Start Up Fail while installing rom - Verizon Samsung Galaxy S7 Edge Questions & Answers

Ok guys I just recently rooted my first phone. All was well until I tried to install my first ROM. It seemed to be going fine until I got a Screen that said "start up fail" and in small red text at the top it said "Custom Binary Blocked By Secure Boot (Boot. img)" Here is a picture of the screen: http://imgur.com/a/DQ62P
Here is the link to the ROM: http://forum.xda-developers.com/verizon-s7-edge/development/stang5litre-edition-5-0-s7e-t3450208
Any Ideas on what I can do to fix this?

Dizzy.Dylan said:
Ok guys I just recently rooted my first phone. All was well until I tried to install my first ROM. It seemed to be going fine until I got a Screen that said "start up fail" and in small red text at the top it said "Custom Binary Blocked By Secure Boot (Boot. img)" Here is a picture of the screen: http://imgur.com/a/DQ62P
Here is the link to the ROM: http://forum.xda-developers.com/verizon-s7-edge/development/stang5litre-edition-5-0-s7e-t3450208
Any Ideas on what I can do to fix this?
Click to expand...
Click to collapse
Anyone got any ideas on what to do?

Dizzy.Dylan said:
Anyone got any ideas on what to do?
Click to expand...
Click to collapse
I had a similar occurrence while using FlashFire when I accidentally hit the EverRoot option. You'll have to put it into download mode and ODIN a stock ROM onto it. Then ROOT and upgrade as usual being careful not to hit the EverRoot. Hope it helps.

otterdad said:
I had a similar occurrence while using FlashFire when I accidentally hit the EverRoot option. You'll have to put it into download mode and ODIN a stock ROM onto it. Then ROOT and upgrade as usual being careful not to hit the EverRoot. Hope it helps.
Click to expand...
Click to collapse
I never hit EverRoot and I've tried it twice now and still havent gotten it to work Could it be something to do with the firmware?

Hey man, sorry to hear about this, I'm not exactly sure your problem, but I guess I would start by re-flashing the ENG Boot for your device (via Odin) - assuming that's the root method you used (you can find it here if you haven't got it elsewhere) Otherwise you could flash your device's stock firmware via Odin and then you could try following this guide here for rooting, and retry everything, which is what I would recommend.
I used that guide for my brother's SM-G935V and it has worked "flawlessly", I haven't tried installing a ROM on it yet but it should work as long as the ROM itself works, - I say "flawlessly" because there are a few issues with rooting this phone, but you can easily work around all of them.
I would recommend explaining and detailing your problem as much as you possibly can, in this post and in future posts, so that you can get as much help as possible.. if you need any clarification on anything, let me know, and be careful, for your first phone experimenting ,there's a lot of sh** that can go wrong! Keep in mind that you can fix most problems by flashing your stock firmware with Odin if all else fails.
Best of luck to you, let me know how it goes.

Related

[Q] Someone please help!!!

ok i recently got a european open to all networks samsung galaxy tab,
now i decided to install a custom rom last night with horrible results, my phone is now stuck on the samsung boot screen and will not load properly,
here are the steps i took that ended me up in this mess,
i installed rom manager from android market,
then installed clockwork mod from inside rom manager, following the exact steps i was given but heres where i think i went wrong,
at some point it asked u back up everything onto an sd card, now i thought i had an sd inside it already but i didnt and thats what i think caused all the trouble,
i backed up all my files anyway onto the internal memory b4 goin into recovery mode, after completely wiping the phone as it saids u shud do, i then proceeded to load the modaco rom that i had installed into the "download" section of my memory and thats where it said the exact following words....
Checking /system...
E: failed to mount /system (invalid argument)
/system may be rfs. checking...
checking /date...
checking /database...
checking /cache...
filesystems need to be converted to ext4.
a backup and restore will now take place.
if anything goes wrong, your backup will be named before-ext4-convert-1297008631. try restoring it incase of error.
E:failed to mount /sdcrard (no such file or directory)
now i've tried restoring it and backing it up but all it repeats is the same thing, i know i messed up but now all i want to know is how can i fix it?
please any help would be much appreciated.
KingofXings said:
ok i recently got a european open to all networks samsung galaxy tab,
now i decided to install a custom rom last night with horrible results, my phone is now stuck on the samsung boot screen and will not load properly,
[..]
now i've tried restoring it and backing it up but all it repeats is the same thing, i know i messed up but now all i want to know is how can i fix it?
please any help would be much appreciated.
Click to expand...
Click to collapse
A brandnew start from scratch with Odin and repartioning with the rom from Rotohammer JMIv1.0 or v2.0 wouldt be my advice. You need the pit-file as well. Can be found on his server.
Heppieboeddah said:
A brandnew start from scratch with Odin and repartioning with the rom from Rotohammer JMIv1.0 or v2.0 wouldt be my advice. You need the pit-file as well. Can be found on his server.
Click to expand...
Click to collapse
ok ive downloaded odin v4.03, downloaded the original samsung firmware version P1000XWJJ3.rar from this website and downloaded the european P1_EUR.pit file also but i'll be honest i'm very new to the android world and dont have a clue what to do from here, how do i repartion the rotohammer rom?
i know i'm gonna sound stupid but if u could please explain it step by step i would be very grateful, thank you
Read the following thread that explains how to flash Rotohammer JMI ROM
http://forum.xda-developers.com/showthread.php?t=939360
Give it a good read and then ask if you have any questions before you start the process again.
KingofXings said:
ok ive downloaded odin v4.03, downloaded the original samsung firmware version P1000XWJJ3.rar from this website and downloaded the european P1_EUR.pit file also but i'll be honest i'm very new to the android world and dont have a clue what to do from here, how do i repartion the rotohammer rom?
i know i'm gonna sound stupid but if u could please explain it step by step i would be very grateful, thank you
Click to expand...
Click to collapse
First extract the P1000XWJJ3.rar. You shouldt be left with a single tar-file?! If so
Well if you have the right files. Start Odin. On the left you see the option 'repartion', tick that box. On the left you see pit. Tick that box and load the pit-file. Tick the box PDA and load the tar.file you extracted.
Start the tablet in download modus and attach it to youre pc. You shouldt see on top left a yellow box. Then just press start in Odin
beware that all on yore tablet will be deleted.
here is a very good guide with pictures.
http://leemn.wordpress.com/2011/01/25/galaxy-tab-flashing-a-new-rom-rotohammer-jme/
Heppieboeddah said:
First extract the P1000XWJJ3.rar. You shouldt be left with a single tar-file?! If so
Well if you have the right files. Start Odin. On the left you see the option 'repartion', tick that box. On the left you see pit. Tick that box and load the pit-file. Tick the box PDA and load the tar.file you extracted.
Start the tablet in download modus and attach it to youre pc. You shouldt see on top left a yellow box. Then just press start in Odin
beware that all on yore tablet will be deleted.
here is a very good guide with pictures.
......ok i followed the steps from above which was to install the Roto JMI Pre-Rooted Firmware v2 it got me pass the boot screen and everything on the tab works except it wont let me make phone calls, everything else works but it picks up no network and when i enter into settings it wont even let me access it?? almost like this is a wifi only rom ive installed??
what do i do from here to get it back to a phone?
Click to expand...
Click to collapse
KingofXings; said:
......ok i followed the steps from above which was to install the Roto JMI Pre-Rooted Firmware v2 it got me pass the boot screen and everything on the tab works except it wont let me make phone calls, everything else works but it picks up no network and when i enter into settings it wont even let me access it?? almost like this is a wifi only rom ive installed??
what do i do from here to get it back to a phone?
Click to expand...
Click to collapse
Ok great. at least you got it working again....
Now you need to flash the baseband-modem that you can find in the download link below. Flash it in Odin. Uncheck repartion. Check 'phone' and load the modemfile you downloaded. Its a tar.file. Leave it as it is. Then press start and the baseband will be installed.
Then you have to set-up the APN from youre telecom-provider and you will be up and running.....
http://forum.xda-developers.com/showpost.php?p=11148313&postcount=129
Heppieboeddah said:
Ok great. at least you got it working again....
Now you need to flash the baseband-modem that you can find in the download link below. Flash it in Odin. Uncheck repartion. Check 'phone' and load the modemfile you downloaded. Its a tar.file. Leave it as it is. Then press start and the baseband will be installed.
Then you have to set-up the APN from youre telecom-provider and you will be up and running.....
ok i downloaded the p100-radio-xxjmf.tar file and followed the instructions u gave but it failed and said this message...
<ID:0/004> set up connection.
<ID:0/004> cant open the serial (COM) port.
OSM All threads completed ( succeeded 0/ failed 1)
i dont understand why it would say that, could it be cos the .tar is xxjmf and the Rom by roto uses jmi? u think u could help? thanks again honestly, you've been a life saver.
Click to expand...
Click to collapse
Ok i just changed the usb ports and it works perfectly, the phone is back online and i didnt even have to fiddle with the apn settings, 3G just works fine,
thank you so much for ur help, i couldnt of done any of this without u, if ur ever around in north west london, u got a drink on me lol
KingofXings said:
Ok i just changed the usb ports and it works perfectly, the phone is back online and i didnt even have to fiddle with the apn settings, 3G just works fine,
thank you so much for ur help, i couldnt of done any of this without u, if ur ever around in north west london, u got a drink on me lol
Click to expand...
Click to collapse
Good to read youre up and running again...
Cheers....
Heppieboeddah said:
Good to read youre up and running again...
Cheers....
Click to expand...
Click to collapse
Hey mate, seems I am in a similar predicament here. Just 2 days back I flashed my Tab to Roto JMI v2 from a stock Asian firmware (DDJK3 I suppose) due to a bad Modaco flash that went really bad. Wiped off my data from god knows what areas. Now I am facing an issue that I am not able to understand or solve.
I was using Titanium Backup to remove a system app without Chuck Norris mode, which meant I had to reboot device and it would delete it OS level and say reboot to system. But once I click on reboot system an Exclamation mark just comes across the screen and NOW I CAN'T BOOT INTO my system. neither to i see the options it was earlier showing me upon Pwer + Vol Key up. The only option left for me is to reflash it using Odin.
Any Ideas mate? Reflashing again and again is not the solution right?
Thanks & Cheers!
sahildeswal said:
Hey mate, seems I am in a similar predicament here. Just 2 days back I flashed my Tab to Roto JMI v2 from a stock Asian firmware (DDJK3 I suppose) due to a bad Modaco flash that went really bad. Wiped off my data from god knows what areas. Now I am facing an issue that I am not able to understand or solve.
I was using Titanium Backup to remove a system app without Chuck Norris mode, which meant I had to reboot device and it would delete it OS level and say reboot to system. But once I click on reboot system an Exclamation mark just comes across the screen and NOW I CAN'T BOOT INTO my system. neither to i see the options it was earlier showing me upon Pwer + Vol Key up. The only option left for me is to reflash it using Odin.
Any Ideas mate? Reflashing again and again is not the solution right?
Thanks & Cheers!
Click to expand...
Click to collapse
Well, first of all. Removing system app ad hoc is not really clever to do. But you cant get into the recovery so you are able to clear cache and do a factory-reset? Volume-up+Power on and holding the volume-upbutton untill you get into the recovery?
If not you have to reflash from scratch with Odin. Use the pit/file and check repartion.

[Q] "Firmware upgrade encountered an issue ....."

Hi there ... yes I've done something wrong and would like to try to fix it without going to Vodafail to get them to berate me.
I was trying to install PhilZ Touch recovery but was having trouble with Odin (1.85, and 3.07 I was trying) and finally gave up and just wanted to make a normal boot but the dreaded firmware message has come up.
I've had a quick search & read and it seems that I need to flash (with Odin) a new stock ROM.
It's getting late here so I'm not going to try anything more without a lot of advice and reading.
So any suggestions please?
I'm in Australia with Vodafone, phone is about two or three months old. i9505.
Cam you get into download mode? Turn it off then press home, power and volume down at the same time, if you can download a stock firmware for your device this can be found at Sam mobile. Then flash it with Odin. Always use the latest version.
Sent from my GT-I9500 using Tapatalk 4 Beta
BillzillaAus said:
Hi there ... yes I've done something wrong and would like to try to fix it without going to Vodafail to get them to berate me.
I was trying to install PhilZ Touch recovery but was having trouble with Odin (1.85, and 3.07 I was trying) and finally gave up and just wanted to make a normal boot but the dreaded firmware message has come up.
I've had a quick search & read and it seems that I need to flash (with Odin) a new stock ROM.
It's getting late here so I'm not going to try anything more without a lot of advice and reading.
So any suggestions please?
I'm in Australia with Vodafone, phone is about two or three months old.
Click to expand...
Click to collapse
Hi,
Stock firmwares are HERE
Try ODIN 3.04 as well
Thanks guys, I'm downloading http://www.hotfile.com/dl/227186782/ebf4c32/I9505XXUBMEA_I9505XSABME4_XSA.zip.html now and will try it when it's finished.
And yes the phone will go into download mode okay.
I also had a think about it last night and I'm not against putting a different ROM into it, any suggestions?
Okay trying to flash that rom with Odin failed.
Where do I go from here please? Like I mentioned, I'm more than happy to try a custom rom.
Hmmmm just tried flashing CWM recovery ..... that failed as well.
Help!!
Know its probably a stupid question but did you root the phone before trying to install Phillz recovery?
If not, try CF-Autoroot, then try Phillz recovery. If you can't get these flashed you may have corrupted your partition table. Here's a link to the PIT file you need - http://forum.xda-developers.com/showthread.php?t=2265477 (Make sure you get the right one or you can say bye bye to your toy- I believe you should have an I9505)
Read this, then go and try again....
Cheers.... :good:
ultramag69 said:
Know its probably a stupid question but did you root the phone before trying to install Phillz recovery?
If not, try CF-Autoroot, then try Phillz recovery. If you can't get these flashed you may have corrupted your partition table. Here's a link to the PIT file you need - http://forum.xda-developers.com/showthread.php?t=2265477 (Make sure you get the right one or you can say bye bye to your toy- I believe you should have an I9505)
Read this, then go and try again....
Cheers.... :good:
Click to expand...
Click to collapse
Yep I flashed CF-Autoroot a couple of months ago without too many problems, I'll try it again.
Which version of Odin should be best to use?
Ah! Flashing the pit file thingy did it, THANKS!!!
BillzillaAus said:
Ah! Flashing the pit file thingy did it, THANKS!!!
Click to expand...
Click to collapse
No problem, just remember though that flashing the pit file is no small thing... If that stuffs up or you have a corrupt pit file you can actually hard brick your device... It really is the final step before giving it back to Samsung to fix...
Glad it all worked out and cheers....:good:
Yes I'll try to not need to do that again!

[Q] Soft Bricked my S4

Hello,
I've been reading as much regarding this issue before I've posted this thread. Please don't attack me because of my lack of knowledge, I'm trying. Thanks.
I recently rooted and installed a custom rom on my SGH-I337, Slimrom was the name of the rom. It worked perfectly, until I decided to upgrade the rom version. I downloaded the update on my phone, rebooted to recovery and flashed the zip. Rebooted my phone, and I'm stuck in a boot loop. No Logo, No recovery, I do have download mode.
I had read that odin flashing the stock rom would fix my issue, so I had done that. I flashed I337UCUAMDL_I337ATTAMDL_ATT successfully. Odin auto-rebooted....to a boot loop. No recovery, No image on my screen while charging, etc.
I had also read that odin flashing TWRP might fix the soft brick I'm experiencing, I downloaded the latest .img from TWRP and converted it to a tar using Cygwin. Attempted to flash it to have Odin tell me it failed.
Does anyone have any idea's or advice how I could get back to a working environment recovery?
Thank you for your time reading this.
tr10 said:
Hello,
I've been reading as much regarding this issue before I've posted this thread. Please don't attack me because of my lack of knowledge, I'm trying. Thanks.
I recently rooted and installed a custom rom on my SGH-I337, Slimrom was the name of the rom. It worked perfectly, until I decided to upgrade the rom version. I downloaded the update on my phone, rebooted to recovery and flashed the zip. Rebooted my phone, and I'm stuck in a boot loop. No Logo, No recovery, I do have download mode.
I had read that odin flashing the stock rom would fix my issue, so I had done that. I flashed I337UCUAMDL_I337ATTAMDL_ATT successfully. Odin auto-rebooted....to a boot loop. No recovery, No image on my screen while charging, etc.
I had also read that odin flashing TWRP might fix the soft brick I'm experiencing, I downloaded the latest .img from TWRP and converted it to a tar using Cygwin. Attempted to flash it to have Odin tell me it failed.
Does anyone have any idea's or advice how I could get back to a working environment recovery?
Thank you for your time reading this.
Click to expand...
Click to collapse
when you flashed the rom update, did you do any sort of wipe as well?
when you flash the stock firmware via odin, you have to boot into the stock recovery afterwards and wipe data/factory reset to complete the process or you will be unable to continue. you may want to try that process again.
xBeerdroiDx said:
when you flashed the rom update, did you do any sort of wipe as well?
when you flash the stock firmware via odin, you have to boot into the stock recovery afterwards and wipe data/factory reset to complete the process or you will be unable to continue. you may want to try that process again.
Click to expand...
Click to collapse
Thank you for the speedy response.
When I originally flashed the rom update, I did NOT wipe anything.
When I flashed stock firmware, I could not get into stock recovery via three buttons.
Thank you.
tr10 said:
Thank you for the speedy response.
When I originally flashed the rom update, I did NOT wipe anything.
When I flashed stock firmware, I could not get into stock recovery via three buttons.
Thank you.
Click to expand...
Click to collapse
Pull the battery, put it back in and try recovery again.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
Pull the battery, put it back in and try recovery again.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Thank you for the advice, I have done that countless times. I'm hoping that it changes one of these times though.
I took your advice regarding re-flashing the image and ticking the bootloader update option, odin stated it was successful and auto-rebooted. I pulled the battery and tried to enter recovery, no cigar.
Perhaps try the Heimdall route: http://forum.xda-developers.com/showthread.php?t=2374441
When attempting to flash TWRP recovery, my phone says in the top right hand corner:
Odin Mode
Product name: SGH-I337
Current Binary: Samsung Official
System Status: Custom
CSB-OEM_CONFIG_LSB: 0x30
WRITE PROTECTION: Enabled
START [224, 1440]
SECURE CHECK FAIL: recovery
Don't know what that means.
I haven't tried the heimdall method yet, not sure if I wanna give it a shot because it seems a lot more complex only to accomplish the same thing odin would. I can imagine something is stopping odin from putting a bootloader, or kernel. That same thing would stop heimdall. But, I have no idea what I'm talking about. Waiting to hear more advice before I make the hole I dug deeper.
Thank you for your time guys.
Try flashing the loki patched recovery from this thread. Link is in OP.
http://forum.xda-developers.com/showthread.php?t=2322682
Just extract the img and make it a odin file.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
After flashing stock via Odin, when you use the 3 button combo to access recovery, are you releasing just the power button when the device vibrates?
Febby said:
Try flashing the loki patched recovery from this thread. Link is in OP.
http://forum.xda-developers.com/showthread.php?t=2322682
Just extract the img and make it a odin file.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
Thank you for the advice Febby, I have downloaded the file you suggested. This was actually the first recovery I had when I had tried to update my rom version. I converted it successfully to a tar and attempted to odin it over to my phone. I'm receiving the same error I had earlier, Secure Check Fail: Recovery.
Thank you for the suggestion though, as I think this is in the right direction of what I need to do, I don't know how to get past that secure check though.
xBeerdroiDx said:
After flashing stock via Odin, when you use the 3 button combo to access recovery, are you releasing just the power button when the device vibrates?
Click to expand...
Click to collapse
Correct, I am.
I am receiving absolutely no image on my screen other than when I enter Download mode.
Thank you for the suggestion.
tr10 said:
Thank you for the advice Febby, I have downloaded the file you suggested. This was actually the first recovery I had when I had tried to update my rom version. I converted it successfully to a tar and attempted to odin it over to my phone. I'm receiving the same error I had earlier, Secure Check Fail: Recovery.
Thank you for the suggestion though, as I think this is in the right direction of what I need to do, I don't know how to get past that secure check though.
Correct, I am.
I am receiving absolutely no image on my screen other than when I enter Download mode.
Thank you for the suggestion.
Click to expand...
Click to collapse
damn im sorry it didn't work. Samsung is just making this device more and more unpleasant to own. I actually considered switching to a ONE today.
You can always try exchanging it via att warranty (free).
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Indeed the "easiest" way to correct this would be via a warranty claim... but would take a couple days.
Otherwise, when you said "updated the ROM" ... How did you go about updating it? I assume you downloaded a .zip from the forums here, and installed it through recovery. But if you somehow, by some miracle, managed to download the MF3 update OTA... that would explain many things.
Also, there's an MDL recovery located over in this post. It's odin-flashable, and works on my device pretty well. Maybe it will get you back to at least having a recovery?
Also, Odin will reject the installation of TWRP like that. Tried it myself once.
Febby said:
damn im sorry it didn't work. Samsung is just making this device more and more unpleasant to own. I actually considered switching to a ONE today.
You can always try exchanging it via att warranty (free).
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
No no, no need to apologize, I have been looking in the ONE as well haha, but I'm already looped into two years, so its probably not going to happen. I have a tiny cracked screen so they won't allow me to exchange it. =( Thank you for your ideas though!
Aou said:
Indeed the "easiest" way to correct this would be via a warranty claim... but would take a couple days.
Otherwise, when you said "updated the ROM" ... How did you go about updating it? I assume you downloaded a .zip from the forums here, and installed it through recovery. But if you somehow, by some miracle, managed to download the MF3 update OTA... that would explain many things.
Also, there's an MDL recovery located over in this post. It's odin-flashable, and works on my device pretty well. Maybe it will get you back to at least having a recovery?
Also, Odin will reject the installation of TWRP like that. Tried it myself once.
Click to expand...
Click to collapse
Correct, I did update my rom via a zip file, I'm pretty sure it wasn't a MF3 update as I am familiar with the problems that's been causing.
http://www.slimroms.net/index.php/d...mo/3774-slim-d2att-4-2-2-build-7-5-weekly-596
That would be the link to the exact download I tried to update too.
I'll give that a shot with your link and let you know.
Thanks again guys.
EDIT: Tried the MDL Recovery, No Cigar. Though that thread is pretty interesting, gonna give it a read when I have the time. I need to get out of the house, this problem is driving me bonkers. Thank you guys very much for your advice and support, I would have went crazy hours ago if it wasn't for the intelligence provided by this forum.
Hey, don't despair! Last time I was here I used Odin to reflash my stock firmware, and also the stock kernel. Did you try reflashing the stock kernel yet? That got me right out of it.
Strange that you can't get into any sort of recovery menu.
Te3k said:
Hey, don't despair! Last time I was here I used Odin to reflash my stock firmware, and also the stock kernel. Did you try reflashing the stock kernel yet? That got me right out of it.
Strange that you can't get into any sort of recovery menu.
Click to expand...
Click to collapse
Does kinda sound like a kernel problem, I think... Might try just flashing to Kernel to see if it gets any further. You could do that via Heimdall (if you have it setup), or by modifying a copy of the MDL Odin package (e.g. delete everythine but the "boot.img" kernel file, and remove the .md5 extension).
I hope your break is refreshing.
Febby said:
I actually considered switching to a ONE today.
Click to expand...
Click to collapse
that would be the worst mistake of your life. my wife has a One. stock, its like an iphone. rooted, there isnt 10% of the activity/development in the One boards that there are here so that makes life with a rooted htc device even more boring than a regular day with an htc device.
Aou said:
Does kinda sound like a kernel problem, I think... Might try just flashing to Kernel to see if it gets any further. You could do that via Heimdall (if you have it setup), or by modifying a copy of the MDL Odin package (e.g. delete everythine but the "boot.img" kernel file, and remove the .md5 extension).
I hope your break is refreshing.
Click to expand...
Click to collapse
What I did is just google around for my stock kernel, which came in a .TAR file, and was immediately Odin-flashable. That might be even easier.
Te3k said:
What I did is just google around for my stock kernel, which came in a .TAR file, and was immediately Odin-flashable. That might be even easier.
Click to expand...
Click to collapse
Either way. Also, if one fails, try the other of course.
Te3k said:
What I did is just google around for my stock kernel, which came in a .TAR file, and was immediately Odin-flashable. That might be even easier.
Click to expand...
Click to collapse
I converted the .img to a .tar and I sadly had the same results =( Thank you for the idea though, definitely helped.
Aou said:
Does kinda sound like a kernel problem, I think... Might try just flashing to Kernel to see if it gets any further. You could do that via Heimdall (if you have it setup), or by modifying a copy of the MDL Odin package (e.g. delete everythine but the "boot.img" kernel file, and remove the .md5 extension).
I hope your break is refreshing.
Click to expand...
Click to collapse
Thank you, I attempted to reflash the stock kernel included in the MDL package. No avail. Same problem. Good advice though!
Te3k said:
Hey, don't despair! Last time I was here I used Odin to reflash my stock firmware, and also the stock kernel. Did you try reflashing the stock kernel yet? That got me right out of it.
Strange that you can't get into any sort of recovery menu.
Click to expand...
Click to collapse
I just reflashed the stock kernel, no cigar =( It is very strange to me that I can't get the phone to respond to anything other than download mode. Especially considering that I odin'd to stock. I'm starting to think I made it worse by going back to stock after flashing slimbean's weekly update.
Thank you for your time guys, keep the ideas coming, I'm definitely trying to come up with my own ideas.
I have so far done the following:
Odin'd MDL, MDB, Stock Kernel, Stock Recovery (All through download mode, as I don't have access to recovery.)
I've also tried to odin TWRP but I fail in Odin since download mode blocks the illegal recovery.
Thank you again for your time.
tr10 said:
No no, no need to apologize, I have been looking in the ONE as well haha, but I'm already looped into two years, so its probably not going to happen. I have a tiny cracked screen so they won't allow me to exchange it. =( Thank you for your ideas though!
Correct, I did update my rom via a zip file, I'm pretty sure it wasn't a MF3 update as I am familiar with the problems that's been causing.
http://www.slimroms.net/index.php/d...mo/3774-slim-d2att-4-2-2-build-7-5-weekly-596
That would be the link to the exact download I tried to update too.
I'll give that a shot with your link and let you know.
Thanks again guys.
EDIT: Tried the MDL Recovery, No Cigar. Though that thread is pretty interesting, gonna give it a read when I have the time. I need to get out of the house, this problem is driving me bonkers. Thank you guys very much for your advice and support, I would have went crazy hours ago if it wasn't for the intelligence provided by this forum.
Click to expand...
Click to collapse
Im not so sure how everyone just over looked this but the rom in that link is for the att S3. So you flashed an S3 rom to your S4.
D2att is the s3 for att.
Jflteatt is the att variant.
http://www.slimroms.net/index.php/downloads/all/viewcategory/620-jflteatt
Thats the correct link to weekly roms for slim rom for our device. your partitions might just be corrupted in case maybe having a jtag or using the pit file for MDL would fix? :/ im not an expert haha just observations.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
---------- Post added at 06:01 PM ---------- Previous post was at 05:57 PM ----------
xBeerdroiDx said:
that would be the worst mistake of your life. my wife has a One. stock, its like an iphone. rooted, there isnt 10% of the activity/development in the One boards that there are here so that makes life with a rooted htc device even more boring than a regular day with an htc device.
Click to expand...
Click to collapse
You sure? On the att one majority of devs dont post on the att htc one section but eather "HtC one" section since all roms work vice versa on that phone international roms > works on all models of the one.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

[Q] unauthorized software

I stupidly tried to flash a custom recovery without unlocking the boot loader (2nd time rooting a phone) and of course now I get the message that there is software not authorized by Verizon, yada yada yada.....I can't use the phone. As I already said, I'm not very smart w/ this I guess. I rooted my phone with the new towelroot method and it worked flawlessly....but then I tried to go further and figured I'd just do everything necessary to run custom roms. Anyways, I've got the yellow triangle and I really really don't want to go to Verizon and try to talk my way into a replacement (I just got a replacement phone about 2 weeks ago) Is there any way to fix this? Before you reply, know I don't have a windows computer so I don't think I can use Odin, and my phone isn't showing up in Kies when I connect it after making sure my phone is in download mode. I'm at a loss.
Your only option is Odin, I would say find a friend with a windows computer... Then once you are back on track, read on this forum about safestrap before you flash anything else... Good luck!
Sent from my SM-N900V using Tapatalk
mattchenzo said:
Your only option is Odin, I would say find a friend with a windows computer... Then once you are back on track, read on this forum about safestrap before you flash anything else... Good luck!
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Thanks. I know what I'm doing today now
Can anyone point me in the right direction to download the right pit file for use in Odin (Jodin3 to be specific). It's supposed to find the proper pit file automatically, but it can't for some reason. Oh, and I did do some digging....for some reason the only pit file I found (which was uploaded in Oct. of 2013) doesn't work. I can't find anything else other than that...if there is anything else.
I am trying to fix his phone for him but I am unable to find any full 4.4.2 Odin tars, are there even any available yet? The only ones I can find seem to be on websites I have never heard of haha.
Help Please
I also Rooted via Towel Method and flashed clockwork touch recovery not thinking, and i am also in the same boat. Can anyone point me in the direction of a stock TAR file to flash with ODIN, So i can get my note working again.. Any help would be great.. Thanks in advance
Shutton82 said:
I also Rooted via Towel Method and flashed clockwork touch recovery not thinking, and i am also in the same boat. Can anyone point me in the direction of a stock TAR file to flash with ODIN, So i can get my note working again.. Any help would be great.. Thanks in advance
Click to expand...
Click to collapse
Just found the link for it in this topic!
EDIT: Forgot to put in the link LOL http://forum.xda-developers.com/showthread.php?t=2783842
Worked like a CHARM!!!
draco259 said:
Just found the link for it in this topic!
EDIT: Forgot to put in the link LOL http://forum.xda-developers.com/showthread.php?t=2783842
Click to expand...
Click to collapse
Thank you, I just finished Flashing File with ODIN, Worked like a CHARM!!!! Many Many Thanks!!!!!:laugh::laugh::laugh::laugh:
Shutton82 said:
Thank you, I just finished Flashing File with ODIN, Worked like a CHARM!!!! Many Many Thanks!!!!!:laugh::laugh::laugh::laugh:
Click to expand...
Click to collapse
Glad I could be of some help

Samsung Galaxy A8 (A-800I) Stuck on Logo Screen with red Custom Binary blocked by FRP

Hello all!
First of all i want to thank this site (and the people behind it) that makes everything android possible.
I feel privileged to be a member of this forum specially on rough times like what i am facing right now.
I rooted my Galaxy A8-A800i the other day and everything went great. I followed the instructions that i found here. Unfortunately, yesterday i turned off the OEM Unlock on my phone. Now, as the thread title says it. it is stuck on the Logo Screen with the annoying " Custom Binary blocked by FRP Lock ". i read a guide that ashyx made and i felt stupid. I didn't know that turning the OEM Unlock will do that to my Phone.
Right now, I am digging deep on this forums to try and revive my phone that is currently in Brick state.
i am downloading a firmware from sammobile for my phone, the problem i have is... i don't know how to use it. I don't know much about my phone but I do want to learn a lot and i know that this is the right place. I would like to ask assistance on how to use the firmware that I am downloading right now, and also, can i make the Knox Counter go "0" again?
Thanks for everything guys. I highly appreciate everything i've learned here so far.
rissered said:
Hello all!
First of all i want to thank this site (and the people behind it) that makes everything android possible.
I feel privileged to be a member of this forum specially on rough times like what i am facing right now.
I rooted my Galaxy A8-A800i the other day and everything went great. I followed the instructions that i found here. Unfortunately, yesterday i turned off the OEM Unlock on my phone. Now, as the thread title says it. it is stuck on the Logo Screen with the annoying " Custom Binary blocked by FRP Lock ". i read a guide that ashyx made and i felt stupid. I didn't know that turning the OEM Unlock will do that to my Phone.
Right now, I am digging deep on this forums to try and revive my phone that is currently in Brick state.
i am downloading a firmware from sammobile for my phone, the problem i have is... i don't know how to use it. I don't know much about my phone but I do want to learn a lot and i know that this is the right place. I would like to ask assistance on how to use the firmware that I am downloading right now, and also, can i make the Knox Counter go "0" again?
Thanks for everything guys. I highly appreciate everything i've learned here so far.
Click to expand...
Click to collapse
you can try flashing the official firmware I hope it fixes your phone.
and knox cannot be reset to 0
nepalbiraj said:
you can try flashing the official firmware I hope it fixes your phone.
and knox cannot be reset to 0
Click to expand...
Click to collapse
Thank you!... i downloaded the stock firmware from sammobile. but whenever i extract it there's a rar message saying it is corrupted so i DLed a new one, it has the same result. I haven't tried using it to fix my phone but i will try right now. Ill give an update on how it goes.
Tried flashing the new firmware but Odin can't detect my phone. i have the latest Driver for SAMSUNG and i have the latest Odin. I tried restarting my phone and my computer several times but it still fails. i am really frustrated and our of options right now. Even if Odin detects my phone there's no guarantee that the stock firmware will be installed properly since it always shows corrupt when i extract it from zip
rissered said:
Tried flashing the new firmware but Odin can't detect my phone. i have the latest Driver for SAMSUNG and i have the latest Odin. I tried restarting my phone and my computer several times but it still fails. i am really frustrated and our of options right now. Even if Odin detects my phone there's no guarantee that the stock firmware will be installed properly since it always shows corrupt when i extract it from zip
Click to expand...
Click to collapse
Install the Samsung drivers first, reboot your pc.
Start odin in Admin mode then put your device in download mode, plug in the usb cable. Your device should be detected.
Don't try flashing a corrupt firmware, it will be rejected anyway as it will fail the md5 check.
I suggest you use a different browser to download.
@ashyx hey! thanks for all your help. my internet went offline while i was trying to respond to the other thread. my phone is now fixed with your help. Thank you so much! only took 3 mins for the while Odin flashing to complete
This issue is now FIXED
rissered said:
This issue is now FIXED
Click to expand...
Click to collapse
but how? I have installed official firmware and flashed via odin and it shows"success", but then it gets stuck in the samsung logo. please help

Categories

Resources