFlash to 2017.4.24.0 ( older 2016 is included with axon7toolkit), this removes the couldn't find script error, but still not receiving a hello packet, gunna fiddle with the phone as I'm pretty sure the error is coming from there
YES!
rebooted phone, turned off, restarted into EDL, flashed the stock rom from zte site... is in chinese... but it works. Thank you Thank you
so adventure over, after all that I am back to 6.0.1...

Dizzee said:
I did read your guide, was, hoping to avoid dismantling it...
I tried pressing all 3 buttons.
Am I understanding the procedure correctly:
[phone switched off] + usb-C cable connected to PC only
MiFlash running at this point??
Hold both volume keys in and in insert Cable to Phone
at this point is the phone supposed to switch on?
At no point am I supposed to press the power button?
fyi: I will try different combinations, is great to have a solution, thank you.
Ah.... ok... so, the phone will display nothing, rely on the sound of PC and/or the device manager check and/or hit refresh on miflash
Fyi to anyone, if you have axon7toolkit installed and thus can't install a second version of MiFlash, open up the toolkit and hit 7 (unlock bootloader) to fire up MiFlash... or just go to C:\XiaoMi\XiaoMiFlash
the FULL_EDL file I have produces a couldn't find script Error when loading into MiFlash
so far when attempting to flash all zips
I have started MiFlash with admin
unzipped FULL_EDL file to a folder in root C:\ and ensured there are no spaces in address.
Every time / Every file produces couldn't find script error when loaded into MiFlash
when I attempt to flash the file it says cannot receive hello packet and then times out with an error
Tried disabling anti-virus/firewall, still same error
upgraded MiFlash to 2017.4.24.0 ( older 2016 is included with axon7toolkit), this removes the couldn't find script error, but still not receiving a hello packet, gunna fiddle with the phone as I'm pretty sure the error is coming from there
YES!
rebooted phone, turned off, restarted into EDL, flashed the stock rom from zte site... is in chinese... but it works. Thank you Thank you
so adventure over, after all that I am back to 6.0.1...
Click to expand...
Click to collapse
What? It's in chinese?
Can you tell me the name of the file you used? Do you still have cell signal?

Choose an username... said:
What? It's in chinese?
Can you tell me the name of the file you used? Do you still have cell signal?
Click to expand...
Click to collapse
I got it from here: http://www.ztedevice.com/support
selected:- United Kingdom > Mobile Phone > Axon 7
it offers a file "AXON 7(ZTE A2017G) SD card software package(328540B2634ZTE A2017GV1.0.0B11)"
which hints at being compatible with A2017G... but is A2017V and is chinese, although you can change the language in settings there is still plenty here and there, plus chinese bloatware
and No, I didn't get cell signal.
I've gone back to Marshmellow, I will try again, didn't think it would be so different/difficult... Although wow at MiFlash.

FFS!!!! Relocked bootloader and bricked it!!! there should be a warning!
you gotta laugh,
I am a bit livid, I know the guides come with disclaimers, however, you'd think it would be an obvious important warning to make... DO NOT RELOCK YOUR PHONE.
FFS!

Dizzee said:
FFS!!!! Relocked bootloader and bricked it!!! there should be a warning!
you gotta laugh,
I am a bit livid, I know the guides come with disclaimers, however, you'd think it would be an obvious important warning to make... DO NOT RELOCK YOUR PHONE.
FFS!
Click to expand...
Click to collapse
Good lord...
You probably wiped out both IMEIs, now you relock out of the blue... Go to my DFU unbrick guide and stop doing dumb stuff :silly:

Choose an username... said:
Good lord...
You probably wiped out both IMEIs, now you relock out of the blue... Go to my DFU unbrick guide and stop doing dumb stuff :silly:
Click to expand...
Click to collapse
... after I finally got it working again (thanks for the assist), I thought relocking it was just making it secure again. I been rooting/unrooting and swapping out roms since the galaxy s2, who'd think you can't unlock and relock... I do think there should be warnings as it is too easy a mistake to make... lmao stop doing dumb stuff you start first
My phone is insured so I'm not overly fussed, but others will be less fortunate.

hello everywone...i have a troble to...my phone is A2017GV1.2.0B04 like this in post.
I bay this phone whit broken screen, i change the screen and try sim card but the phone is locked Whit google account... When I try my sim to test microphone, the phone it's work OK, but I unlock google account whit add tools and after that my phone don't have a service.
Phone tells no service or turned off airplane mode...what is not true... I can change the 4g/3g/2g connection to only 3g or something else... Wi-Fi and everything else work great but no service... The phone see what operator is on sim but no service... Somebody to help me please and tell me some tutorials how to fix?
I by this phone from Denmark and now I'm in Serbia... Eny help please
Thanks anyway Dragan
---------- Post added at 08:30 PM ---------- Previous post was at 08:27 PM ----------
Mistake,whit adb tools...