Related
Intro
I know there are a thread with specific with this thread
but this thread will be much solution
Old Link (Graveir) = Xda
Warning: There are Soft Brick/Hard Please Be carefull with flashing and unlocking.
Soft Brick:
For NoObs said "bootloop"
this is a soft brick and easy to be fixed
Solution:
Xrecovery:
Use Backup (If you Did This) This is the easy way
FlashTool:
Flashtool is a software developed for Xperia X10, It Supported On X8
Tutorial:
1. Download latest version from this thread: Xda
2. ROM Image, Contain Russia and Generic :
2.1.1.A.0.6 Generic
Russia 2.1
3. Baseband Collection (Blagus) Many Custom Rom Use M76XX-TSNCJOLYM-53404015 which mean its xxx15 use it in this blagus folder
Mediafire
4. Place ftf file in /firmwares directory of your flashtool.
5. Install drivers from /drivers directory
6. Prepare yourself - plug the USB cable to the computer and launch flasher.
7. Click "flash", choose your ROM from the list, Wait for instructions.
8. When the instruction pops up, press and hold "back" button on your X8 and plug the cable into it. Keep holding untill you see that flashing of files has begun, then you may release it.
9. Flashing will take a while, you may observe the progress on a bottom bar. When it's finished you will be asked to plug off your device and reboot it.
10. If you wish to change baseband, clean firmware directory in flashtool and place baseband ftf file in it, then go through flashing procedure again.
11. If you try this correctly your phone will work again
Hard Brick:
Device Not power up, Xrecovery/CWM not working, Extreme Brick
Solution:
This instructions are software related only not for hardware
Seus/PCC:
This is easiest way to unbrick your x8
PCC:SonyEricsson
Seus: Seus is outdated and not continued
Instruction:
1. Click Support zone
2. Click Phone update (Don't connect your phone)
3. Click "repair phone"
4. Follow onscreen instruction
5. Done,Enjoy
FlashTool:
Flashtool is a software developed for Xperia X10, It Supported On X8
Tutorial:
1. Download latest version from this thread: Xda
2. ROM Image, Contain Russia and Generic :
2.1.1.A.0.6 Generic
Russia 2.1
3. Baseband Collection (Blagus) Many Custom Rom Use M76XX-TSNCJOLYM-53404015 which mean its xxx15 use it in this blagus folder
Mediafire
4. Place ftf file in /firmwares directory of your flashtool.
5. Install drivers from /drivers directory
6. Prepare yourself - plug the USB cable to the computer and launch flasher.
7. Click "flash", choose your ROM from the list, Wait for instructions.
8. When the instruction pops up, press and hold "back" button on your X8 and plug the cable into it. Keep holding untill you see that flashing of files has begun, then you may release it.
9. Flashing will take a while, you may observe the progress on a bottom bar. When it's finished you will be asked to plug off your device and reboot it.
10. If you wish to change baseband, clean firmware directory in flashtool and place baseband ftf file in it, then go through flashing procedure again.
11. If you try this correctly your phone will work again
Coma Brick:
Device wont power on at all or respond to button input
Don't worry ok
Solution:
Charge your phone with main supply (not usb) let it charge fully 4 hours
It will start again. Battery big icon will appear around 30% battery charged
Let it full or boot up
Loader Brick:
This because of false instruction of unlocking bootloader or flashing kernel
Solution:
Relock, PCCompanion
A. Relock your bootloader
B. Use PCC to restore your phone
Instruction For PCC :
1. Click Support zone
2. Click Phone update (Don't connect your phone)
3. Click "repair phone"
4. Follow onscreen instruction
5. Done
Kernels:
There are kernel for x8 with much new feature
LinuxDX: Xda
Doixanh special kernel with much features
Pros: Has much Features, little bit improved perfomance
Cons: Only for GingerDx, Sometimes fast but Sometimes Slow, No OC
Alfs Xda
Alfsamsung kernel with fast perfomance
Pros: Fast perfomance, Much features, VR I/O scheduler
Cons: FPS Uncap
nAa: Xda
nobodyAtall kernel with bunch of features
Pros: Best features with (Tun/Tap, Ramzswap for compcache)
Cons: Partially Supported
FXP: Xda
FreeXperia kernel standard feature for official cm7
Pros: Fully working netfilter/iptables/ap, standard feature
Cons: Only Supported only Fxp or official cm7 rom
Download For FXP kernel:
All Fxp: Contain all kernel Here @ Skydrive
Build.prop tweaks
Code:
# Raise JPG quality to 100%
ro.media.enc.jpeg.quality=100
# VM Heapsize; 178MB RAM = 32 is better
dalvik.vm.heapsize=32m
# Render UI with GPU
debug.sf.hw=1
# Decrease dialing out delay
ro.telephony.call_ring.delay=0
# Helps scrolling responsiveness
windowsmgr.max_events_per_sec=150
# Save battery
wifi.supplicant_scan_interval=180
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
# Disable debugging notify icon on statusbar
persist.adb.notify=0
# Increase overall touch responsiveness
debug.performance.tuning=1
video.accelerate.hw=1
# Photo and video recording quality tweak (2.3 Rom only)
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=800000
# Photo and video recording quality tweak (2.2 Rom only)
ro.media.dec.jpeg.memcap=10000000
ro.media.enc.hprof.vid.bps=1000000
# Photo and video recording quality tweak (Official ROM only)
ro.media.dec.jpeg.memcap=10000000
ro.media.enc.hprof.vid.bps=1600000
# Internet tweaks
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.hep=1
ro.ril.hsdpa.category=10
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=6
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
ro.ril.enable.sdr=1
ro.ril.enable.gea3=1
ro.ril.enable.fd.plmn.prefix=23402,23410,23411
ro.ril.enable.a52=1
ro.ril.enable.a53=1
ro.ril.enable.dtm=1
# NetSpeed tweaks
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
# Disable blackscreen issue after a call
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Fix some application issues
ro.kernel.android.checkjni=0
# Phone will not wake up from hitting the volume rocker
ro.config.hwfeature_wakeupkey=0
# Force button lights on when screen is on
ro.mot.buttonlight.timeout=0
# Disable boot animation for faster boot
debug.sf.nobootanimation=1
# Enable Stagefright helps stream Video and Music Faster
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
# Enable display Dithering
persist.sys.use_dithering=1
# Enable purgeable assets
persist.sys.purgeable_assets=1
# For SD storage insert notification sound
persist.service.mount.playsnd=0
Local.prop tweaks
Code:
ro.FOREGROUND_APP_ADJ=0
ro.VISIBLE_APP_ADJ=3
ro.PERCEPTIBLE_APP_ADJ=2
ro.HEAVY_WEIGHT_APP_ADJ=4
ro.SECONDARY_SERVER_ADJ=5
ro.BACKUP_APP_ADJ=6
ro.HOME_APP_ADJ=2
ro.HIDDEN_APP_MIN_ADJ=7
ro.EMPTY_APP_ADJ=15
ro.FOREGROUND_APP_MEM=1536
ro.VISIBLE_APP_MEM=2048
ro.PERCEPTIBLE_APP_MEM=1024
ro.HEAVY_WEIGHT_APP_MEM=6656
ro.SECONDARY_SERVER_MEM=6656
ro.BACKUP_APP_MEM=7168
ro.HOME_APP_MEM=1024
ro.HIDDEN_APP_MEM=7168
ro.EMPTY_APP_MEM=8192
SuperCharger:
OOM grouping fixed + minfree tweaks
Credit: zeppelinrox
Download: Xda
Minfrees & Adj Stick
Instruction:
1.In /etc/hw_config.sh write this line
Code:
sh /etc/minfreeadjstick.sh
2.then, create a file (not folder) called minfreeadjstick.sh in /etc
3.open it and write this lines inside
Code:
# Script to make minfrees and adj stick (Credits to Zeppelinrox)
sleep 40
echo "0,3,5,7,14,15" > /sys/module/lowmemorykiller/parameters/adj
echo "1536,2048,6656,7168,7680,8192" > /sys/module/lowmemorykiller/parameters/minfree
echo "0" > /proc/sys/kernel/panic
echo "0" > /proc/sys/vm/oom_kill_allocating_task
echo "0" > /proc/sys/vm/panic_on_oom
echo "1" > /proc/sys/kernel/panic_on_oops
echo "0" > /proc/sys/kernel/panic
# end of script
1. Froyobread : This Rom is a great choice for beginners, its stable and fast. it's core cm6. Android 2.2, a great upgrade if you are still using the 2.1 stock eclair this is the best upgrade,, many hail this as the best stable ROM there is, its full of features, it delivers smooth performance, and i have found it to be very stable. so if your new just use this, you will be satisfied
Link
Pros : Still considered the most stable Rom, Fast and Smooth Performance, Good app Performance, android 2.2 has greater app support, most features work without any problems, little or no bugs, one of the most famous rom so if you have any problem lot of people out there to help you
Cons: Android 2.2 has become old many people prefer Android 2.3 over it. Not as Smooth as gdx when it comes to scrooling, according to some people Wifi does not work(it worked for me though)
2.Hackdroid: A decent rom, flashy and stylish, sometimes laggy. but overall a very good room. great for starters, however many people stated this one to be a little unstable , but it really depends on what apps you run if you are looking for a good looking rom with visual features this one is a pretty good choice
Link
Pros: Very Customizable, Decent Performance, Stable if you stick to normal apps, Has more features than most Roms
Cons: A little Laggy, Sometimes Unstable, Many people have Reported bugs in this rom. Other Roms Offer Superior Performance
3.KuyaDroid: This one is an awesome rom, solid and stable, fast performance smooth menu and everything is decent. Its a good rom if your into gaming as it has built in Overclock, Undervolt, and gesture.(note these features can be manually added on other roms too). One more noticable thing about this rom is that it's core is cm7, and android version 2.3( a big update from the stock 2.1)
Link
Pros: Very fast app performance, Smooth Scrooling, Android 2.3, Wide Range of Users so you will easily find solutions if you face any problems, Overall Solid CM7 Rom.
Cons: Lacks Features that are available on Gingerdx, Some Reported Bugs, some apps force closes
4.GingerDX: This is update of the Famous Froyobread, So far its fast and stable although a few bugs have been reported but its one of the most stable and working cm7 , android 2.3 roms around. its definitely worth a try if you want a fast and smooth working rom. also it has some pretty good features more than most roms out there to exact. Many people state this is the best Cm7 rom out there
Link
Pros: One of the Smoothest CM7 Rom i have used, Full of features, Customizable, Most apps work without any problem, Regularly Updater, Wide range of users so you will easily find solutions if you do face any problem, Upgraded Camera
Cons: People claim it to be not as Stable as Froyobread, Some minor bugs still needs to be fixed, Some features and still needs to be more polished and stable, updates have recently slowed down
5.BehradGH: this one is a light and simple rom, not a bad choice for newbies but it does not have as much customizable features as the other roms, its a good rom for starters,, so if your looking for a simple rom and an upgrade from your stock rom you should try this one
Link
Pros: Light Rom, Good for Average Daily apps, Simple rom without complications. Simple Upgrade from the Stock Rom
Cons: Powerful Games Such As Nova, MC Sandstorm often Force closes, Some Reported Bugs, A little unstable while Performing Certain Operations
6.GingerCruzt: Just tested this Rom Recently , And boy was i surprised , good performance and good looks, which is something very hard to get in one rom. in some cases better than GDX, but not as stable when running apps, but for normal daily use this one beats most of the roms out there. also it has a very similar look to the stock android. so if your into stock looks, try this out. also its android 2.3 /Cm7.
Link
Pros: New and fresh, Decent Performance and Features, Not bad for daily use, most apps work without problem, Android 2.3. the new look is unique(gc 8.1 and after)
Cons: The Creator of the Rom is not really Co operative since he is not really active on XDA, Minor bugs, Is not updated as regularly as other Roms, Lacks advanced Features that available on other Cm7 Roms
7.Krauser-SROM: Recently Tested this Rom, this uses a lot of Froyobreads Features, Its fast and stable , not a bad choice if you want try something other than those famous roms, i found it to be really decent rom. Not bad for daily normal usage
Link
Pros: Simple Lightweight Rom, Most apps work, Stable and Smooth
Cons: Some FC on apps, Community of its users is not as big as Froyobread, Android 2.2, Doesn't have much features as some of the other roms
8.GingerXperia: Its new and its great! this rom is pretty good, and i actually find it to be even faster than gdx,Yes it lacks the features which gdx offers but if you can make do without those advanced features this is the rom for you, its also reported to be stable and smooth , its bugfree though but hopefully it will be fixed on future updates
Pros: Very fast, Simple Rom, Light weight, Good app performance, Stable Rom, the rom's creator used a lot of contents from other roms without taking permission from them
Cons: Lacks some Features, some bugs, New so the community is still small, got worse with recent updates
This is A Great Rom but creator not taking credit from other rom
9.Fd xperience: One of the better new roms, it has a stock look which is sure to attract many people, if you want to upgrade but do not want tolose your stock looks and yet have a stable upgraded rom this is the rom for you, its smooth and fast better than most roms out there, But it has some bugs and support issues, and i got some fc when playing games on it , other than that its very stable and fast
Link
Pros:Fast,Stock look, Stock apps, good app performance, Smooth scrooling,
Cons: The contacts app is very slow, The music player lacks features, Some 3d games FC, the new updates boasted looks but slowed down performance
10.Official CM7: Standard rom with lack of camera, fm, live wallpaper
Pros: Officialy supported by cyanogenmod
Cons: Buggy ,Camera (VGA), FM
11.Xgin: One better continued rom, it fast and stylish continued by rieken yuki build by shpit
Pros: Fast, Stylish, Walkman style
Cons: Heavy Rom
Extra Section
Root, Busybox, DualRecovery, Jit With X8toolbox:
this is the simple way for NoObs
1. Download Here @ Xda
2. Extract
3. Open x8toolbox.cmd
4. Follow on-screen instructions
Guide How to unlock bootloader and relock : Here @ Xda
Wifi Extra
This wifi extra will enabling N standard and 5ghz band
1. go to /system/etc/firmware
2. find this file name
Code:
fm_rx_init_1273.2.bts
fm_tx_init_1273.2.bts
fmc_init_1273.2.bts
3.Are they there? good you will have 5ghz band. Are they not there? you wont get 5ghz band
4.Go to /system/etc/ and find tiwlan.ini Note: In CM7 based ROMs the path may be /system/etc/wifi
5.Look for the following lines:
Code:
HT_Enable=0 #0=disable 802.11n support / 1=Enable
BurstModeEnable = 0 # 0 - Disabled 1 - Enabled
WiFiAdhoc = 0
And Change them into
Code:
HT_Enable=1 #0=disable 802.11n support / 1=Enable
BurstModeEnable = 1 # 0 - Disabled 1 - Enabled
WiFiAdhoc = 1
6. This stage is for people who have file from step 2
Look for the line
Code:
Single_Dual_Band_Solution = 0
Change them into
Code:
Single_Dual_Band_Solution = 1
7.Save,Reboot
8.Enjoy
Modules For Stock Kernels
Modules is Add-on for our X8
X8Gesture Pinch zoom/Fake DT Doixanh Sypanitcs Fake DT
Instruction & Download Here @ Xda
andrej456 Pinch zoom/Fake DT Good for zooming Sypanitcs Fake DT
this is andrej456 X8Gesture good for zooming but no game mode
Download Here @ Mediafire
Instruction Here @ Xda
AX8MT Cypress Real DT by AnDyX
Instruction & Download Here @ Xda
X8UnderVolt UnderVolt CPU voltage
Instruction & Download Here @ Xda
X8Overclock Overclock X8 CPU
Instruction & Download Here @ Xda
Additional Modules: Tun/Tap, Cifs, NTFS, UTF8, EXT3, Ext4
You Can Find Here @ Xda
GingerXperia Blog
@ xperiafan13: please take a credit to developer that based your rom
URL:Here @ blogspot
Note: Use google translate to translate to your language
Kernel building for noob:
Instruction & Download Here @ Xda
Flash Player 10.3 ported For Armv6
Instruction & Download Here @ Xda
Some Word
Please Rate it if necessary Sticky this thread
Sense Progress
This is Sense Progress by me and Salo-S
Wifi = Working
By fixing
Code:
wifi.interface = tiwlan0
to
Code:
wifi.interface = wlan0
and replace some wifi libs
3G = Partially
Connect on E15i only not E15a
Camera = ?
Didn't tested it now
Salsa have 5mp camera so it's not easy to make it work
Vibra = Working
3D = Working With Error
Not Implemented:
ANT+
Good job, keep it up. Good for the Noobs.
You sure you don't want to reserve this space too?
There is no link to FXP Kernel... Show some respect to this dev please...
Sent from my E15i using Tapatalk
Nice guide .. keep it up!!!!!!! simple and Clean~~~
Sent from my GX8 using xda premium @kakho55 XDA
Man you did a good job,but forgot one of the greatest roms,and it is Xgin.that should be unforgetable.
Added Enjoy
Thank you
hi bro...i want to ask u something...i have do unlocked bootloader for my w8 using x8 method...after it finish my phone switch off and can't turn on...it is coma brick or loader brick?
one more think is it same between x8 and w8??and i can't do flashing because my phone can't turn on and usb can't detect....plzz help me friend...
Did you sim unlocked yor phone?if not then just reflash your w8 with sony ericsson update service qnd try unlocking it again.
i can't reflash it because my phone totally not function...no LED light appear...no power on...usb also not detected...
Its ok,dont panic.
You have pc companion right?try removing battery,plug in the phone and put the battery back in.it should set the phone in flash mode.then repair it via pc companion.if that doesnt work then its not a brick,your phone is broken.
U mean plug in usb in the phone 1st then put in battery again,right?
Yes
Sent from my X8 using xda premium
it still didn't work...my phone like dead phone..nothing happen...this is brick or hardware problem??
i have done unlocked bootloader successfully and after that this kind of problem happen...
It's doesn't turn on?
Sent from my E15 using Tapatalk
yes bro...
Performance and Battery life of recent builds do not reflect what this ROM can achieve.
FEATURES :good:
# CM13 based
# Multi app split screen (enable in dev settings)
# add my own version number to settings app
# Blur
# CM changes
# Custom Blur Status bar
# Custom Blur Multitasker
# Updated Launcher Blur
# Marshmallow open app animation
# Screen Recorder
# Custom Blur LockScreen
# Custom Carrier label
# Marsh Settings
# Color Control
# FM Radio
# NEW CM Theme Engine
And some more features to check out
ISSUES
# Browser APP not working (disable/unninstall).
ROM Screenshots - http://imgur.com/a/N6N7t :fingers-crossed:
Download: [D855] - https://androidfilehost.com/?fid=24686679545611169
CREDITS
@Aaahh
THANKS
CyanogenMod
Serjar for blur code
Contributors
abinsur279
Source Code
http://github.com/MarshROM
ROM OS Version: 6.0.1 Marshmallow
ROM Kernel: Linux 3.4.0 CM
Version Information
Status: Beta
Current Beta Version: 2.2
Beta Release Date: 2016-09-30
Created 2016-08-30
Last Updated 2016-08-30
Where the heck are you guys getting that list, of features? It's wrong
Aaahh said:
Where the heck are you guys getting that list, of features? It's wrong
Click to expand...
Click to collapse
Based in Marsh threads - http://forum.xda-developers.com/oneplus-one/development/rom-marsh-t3258130 and http://forum.xda-developers.com/moto-x/development/rom-marsh-2-0-t3401577
shouldnt this topic be moved to android development?
Hey which gapps our installation necessary
Howdy,
We are migrating over from BimmerPost over to XDA because the Original Thread has evolved from just the DIY install into more of a modification of the Unit itself. The unit we are talking about is This One In Particular, however it has similarities of other units that are in the F Series BMWs (jmoney99 on BimmerPost has one in the X3).
I hope that we can engage the whole Android Community better here on XDA while talking with other folks who have this unit on BimmerPost.
Avin has released a GEN2 unit with a different hardware format in connectors, but the specifications seem to be the same. The software ROMs and MCU also seem to work without issues on the GEN2. Until stated otherwise, you can assume software is identical.
Specifications:
AVIN Model: BMWF30A-1025
Device: rkpx3
Device Model: rkpx3
Manufacturer: rockchip
Brand: rockchip
Hardware: rk30board
ID: KTU84Q
The unit runs Android 4.4.4, 1GB Ram, 1.6 Ghz Quad Core CPU. So far, this is what we know is possible with it:
Rootable through KingRoot
KingRoot can be removed by SuperSume
SuperSu works fine
Rootable Applications are able to be installed and work properly
These are the following versions that are currently on record being released from AVIN (Updating breaks Root):
20170711-Ver1.0.0.0001_foreign_a (Rootable) - MD5 (update.img) = 66a55552d6746e62b08783af7253af94
20170823-Ver1.0.0.0001_foreign_A (Rootable) - MD5 (update.img) = 1d7eff1957827f68a025b5a4928f7295
20170913-Ver1.0.0.0001_foreign_A (Rootable) - MD5 (update.img) = d27bef19b6e361350b5b9217cba6d41b
201710XX-Ver1.0.0.0001_foreign_A (Rootable) - MD5 (update.img) = 7c5d98e63c7511ed8acbace071ca2b46
201711XX-Ver1.0.0.0001_foreign_A (Rootable) - MD5 (update.img) = fe9ae7a54ae7ae4cb2b90224f79ffcf0
Firmware that eliminates error "no Signal" dated 4/10/2018 (Link controlled by AVIN) (Rootable)
https://drive.google.com/file/d/1p1A...-1xw3K9xh/view
Latest MCU Update:
MD5 (update.nbd) = 988aa693c8e3922a5b250fc9b1693c4e
ROMs/.img's are able to be unpacked by proprietary RockChip Factory Tool v.5
Additional Firmware Decrypter tool (thanks @aclearersky)
https://drive.google.com/open?id=11f...OqmJ1ifV8VYO1s
This is what @aclearersky used to decrypt the apk files
https://forum.xda-developers.com/and...s-gui-t3333960
Overriding system 24 hour clock to force 12 hour format is possible, but requires shell scripting and either modification of system startup files or third party program. See post HERE
_____________________________________________________________________________
DO NOT SWITCH TO ART IN DEV SETTINGS AS IT CAN CAUSE A BOOTLOOP
_____________________________________________________________________________
build.prop dump (from August ROM):
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=KTU84Q
ro.build.display.id=rkpx3-eng 4.4.4 KTU84Q eng.zxw.20161219.165857 test-keys
ro.build.version.incremental=eng.zxw.20161219.165857
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.4
ro.build.date=2016年 12月 19日 星期一 16:59:21 CST
ro.build.date.utc=1482137961
ro.build.type=eng
ro.build.user=zxw
ro.build.host=zxw-ubuntu
ro.build.tags=test-keys
ro.product.model=rkpx3
ro.product.brand=rockchip
ro.product.name=rkpx3
ro.product.device=rkpx3
ro.product.board=rk30sdk
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=rockchip
ro.product.locale.language=zh
ro.product.locale.region=CN
ro.wifi.channels=
ro.board.platform=rkpx3
# ro.build.product is obsolete; use ro.product.device
ro.build.product=rkpx3
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=rkpx3-eng 4.4.4 KTU84Q eng.zxw.20161219.165857 test-keys
ro.build.fingerprint=rockchip/rkpx3/rkpx3:4.4.4/KTU84Q/eng.zxw.20161219.165857:eng/test-keys
ro.build.characteristics=tablet
# end build properties
#
# from device/rockchip/rkpx3/system.prop
#
#
# system.prop
#
#rild.libpath=/system/lib/libreference-ril.so
#rild.libargs=-d /dev/ttyUSB2
# Default ecclist
ro.ril.ecclist=112,911
ro.opengles.version = 131072
wifi.interface=wlan0
rild.libpath=/system/lib/libril-rk29-dataonly.so
rild.libargs=-d /dev/ttyACM0
persist.tegra.nvmmlite = 1
ro.audio.monitorOrientation=true
#NFC
debug.nfc.fw_download=false
debug.nfc.se=false
#add Rockchip properties here
ro.rksdk.version=RK30_ANDROID$(PLATFORM_VERSION)-SDK-v1.00.00 \
ro.rk.screenoff_time=-1
ro.rk.screenshot_enable=true
ro.rk.def_brightness=200
ro.rk.homepage_base=http://www.google.com
ro.rk.install_non_market_apps=true
sys.hwc.compose_policy=6
sys.wallpaper.rgb565=0
sf.power.control=2073600
sys.rkadb.root=0
ro.sf.fakerotation=false
ro.sf.hwrotation=0
ro.rk.MassStorage=false
ro.rk.systembar.voiceicon=false
ro.rk.systembar.tabletUI=false
wifi.interface=wlan0
ro.tether.denied=false
sys.resolution.changed=false
ro.default.size=100
persist.sys.timezone=Asia/Shanghai
ro.product.usbfactory=rockchip_usb
wifi.supplicant_scan_interval=15
ro.factory.tool=0
ro.kernel.android.checkjni=0
#set default lcd density to Rockchip tablet
ro.sf.lcd_density=160
ro.adb.secure =0
ro.telephony.default_network=9
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.carrier=unknown
ro.config.alarm_alert=Alarm_Classic.ogg
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=384m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
ro.sf.lcdc_composer=0
debug.hwui.render_dirty_regions=false
keyguard.no_require_sim=true
ro.com.android.dataroaming=true
ril.function.dataonly=1
persist.sys.strictmode.visual=false
dalvik.vm.jniopts=warnonly
ro.rk.bt_enable=true
ro.factory.hasUMS=false
persist.sys.usb.config=mtp,adb
ro.factory.hasGPS=false
ro.kernel.android.gps=ttyS0
ro.factory.storage_suppntfs=true
ro.factory.without_battery=true
ro.product.version=1.0.0
ro.product.ota.host=www.rockchip.com:2300
persist.sys.dalvik.vm.lib=libdvm.so
ro.kernel.android.checkjni=1
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
UPDATED: CarType.xml from October Update Package:
Code:
<?xml version="1.0" encoding="utf-8"?>
<cartype>
<model>
<id>1</id>
<name>1.F1X F2X F3X F4X(2013-2017)6.5inch</name>
</model>
<model>
<id>2</id>
<name>2.E60(2005-2010)6.5inch</name>
</model>
<model>
<id>3</id>
<name>3.E60(2005-2010)8.8inch</name>
</model>
<model>
<id>4</id>
<name>4.F1X(2011-2012)6.5inch</name>
</model>
<model>
<id>5</id>
<name>5.F1X F2X F3X F4X(2011-2012)6.5inch-full</name>
</model>
<model>
<id>6</id>
<name>6.F1X(2011-2012)10.25inch</name>
</model>
<model>
<id>7</id>
<name>7.F1X F2X F3X F4X(2013-2017)6.5inch-full</name>
</model>
<model>
<id>8</id>
<name>8.F02(2009-2015)10.25inch</name>
</model>
<model>
<id>9</id>
<name>9.F1X F2X F3X F4X(2013-2017)8.8/10.25inch</name>
</model>
<model>
<id>10</id>
<name>10.F1X(2011-2012)6.5inch-ADJ</name>
</model>
<model>
<id>11</id>
<name>11.F1X(2011-2012CIC)6.5inch</name>
</model>
<model>
<id>12</id>
<name>12.F1X(2011-2012CIC)6.5inch-full</name>
</model>
<model>
<id>13</id>
<name>13.G30(2018)8.8/10.25inch</name>
</model>
<model>
<id>14</id>
<name>14.E60(2004-2010)8.8inch</name>
</model>
<model>
<id>15</id>
<name>15.E65(2005)8.8inch</name>
</model>
</cartype>
UPDATE: factory.xml from October Update Package:
Code:
<?xml version="1.0" encoding="utf-8"?>
<factorys>
<factory>
<!-- all:common:普通客户；high-grade:优质客户； -->
<client>ALS</client>
<!-- BMW_NBT:宝马NBT； AUDI_A4L:奥迪A4L； BWM_EVO:宝马EVO； AUDI_Q5_1024x600:奥迪Q5_1024x600分辨率； BWM_EVO_UI2:宝马EVO新款 -->
<UI>BWM_EVO_UI2</UI>
<!-- DVD模块类型: 0:关闭 1: DVD软件1 2:DVD软件2(HLA) -->
<DVD_type>0</DVD_type>
<!-- A4L主页左边Logo: 0:不显示 1:A4L1(默认) 2:A4L2 3:A4L3 4:Q5 5:客户专用 -->
<A4L_Logo_Left>1</A4L_Logo_Left>
<!-- A4L主页右边Logo: 0:不显示 1:显示AUDI LOGO 和 高德导航信息 2:仅显示 AUDI LOGO -->
<A4L_Logo_Right>1</A4L_Logo_Right>
<!-- 奥迪主界面是否要滚动特效：0：否 1：是 -->
<Audio_Main_Scroll>1</Audio_Main_Scroll>
<!-- EVO主界面选择 0：公版 1：主界面第一页和第二页交换 -->
<EVO_Main_Interface_Select>0</EVO_Main_Interface_Select>
<!-- 工厂设置密码(4位数) -->
<password>1314</password>
<!-- AUX功能开关 （0关闭， 1打开）-->
<AUX_enable>0</AUX_enable>
<!-- DTV功能开关 （0关闭， 1打开）-->
<DTV_enable>0</DTV_enable>
<!-- DVR模块类型: 0:关闭 1: CVBS DVR 2:USB DVR（使用USB才可以设置下面的DVRApk_packageName，否则无法自定义） -->
<DVR_type>0</DVR_type>
<!-- USB DVR APK包名: 默认:凯富隆 (DVR模块类型为USB DVR时有效)-->
<DVRApk_packageName>com.anwensoft.cardvr</DVRApk_packageName>
<!-- GooglePlay: 0:关闭 1:打开 -->
<GooglePlay>0</GooglePlay>
<!-- 蓝牙开关: 0: 后装蓝牙 1: 前装蓝牙 注：协议这样 -->
<BT_type>0</BT_type>
<!-- 蓝牙模块: 0:文强BC5 1:文强BC6 -->
<BT_module>1</BT_module>
<!-- 第三方APK软件安装: 0:允许 1:禁止 注：协议如此 -->
<APK_install>0</APK_install>
<!-- 宝马原车CD主机设置: 1:阿尔派 2:哈曼 注：协议使用的是1，2 -->
<BMW_CD>1</BMW_CD>
<!-- AUX切换方式: 0:自动 1:手动 -->
<CarAux_operate>0</CarAux_operate>
<!-- 功放选择: 0:原车功放 1:外置功放盒 -->
<AMP_type>0</AMP_type>
<!-- 原车显示: 0:关（老款宝马X1） 1:开 -->
<CarDisplay>1</CarDisplay>
<!-- 同行者语音唤醒词: -->
<TXZ_wakeup>你好小微</TXZ_wakeup>
<!-- CCC_IDrive类型选择 0：IDrive_A 1：IDrive_B -->
<CCC_IDrive>0</CCC_IDrive>
<!-- EVO主界面选中图标是否放大 0：不放大 1：放大 -->
<EVO_main_interface_select_zoom>0</EVO_main_interface_select_zoom>
</factory>
</factorys>
Update: mapApkLst.txt from October update:
Code:
com.baidu.baidumaps
com.baidu.BaiduMap
com.baidu.navi.hd
com.mxnavi
com.mxnavi.naviapp
com.autonavi
com.cld
cld.navi.mainframe
cld.navi.c3588.mainframe
cld.navi.c2739.mainframe
cld.navi.c3551.mainframe
cld.navi.k3618.mainframe
cld.navi
com.kingwaytek
com.papago.M11General
com.papago.s1OBU
com.papago
com.loco
com.sygic.aura
com.txznet.txz
com.google.android.apps.maps
com.mireo.magnav
com.mireo.dontpanic.android.incyclone
com.waze
com.sogou.map.android.maps
com.tencent.map
com.mapbar.android.mapbarmap
com.mapbar.android.carnavi
com.nng.igoprimo.javaclient
com.nng.igo.primong.hun10th
com.navngo.igo.javaclient
com.basarsoft.igo.javaclient
com.basarsoft.igonextgen.javaclient
com.mapswithme.maps.pro
com.here.app.maps
ru.yandex.yandexnavi
Thanks for starting this here. (same member name for me at Bimmerforums) I'll start with the original link - http://f30.bimmerpost.com/forums/showthread.php?t=1374452&page=19
--------------------------------
Found a few launchers that might work better:
https://play.google.com/store/apps/d...rwebguru&hl=en
https://play.google.com/store/apps/d...ncher.motorcar
https://play.google.com/store/apps/d...es.carlauncher
Trying at least one over the weekend myself as there is practically no use for the stock launcher after removing the Stock Browser, Altered AVIN Music App and Altered AVIN Video Apps. (crashes HOME launcher when selecting now)
Too simplified for me but this might work well for others: https://play.google.com/store/apps/d...nus.launchertv
SetCPU works (with root) to change governors - set to INTERACTIVE by default
jeffc83 said:
SetCPU works (with root) to change governors - set to INTERACTIVE by default
Click to expand...
Click to collapse
Thanks for coming over bud.
Have you experienced any issues with the governors thus far, besides a potential overheating that you mentioned back in F30post?
CleanKM said:
Thanks for coming over bud.
Have you experienced any issues with the governors thus far, besides a potential overheating that you mentioned back in F30post?
Click to expand...
Click to collapse
No issues to report with any of them and I did see a performance boost when set to PERFORMANCE since it keeps it maxed out all the time. My next step is to set it on boot to: OnDemand -> Min CPU 450mhz and Max CPU 1200. I also want to try and UNDERCLOCK it to see if that helps any. I would then go back to Interactive -> Min CPU 125mhz and Max 1000. On the commute home, I am planning on trying one new launcher and setting that CPU to option 1.
Interested in how the new launcher's work. Also if there is a way to intercept the CAN bus buttons.
I installed AG Launcher and this was a pic while driving. Since then, I have customized it to launch what the hell I want lol. I'll grab more pics tomorrow and might even try another!
https://1drv.ms/i/s!AkHKmnTUFIO1g5E7iZgHVqcobfpZfA
Coming over from BimmerPost as well to talk about Android specific topics. How do you physically connect to the screen to start root? Did you guys use a laptop to do that?
daxtor said:
Coming over from BimmerPost as well to talk about Android specific topics. How do you physically connect to the screen to start root? Did you guys use a laptop to do that?
Click to expand...
Click to collapse
No laptop needed for this unit. KingRoot is able to root it through its app. Then use SuperSume to remove KingRoot since it's bloated with adware.
Sent from my iPhone using Tapatalk Pro
Was warm today and the Android aide of the unit just **** the bed. Said no signal on the screen after using it for about a minute. Luckily the OEM side was fine. Not a happy camper.
Once I got to my destination and started car again, everything seemed to work fine.
Sent from my iPhone using Tapatalk Pro
My screen died completely today: it got stuck with the BMW logo and won't boot up properly. I contacted Avin nd was given a newer ROM dated August and instruction to reflash it using the SD card. I am now able to use it again. Let's see how long it will stay running this time and hope the new ROM is more stable.
Also check out this thread: https://forum.xda-developers.com/an...usa-bmw-android-4-4-2-multimedia-nav-t3489042
I stumbled upon this and was very interested. Even more when you guys started rooting it. Not trying to be rude, but unfortunately this just seems to be old, outdated and slow consumer grade hardware.
Another question I'm asking myself: Where is the difference between one of these random chinese headunits and this avinusa model? Seems to me they are just reselling for a higher price.
I was really excited for this to work because I have the old CHAMP2 headunit but seeing the thread linked above the aspect ratio is completely off.
Anyway, I basically just wanted to give you guys the link to the thread and wish you the best of luck to make something useful out of this
daxtor said:
My screen died completely today: it got stuck with the BMW logo and won't boot up properly. I contacted Avin nd was given a newer ROM dated August and instruction to reflash it using the SD card. I am now able to use it again. Let's see how long it will stay running this time and hope the new ROM is more stable.
Click to expand...
Click to collapse
Do you mind sharing a link to the ROM that Avin passed along? Can you take a picture of what you have in the system info screen (where the build numbers are, etc)?
Sent from my iPhone using Tapatalk Pro
Waze was completely unbearable last night. Had to use Google Maps instead which worked without a problem...Seems to be luck of the draw with this thing.
Sent from my iPhone using Tapatalk Pro
Firefly1337 said:
Also check out this thread: https://forum.xda-developers.com/an...usa-bmw-android-4-4-2-multimedia-nav-t3489042
I stumbled upon this and was very interested. Even more when you guys started rooting it. Not trying to be rude, but unfortunately this just seems to be old, outdated and slow consumer grade hardware.
Another question I'm asking myself: Where is the difference between one of these random chinese headunits and this avinusa model? Seems to me they are just reselling for a higher price.
I was really excited for this to work because I have the old CHAMP2 headunit but seeing the thread linked above the aspect ratio is completely off.
Anyway, I basically just wanted to give you guys the link to the thread and wish you the best of luck to make something useful out of this
Click to expand...
Click to collapse
Thanks for the link to the thread buddy! I agree that this is most likely outdated consumer grade hardware. Besides the brand name and "support", I doubt there is a difference been the no name units. I mean the interfaces basically look the exact same.
Sent from my iPhone using Tapatalk Pro
We might as well start documenting the MCU, OS, and APP versions that are floating around. Looks like AVIN send updates adhoc to people who are having issues instead of having a centralized update server.
Mine:
MCU: 0120aJLY-NBT-
OS: 3.0.36+ Mon Dec 19 16:58:22 CST 2016
APP: 20170711-Ver1.0.0.0001_foreign_a
I basically replaced the launcher today with one that is more customizable. Can't post links yet, but it's FCC Car Launcher on Play Store. Disabled Several system services and such. Also dumped the build.prop file, it is edited in the first post.
anything we can do somehow to keep this thing from going into 24 hour time drives me crazy.
CleanKM said:
Do you mind sharing a link to the ROM that Avin passed along? Can you take a picture of what you have in the system info screen (where the build numbers are, etc)?
Sent from my iPhone using Tapatalk Pro
Click to expand...
Click to collapse
I can't post link as I am a new user as well, but you can go to google drive using this:
drive.google.com/file/d/0B5csZBhSUqg2eEw4S05FSWVQMDg/view?usp=sharing
I have attached a picture of the build info.
daxtor said:
I can't post link as I am a new user as well, but you can go to google drive using this:
drive.google.com/file/d/0B5csZBhSUqg2eEw4S05FSWVQMDg/view?usp=sharing
I have attached a picture of the build info.
Click to expand...
Click to collapse
Thanks for the file. Just updated mine. Can confirm it breaks root. EDIT: KingRoot/SuperSume process works fine in order to restore root.
Sent from my iPhone using Tapatalk Pro
I disabled the EZ Browser (the AirPlay/Mirroring App) in the system as well since i never used the functionality, would pop up randomly, and unneeded resource drain.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TeamHorizon's XenonHD rom builds forXiaomi Redmi 5 Plus (vince)
http://www.xenonhd.com/
XenonHD is a custom firmware aka ROM for various Android devices. It is based on LineageOS 16.0 with additional features, performance and battery life improvements.
The idea behind XenonHD is to give users a ROM that is "blazing fast, rock stable and buttery smooth".
Device Source:
android_device_xiaomi_vince
android_kernel_xiaomi_msm8953-4.9
android_vendor_xiaomi
Download Links:
ROM: Official | Experimental
Gapps: opengapps.org
Changelog: ExperimentalFlashing Instructions:
To install this ROM you will need to have a latest custom Recovery such as TWRP installed.
Copy the downloaded ROM to your phone.
Boot into your recovery
Back up your ROM
Make a full wipe (system, data, cache, dalvik)
Install the ROM
Install GAPPS package
Reboot - the first boot can take up to 5 minutes
Installing updates:
Copy the downloaded update to your phone.
Boot into your recovery
Back up your ROM
Install the update
Optionally wipe caches
Reboot
Other Links:
Github
Google+
Telegram
XDA:DevDB Information
Official XenonHD 9.0 ROM by TeamHorizon, ROM for the Xiaomi Redmi Note 5 / 5 Plus
Contributors
rama982, LuanHalaiko, dadi11
Source Code: https://github.com/TeamHorizon
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Minimal MIUI China 9.3.28
Based On: LineageOS
Version Information
Status: Testing
Created 2019-02-10
Last Updated 2019-05-12
[SIZE=+1]Changelogs[/SIZE]
12.05.2019 (UTC+8)
Tag android-9.0.0_r37 (May Security Patch)
HALs tag LA.UM.7.5.r1-04800-8x96.0
vince: Update common blobs from Tissot V10.0.7.0.PDHMIXM
vince: Kill HIDL ANT+ support
vince: Decommonize Qualcomm variant of RIL daemon
vince: sepolicy: Update and Adresss more fingerprint denials
vince: Add vendor prefix to persist.sys.usb.config.extra
vince: Restart audio HIDL HAL after decryption
vince: Increase in-call earpiece volume
vince: kernel: Use Fate Kernel
XenonHD: DisplaySettings: font size in 5% steps from 80% to 130%
XenonHD: SystemUI: Bring back lockscreen tuner
XenonHD: lockscreen: Forward port option to pass swipe-up-to-unlock
XenonHD: Settings: Add high touch sensitivity and touchscreen hovering toggles
XenonHD: apns : Update the KT IMS apn
XenonHD: apns: Update IRAN APNs
XenonHD: Trebuchet: Disallow status bar swipe on widgets sheet
XenonHD: SystemUI: Fix double-tap to cam. opens right lockscreen shortcut
XenonHD: See Changelog.txt for full logs
18.04.2019 (UTC+8)
Initial Selinux ENFORCING
14.04.2019 (UTC+8)
First Official build
xenonhd: XenonOTA: wipe more partitions on clean flash
xenonhd: Exclude Emergency Dialer from recent app list
xenonhd: Fix EmergencyDialer UI when display size change
xenonhd: Disable EmergencyDialer multi window mode
xenonhd: Change UI styles to match dialer settings light M2 theme
xenonhd: Change UI to be consistency with dialer settings light M2 theme
xenonhd: LightSettingsDialog: create and use notification channel
xenonhd: base: fix reboot tile dialog
Updated audio/display/media HALs and cryptfs_hw to LA.UM.7.5.r1-04500-8x96.0.
vince: rootdir: Update from LA.UM.7.6.2.r1-08100-89xx.0
vince: prop: Add back use_fifo_ui
vince: prop: Add dex2oat thread count
vince: Explicitly disable rild OEM hook implementation
vince: Remove non-existing HAL services
kernel: Updated to CAF LA.UM.7.6.2.r1-08100-89xx.0
08.04.2019 (UTC+8)
xenonhd: android-9.0.0_r35 tags
xenonhd: April security patch
xenonhd: healthd: make periodic battery status a debug message
xenonhd: Move the rotation setting to the "normal" SettingsProvider
xenonhd: Update bluetooth drawable
vince: Update thermal config
vince: Revert statusbar height
kernel: Rebased
kernel: Merged latest android-4.9-p branch from google kernel/common
kernel: Improve F2FS stability
vince: 100% REALLY Fixed thermal issue on 4.9 kernel
kernel: 4.9.168 upstream
xenonhd: QS: Add Reboot/Recovery QS Tile
01.04.2019 (UTC+8)
Started this build user must on firmware miui 9.3.28+.
vince: Minor updates from MIUI 9.3.28 (trustzone version, build fingerprint, blobs)
vince: Minor updates on rootdir
Revert "vince: wifi: remove libcld80211 package" (because broke wifi display)
vince: Update config_safe_media_volume_index overlay
kernel: 4.9.166 upstream
24.03.2019 (UTC+8)
xenonhd: SystemUI: Fix FORCE_SHOW_NAVBAR handling on user switch
vince: Thermal-conf: set the correct thermal by klozz (@TeamMEX_XDA )
vince: Limit hotspot to 12 devices
vince: wifi: set beacon missed count threshold (to improve wifi stability)
vince: Update WCNSS_qcom_cfg.ini from deen
vince: overlay: Disable dreams by default
vince: Set formattable flag only for ext4 userdata partition
vince: Enable workaround for old MCC/MNC format (fix manual network selection, untested)
vince: Enable full dexpreopt
kernel: 4.9.165 upstream
kernel: F2FS stable upstream to tag 5.1-rc1-4.9
19.03.2019 (UTC+8)
ROM: Volume panel: Fix animation
ROM: Add APN ION Mobile & APN for Roaming
ROM: Update Bluetooth to use adaptive icon.
ROM: Clean up screenshot if nothing selected
Device: Update GPS HAL from LA.UM.7.6.r1-04300-89xx.0
Device: Update thermal-conf for 4.9 by klozz
Device: Update /data f2fs mount flags
Device: post_boot: Set zram dedup flag
Device: Drop MiuiCamera, use Snap
Kernel: Merged linux stable 4.9.163
Kernel: Merged CAF Tag LA.UM.7.6.2.r1-07300-89xx.0
11.03.2019 (UTC+8)
ROM: android-9.0.0_r34 merged
ROM: March security patch
ROM: Settings: fix eject sdcard icon color
ROM: effects: Initialize volume at -96
ROM: xenonhd: update SoundPicker & Turbo
* Device Health Services 1.7.0.231232376.release
* Sounds 2.0.1 (226190645)
Device: Improve stability
Device: Add QC RIL service blobs
Device: Set voice call volume steps to 7
Device: Media volume: from 15 to 25 steps
Device: Set dpi to 440
Device: Disable audio ULL mode to fix audio distortion
Device: audio: Switch to Low Latency playback
Device: Set all sidetone IIR volume to 53
Kernel: Merged linux stable 4.9.162
Kernel: Merged changes from lineage-16.0
26.02.2019 (UTC+8)
Device: Update pie blobs from tissot V10.0.5.0.PDHMIXM (also revert perf and thermal changes)
Device: Update vendor security patch to feb 2019
Device: Update properties build.prop
Device: Fixed animation lag issue
Device: Update SDM blobs from Nokia 6 (Fixed blink issue reported by user)
Device: gps: Disable xtwifi related services (fixed logs spam)
24.02.2019 (UTC+8)
ROM: SystemUI: Make recents grid view accept more than 8 tasks
Device: Enable option for full screen aspect ratio (settings->display->full screen apps)
Device: Add default brightness
Device: Back to MiuiCamera
Kernel: Rebase to LineageOS msm8953
Kernel: Merged linux stable 4.9.160
Kernel: Merged latest google aosp changes
20.02.2019 (UTC+8)
ROM: Fixed statusbar settings
ROM: Fix light statusbar and navbar on Wellbeing
ROM: Move "About Phone" to bottom of Settings
ROM: Update some APNs
Device: Back to QCOM power HAL again
Device: Power HAL: Update to LA.UM.7.6.2.r1-05700-89xx.0
Device: Kill QC location provider
Device: Revert GCam, back to Snap
Device: Update power profile
Kernel: Added support for TTL fixation
Kernel: Add Sound Control
Kernel: Cleanups and core update
19.02.2019 (UTC+8)
XenonHD 9.0 vince now Official
Kill QC location provider
Revert GCam
Update power profile
Revert qcom power HAL
17.02.2019 (UTC+8)
XenonHD source sync
Use Custom Thermal HAL and config for 4.9
Updated device tree
Use GCam as stock camera
kernel: Merged 4.9.158
kernel: Remove devfreq boost
kernel: Overclock adreno506 GPU to 725Mhz like sdm632
15.02.2019 (UTC+8) V2
Enable Camera hal 3 api by default
Fix mac adress wifi
Kernel: Upstreamed to 4.9.157
Kernel: Add devreq boost driver
Kernel: Remove Adreno Idler
Kernel: Add back cpu boost
Kernel: Set gpu idle timeout to 64ms
Kernel: Set gpu initital pwrlvl to 133Mhz
15.02.2019 (UTC+8)
XenonHD source sync
android-9.0.0_r31 tag
February security patch
Drop MiuiCamera, back to snap
Updated camera properties
Add power off alarm service
Update rootdir
Update dirac property
Migrate to livedisplay 2.0
Adjust statusbar height
Kernel: Upstream to 4.9.156
Kernel: Merge tag 'LA.UM.7.6.2.r1-06900-89xx.0'
Kernel: Added thing like:
- Kcal Color Control
- Adreno Idler
- fsync on/off support
- Vibration control
- Boeffla wl blocker
- BFQ io scheduler
10.02.2019 (UTC+8)
First Experimental build for XDA.
[SIZE=+1]Notes[/SIZE]
Whatsapp green when cam2api enabled
Any other issues that come directly from LineageOS
reserved
nice.... thx for bring the 4.9 to our lovely vince sir
New kernel, sounds interesting!
Ouh thank you anyway for bringing another wonderful job
nice work first rom with 4.9 for vince keep it up rama
wow kernel 4.9
thx
omg F2FS support thx
Hi! What are the advantages of 4.9 kernel in this device vs 3.x.x available kernels?
Thanks!
Wyneg said:
Hi! What are the advantages of 4.9 kernel in this device vs 3.x.x available kernels?
Thanks!
Click to expand...
Click to collapse
Same advantages as 4.9 devices, better security, new features and etc
Fingerprint is very responsive
for Gaming is excellent too
and about Battery i think so far is good enough
Good job Kang Bondan aka rama and LuanHalaiko
Keep it up Kang
rama982 said:
Known bug: Camera green result, use Gcam for temporary fix
Click to expand...
Click to collapse
Can you provide link please?The original one from Telegram group is not starting even after adding camera hal 3 line to build prop.
I have issues with the fp scanner. (Goodix)..I cant wake up the phone after the device goes to deep sleep. I try all the roms with the new kernel.
Enviado desde mi Redmi 5 Plus mediante Tapatalk
Cocolopes said:
I have issues with the fp scanner. (Goodix)..I cant wake up the phone after the device goes to deep sleep. I try all the roms with the new kernel.
Enviado desde mi Redmi 5 Plus mediante Tapatalk
Click to expand...
Click to collapse
If scanning the fp didn't waking up the screen, just press power button and will instantly unlocking the screen. That's weird, but it works
New build is up.
Updated changelog and know issue
rama982 said:
New build is up.
Updated changelog and know issue
Click to expand...
Click to collapse
thanks for update sir:good:
rama982 said:
New build is up.
Updated changelog and know issue
Click to expand...
Click to collapse
thx rama
bugs found so far on latest build
no play store downloading notification
after restarting, i cant connect to my wifi, says cant save it, tried reflashing rom, another kernel, did no good
haven't tested other places yet, the wifi bug is a major one
but its really smooth, and had perfect idle battery drain, (when nothing was still installed).
pesartom said:
bugs found so far on latest build
no play store downloading notification
after restarting, i cant connect to my wifi, says cant save it, tried reflashing rom, another kernel, did no good
haven't tested other places yet, the wifi bug is a major one
but its really smooth, and had perfect idle battery drain, (when nothing was still installed).
Click to expand...
Click to collapse
my wifi is working fine, because i dont have sim for vince so i always use wifi
notification is roms issue
Jancok Kernel is a custom kernel for MI 8 SE a.k.a Sirius which has a lot of features comparing to stock kernel. Our goal is to bring stability and best performance. Don't ask xyz features, if the kernel itself is stable AF, I'll add more features ASAP.
CAUTION: I AIN'T RESPONSIBLE IN ANYTHING IF SOMETHING GOES WRONG!
Features:
- Add maple iosched
- Enable maple by default
- Remove 10 ms CPU idle latency unvote timeout
- Only apply pm_qos to the CPU servicing Ufs Interrupts
- Set idle time out to 64ms
- Add sound control
- Don't copy fence names by default
- Disable adreno driver logging
- Add NEON accelerated XOR implementation
- Do not collect I/O statistics
- Add KLAPSE v5
- Add TTL support
- Disabled some gov
- F2FS support
- Build with latest clang version
- EAS
- And many others
Bugs:
- For MIUI-based ROM, flashlight on setting tile and internet indicator do not work ATM.
MOD EDIT: Telegram link removed, please read the STICKY!
Contributor:
- Icecream
- Solidv
- My beloved testers :good:
Kernel Tree:
https://github.com/1cecreamm/kernel_xiaomi_sirius
Jancok Kernel V-1.1
Changelog:
- Added fsync on/off support
- blk: Disable IO_STAT completely
- Enabled advanced TCP
- Set westwood by default
- Don't require auditing
- Don't allocate memory for logging
- Implement usb fast charge mode
- Only compile adreno 6xx driver
- Relax adreno spin idle tight loop
- Add wireguard importer
- set the vm_dirty_ratio to 40
- Apply EAS tunings
Download: MOD EDIT: Link removed
Very good news
Jancok Kernel V-1.4
Changelog:
- Finally, the error message on AOSP-based ROM after reboot is fixed
- Add anxiety I/O sched
- Kill opening/closing instance logspam
- Keep dirty pages in ram for at least 120 sec
- Enable NTFS & F2FS
- Increase ratelimit pages value
- Improve Internet connection
- Increase vmstat interval
Download: MOD EDIT: Link removed
Jancok Kernel V-1.8
Changelog:
- Merge to 4.9.213
- Disable fsync by default
Download: MOD EDIT: Link removed
can I install on Xiaomi.eu?
Kikuchiex said:
can I install on Xiaomi.eu?
Click to expand...
Click to collapse
Yes, you can. But, you'll face bugs that already mentioned on OP
Jancok Kernel V-2.1
Changelog:
- Introducing sLMK
- Support sdFAT exFAT
- Added back KCAL
- Default readahead 64kb
Download:
MOD EDIT: Telegram link removed, please read the STICKY!
dimasyudha said:
Jancok Kernel V-2.1
Changelog:
- Introducing sLMK
- Support sdFAT exFAT
- Added back KCAL
- Default readahead 64kb
Download:
MOD EDIT: Telegram link removed, please read the STICKY!
Click to expand...
Click to collapse
Is link dead?
AsusZenFone3Deluxe said:
Is link dead?
Click to expand...
Click to collapse
Here we go
MOD EDIT: Telegram link removed, please read the STICKY! [/url]
Thread closed
Requested by OP, cause he is not the developer and no further updates by the original developer.
strongst
Forum Moderator