Database Users

Restore back to Stock Original Motorola Firmware Titan(XT1068) in OneClick

ONE Click Warranty Back
hello Friends This My First Thread on G 2014(Titan)
Now Get Yours Warranty Back In just one Click
No need to rememberer all this such big commands of FastBoot
i gonna present the simplest way to revert back to stock official Roms with both locked and unlocked Boatloader(after flash) which r Provided in the below links
Pls do press thanks If u really liked my work i need it :good:
best simple way in simple one click (action performed)
!!Disclaimer!!
NOTE: I am not responsible for any kind of boot-logo, corrupt partition,bricked devices, dead SD cards,other Issue etc As I am just new to android developing
This process have been tested personally on my device moto g 2104
NOTE :This Will wipe all your data so pls take all yours useful databackup
INSTRUCTION
1) Download and install the Basic Moto Drives in this http://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/97326/p/30,6720,9050
2)Download the required Official Firmware(KitKat,Lollipop) form here https://mega.nz/#F!Q9YHCQzY!dgyvAJ8eNA3t7az4vizwOQ which i have taken Through Original Motorola Firmware Collection[Thread] thanks to @gregor160300
all the Firmware are Official images and are uploaded Recently
3)Download the OneClick Tool zip according to yours need a(locked) and b(Unlocked) form Here
a)restore with locked Boatloader Here https://drive.google.com/open?id=0By-2WiK-9wJqfmlMT3BoMmxqakU0M0lJdDk0OGF3UmVJZWN5eW90a0pIdUtSU3BRb0pxbms
b)restore with unlocked Boatloader Here https://drive.google.com/open?id=0By-2WiK-9wJqfktRWG1wbFJ6S2JnLU5FTFBNUWp2ckRZWnZmMUVfV1hiX3JjUGw0am1LR2s
4)Now Extract the Firmware zip to a Particular Folder at your given location on your PC/Laptop
5)After That Extract the OneClick zip to a Same Folder (Where U have the Extracted the Firmware Files)
6)Boot your Moto G 2014 into FastBoot Mode and plug your Device into your computer (pls Make sure u have all the proper device drivers are installed)
6)Finally Go To the Extracted Folder and u will see OneClick .bat file just click on OneClick
U r done Njoy till its gets Completed
All the Firmware are Official images Your warranty may not Void also u may get Yours Warrenty Back
hope u Enjoy this
PLS DON'T MIRROR THE LINKS
sry for my bad english i will improve
special Thanks to both @ archies20 @gregor160300,Shawn5162 for their thread:laugh::laugh:
Please Do press Thanks button if u really liked My Work i really need it :good:

It's For Indian Version ?

yes u can check this according to the indian baseband

Tried it today and it worked flawlessly, thanks!

heeey thanks 4 the reveiw hope i will come with other thread

so hey guys. i have a moto g 2014 xt1068 dual sim variant. for some reason after unlocking bootloader, flashing TWRP, and flashing an other ROM(blisspop 5.1.1) for some reason my first sim card slot was like not working at all and my second sim doesnt have mobile data only calls. So I flashed stock firmware 5.0.2(RETAILDSDSALL_XT1068_5.0.2_LXB22.46-28_cid7_CFC.xml) but the problem still exists. I dont know what to do :'( any help?

Mike20017 said:
so hey guys. i have a moto g 2014 xt1068 dual sim variant. for some reason after unlocking bootloader, flashing TWRP, and flashing an other ROM(blisspop 5.1.1) for some reason my first sim card slot was like not working at all and my second sim doesnt have mobile data only calls. So I flashed stock firmware 5.0.2(RETAILDSDSALL_XT1068_5.0.2_LXB22.46-28_cid7_CFC.xml) but the problem still exists. I dont know what to do :'( any help?
Click to expand...
Click to collapse
Change both sim slots?

do a clean Install make a try if still not working change the baseband version and check out again if still not working den hope a hardware fix will resolve it

Hello,
First things first: thanks for this great tool! I needed to restore the original firmware and didn't know how to do that. With this tool it's quite simple.
I had only two small problems:
- the first time I've run tour .bat file I seen several commands being executed, all of the m with an OK in the end, but after all process the phone didn't boot, no recovery also. I ran the .bat file a second time and it's OK now.
- another strange thing happened: the boot logo screen reverted to the "unlocked bootloader" screen.
A question: can I flash only the bootlogo screen via adb?

Moto bootloop struck help help
Hello can any senior member plz help me out.
I have unlocked and rooted moto g2 2014 mobile it was working fine.
But I done a stupid thing by editing system file and overwriting it.
Then my phone stuck in boot loader
I can access recovery TWRP i tried to wipe Delvic and cache and factory resetting but it did'nt worked.
Therefore buy following the link i tried to flash with orginal frimware
www droidviewsmoto g 2014 to stock and lock the bootloader
it was not successful again it strucked in boot loop with Android dead symbol in recovery
------>> Then tried to install TWRP recovery it was successful, but unable to install super user.
There fore I tried to repeat the process buy using both sdk windows platfom tools and vfastboot
buy typing command in cmd as mfastboot.exe oem lock begin
and noticed error saying
hab check failed for boot
failed to verity hab image boot
failed to validate boot image
Plz sir can any one help me out plz

yes
yes u can using the img file
follow this instructions to remove the warning instruction
http://www.bhudroid.com/2015/08/remove-unlocked-bootloader-warning-on.html

Kindly First Update yours boot loader Version
Kindly First Update yours boot loader Version
this can be the an issue
and after that cleanly flash the latest TWRP recovery
and Finally any Latest Build Custom Rom
this may Works

Marcelo_RJ said:
Hello,
First things first: thanks for this great tool! I needed to restore the original firmware and didn't know how to do that. With this tool it's quite simple.
I had only two small problems:
- the first time I've run tour .bat file I seen several commands being executed, all of the m with an OK in the end, but after all process the phone didn't boot, no recovery also. I ran the .bat file a second time and it's OK now.
- another strange thing happened: the boot logo screen reverted to the "unlocked bootloader" screen.
A question: can I flash only the bootlogo screen via adb?
Click to expand...
Click to collapse
yes u can using the img file
follow this instructions to remove the warning instruction
http://www.bhudroid.com/2015/08/remove-unlocked-bootloader-warning-on.html

Kindly First Update yours boot loader Version
sudheerkk87 said:
Hello can any senior member plz help me out.
I have unlocked and rooted moto g2 2014 mobile it was working fine.
But I done a stupid thing by editing system file and overwriting it.
Then my phone stuck in boot loader
I can access recovery TWRP i tried to wipe Delvic and cache and factory resetting but it did'nt worked.
Therefore buy following the link i tried to flash with orginal frimware
www droidviewsmoto g 2014 to stock and lock the bootloader
it was not successful again it strucked in boot loop with Android dead symbol in recovery
------>> Then tried to install TWRP recovery it was successful, but unable to install super user.
There fore I tried to repeat the process buy using both sdk windows platfom tools and vfastboot
buy typing command in cmd as mfastboot.exe oem lock begin
and noticed error saying
hab check failed for boot
failed to verity hab image boot
failed to validate boot image
Plz sir can any one help me out plz
Click to expand...
Click to collapse
Kindly First Update yours boot loader Version
this can be the an issue
and after that cleanly flash the latest TWRP recovery
and Finally any Latest Build Custom Rom
this may Works

thnks .......
woow its working great . very simplest way thank u so much
bhu999 said:
heeey thanks 4 the reveiw hope i will come with other thread
Click to expand...
Click to collapse

Can I get OTA update after this ?
I just want to know can I get OTA update after this if Motorola roll out any update in the near future.

mudit56 said:
I just want to know can I get OTA update after this if Motorola roll out any update in the near future.
Click to expand...
Click to collapse
Yes

woow...
wow its working great for me... very simply to use ... am not face any bugs.......... thanks for your work:good:

@bhu999 Thanks it worked awesome.
one question can i get official OTA update from Motorola if i root my device now ??? Because for rooting custom recovery is required and it is impossible to get OTA while on custom recovery. Right ??

yes u can but with stock recovery
just flash the stock recovery to get the available update also
In One Click method u can get the official available update after completing the whole procedure

[Install image] Marshmallow 6.0 for XT 1097/XT1092

I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research before flashing it!
Click to expand...
Click to collapse
Here's the flashable image for andriod 6.0 on XT 1097/1092 devices, without the need to flash radio files to make it work with Indian networks (should work on other XT1092 devices) . Thanks to "Uchoaz10" who posted the image in thread - http://forum.xda-developers.com/moto-x-2014/development/rom-installation-rsd-t3263800 , rather than using RSD flash the image , you can use my custom made Batch file to flash the rom.
Unzip the image and flash fresh zip into one folder and follow below steps.
Instructions
1) Power off device
2) Boot to boot loader ( press power and Volume down for few seconds and let go)
3) connect to computer via USB
4) Run Flash fresh .bat file
5 ) Reboot device
Note : If your stuck in boot loop , reboot to bootloader and select recovery (press volume up) , do an factory reset and reboot.
Use this method to root - http://forum.xda-developers.com/moto-x-2014/development/root-root-moto-x-2014-android-t3249105 thanks to "Junior Passos"
Download links for Images:
1 - Google Drive: (Working link)
https://drive.google.com/file/d/0B4wmYm0bnkUANlRYR0JnRmdwNWM/view?usp=sharing
Update : Updated with ADB/fastboot in flash fresh zip

shouldn't this work on any Moto X 2014 with an unlocked BL?

munchy_cool said:
shouldn't this work on any Moto X 2014 with an unlocked BL?
Click to expand...
Click to collapse
The 6.0 OTA that got released was for brazil , to flash the OTA you had to convert your phone to XT 1097 first and then flash the OTA . When flashed the OTA , mobile network would not work till correct radios are flashed . With the above method you do not need to convert to XT 1097 or flash radios (atleast for carriers in India)

should I do anything extra if I have a XT1092 ? Just run the bat file?

Your download links are not working for me. Part of the links are replaced with "...".

notanoob said:
The 6.0 OTA that got released was for brazil , to flash the OTA you had to convert your phone to XT 1097 first and then flash the OTA . When flashed the OTA , mobile network would not work till correct radios are flashed . With the above method you do not need to convert to XT 1097 or flash radios (atleast for carriers in India)
Click to expand...
Click to collapse
I know that... But do you know where the check in the ota file is which prevents it from installing on 1092?
V8 pony it is

Funnnny said:
should I do anything extra if I have a XT1092 ? Just run the bat file?
Click to expand...
Click to collapse
yes follow the instructions and run the file
StillBrilliant said:
Your download links are not working for me. Part of the links are replaced with "...".
Click to expand...
Click to collapse
I posted links from the original post , ill upload the zip once i get home.
munchy_cool said:
I know that... But do you know where the check in the ota file is which prevents it from installing on 1092?
V8 pony it is
Click to expand...
Click to collapse
OTA will not get flashed if you try to flash the OTA using an non XT1097 device. Not sure where that check is , if i know that i would not have posted this

Would this work on European XT1092?

I'm also interested in updating my German Moto X XT1092.

aoleg said:
I'm also interested in updating my German Moto X XT1092.
Click to expand...
Click to collapse
FYI the exact same firmware works flawlessly on my retde 1092, I installed it through the TWRP backup though. No extra hassle, everything worked on first boot

Its working on my indian XT1092 ! , as accepted it shows the model as XT1097

Do I need an unlocked BL, root or custom recovery to flash this, or can i flash this on stock firmware 5.1, with locked bootloader

vibhor98 said:
Do I need an unlocked BL, root or custom recovery to flash this, or can i flash this on stock firmware 5.1, with locked bootloader
Click to expand...
Click to collapse
backup ! and give it a try!
actually I had unlocked BL and the stock recovery !

I have EU 1092, so after this update a will have 1097??

pepino34 said:
I have EU 1092, so after this update a will have 1097??
Click to expand...
Click to collapse
Exactly.

Does it need a stock recovery to work, or can I flash it with TWRP installed ?

It needs nothing but unlocked bootloader. You can flash via stock recovery. I just did it, and it works just fine. However, I had to do factory reset after installing it as too many apps were crashing. Dirty flash is no replacement for OTA update.

Well, I have just the opposite : I have TWRP installed, and I wanted to know if that was a problem.

You can just flash via fastboot. No recovery needed.
Sent from my iPad using Tapatalk

So, I took the jump and flashed the rom using your file. It seems to have worked just fine, even if right now, it's hanging on the app optimizing part.
Thanks anyway !

[Guide]Easiest and safest way to downgrade from 6.0 to 5.0

Here is what I did to downgrade from 6.0 to 5.0:
1- Download and Install all the required drivers
https://mega.nz/#!tENxTCYI!U_2KD352HgqqsK2qkY7g4xsUIVMhHwOol9aiiDMIs28
2- Download the asus flash tool 1.14
https://mega.nz/#!JF91lazI!lQSdQcN5YXIFsaCWtTVHfsvGK1u82NKvy8-X9XIfR0g
3- Download the Latest WW_ZE551ML_2.20.40.194_20160713.raw firmware [Mega Mirror]
https://mega.nz/#!MRtTCCzZ!c2qoqIX8drgNRy2KxPV_iiBVKHoW2ppFdwRUsLjIWq4
4- Use the ASUS flash tool to flash the raw image
-Double click the ASUS flash tool Icon to launch it
-reboot your phone on bootloader mode and connect it to your PC
-Choose your device from the list which is in ASUS flash tool
-Locate the raw image
-Click on the serial number which appears on the screen within ASUS flash tool
-Select wipe data
-Click the start button to start flashing
-Wait until you see the message successfully flashed
Note that the whole flashing process takes about 6 minutes.
Enjoy!

Reserved

Ended in error, with wrong image format or error 1

ended in "error: permission denied"

This tutorial won't work, already tried this before when i'm thinking of reverting from MM Beta back to LP Stock, somewhere i've found a post that worked for me, all credits to @BlackForward
BlackForward said:
Hi, I do not speak English very well, but I'll try.
First go to the website of Asus, and download the firmware .. 184 or this link (http://dlcdnet.asus.com/pub/ASUS/Ze...user.zip?_ga=1.147549438.850793534.1463019251) and put the external SD Card!!!
NOTE: If your bootloader is similar to the image (with the blue letters ..), you just need to step 3 of this my turorial
ht*tp://www*androidheadlines*com/wp-content/uploads/2015/05/asus-zenfone-2-google-howto-1.jpg (remove "*" again^^)
1. Go to this page (https://www.techmesto.com/root-zenfone-2/) and follow the steps of the second method..
1.1 Download Z00A_WW_2.20.40.184 version (https://mega.co.nz/#F!k4MHiAgL!dVuOKeH3eokcwPSNI79ffw)
1.2 Download and extract FlashTools (http://forum.xda-developers.com/attachment.php?attachmentid=3301263&d=1431011927)
1.3 Extract Z00A_WW_2.20.40.184_system_w_root.zip (for step 1.1) and put the "system.img" in the folder of FlashTools together with "boot.img", "droidboot.img" and "recovery.img"
2. Now follow the steps of the second method (https://www.techmesto.com/root-zenfone-2/), from step 7 to 11;
3. Also I was stuck in the bootloader after this procedure... BUT, you need to download this file (the first method): http://www.mediafire.com/download/v6m7n9j0gqins9b/CWM_Zenfone_2_Intel.zip;
3.1 And follow the steps from 1 to 9 (the first method): https://www.techmesto.com/root-zenfone-2/... EXCEPT: The steps include the root (you do not need the root ..)
3.2 When you are already in CWM recovery, only install the firmware 184 (of start.. of Asus) which is in the external SD Card ... and end ^^.
3.3 I recommend wipe data / factory after starting the device first time...
I have helped
Click to expand...
Click to collapse

If you end up bricked
.and you didn't do any crazy cmds in fastboot mode.
Check my signature

I had been running the MM beta up until this point. I just flashed the .184 RAW file. What made me go back you ask? I figured out that Google Opinion Rewards was not working. I can't live without that.

I can confirm that this method works for ZE550ML on mm beta .69 firmware. I downloaded AFT and flash RAW (Lollipop .149 firmware). Successfully downgraded bootloader unlocked and flashed CM13.
P.S. My status before downgrade was unrooted and bootloader locked and was on .69 mm beta build.

Raiden01 said:
I can confirm that this method works for ZE550ML on mm beta .69 firmware. I downloaded AFT and flash RAW (Lollipop .149 firmware). Successfully downgraded bootloader unlocked and flashed CM13.
P.S. My status before downgrade was unrooted and bootloader unlocked and was on .69 mm beta build.
Click to expand...
Click to collapse
How did you unlock on .69 build?

HungNgocPhat said:
How did you unlock on .69 build?
Click to expand...
Click to collapse
I found a one click bootloader unlock from xda. I downgraded to lollipop .149 firmware and the unlocked bootloader.
Here's the link for unlocking bootloader on lollipop
http://forum.xda-developers.com/zenfone2/general/tool-one-click-bootloader-unlock-root-t3155884
Also there's a method by shakalaca to unlock bootloader in mm beta. I haven't tried it personally because many report that their phones got bricked and most of them could be recovered by xFSTK method.

http://image.prntscr.com/image/734e565caff14053b6a9a0a394b3cddc.png
Error while flashing it, then "permission denied"

Yousvel said:
3- Download the latest raw image WW_ZE551ML_2.20.40.184_20160504.raw
https://yadi.sk/d/4cuw246vryaZA
Click to expand...
Click to collapse
The link for the raw file is dead. Here's another. Same version.
https://www.yadi.sk/d/sw4DS-n3sZtcr

returned4good said:
The link for the raw file is dead. Here's another. Same version.
https://www.yadi.sk/d/sw4DS-n3sZtcr
Click to expand...
Click to collapse
Thanks bro! OP is updated with this new link.

Yousvel said:
Thanks bro! OP is updated with this new link.
Click to expand...
Click to collapse
No problem. It was actually a difficult search. Maybe a mod can add it to the Resources thread.

returned4good said:
No problem. It was actually a difficult search. Maybe a mod can add it to the Resources thread.
Click to expand...
Click to collapse
I will upload the latest raw image version .94 soon

Work for me. OTA works to.
Thx!!!

rafaelcremm said:
Work for me. OTA works to.
Thx!!!
Click to expand...
Click to collapse
Thanks for your feedbacks.

OP updated with the latest WW_ZE551ML_2.20.40.194_20160713.raw firmware [Mega Mirror]

Will this work if I unlocked my phone using this? http://forum.xda-developers.com/zenfone2/general/unlock-zenfone2-android-6-0-beta-unlock-t3411264

Yousvel said:
OP updated with the latest WW_ZE551ML_2.20.40.194_20160713.raw firmware [Mega Mirror]
Click to expand...
Click to collapse
Please, remember to press the thanks button if this is helpful to you.

Close to throwing it from a plane into a vulcano.

Hi guys.
So my P8 Lite (ALE-L21) won't connect to wifi.
I changed like 30 versions of android via fast boot, even bricked it once, but nothing fixed the thing.
I'm looking forward to install 6.0 on a hard flash
The thing is, how would I do that? Because updates come in an .app file, which if you extract you get the boot,system,recovery all that but I have no ideea how to make a .zip file out of it, considering I think it needs some sort of a file that tells the recovery thing how to install the system.
Can someone help, please?
PS. I am also into the balong bull**** (can't post images yet)

can you make it more clear ? bcz I didn't get what you really want to say here

AmINoS007 said:
can you make it more clear ? bcz I didn't get what you really want to say here
Click to expand...
Click to collapse
Long story short, I want to update this thing to 6.0 via TWRP and I have no clue how to make a flashable zip xD

bughysnk said:
Long story short, I want to update this thing to 6.0 via TWRP and I have no clue how to make a flashable zip xD
Click to expand...
Click to collapse
aha , well, it's simple , you can download sokobban B574 deodexed rom , it's marshmallow with a lot of other features included and it's a twrp backup so you can flash via TWRP
There are other roms too you can flash whatever you like
here is the link : http://huaweip8lite.blogspot.com/

AmINoS007 said:
aha , well, it's simple , you can download sokobban B574 deodexed rom , it's marshmallow with a lot of other features included and it's a twrp backup so you can flash via TWRP
There are other roms too you can flash whatever you like
here is the link : removed
Click to expand...
Click to collapse
This thing is asking for the stock 6.0 installed, but I have the 5.1

some say if you don't risk you don't win. it may work if you come from 5.1 ,not sure about it but you can try. since it needs to wipe system,dalvik,cache,internal storage it may work. but keep in mind ' MAY ' . if you dont wanna risk , google might be your answer. download a stock 5.1 rom with update.app and search for a tool to unzip the update.app file ( it contains system.img , recovery.img and all the things you need). after you unzip it you have to flash them with adb. to get rid of balong you will need the vendor file,dont know where it is exactly but it should be somewhere here in the forum(take a look at the guides here). once you are done with balong you can try to update it to 6.0 . goodluck
note: update.app extractor

Firicel69 said:
some say if you don't risk you don't win. it may work if you come from 5.1 ,not sure about it but you can try. since it needs to wipe system,dalvik,cache,internal storage it may work. but keep in mind ' MAY ' . if you dont wanna risk , google might be your answer. download a stock 5.1 rom with update.app and search for a tool to unzip the update.app file ( it contains system.img , recovery.img and all the things you need). after you unzip it you have to flash them with adb. to get rid of balong you will need the vendor file,dont know where it is exactly but it should be somewhere here in the forum(take a look at the guides here). once you are done with balong you can try to update it to 6.0 . goodluck
note: -deleted- update.app extractor[/URL]
Click to expand...
Click to collapse
I'll give it a shot, dunno tho. As you said I have to get rid of the balong yet

bughysnk said:
I'll give it a shot, dunno tho. As you said I have to get rid of the balong yet
Click to expand...
Click to collapse
get buildprop editor. u will see your devices as hisft*** change everything to ALE-L21 where you see the that hisft. 1 wont change.after you changed everything restart your phone. worked for me.

Ok so eventually after so many nerves I got to the Sokkoban but my wifi still doesn't work *sigh*
Network acces denied...

htc m9+ stock recovery india 6.0.1 ?

To be honest I'm a noob ,but messing around with my phone I rooted my phone accidentally with kingroot n kingoroot and later unrooted clearing su and also busybox .recently that is on 1 October HTC released an OTA of Android 6.0.1 for Indian customers but when I downloaded and started installing it, it fluently went till 25% but then it completely stopped and rolled back to normal state , I guess this is because I rooted and hence few system files might have been modified
My questions
1) can I remove the modified files so that I can install the OTA
2) how to install stock recovery version (5.0.2)from htcden because the kernel file is not in zip format ,and please mention step by step procedure to do so if there is any
3)if Incase I re install the stock recovery will I be able to receive OTA again ?
NOTE :BOOTLOADER IS LOCKED AND S_ON .SO I DONT KNOW HOW TO INSTALL STOCK IMAGE
Build Fingerprint of now htc asia wwe :5.0.2
Kernel version : 3.10.61
Build number 1.90.707.3.

djrawkar007 said:
To be honest I'm a noob ,but messing around with my phone I rooted my phone accidentally with kingroot n kingoroot and later unrooted clearing su and also busybox .recently that is on 1 October HTC released an OTA of Android 6.0.1 for Indian customers but when I downloaded and started installing it, it fluently went till 25% but then it completely stopped and rolled back to normal state , I guess this is because I rooted and hence few system files might have been modified
My questions
1) can I remove the modified files so that I can install the OTA
2) how to install stock recovery version (5.0.2)from htcden because the kernel file is not in zip format ,and please mention step by step procedure to do so if there is any
3)if Incase I re install the stock recovery will I be able to receive OTA again ?
NOTE :BOOTLOADER IS LOCKED AND S_ON .SO I DONT KNOW HOW TO INSTALL STOCK IMAGE
Build Fingerprint of now htc asia wwe :5.0.2
Kernel version : 3.10.61
Build number 1.90.707.3.
Click to expand...
Click to collapse
extract the downloaded ota update on you pc and use winrar to unzip it..you will find a file named "recovery-verified" . That is your stock recovery.

ysolanki1 said:
extract the downloaded ota update on you pc and use winrar to unzip it..you will find a file named "recovery-verified" . That is your stock recovery.
Click to expand...
Click to collapse
I have downloaded the kernel source from htcdev when I extracted it there is recovery verified files inter there are two more .tra zip files .what to do now?

djrawkar007 said:
I have downloaded the kernel source from htcdev when I extracted it there is recovery verified files inter there are two more .tra zip files .what to do now?
Click to expand...
Click to collapse
which kernel have you downloaded? can you send me a link..
and the recovery verified file will have a .img extension so use that to flash to your phone.

heeeelp
ur problem fixed or not because i have same and i can't fix it