Greenify causes Dialer lag - Galaxy S 4 Q&A, Help & Troubleshooting

Hi folks,
I am on Imperium rom v16 and I am having delays in my stock dialer app especially when I dial USSD codes for credits check etc. I have 2 power saving apps running namely PowerNap and Greenify.
I disabled powernap but didnt fixed the issue but when I disable greenify the lag was gone
So please can anyone tell me exactly which option/setting in greenfy might be causing this problem?
P.S I am using greenify donation version with xposed and no system app is greenified whatsoever
Thanks in advance..

Can u get network signal after installing imperium lolirom v16.0.
I didnt get the network signal.modem and bootloader installation shows fail using odin.

rahulpr6661 said:
Can u get network signal after installing imperium lolirom v16.0.
I didnt get the network signal.modem and bootloader installation shows fail using odin.
Click to expand...
Click to collapse
yes I can, which ver of odin u using?
Sent from my Galaxy S4 using XDA Labs

ElIT3ShOOT3R said:
Hi folks,
I am on Imperium rom v16 and I am having delays in my stock dialer app especially when I dial USSD codes for credits check etc. I have 2 power saving apps running namely PowerNap and Greenify.
I disabled powernap but didnt fixed the issue but when I disable greenify the lag was gone
So please can anyone tell me exactly which option/setting in greenfy might be causing this problem?
P.S I am using greenify donation version with xposed and no system app is greenified whatsoever
Thanks in advance..
Click to expand...
Click to collapse
Greenify uses accessibility settings. Disable them and the lag will go away. Unfortunately Greenify won't work properly if at all, so you have to decide which is more important to you: no lag or battery life.
An article posted on the portal over the weekend talked about lag caused by accessibility settings. Greenify was featured.

Strephon Alkhalikoi said:
Greenify uses accessibility settings. Disable them and the lag will go away. Unfortunately Greenify won't work properly if at all, so you have to decide which is more important to you: no lag or battery life.
An article posted on the portal over the weekend talked about lag caused by accessibility settings. Greenify was featured.
Click to expand...
Click to collapse
Thanks for the info, I will check it out..
Sent from my Galaxy S4 using XDA Labs

Related

[Q] S health FC

Hello all,
I'm new to Note 3 but I've got stick to S Health using SGS4.
But any of installed ROMs such as Omega and Foxhound for SGN3 causes S Health to crash. And its only crashes when recovered from backup (of course with patch) and after filling the profile.
How could I fix it?
Phelicks said:
Hello all,
I'm new to Note 3 but I've got stick to S Health using SGS4.
But any of installed ROMs such as Omega and Foxhound for SGN3 causes S Health to crash. And its only crashes when recovered from backup (of course with patch) and after filling the profile.
How could I fix it?
Click to expand...
Click to collapse
what kind of mods do you use? xposed and especially wanam is known for causing troubles with s-health! try to disable them and look if the FC is still present!
TML1504 said:
what kind of mods do you use? xposed and especially wanam is known for causing troubles with s-health! try to disable them and look if the FC is still present!
Click to expand...
Click to collapse
Yes, I use xposed, but not Wanam. But the list of modules didnot cause such problem on SGS4.
If you mod multi window app with exposed, s.health will fc
Sent from my SM-N9005 using Tapatalk

Healthservice stopped working

Hey guys on G900I stock rooted rom untill slimbeam or paranoid comes out, I had disabled s health and other bloat around about the time the "health service has stopped working" but also did some tweaks so i'm not sure what one caused the problem, but i've completely removed s health and i cant see anywhere in system apps/services "health service" just want it gone so the error doesn't come up. I get it about 4-5 times a day. Any help would be appreciated
Did you installed xposed framework? If yes.. That's the reason.
Sent from my SM-G900H using XDA Premium 4 mobile app
mindol81 said:
Did you installed xposed framework? If yes.. That's the reason.
Sent from my SM-G900H using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah damn, I'll uninstall it for now until a decent rom is out. Cheers dude.
Offica said:
Yeah damn, I'll uninstall it for now until a decent rom is out. Cheers dude.
Click to expand...
Click to collapse
I am having the same problem even after I unistalled xposed framework. Please advise.
To revert, you need to clear the system cache and the Shealth app cache and data.
Lots of threads on how to solve that, you can find lots of elaboration in existing threads if you search.
In short you can have Shealth and Xposed working if you disable secure storage - which breaks private mode, et cetera.
Or you can revert. Basically: Shealth, Xposed, Private mode. Pick any two.
.

[Q] [64-Bit] Best custom ROM for Yurek.

Anyone help me..
Which is the best custom ROM for yureka for multitasking and have good sound output.
Anyone plz help me...
awesumahti said:
Anyone help me..
Which is the best custom ROM for yureka for multitasking and have good sound output.
Anyone plz help me...
Click to expand...
Click to collapse
It's too soon for such a request.
But since you asked, Blisspop and Ressurection Remix are good. [5.1.x]
http://forum.xda-developers.com/yureka/development/rom-blisspop-v3-1-yureka-t3086740
http://forum.xda-developers.com/yureka/development/rom-resurrection-remix-t3089550
Personally I'm happy with a modified version of stock CM12S [5.0.2]
id74em8 said:
It's too soon for such a request.
But since you asked, Blisspop and Ressuraction Remix are good. [5.1.x]
http://forum.xda-developers.com/yureka/development/rom-blisspop-v3-1-yureka-t3086740
http://forum.xda-developers.com/yureka/development/rom-resurrection-remix-t3089550
Personally I'm happy with a modified version of stock CM12S [5.0.2]
Click to expand...
Click to collapse
Well currently I'm also using stock with some mods but the main issue is battery drain so which ROM can I use to reduce battery drain..
I got an increase in battery life an amazing one that is by doing the privacy guard thingy that is mentioned in the forum. You switch off wake up autostart and keep awake in advance options in the advance tab under privacy guard which is in the privacy tab and the battery increase was insane. Search the forum for a better tutorial. It will surely help
sunny765 said:
I got an increase in battery life an amazing one that is by doing the privacy guard thingy that is mentioned in the forum. You switch off wake up autostart and keep awake in advance options in the advance tab under privacy guard which is in the privacy tab and the battery increase was insane. Search the forum for a better tutorial. It will surely help
Click to expand...
Click to collapse
Already did it bro still battery draining..!
awesumahti said:
Well currently I'm also using stock with some mods but the main issue is battery drain so which ROM can I use to reduce battery drain..
Click to expand...
Click to collapse
1- Do a Dalvik cache wipe.
2- Flash a custom kernel. [I'd suggest Sandy 1.3 CPUQuiet build]
3- Keep governor at interactive>>runnable [this is the default, optimized for more battery] or interactive>>load_stats [this should improve performance at higher loads]
4- Enable MSM Thermal [this should fix the heating problem]
5- use Greenify 2.6+ with Xposed, if you're not using it already [this should help in hibernation]
6- Use Recently [this should stop the infamous memory leak Lollipop is known for]
7- Use Amplify for controlling all device wakelocks [this should help maintaining the CPU activity]
8- You can access PrivacyGuard and close the wake up and keep awake switches for all apps you think are necessary [this should reduce the CPU idle usage]
^Do all these and I don't think you need to worry about your battery at all.
Also, can you tell me which app uses most of your battery?
id74em8 said:
1- Do a Dalvik cache wipe.
2- Flash a custom kernel. [I'd suggest Sandy 1.3 CPUQuiet build]
3- Keep governor at interactive>>runnable [this is the default, optimized for more battery] or interactive>>load_stats [this should improve performance at higher loads]
4- Enable MSM Thermal [this should fix the heating problem]
5- use Greenify 2.6+ with Xposed, if you're not using it already [this should help in hibernation]
6- Use Recently [this should stop the infamous memory leak Lollipop is known for]
7- Use Amplify for controlling all device wakelocks [this should help maintaining the CPU activity]
8- You can access PrivacyGuard and close the wake up and keep awake switches for all apps you think are necessary [this should reduce the CPU idle usage]
^Do all these and I don't think you need to worry about your battery at all.
Also, can you tell me which app uses most of your battery?
Click to expand...
Click to collapse
Thanks mate but I have few queries :-
1. MSM thermal where it can be found..??
2. I don't have xposed so where to download it from..??
3. Google play services and Android system and media server the most battery eating apps..
awesumahti said:
Thanks mate but I have few queries :-
1. MSM thermal where it can be found..??
2. I don't have xposed so where to download it from..??
3. Google play services and Android system and media server the most battery eating apps..
Click to expand...
Click to collapse
1- MSM Thermal is actually a kernel feature. You may use Device Control to activate it.
1- Also you can use Temperature Throttle from TricksterMod.
2- Xposed for our device is a pain in the butt.
Try to find an xposed sdk21 arm64 zip. Normal arm builds won't work because we have an arm64 CPU. The zip is unstable though. Flash it and reboot.
Then find an apk file xposed 3 alpha 3
If you can't find them I will provide the links soon.
Then use the modules you want.
3- classic. The PrivacyGuard thing should help in this.
I'm being curious, but what kind of mods have you originally applied on your phone?
id74em8 said:
1- MSM Thermal is actually a kernel feature. You may use Device Control to activate it.
1- Also you can use Temperature Throttle from TricksterMod.
2- Xposed for our device is a pain in the butt.
Try to find an xposed sdk21 arm64 zip. Normal arm builds won't work because we have an arm64 CPU. The zip is unstable though. Flash it and reboot.
Then find an apk file xposed 5 alpha 3
If you can't find them I will provide the links soon.
Then use the modules you want.
3- classic. The PrivacyGuard thing should help in this.
I'm being curious, but what kind of mods have you originally applied on your phone?
Click to expand...
Click to collapse
Firstly Thanks mate
Now answer to your question first I used coolify app then I flashed xccelerate kernel then I flashed stock again but now I'm on Sandy..
And bro please provide me link for xposed app..
awesumahti said:
Firstly Thanks mate
Now answer to your question first I used coolify app then I flashed xccelerate kernel then I flashed stock again but now I'm on Sandy..
And bro please provide me link for xposed app..
Click to expand...
Click to collapse
framework zip:
http://forum.xda-developers.com/xposed/xposed-android-5-1-successfully-t3074586
USE THE sdk21 VERSION ONLY
apk:
http://forum.xda-developers.com/showthread.php?t=3034811
id74em8 said:
framework zip:
http://forum.xda-developers.com/xposed/xposed-android-5-1-successfully-t3074586
USE THE sdk21 VERSION ONLY
apk:
http://forum.xda-developers.com/showthread.php?t=3034811
Click to expand...
Click to collapse
Thanks mate..
id74em8 said:
framework zip:
http://forum.xda-developers.com/xposed/xposed-android-5-1-successfully-t3074586
USE THE sdk21 VERSION ONLY
apk:
http://forum.xda-developers.com/showthread.php?t=3034811
Click to expand...
Click to collapse
Mate this happened..
awesumahti said:
Mate this happened..
Click to expand...
Click to collapse
Yeah it's okay. The framework is active. The app is still in alpha stage for 5.0.x and upwards.You can now install/uninstall modules normally, but you can't reboot through Xposed.
Thanks bro..
id74em8 said:
Yeah it's okay. The framework is active. The app is still in alpha stage for 5.0.x and upwards.You can now install/uninstall modules normally, but you can't reboot through Xposed.
Click to expand...
Click to collapse
Greenify not working for me mate what to do..??
awesumahti said:
Greenify not working for me mate what to do..??
Click to expand...
Click to collapse
Which version are you using?
Use v2.6.2 beta 3
id74em8 said:
Which version are you using?
Use v2.6.2 beta 3
Click to expand...
Click to collapse
See this mate..
awesumahti said:
See this mate..
Click to expand...
Click to collapse
So, what do you mean it's not working?
What error(s) are you getting?
id74em8 said:
So, what do you mean it's not working?
What error(s) are you getting?
Click to expand...
Click to collapse
Whenever I tap the green zzz button to hibernate the apps a message pops out saying failed to put in hibernation like this -

[Q] Which Xposed & module to remove permission on apps ?

Hello,
I do not find which version of Xposed I should install on 2.2.0 to have access on app permission ?
My Google Play Service is pumping too much battery, and I would like to remove some permission, as "keep awake" ....
If someone could point me in right direction ?
Thanks
To avoid battery draining from Google Play services, I recommend getting the donator version of Amplify.
With Amplify you can block Wakelocks and Alerts for specific amout of times.
There is a huge thread about this here:
http://forum.xda-developers.com/android/general/guide-extreme-battery-life-t3095884
Xposed does not give you app permission access on its own - it is merely a framework. As far as which version of Xposed the OP2 uses, install SDK22 for the ARM64.
Once you have that, download, install, and activate Amplify in Xposed, then go read the topic linked by @GerRudi.
ChefChaudart said:
Hello,
I do not find which version of Xposed I should install on 2.2.0 to have access on app permission ?
My Google Play Service is pumping too much battery, and I would like to remove some permission, as "keep awake" ....
If someone could point me in right direction ?
Thanks
Click to expand...
Click to collapse
Doesn't the oxygen ROM itself can manage app permissions in the settings?!?
Sent from my ONE A2001 using Tapatalk
omidz said:
Doesn't the oxygen ROM itself can manage app permissions in the settings?!?
Click to expand...
Click to collapse
Yes, and fairly well. Xposed apps DO give more control, though. Amplify, for instance, will let you delay wakeups to every 15 minutes or so, instead of simply turning them on or off.
Ssayerr said:
Yes, and fairly well. Xposed apps DO give more control, though. Amplify, for instance, will let you delay wakeups to every 15 minutes or so, instead of simply turning them on or off.
Click to expand...
Click to collapse
I didn't know that, thanks! I have to give it a try
Sent from my ONE A2001 using Tapatalk

Battery drain after GooglePlay services 9.6.83 update?...

Anybody noticed huge battery drain with new GooglePlay services 9.6.83.
Have incredible numbers of wakelock from "ContextManagerWakeLock" secondly with "net_scheduler".
I am on Discovery KitKat.
Cleaning data and cache doesn't work...
Any help?
ren7o said:
Anybody noticed huge battery drain with new GooglePlay services 9.6.83.
Have incredible numbers of wakelock from "ContextManagerWakeLock" secondly with "net_scheduler".
I am on Discovery KitKat.
Cleaning data and cache doesn't work...
Any help?
Click to expand...
Click to collapse
Same here. Seems to be a problem with that specific version. There are a few other posts, all very recent, from people complaining about it.
...
Glad I am not alone... If you find any fix post it here please.
ren7o said:
Glad I am not alone... If you find any fix post it here please.
Click to expand...
Click to collapse
The fix will have to come from Google. This has happened before, we just have to wait until they release a fix. I opted for using Amplify (an Xposed Framework module) to block the wakelock, but that's not a fix anyway.
Thank you Adrianrff!
I have blocked SchedulerReceiver and SchedulerInternalReceiver services in MyAndroidTools seams it helped...
Credits goes to denon480 see this post
I do not know if it has any impact on system or functionality of google apps.
I tried to install xposed 2.5.1 but after Amplify module installation I have many FC cant even get in system settings.
What version of xposed do you use?
ren7o said:
Thank you Adrianrff!
I have blocked SchedulerReceiver and SchedulerInternalReceiver services in MyAndroidTools seams it helped...
Credits goes to denon480 see this post
I do not know if it has any impact on system or functionality of google apps.
I tried to install xposed 2.5.1 but after Amplify module installation I have many FC cant even get in system settings.
What version of xposed do you use?
Click to expand...
Click to collapse
It says 3.0 alpha 4.
Thanks but how have you installed this version? Official installer shows latest 2.6.1 versiom for Kitkat but it is not working...

Categories

Resources