[Guide] How To Unbrick Xperia X8 | Kernels | Tweaks | ROM | Extra - XPERIA X8 General
Intro
I know there are a thread with specific with this thread
but this thread will be much solution
Old Link (Graveir) = Xda
Warning: There are Soft Brick/Hard Please Be carefull with flashing and unlocking.
Soft Brick:
For NoObs said "bootloop"
this is a soft brick and easy to be fixed
Solution:
Xrecovery:
Use Backup (If you Did This) This is the easy way
FlashTool:
Flashtool is a software developed for Xperia X10, It Supported On X8
Tutorial:
1. Download latest version from this thread: Xda
2. ROM Image, Contain Russia and Generic :
2.1.1.A.0.6 Generic
Russia 2.1
3. Baseband Collection (Blagus) Many Custom Rom Use M76XX-TSNCJOLYM-53404015 which mean its xxx15 use it in this blagus folder
Mediafire
4. Place ftf file in /firmwares directory of your flashtool.
5. Install drivers from /drivers directory
6. Prepare yourself - plug the USB cable to the computer and launch flasher.
7. Click "flash", choose your ROM from the list, Wait for instructions.
8. When the instruction pops up, press and hold "back" button on your X8 and plug the cable into it. Keep holding untill you see that flashing of files has begun, then you may release it.
9. Flashing will take a while, you may observe the progress on a bottom bar. When it's finished you will be asked to plug off your device and reboot it.
10. If you wish to change baseband, clean firmware directory in flashtool and place baseband ftf file in it, then go through flashing procedure again.
11. If you try this correctly your phone will work again
Hard Brick:
Device Not power up, Xrecovery/CWM not working, Extreme Brick
Solution:
This instructions are software related only not for hardware
Seus/PCC:
This is easiest way to unbrick your x8
PCC:SonyEricsson
Seus: Seus is outdated and not continued
Instruction:
1. Click Support zone
2. Click Phone update (Don't connect your phone)
3. Click "repair phone"
4. Follow onscreen instruction
5. Done,Enjoy
FlashTool:
Flashtool is a software developed for Xperia X10, It Supported On X8
Tutorial:
1. Download latest version from this thread: Xda
2. ROM Image, Contain Russia and Generic :
2.1.1.A.0.6 Generic
Russia 2.1
3. Baseband Collection (Blagus) Many Custom Rom Use M76XX-TSNCJOLYM-53404015 which mean its xxx15 use it in this blagus folder
Mediafire
4. Place ftf file in /firmwares directory of your flashtool.
5. Install drivers from /drivers directory
6. Prepare yourself - plug the USB cable to the computer and launch flasher.
7. Click "flash", choose your ROM from the list, Wait for instructions.
8. When the instruction pops up, press and hold "back" button on your X8 and plug the cable into it. Keep holding untill you see that flashing of files has begun, then you may release it.
9. Flashing will take a while, you may observe the progress on a bottom bar. When it's finished you will be asked to plug off your device and reboot it.
10. If you wish to change baseband, clean firmware directory in flashtool and place baseband ftf file in it, then go through flashing procedure again.
11. If you try this correctly your phone will work again
Coma Brick:
Device wont power on at all or respond to button input
Don't worry ok
Solution:
Charge your phone with main supply (not usb) let it charge fully 4 hours
It will start again. Battery big icon will appear around 30% battery charged
Let it full or boot up
Loader Brick:
This because of false instruction of unlocking bootloader or flashing kernel
Solution:
Relock, PCCompanion
A. Relock your bootloader
B. Use PCC to restore your phone
Instruction For PCC :
1. Click Support zone
2. Click Phone update (Don't connect your phone)
3. Click "repair phone"
4. Follow onscreen instruction
5. Done
Kernels:
There are kernel for x8 with much new feature
LinuxDX: Xda
Doixanh special kernel with much features
Pros: Has much Features, little bit improved perfomance
Cons: Only for GingerDx, Sometimes fast but Sometimes Slow, No OC
Alfs Xda
Alfsamsung kernel with fast perfomance
Pros: Fast perfomance, Much features, VR I/O scheduler
Cons: FPS Uncap
nAa: Xda
nobodyAtall kernel with bunch of features
Pros: Best features with (Tun/Tap, Ramzswap for compcache)
Cons: Partially Supported
FXP: Xda
FreeXperia kernel standard feature for official cm7
Pros: Fully working netfilter/iptables/ap, standard feature
Cons: Only Supported only Fxp or official cm7 rom
Download For FXP kernel:
All Fxp: Contain all kernel Here @ Skydrive
Build.prop tweaks
Code:
# Raise JPG quality to 100%
ro.media.enc.jpeg.quality=100
# VM Heapsize; 178MB RAM = 32 is better
dalvik.vm.heapsize=32m
# Render UI with GPU
debug.sf.hw=1
# Decrease dialing out delay
ro.telephony.call_ring.delay=0
# Helps scrolling responsiveness
windowsmgr.max_events_per_sec=150
# Save battery
wifi.supplicant_scan_interval=180
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
# Disable debugging notify icon on statusbar
persist.adb.notify=0
# Increase overall touch responsiveness
debug.performance.tuning=1
video.accelerate.hw=1
# Photo and video recording quality tweak (2.3 Rom only)
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=800000
# Photo and video recording quality tweak (2.2 Rom only)
ro.media.dec.jpeg.memcap=10000000
ro.media.enc.hprof.vid.bps=1000000
# Photo and video recording quality tweak (Official ROM only)
ro.media.dec.jpeg.memcap=10000000
ro.media.enc.hprof.vid.bps=1600000
# Internet tweaks
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.hep=1
ro.ril.hsdpa.category=10
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=6
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
ro.ril.enable.sdr=1
ro.ril.enable.gea3=1
ro.ril.enable.fd.plmn.prefix=23402,23410,23411
ro.ril.enable.a52=1
ro.ril.enable.a53=1
ro.ril.enable.dtm=1
# NetSpeed tweaks
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
# Disable blackscreen issue after a call
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Fix some application issues
ro.kernel.android.checkjni=0
# Phone will not wake up from hitting the volume rocker
ro.config.hwfeature_wakeupkey=0
# Force button lights on when screen is on
ro.mot.buttonlight.timeout=0
# Disable boot animation for faster boot
debug.sf.nobootanimation=1
# Enable Stagefright helps stream Video and Music Faster
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
# Enable display Dithering
persist.sys.use_dithering=1
# Enable purgeable assets
persist.sys.purgeable_assets=1
# For SD storage insert notification sound
persist.service.mount.playsnd=0
Local.prop tweaks
Code:
ro.FOREGROUND_APP_ADJ=0
ro.VISIBLE_APP_ADJ=3
ro.PERCEPTIBLE_APP_ADJ=2
ro.HEAVY_WEIGHT_APP_ADJ=4
ro.SECONDARY_SERVER_ADJ=5
ro.BACKUP_APP_ADJ=6
ro.HOME_APP_ADJ=2
ro.HIDDEN_APP_MIN_ADJ=7
ro.EMPTY_APP_ADJ=15
ro.FOREGROUND_APP_MEM=1536
ro.VISIBLE_APP_MEM=2048
ro.PERCEPTIBLE_APP_MEM=1024
ro.HEAVY_WEIGHT_APP_MEM=6656
ro.SECONDARY_SERVER_MEM=6656
ro.BACKUP_APP_MEM=7168
ro.HOME_APP_MEM=1024
ro.HIDDEN_APP_MEM=7168
ro.EMPTY_APP_MEM=8192
SuperCharger:
OOM grouping fixed + minfree tweaks
Credit: zeppelinrox
Download: Xda
Minfrees & Adj Stick
Instruction:
1.In /etc/hw_config.sh write this line
Code:
sh /etc/minfreeadjstick.sh
2.then, create a file (not folder) called minfreeadjstick.sh in /etc
3.open it and write this lines inside
Code:
# Script to make minfrees and adj stick (Credits to Zeppelinrox)
sleep 40
echo "0,3,5,7,14,15" > /sys/module/lowmemorykiller/parameters/adj
echo "1536,2048,6656,7168,7680,8192" > /sys/module/lowmemorykiller/parameters/minfree
echo "0" > /proc/sys/kernel/panic
echo "0" > /proc/sys/vm/oom_kill_allocating_task
echo "0" > /proc/sys/vm/panic_on_oom
echo "1" > /proc/sys/kernel/panic_on_oops
echo "0" > /proc/sys/kernel/panic
# end of script
1. Froyobread : This Rom is a great choice for beginners, its stable and fast. it's core cm6. Android 2.2, a great upgrade if you are still using the 2.1 stock eclair this is the best upgrade,, many hail this as the best stable ROM there is, its full of features, it delivers smooth performance, and i have found it to be very stable. so if your new just use this, you will be satisfied
Link
Pros : Still considered the most stable Rom, Fast and Smooth Performance, Good app Performance, android 2.2 has greater app support, most features work without any problems, little or no bugs, one of the most famous rom so if you have any problem lot of people out there to help you
Cons: Android 2.2 has become old many people prefer Android 2.3 over it. Not as Smooth as gdx when it comes to scrooling, according to some people Wifi does not work(it worked for me though)
2.Hackdroid: A decent rom, flashy and stylish, sometimes laggy. but overall a very good room. great for starters, however many people stated this one to be a little unstable , but it really depends on what apps you run if you are looking for a good looking rom with visual features this one is a pretty good choice
Link
Pros: Very Customizable, Decent Performance, Stable if you stick to normal apps, Has more features than most Roms
Cons: A little Laggy, Sometimes Unstable, Many people have Reported bugs in this rom. Other Roms Offer Superior Performance
3.KuyaDroid: This one is an awesome rom, solid and stable, fast performance smooth menu and everything is decent. Its a good rom if your into gaming as it has built in Overclock, Undervolt, and gesture.(note these features can be manually added on other roms too). One more noticable thing about this rom is that it's core is cm7, and android version 2.3( a big update from the stock 2.1)
Link
Pros: Very fast app performance, Smooth Scrooling, Android 2.3, Wide Range of Users so you will easily find solutions if you face any problems, Overall Solid CM7 Rom.
Cons: Lacks Features that are available on Gingerdx, Some Reported Bugs, some apps force closes
4.GingerDX: This is update of the Famous Froyobread, So far its fast and stable although a few bugs have been reported but its one of the most stable and working cm7 , android 2.3 roms around. its definitely worth a try if you want a fast and smooth working rom. also it has some pretty good features more than most roms out there to exact. Many people state this is the best Cm7 rom out there
Link
Pros: One of the Smoothest CM7 Rom i have used, Full of features, Customizable, Most apps work without any problem, Regularly Updater, Wide range of users so you will easily find solutions if you do face any problem, Upgraded Camera
Cons: People claim it to be not as Stable as Froyobread, Some minor bugs still needs to be fixed, Some features and still needs to be more polished and stable, updates have recently slowed down
5.BehradGH: this one is a light and simple rom, not a bad choice for newbies but it does not have as much customizable features as the other roms, its a good rom for starters,, so if your looking for a simple rom and an upgrade from your stock rom you should try this one
Link
Pros: Light Rom, Good for Average Daily apps, Simple rom without complications. Simple Upgrade from the Stock Rom
Cons: Powerful Games Such As Nova, MC Sandstorm often Force closes, Some Reported Bugs, A little unstable while Performing Certain Operations
6.GingerCruzt: Just tested this Rom Recently , And boy was i surprised , good performance and good looks, which is something very hard to get in one rom. in some cases better than GDX, but not as stable when running apps, but for normal daily use this one beats most of the roms out there. also it has a very similar look to the stock android. so if your into stock looks, try this out. also its android 2.3 /Cm7.
Link
Pros: New and fresh, Decent Performance and Features, Not bad for daily use, most apps work without problem, Android 2.3. the new look is unique(gc 8.1 and after)
Cons: The Creator of the Rom is not really Co operative since he is not really active on XDA, Minor bugs, Is not updated as regularly as other Roms, Lacks advanced Features that available on other Cm7 Roms
7.Krauser-SROM: Recently Tested this Rom, this uses a lot of Froyobreads Features, Its fast and stable , not a bad choice if you want try something other than those famous roms, i found it to be really decent rom. Not bad for daily normal usage
Link
Pros: Simple Lightweight Rom, Most apps work, Stable and Smooth
Cons: Some FC on apps, Community of its users is not as big as Froyobread, Android 2.2, Doesn't have much features as some of the other roms
8.GingerXperia: Its new and its great! this rom is pretty good, and i actually find it to be even faster than gdx,Yes it lacks the features which gdx offers but if you can make do without those advanced features this is the rom for you, its also reported to be stable and smooth , its bugfree though but hopefully it will be fixed on future updates
Pros: Very fast, Simple Rom, Light weight, Good app performance, Stable Rom, the rom's creator used a lot of contents from other roms without taking permission from them
Cons: Lacks some Features, some bugs, New so the community is still small, got worse with recent updates
This is A Great Rom but creator not taking credit from other rom
9.Fd xperience: One of the better new roms, it has a stock look which is sure to attract many people, if you want to upgrade but do not want tolose your stock looks and yet have a stable upgraded rom this is the rom for you, its smooth and fast better than most roms out there, But it has some bugs and support issues, and i got some fc when playing games on it , other than that its very stable and fast
Link
Pros:Fast,Stock look, Stock apps, good app performance, Smooth scrooling,
Cons: The contacts app is very slow, The music player lacks features, Some 3d games FC, the new updates boasted looks but slowed down performance
10.Official CM7: Standard rom with lack of camera, fm, live wallpaper
Pros: Officialy supported by cyanogenmod
Cons: Buggy ,Camera (VGA), FM
11.Xgin: One better continued rom, it fast and stylish continued by rieken yuki build by shpit
Pros: Fast, Stylish, Walkman style
Cons: Heavy Rom
Extra Section
Root, Busybox, DualRecovery, Jit With X8toolbox:
this is the simple way for NoObs
1. Download Here @ Xda
2. Extract
3. Open x8toolbox.cmd
4. Follow on-screen instructions
Guide How to unlock bootloader and relock : Here @ Xda
Wifi Extra
This wifi extra will enabling N standard and 5ghz band
1. go to /system/etc/firmware
2. find this file name
Code:
fm_rx_init_1273.2.bts
fm_tx_init_1273.2.bts
fmc_init_1273.2.bts
3.Are they there? good you will have 5ghz band. Are they not there? you wont get 5ghz band
4.Go to /system/etc/ and find tiwlan.ini Note: In CM7 based ROMs the path may be /system/etc/wifi
5.Look for the following lines:
Code:
HT_Enable=0 #0=disable 802.11n support / 1=Enable
BurstModeEnable = 0 # 0 - Disabled 1 - Enabled
WiFiAdhoc = 0
And Change them into
Code:
HT_Enable=1 #0=disable 802.11n support / 1=Enable
BurstModeEnable = 1 # 0 - Disabled 1 - Enabled
WiFiAdhoc = 1
6. This stage is for people who have file from step 2
Look for the line
Code:
Single_Dual_Band_Solution = 0
Change them into
Code:
Single_Dual_Band_Solution = 1
7.Save,Reboot
8.Enjoy
Modules For Stock Kernels
Modules is Add-on for our X8
X8Gesture Pinch zoom/Fake DT Doixanh Sypanitcs Fake DT
Instruction & Download Here @ Xda
andrej456 Pinch zoom/Fake DT Good for zooming Sypanitcs Fake DT
this is andrej456 X8Gesture good for zooming but no game mode
Download Here @ Mediafire
Instruction Here @ Xda
AX8MT Cypress Real DT by AnDyX
Instruction & Download Here @ Xda
X8UnderVolt UnderVolt CPU voltage
Instruction & Download Here @ Xda
X8Overclock Overclock X8 CPU
Instruction & Download Here @ Xda
Additional Modules: Tun/Tap, Cifs, NTFS, UTF8, EXT3, Ext4
You Can Find Here @ Xda
GingerXperia Blog
@ xperiafan13: please take a credit to developer that based your rom
URL:Here @ blogspot
Note: Use google translate to translate to your language
Kernel building for noob:
Instruction & Download Here @ Xda
Flash Player 10.3 ported For Armv6
Instruction & Download Here @ Xda
Some Word
Please Rate it if necessary Sticky this thread
Sense Progress
This is Sense Progress by me and Salo-S
Wifi = Working
By fixing
Code:
wifi.interface = tiwlan0
to
Code:
wifi.interface = wlan0
and replace some wifi libs
3G = Partially
Connect on E15i only not E15a
Camera = ?
Didn't tested it now
Salsa have 5mp camera so it's not easy to make it work
Vibra = Working
3D = Working With Error
Not Implemented:
ANT+
Good job, keep it up. Good for the Noobs.
You sure you don't want to reserve this space too?
There is no link to FXP Kernel... Show some respect to this dev please...
Sent from my E15i using Tapatalk
Nice guide .. keep it up!!!!!!! simple and Clean~~~
Sent from my GX8 using xda premium @kakho55 XDA
Man you did a good job,but forgot one of the greatest roms,and it is Xgin.that should be unforgetable.
Added Enjoy
Thank you
hi bro...i want to ask u something...i have do unlocked bootloader for my w8 using x8 method...after it finish my phone switch off and can't turn on...it is coma brick or loader brick?
one more think is it same between x8 and w8??and i can't do flashing because my phone can't turn on and usb can't detect....plzz help me friend...
Did you sim unlocked yor phone?if not then just reflash your w8 with sony ericsson update service qnd try unlocking it again.
i can't reflash it because my phone totally not function...no LED light appear...no power on...usb also not detected...
Its ok,dont panic.
You have pc companion right?try removing battery,plug in the phone and put the battery back in.it should set the phone in flash mode.then repair it via pc companion.if that doesnt work then its not a brick,your phone is broken.
U mean plug in usb in the phone 1st then put in battery again,right?
Yes
Sent from my X8 using xda premium
it still didn't work...my phone like dead phone..nothing happen...this is brick or hardware problem??
i have done unlocked bootloader successfully and after that this kind of problem happen...
It's doesn't turn on?
Sent from my E15 using Tapatalk
yes bro...
Related
[Question] Should I update or not?
2 days ago I updated to 2.0.2.a.0.24 and yesterday I rooted phone added dual touch restored data and usual stuff that are done after updating. Today, PC Companion said that there is new update available, does anyone know what update it is and can I add dualtouch again if I update?
No, don't update.. It'll update the same firmaware again I've tried
Ok thanks for tip
2.1.A.0.435 update There is a thread in development on this subject, which I've been looking into by having the 2.1.A.0.435 update on my phone and found the Baseband version is the big difference. New Mediascape & Timescape apps only offer the ability to zoom via a little icon, not by pinch even though Multitouch is enabled in the Kernel by default. Ignore this update as the performance is terrible without JIT v2 installed, rooted or xRecovery - default Linpack result of 6.22 ... after removing some apps, xRecovery and JIT v2 installed, processes killed, got it back to more fair 33.214 as my highest result with some work. The stock Global 2.0.2.A.0.24 is faster, more stable and kxhawkins & sempeternals are way faster. X.Gbread Theme - with 2.0.2.A.0.24 - gives you 2.1update1 and is quite responsive. Add JIT v2 to the 24 ROM / Multitouch mod by Bin4ry and you have a half decent X10, along the lines of what they should have sold off the shelf. The procedure for a decent 2.1 ROM that I'd advise is along these lines. kX10 R1B010 - High Performance SE Replacement ROM by kxhawkins Use SuperOneClickv1.5.5-ShortFuse.zip to obtain root Install xRecovery with HD fixes by zdzihu Enable Multitouch as described by My_Immortal & Bin4ry Set - /system/build.prop - dalvik-vm-heapsize=32mb - with Root Explorer JIT Enabler V2 - Optimized for xRecovery by zdzihu Install the SpareParts.apk from the CyanogenMod ROM All your software and functionality will work and be optimized, only thing in addition is Astro file manager for it's process manager or Advanced Task Killer free to zap processes spawning like demons on your battery life. Taken a miss of Froyo 2.2.1 and wish everything worked and runs. The FreeX10 looks great but I use my camcorder often.. TripNRaVeR 2.3.1 Gingerbread is my candidate for the next big upgrade. It's being put together quick - 48hours of release went to v1.3 and has the same issues with 2.2.1 Froyo / FreeX10 - but is Gingerbread and looks like the best ROM feature wise. Rowboat is a possible solution to the Camcorder driver problem with Froyo & Gingerbread but it isn't finished. Z, Bin4ry and other people are working on this though, I expect soon enough it will work with our X10 devices and man.. until then stay away from the new baseband volatile 435. My biggest gripe is the anpnymous usage information being sent back to SE, even if you instruct and set it off... privacy concerns are as bad as performance issues and 2.1.A.0.435 update has them both, with little else to offer!
2012/08/22【ROM Release】【U8800 Pro】B876_KALO_Extreme (Porting Huawei Honor)
2012/08/22【ROM Release】【U8800 Pro】B876_KALO_Extreme (Porting Huawei Honor) Hello Dear Community! Today I decided to share my work, a customized rom based on the latest Gingerbread official ROM of the Huawei Honor U8860. This porting wants to be the most light possible, avoiding the Huawei traces and trying to make difference with stability, speed and zero bugs. This is a list of the rom features: - Based on Gingerbread 2.3.6 – Official B876 (Firmware Huawei Honor U8860); - Root permanent permission; - Overclock kernel; - Unlocked FPS limit (30 @ 55); - Zipaligned apks; - Added BusyBox; - Removed Gallery 3D and replaced with QuickPic; - Removed Huawei Launcher and replaced with Zeam Launcher; - Corrected APNs list (only the Italian Internet Wind apn); - Edited carrier name "Wind Telecomunicazioni Spa" into "WIND"; - Edited carrier name "Telecom Italia SpA" into "TIM"; - Edited carrier name "Hutchinson H3G Italia" into "3 ITA"; - Removed the stock Browser and replaced with Dolphin Browser HD; - Updated Market (now Google Play), Google Search Box, FlashPlayer; - Removed Social Huawei and other apks from the stock rom; - Increased performance by editing build.prop; - Enabled HDR function on camera; - Removed File Browser and replaced with Root Explorer; - Independence of the /cust partition; - Removed WPS function on WiFi section; - Removed ipcall function; - Added the battery percentage on the status bar; - Stock Android Gingerbread lockscreen; - Removed the energy saving function; - Bypass of the Android Settings Wizard; - Optimized the GPS config for Europe; - Tethering WiFi is available and works fine; - Added by default the Quick Settings Widget in the notification bar; - FM Radio works fine; - Added function Volume Rocker Screen Wake Up; - A new graphic for Contacts and Phone applications; - Removed Fast Boot option; - Patched the libsqlite.so for better performances; - Disabled bugreports generation in kernel ramdisk; - Permanent Root Access; - No more is needed SuperUser.apk for root-based applications; - The default video codec for High Video Recording Quality is H264; - The default audio codec for High Video Recording Quality id AAC; - Edited the carrier name "Sonaecom - Serviços de Comunicações, S.A." into "Optimus"; PREREQUISITES - ATTENTION PLEASE a) ROM Gingerbread 2.3.5 Stock Huawei version (B512, B521, B540, B552, B565, B572) or any customized Gingerbread ROM (CyanogenMod, MIUI, 2.3.5, 2.3.6, 2.3.7) or any ICS Rom (DZO Aurora, Genokolar MIUI v4); b) Recovery CWM Recovery 5.0.2.7 If you have the stock recovery, you will not be able to install any customized ROM. So, you have to do these steps: download the CWM Recovery 5.0.2.7 (previous link to download the file), power off your device and turn on into Pink Screen Mode (holding down VOL+, VOL- and Power button). Plug in your usb cable to your pc and wait for the automount of the new drive. Navigate to the /image folder and rename the stock "recovery.img" into "recovery.bak". Now simply copy the CWM Recovery into the /image folder and be sure that its name is "recovery.img", otherwise you have to rename it into "recovery.img". Unmount the periferic, remove the usb cable and extract the battery to shutdown the phone. That's all. You can verify the new recovery installation entering in recovery mode (holding down VOL+ and Power button). INSTALLATION PROCEDURE FOR FULL PACKAGE 0) Make sure that you have installed all prerequisites; 1) Download the zip file of the rom with your pc; 2) Shutdown your smartphone and to be really sure unplug the battery; 3) Insert your battery and power on your smartphone into recovery mode holding down VOL+ and the power button (be sure that you have the CWM 5.0.2.7); 4) Go to advanced ---> reboot recovery; 5) At the new recovery boot go to "mount and storage"; 6) Mount usb storage; 7) Plug in your usb-microusb cable; 8) Copy the downloaded zip file into the external sdcard; 9) Wipe data/factory; 10) Wipe cache; 11) Wipe Dalvik Cache; 12) [OPTIONAL if you experience a huge battery drain only] Wipe Battery Stats; 13) Go to "mount and storage", then "format /system"; 14) Install zip from sdcard; 15) choose zip from sdcard and select the downloaded zip file; 16) Install complete! 17) reboot system now. Please wait about 2 minutes for the install process and be patient for the first boot. At the first boot the default language has been set to English. This choise because the rom needs to be more international possible. Anyway the rom is multilanguage and offers the default available languages of the stock Android base-rom. The default keyboard is the stock Android Latin. DOWNLOAD Date: 2012/08/22 File name: B876_KALO_Extreme.zip Changelog: Increased the 3G speed, fixed the network dropping from 2G/3G, updated applications. If you appreciate my work and want to thank me, please send a donation, it's a huge reason to keep alive this Android project for U8800 Pro. DONATE (PayPal) FaceBook Group Page -----> KALO ANDROID U8800 Pro Special thanks: - Genokolar (kernel and recovery Guru); - mik_os (libsqlite.so tweaks); - pikachukaki (theme creator and tester for his B876 based-ROM); - zontovolo (the best beta-tester I've seen!); - cuvetto (for the better audio experience); - merafly (for his advices and suggestions); - tasosmrs (for the modded phone.apk) - All users who are using/testing my releases; SPECIAL THANKS TO DONATORS: - Nektarios Orfanidis; - Pavel Igorevich; - Denis Avetsuk; - Eugenio Livio; - José Alexis Morera Fernández; Happy flashing! kalo86
At least a dev...good work m8...keep up this good work!!Can i suggest talking roms from anzhi and modify them like you wish to make them better??Keep up don't stop!
pikachukaki said: At least a dev...good work m8...keep up this good work!!Can i suggest talking roms from anzhi and modify them like you wish to make them better??Keep up don't stop! Click to expand... Click to collapse Thank you! I hope you try my rom, I repute it very very fast and stable. I have tested B512, B540, B552, B565, B572, B866 (Honor porting), B872 (Honor porting), B876 (Honor porting). I have always customed these official roms and I have to admitt that the latest B876 is the most powerfull, very stable and I am not finding bug at the moment. I prefer to take the stock rom from the official Huawei zip and customize the content making a good working rom. You are right, the anzhi forum is very rich of content, a lot of people upload roms daily. Regards
kalo congratsulations,,, first of all thank you, for trying to help me with cygwin kitchen the other days ,for cooking my rom but unfortunatelly my pc betrayed me... i think that THIS IS the most serious work,,i've ever seen for our phones.... i hope with this work ,you make me leave my moddified 2.2.2 stock rom... and a question,,by saying [Stock 2.6.35.7 kernel with default CPU frequencies...... you mean no o/c ??] CONGRATS AGAIN today you make me really happy
Hi gkalenis! It's a pleasure for me to read your words and I really like to help people with my works. This rom makes you smartphone like a new one, but a better one! Try it and enjoy yourself! Thank you very much for your thanksgiving Regards, kalo86
i'll wait a little more (not to long ) and i hope to continue with developing ,,and not loose you great ,great ,great for sure ,you make my day
awesome ROM mate. Gonna try this. Thanks a lot Sent from my U8800Pro using XDA
ics great man. Can you please port the ICS from Honor? (stock like, only basic tweaks as hdr, overclocking, fps, root, init.d) Because the dzo's is not too stable. thx mate
Any Review About This ROM? ---------- Post added at 12:24 PM ---------- Previous post was at 11:36 AM ---------- It Have Swype Keyboard?
What languages? Anyway, great job!
husen4u said: Any Review About This ROM? ---------- Post added at 12:24 PM ---------- Previous post was at 11:36 AM ---------- It Have Swype Keyboard? Click to expand... Click to collapse It has the stock Android latin keyboard. Filatov.p said: What languages? Click to expand... Click to collapse The rom is multi language, it has the default Android languages.
linomaniac said: great man. Can you please port the ICS from Honor? (stock like, only basic tweaks as hdr, overclocking, fps, root, init.d) Because the dzo's is not too stable. thx mate Click to expand... Click to collapse Hi, at the moment ICS is not my "goal" because it is buggy (also for Huawei Honor). When time becomes mature I will port a good base from U8860. In the meanwhile I hope to find better kernel sources, maybe specific for ICS, like 3.0.X kernels. This is a full-working Gingerbread and it apperas bugless, it's ready for daily use. Regards, kalo86
kalo86 said: In the meanwhile I hope to find better kernel sources, maybe specific for ICS, like 3.0.X kernels. Click to expand... Click to collapse I like the way you're thinking. This is the right way to make a real ics rom.
fantastic! finally an italian dev! I've just installed rom and I already love it! I'll post my impressions about long use...
vispo60 said: fantastic! finally an italian dev! I've just installed rom and I already love it! I'll post my impressions about long use... Click to expand... Click to collapse Good then! I am not finding problems after 3 days no-stop ;-) No missed calls; No missed SMS; WiFi, Bluetooth, GPS are working properly; Always fluid and very fast. B876 is a good base-rom!
kalo86 said: ........... This is a full-working Gingerbread and it apperas bugless, it's ready for daily use. Regards, kalo86 Click to expand... Click to collapse hi, and what is with the "vanishing media files" bug? Is corrected on your rom?
linomaniac said: hi, and what is with the "vanishing media files" bug? Is corrected on your rom? Click to expand... Click to collapse Hi, what is this "vanishing media files" bug?
kalo86 said: Hi, what is this "vanishing media files" bug? Click to expand... Click to collapse for example: http://epiccm.blogspot.com/2012/03/details-on-disappearing-sd-media-issue.html it seems to be a brand-independent bug of android os. I lost many many photos and videos.
I never had this bug, I'm sorry to hear your experience... But I never had a similar problem. Regards
Yes I Also Have This Automatically Photos And Videos Deleting Problem. I Am Using B512ROM Gonna Install Your ROM Tonight.
L ui for canvas 2 colours a120 wiko base
New L UI ROM BY ME 1) Stock UI Modded Like Android Lollipop 2) Android L Keyboard 3) Pure Lollipop experience.. 4) Ads Blocked 5) More Free Ram 6) More Battery Efficient 7) Stable and Smooth 8) Good Camera Qualiy 9) Battery & Other Performance Tweaks 10) all Bloat Wares Removed 11) Play Store working 12)Apollo themed by me 13)Apex for real lollipop like experience 14)latest wiko cam based on v10. Thanx to vibhor. REST FIND OUT YOURSELF ***and much more*** ---Installation instructions--- YOU MUST BE ON WIKO KK First take a full ctr backup wipe all - ( data,cache,system,dalvik) Install zip from sd card Reboot ---Your warranty is now void--- I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you . ---Credits--- (LINK OF ORIGINAL THREAD-http://forum.xda-developers.com/android/development/android-l-themed-kitkat-rom-gionee-m2-t2972773) SLIM HOUSE (FOR THIS BEAUTIFUL ROM) Me(@sid hatfield) For porting it Arun(@arun.negi004) and Vibhor(@vibhu0009) (FOR HELPING ME IN PORTING AND BUG FIXING) -----DOWNLOAD LINKS----- https://docs.google.com/file/d/0BzDwruZqN_vXNTBBNzdRd29RZEU/edit?pli=1 SCREENSHOTS____ https://drive.google.com/folderview...p3cmRGUV9BSkxVdnYtd1dyRktHREM5WU0&usp=sharing FIXES For Font choser push this apk into system>app https://docs.google.com/file/d/0BzDwruZqN_vXeXdYX2FuZFNKQkE/edit?pli=1 PLZ HIT THANKS IT WILL ENCOURAGE ME
NICE ROM Waiting for the link
arun.negi004 said: Waiting for the link Click to expand... Click to collapse Uploading Now Bud...
Is there any bug ...?
Good work sid.. Keep it up.. ??
jgmmjg said: Is there any bug ...? Click to expand... Click to collapse No bugs yet. Well if u find any report. ?
vibhu0009 said: Good work sid.. Keep it up.. Click to expand... Click to collapse Thanx to u bro. For all your help.
sid hatfield said: Thanx to u bro. For all your help. Click to expand... Click to collapse No problem beother.. ?
PERFORMANCE AND BATTERY LIKE NEVER BEFORE CAN BE FLASHED ON ANY ROM AND ANY PHONE IT IS A STABLE RELEASE STILL FLASH IT AT YOUR OWN RISK Features : Less RAM usage through zipalign Graphics Enhancement Overall Better Performance Less lags through LMK Tweak and Various VM Tweaks Faster SDCARD Read/Write Speed CWM / TWRP Flashable Increase touchscreen sensitivity System cleaner script for regular cleaning of system better battery performance Ad blocking Entropy (optional) GPS optimization script BUILD.prop tweaks (optional) Kernal tweaks Sqlite optimization Requirements : - Android 2.3.x (Gingerbread) and higher - Kernel with init.d support - Root access - ClockworkMod (CM)/ TWRP - At least 5 MB (currently 4 MB is enough) of free space in "/system" - Usable Brain and Flash able zip Installing Experience (Doesn't really matters if followed correct steps)[/SIZE] LINK https://docs.google.com/file/d/0BzDwruZqN_vXSU5Sa0hFZV83REE/edit?usp=docslist_api ALL CREDITS TO TDT TEAM original thread http://forum.xda-developers.com/showthread.php?t=2630242 HIT THANKS IT WILL ENCOURAGE ME
Can it work on gionee m3
no brother. u can try porting it. give proper credits and link to this thread and credits to orginal devs too..
Hit thanx if u liked my work
Hit thanx if u liked my work
Bluetooth problems with my Moto360 Hello there, I have big problems with connecting my Moto360 via Bluetooth. My phone will not find my SmartWatch. I've made in both places the Factory reset, but the rainbow will not Moto360. With my car kit and the MI-band I have no problems. What now?
[NEW[FAST][Mod][v5]Ultimate Performance-Blazing Fast Speed On The Go!
[Mod][v5]Ultimate Performance-Blazing Fast Speed On The Go! FOR Galaxy Ace S5830 -More heavy performance scripts added! -Made from the scratch! -Much Improved! -More aggressive than ever! -Not only init.d performance scripts now it will modify system files and build.prop -More powerful -More stable! Introduction [v5]Ultimate Performance is a Mod that combines many scripts and tweaks in one package which is aimed to improve Android system's performance,smoothness,reduce GUI lags and of course some useful battery life improvements and tweaks! Top 7 Performance Engines Installed! 1.Pure Peformance X(Zeno Edition) By Jeeko 2.Fly-On Mod By Slaid480 3.Project Dark Booster By Vipul Jha 4.Broadcom Booster By jynprojects 5.Adrenaline Engine By ImbaWind 6.LagFree V3 By Slaid480 7.TweakZV6 By bluestricker_21 What's New? -New Aroma Installer -New Optimized init.d scripts(Total 45 Init.d performance scripts installed) -Build.prop tweaks -New optimized performance engines(Total 7 Performance engines installed) -Fixed some bugs and glitches Thanks to @mohammad.afaneh for making the aroma installer and Thanks to @raisul2010.5396 for pointing out my mistakes! Key Features: 1.Improved Battery 2.Improved Graphics, Screen, Images 3.Improved CPU, Governors, I/O Schedulers Features: - Full memory management/Better multitasking. - Linux kernel tweaks and improvements for better performance and battery life. - Less lags for gamers. - Entropy generator engine used to reduce lags. - Zipalign apps in "/system" and apps in "/data" every 24 hours which result in less RAM usage. - Sqlite optimizations and faster database access. - CPU governors tweaks and improvements for better performance and battery life. - Better thermal management and less overheating. - Increased SD Card read-ahead cache to 2048 KB for faster SD card read and write - Drastically decreased the drainage of battery - Enables a non-aggressive dithering to save CPU - Slightly improves the scaling of the frequencies (for better results you need a good kernel) - Lightens the load on the CPU switching the workload to GPU rendering -GPU Tweaks added for better gaming experience -Zipalign at each Boot for better performance -Media Server Killer -CPU Boost Scripts - Lag reduction - I/O Tweaks -VM Tweaks And Much More! No need to install any optional files or running terminal emulator codes! This mod will start working automatically right after you install it! Important Note:-In the new v5 i have added some heavy scripts so the first boot will take sometime! After a successful boot again reboot your device! you will feel the speed! Requirements: 1.A kernel with init.d support! If your kernel doesn't feature init.d,you can emulate init.d by kernel adiutor/universal init.d 2.A custom recovery(clockworkmod or TWRP) Caution--->Do a nandroid backup! Before doing anything if something goes wrong you can restore your rom using that backup! This mod is stable and safe.There are extremely extremely less chances that the mod will brick your phone! But you must take precautions ! ultimate_performance_v5_cm.zip FILE ATTACHED BELOW! How to install- 1.Reboot into clockworkmod/TWRP recovery! 2.Go to Mounts and Storage 3.Mount system and data.(If already mounted,unmount then again mount) 5.Go to install zip from sd then flash ultimate_performance_v5_cm.zip 6.Repeat step 3 that i mentioned above 7.Reboot Warning:For CyanogenMod and CyanogenMod based roms only! Developers please feel free to use my mod! Please give me proper credits if you use my mod in any of your development work!
Nice to see that there is still some development going on for the ACE. I just came back to this device because my new phone has not yet arrived. Will try your mod and see what it changes
4Style said: Nice to see that there is still some development going on for the ACE. I just came back to this device because my new phone has not yet arrived. Will try your mod and see what it changes Click to expand... Click to collapse Yup bro V4 coming soon with tons of features Stay with ace and to this thread Hit The Button Thanks If I Helped You! Sent From A Galaxy Ace-i Far Far Away! Currently Running Rom:CMX11 V8(CyanogenMod 11) With Jenkins Kernel
Reserved
edited misleading thread starting
V5 released
All for your mobile
Hey This Thread For New Users Who Is Search For Custom Rom & How To Flash The Rom & Unlock Process & Recovery Flashing etc..... After all rom i had try there is result for you. The best stable , Battery friendly , Bugs free , Lag free etc.... So After 2 Months experience of all rom The best suitable & Friendly rom is. __________________________________________________ *)All In One Tool is the best tool for any things like Unbrick the rom , Flash the TWRP recovery , Lock the bootloader and Encryption Memory etc what not.... Link = https://androidfilehost.com/?a=show&w=files&flid=38683 Just Install Ths Software in Pc . On the Usb Debugging from the Devoloper Options. __________________________________________________ Oreo Rom __________________________________________________ 1)Bootleggers ROM UPDATE 28/04/18 Download: https://www.androidfilehost.com/?fid=673956719939837403 Changelogs: -Removed P-anims as some ppl reported some weird artefacts and lags sometimes Rom side stuff: https://drive.google.com/file/d/1_Vf...w?usp=drivesdk -Added some thermal tweaks -Kernel Upstreamed to .106 -Added ElementalX and other stuff 2)Jaguar Oreo 8.1 April 25. New release: 1. Choice of QS brightness slider (bottom/top) 2. Adjust brightness by sliding over statusbar 3. Timing options for back to kill app options 4. FP scanning disabled when screen is off (fp still recognized) 5. Omniclock autosnooze feature 6. Zenmode hotplug is replaced with MSM hotplug, which actually works 7. Thermal-engine.config is removed 8. Intelithermal enabled by default 9. Option to hide various lockscreen items 10. Webview to v66 11. Option to disable dt2w (requires updated KA) 12. CPU temperature added to CPU info on screen (Settings/J-features/More) 13. Added new Jaguar logo and features icons, credit to @The.Night.King Instructions: 1. Latest TWRP; wipe system/data/cache/dalvik; flash the rom; flash Gapps; 2. Reboot, then flash Magisk If upgrading, flash dirty + gapps. Magisk should kick in automatically. Download rom April 25 release: https://forum.xda-developers.com/dev...t/dl/?id=29239 Download the latest KA (with dt2w on/off option): https://forum.xda-developers.com/att...7&d=1524581025. Unzip and install as a normal app. __________________________________________________ Nought Rom __________________________________________________ 1)H2OS The best stable life time rom for zuk z2 / plus rom. All Stuffs and Problem Fix are written in the thread If any problems are there in the rom i am there for you. https://forum.xda-developers.com/lenovo-zuk-z2/development/rom-h2os-oss-cam-hal-support-t3748000 2)MIUI 9 The best Rom with Monthly update by @narshi shukla. All Your problem or anything which can help in future is written in thread. https://forum.xda-developers.com/le...ui-9-portrait-mode-iphone-x-gestures-t3755981 __________________________________________________ FOR EXTRA MODIFICATION AND TO INCREASE THE BATTERY LIFE USE AKT DOWNLOAD THREAD = https://androidfilehost.com/?fid=745425885120764404 Download Both APK = https://forum.xda-developers.com/showpost.php?p=70681254&postcount=2549 ORIGINAL THREAD https://forum.xda-developers.com/showpost.php?p=70352820&postcount=2146 __________________________________________________ DOLBY DIGITAL FOR BOTH ROM Oreo Rom THRAD = https://www.the***********.com/install-dolby-atmos-on-android-oreo/ __________________________________________________ For Those who have love with battery performance and Specially Gammimg like PUBG IN HIGH GRAPHICS . So you Play easily with wonderful experience. If any problems you have i will Help you. THIS THREAD WILL BE UPDATE EVERYDAY WHEN THE ROM IS GIVEN OFFICIAL UPDATE.