I am having a samsung note 4 sm-n910g running on 6.0.1 which was dead so i thought to flash it using odin with firmware version 4.4.4. When i was using odin i clicked on AP and selected file but after starting i got error that there is no pit partion.Due to this i seleted both AP and Bootloader after this i clicked start button and surprisingly flashing started.After getting pass message from odin i unpluged my phone but my phone got switched off so i flashed it again but this time flashing encountered error and odin gave message of FAIL.Now my device is dead,whenever i plug charger or connect it to pc phone shows download mode(which we get on pressing and holding power,volume down and home button)with error flashing firware encountered error.please tell me what to do
I am using windows7 32bit and i downloaded firware from sammobile.
Related
I have a i9505 that i decided to CF-AutoRoot using Odin, while flashing i got a "Complete(Write) operation failed".
Now I cant open it because I get a "Firmware upgrade encountered an issue.Please select recovery mode in Kies & try again".
Opened Kies couldnt recognise it. Any idead what to do next? I believe I was running on XXUBMF8 official stock rom
Firmware upgrade encountered an issue.Please select recovery mode in Kies & try again
http://i.imgur.com/0S1BJnx.jpg
and
Odin Error
http://imgur.com/9vN8JFX
Can you get into download mode? If you can, plug it in and try rooting again. I believe you are not supposed to run Kies when you are in the middle of rooting though...
Sent from my GT-I9505 using Tapatalk 4
I was trying to install an Official Stock Samsung Galaxy S4 GT-I9505 firmware, from SAMMOBILE Link for the firmware I tried to use: http://www.sammobile.com/firmwares/3/?download=26516. So while flashing it with ODIN, I think it just randomly disconnected, but that just bricked my phone. I don't know whether it is a soft brick or a hard brick, but this is what happens to my phone, every time I turn on my phone whether it's done normally, the download mode or recovery mode method I will be stuck on that screen.
So now I typed in the error on Google to see how it can be fixed. Link to the method to fix the error: http://androidcentral.us/2013/09/how-to-fix-firmware-upgrade-encountered-an-issue-on-kies/
Firstly, my computer (running Windows 7 ULTIMATE 64-BIT) can detect my phone, saying the drivers have been installed successfully. However KIES doesn't detect mine. Anyways I still try to do this method where I have to go to Tools -> Firmware Upgrade and Initialization on KIES. I type in my model name: GT-I9505, that works, now I have to do my S/N or Serial Number: RF1DXXXXXXX, so when I press OK it says GT-I9505 doesn't support 'Intialising', so I am stuck have no idea what to do.
Also, while flashing I tried repartition my S4, to remove all of the stuff I had, none important, except my music which I transferred to my PC. Solved, just flashed Official firmware, it now works.
Just separately repartitioned my S4, it works but S4 is now stuck on boot loop, so have to flash a 4.4.2 Official Firmware.
Harnessful said:
I was trying to install an Official Stock Samsung Galaxy S4 GT-I9505 firmware, from SAMMOBILE Link for the firmware I tried to use: http://www.sammobile.com/firmwares/3/?download=26516. So while flashing it with ODIN, I think it just randomly disconnected, but that just bricked my phone. I don't know whether it is a soft brick or a hard brick, but this is what happens to my phone, every time I turn on my phone whether it's done normally, the download mode or recovery mode method I will be stuck on that screen.
So now I typed in the error on Google to see how it can be fixed. Link to the method to fix the error: http://androidcentral.us/2013/09/how-to-fix-firmware-upgrade-encountered-an-issue-on-kies/
Firstly, my computer (running Windows 7 ULTIMATE 64-BIT) can detect my phone, saying the drivers have been installed successfully. However KIES doesn't detect mine. Anyways I still try to do this method where I have to go to Tools -> Firmware Upgrade and Initialization on KIES. I type in my model name: GT-I9505, that works, now I have to do my S/N or Serial Number: RF1DXXXXXXX, so when I press OK it says GT-I9505 doesn't support 'Intialising', so I am stuck have no idea what to do.
Also, while flashing I tried repartition my S4, to remove all of the stuff I had, none important, except my music which I transferred to my PC.
Just separately repartitioned my S4, it works but S4 is now stuck on boot loop, so have to flash a 4.4.2 Official Firmware.
Click to expand...
Click to collapse
Hi,
Can you get into recovery?
Can you still see your phone in odin?
If so , disable kies (task manager) and try to flash the firmware again.
Wipe data and cache before and after flashing firmware.
Rooted with ODIN. The phone worked fine for weeks and then I received this message trying to charge it one day. I get "FAIL! (auth), "FAIL! (Size)," or "FAIL! (Erase)" anytime I try to flash -- whatever I try to flash. I am using ODIN3 3.10.7.
Kies 3 does not recognized this device.
Smart Switch does not recognize this device.
ADB disabled
External Storage disabled.
Using a PIT file and T Flash, it starts to work, but ultimately fails.
Any ideas? What information should I provide?
Flashed a new image, but it won't load. Phone is stuck on the first screen.
Found one to flash through odin, but it won't load on reboot. Kies is attempting to reimage, but last try it also would no reboot. Fails to load image.
zerowrst said:
Rooted with ODIN. The phone worked fine for weeks and then I received this message trying to charge it one day. I get "FAIL! (auth), "FAIL! (Size)," or "FAIL! (Erase)" anytime I try to flash -- whatever I try to flash. I am using ODIN3 3.10.7.
Kies 3 does not recognized this device.
Smart Switch does not recognize this device.
ADB disabled
External Storage disabled.
Using a PIT file and T Flash, it starts to work, but ultimately fails.
Any ideas? What information should I provide?
Click to expand...
Click to collapse
Finally worked. Tried to flash tar from sammobile 10 times. Finally took.
hey there guys
this is my first thread
i am using ODIN to flash a stock FIRMARE
but i get the error at system.img stating failure after progressing for few minutes
i got odin 3.12 ,used drives ,have samswitch and kies installed
PS i used BL to flash the system and it worked but i used the AP get me the error,now even with the BL it gives the error
am not new to flashing but to samsung devices second time
Hi,
My S7 Edge boot got stuck at "Samsung Logo". Recovery Mode not working. Only Download Mode works.
While googling option to get my data back, got thread that to Flash the ROM with "HOME_CSC" file in ODIN.
I downloaded the following files;
1. Firmware G935FXXS8ETCA_G935FOJV8ETCA_XSG for SM-G935F UAE version model from Sammoblie.
2. USB driver from Samsung
3. Different versions of ODIN.
While flashing ROM in ODIN with HOME_CSC, process getting FAILED with the message as "There is no PIT Partition"
then I tried with CSC
While Flashing with CSC, flashing get failed with message, "Re-partition operation failed"
Options Tried: Different PCs, USB Cables, Ports and various versions of ODIN, but the result was same as above.
Tried with different UAE versions of G-935F & G-935FD firmwares(Last & prelast of both)
Phone Info
Model : SM G935F (As seen in Download Mode Screen. But SM-G935FD was written on back of my mobile.
Firmware Country Code : Really I dont know. Purchased the mobile from Qatar and was using in UAE & India without any issues.
Android version 8 : Oreo
Please help me to solve it without losing the data.
Reagrds,
Ojes
OJES said:
Hi,
My S7 Edge boot got stuck at "Samsung Logo". Recovery Mode not working. Only Download Mode works.
While googling option to get my data back, got thread that to Flash the ROM with "HOME_CSC" file in ODIN.
I downloaded the following files;
1. Firmware G935FXXS8ETCA_G935FOJV8ETCA_XSG for SM-G935F UAE version model from Sammoblie.
2. USB driver from Samsung
3. Different versions of ODIN.
While flashing ROM in ODIN with HOME_CSC, process getting FAILED with the message as "There is no PIT Partition"
then I tried with CSC
While Flashing with CSC, flashing get failed with message, "Re-partition operation failed"
Options Tried: Different PCs, USB Cables, Ports and various versions of ODIN, but the result was same as above.
Tried with different UAE versions of G-935F & G-935FD firmwares(Last & prelast of both)
Phone Info
Model : SM G935F (As seen in Download Mode Screen. But SM-G935FD was written on back of my mobile.
Firmware Country Code : Really I dont know. Purchased the mobile from Qatar and was using in UAE & India without any issues.
Android version 8 : Oreo
Please help me to solve it without losing the data.
Reagrds,
Ojes
Click to expand...
Click to collapse
Hi. Try flashing TWRP using ODIN. Once done then boot into TWRP by holding power button + home + volume up buttons. Once in TWRP recovery, connect your phone to a computer and it can transfer data between phone and computer. Take a backup of the data and then flash stock rom or anyother rom as you wish.
mpadhu said:
Hi. Try flashing TWRP using ODIN. Once done then boot into TWRP by holding power button + home + volume up buttons. Once in TWRP recovery, connect your phone to a computer and it can transfer data between phone and computer. Take a backup of the data and then flash stock rom or anyother rom as you wish.
Click to expand...
Click to collapse
Thanks Dear,
Is OEM lock has any role in flashing with TWRP? Because i cant access the "Settings" in the phone to lock/unlock OEM, since the phone doesn't boot.
[Recovery][Exynos] Official TWRP for Galaxy S7 edge (hero2lte)
Team Win Recovery Project 3.0.2-4 This is for the International SM-G935F/FD/X, Korean SM-G935K/L/S, and Canadian SM-G935W8 Exynos models only! Do not flash on flat S7 or Qualcomm models! WARNING #1: Flashing a custom recovery to your...
forum.xda-developers.com
mpadhu said:
Hi. Try flashing TWRP using ODIN. Once done then boot into TWRP by holding power button + home + volume up buttons. Once in TWRP recovery, connect your phone to a computer and it can transfer data between phone and computer. Take a backup of the data and then flash stock rom or anyother rom as you wish.
Click to expand...
Click to collapse
Hi
I tried to Flash TWRP (Dowloaded from Team Win Site) with ODIN 3 v3.14. But it fails with a message "There is no PIT partion".
OJES said:
Hi
I tried to Flash TWRP (Dowloaded from Team Win Site) with ODIN 3 v3.14. But it fails with a message "There is no PIT partion".
Click to expand...
Click to collapse
Try with a different usb cable and different usb port. Try using older versions of odin like v3.12 or v3.13
I'm
mpadhu said:
Try with a different usb cable and different usb port. Try using older versions of odin like v3.12 or v3.13
Click to expand...
Click to collapse
All options tried even with another PC.