Hi,
I've tried a few different roms and almost all of them I've had random reboots. Sometimes once a day and sometimes several times a day. I don't understand those logs but I've saved a few of them to my Dropbox after random reboots. One common thing is that every log has some lines at the end that says modem fatal error. Since I still got warranty left I would like to know are these signs of broken modem or if someone could say what is causing those random reboots.
I'm running almost stock roms always. Only rooted, no greenify or different kernels etc.
Also I haven't noticed any similarities when those random reboots happen. Might be when phone is unused on the table or when scrolling Facebook or using browser. Totally random in my opinion.
Here's the link for Dropbox folder. There's a few logs and I really appreciate it if someone has time to check those.
https://www.dropbox.com/sh/twh4u437qfva518/AADuK5u9UEmEal-VzkdIK0oMa?dl=0
Try a factory reset.
Thanks for the tip. Done that too few times though and the random reboots still continues.
dont know if this is related or not but I have had problems with selecting a different network manually on all roms apart from OOS. I suspect this is something to do with the modem.
demongokul said:
Try a factory reset.
Click to expand...
Click to collapse
dude read first.
He said he has tried various ROM's. He has obviously done factory resets more than once.
this customer care like approach is not acceptable here.
have you worked at a call centre? seems highly likely.
Sorry OP for going off- topic.
control freak said:
dude read first.
He said he has tried various ROM's. He has obviously done factory resets more than once.
this customer care like approach is not acceptable here.
have you worked at a call centre? seems highly likely.
Sorry OP for going off- topic.
Click to expand...
Click to collapse
Never worked in a call center. Overlooked the message from OP.
---------- Post added at 06:27 PM ---------- Previous post was at 06:26 PM ----------
NoobMonkey said:
Thanks for the tip. Done that too few times though and the random reboots still continues.
Click to expand...
Click to collapse
Strange.. Sorry I have no idea.
More logs added to op link. Latest from today and running cm14 1710 build with Pico open gapps.
All ideas are welcome.
I'm having similar reboot issues with CM14. I don't have any issues with CM13 so I just reverted back to that. I was hoping it would just get ironed out as the ROM developed, but I'll try and save a log after the next CM14 update to see if they have the same error (not that I would know what to do with that information).
I have the same problem.
http://forum.xda-developers.com/oneplus-2/help/random-reboots-overclocked-kernels-t3446631
I posted a method I did to try to solve it. It did work. But now its kinda messed up again.
My theory is that it has to do with the battery not pushing out enough amount of voltage for the processor. If you're not running on a overclocked kernel I would still try it.
Best of luck!
---------- Post added at 09:57 PM ---------- Previous post was at 09:52 PM ----------
Also, just for the sake of asking.
Did your phone at any point mess up that you had to use the Qualcomm flashing tool?
When did you buy your OP2?
Have you done any kinda hex-editing to the bootloader?
macymagiska said:
I have the same problem.
http://forum.xda-developers.com/oneplus-2/help/random-reboots-overclocked-kernels-t3446631
I posted a method I did to try to solve it. It did work. But now its kinda messed up again.
My theory is that it has to do with the battery not pushing out enough amount of voltage for the processor. If you're not running on a overclocked kernel I would still try it.
Best of luck!
---------- Post added at 09:57 PM ---------- Previous post was at 09:52 PM ----------
Also, just for the sake of asking.
Did your phone at any point mess up that you had to use the Qualcomm flashing tool?
When did you buy your OP2?
Have you done any kinda hex-editing to the bootloader?
Click to expand...
Click to collapse
I have stock kernel and haven't done any editing on bootloader. At least I am aware of. And no, I didn't have to use Qualcomm flashing tool.
If I remember correctly, I bought my phone just over a year ago. Have to try tomorrow that link u posted.
Well, if the logs are saying fatal_modem. Have you tried to flash the latest modem available from OOS 3.1.0?
Also you must realize that CM 14 is still under development, so it might be prone to bugs.
Would flashing a different modem fix random shut downs and crashes? My phone does the random rebooting thing except it doesn't reboot on its own, which others have seemed to experience too. I am also unable to manually select a network, as previously mentioned in this thread. Where could I find a new modem to flash? Here's an image of my about screen with my modem version.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
Today I installed AOSP status bar icon on my sgy via CWM. After successfully installing it and select reboot. my phone screen became black showing " Kernel panic upload mode"....What does it mean ? How to get out this ??
imElectronica said:
Today I installed AOSP status bar icon on my sgy via CWM. After successfully installing it and select reboot. my phone screen became black showing " Kernel panic upload mode"....What does it mean ? How to get out this ??
Click to expand...
Click to collapse
try getting in download mode and flash stock rom, or try to get in recovery mode and reflash rom
mjz2cool said:
try getting in download mode and flash stock rom, or try to get in recovery mode and reflash rom
Click to expand...
Click to collapse
i clear cache and wipe data then restore my CWM back up rom....but it is happening
imElectronica said:
i clear cache and wipe data then restore my CWM back up rom....but it is happening
Click to expand...
Click to collapse
try without restoring, just install stock rom or reflash the rom, but without restoring the backup
imElectronica said:
Today I installed AOSP status bar icon on my sgy via CWM. After successfully installing it and select reboot. my phone screen became black showing " Kernel panic upload mode"....What does it mean ? How to get out this ??
Click to expand...
Click to collapse
do remove the baterry and restart the phone ?
does it happening again?
if you doesnt when the screen comes long press the lock button untill phone is off the try to switch on
try it ?
i dont know the reason for it
Kernel panics occur when the system through a fatal error and find no more possibility will need to get the device/system alive and goes off.
its like the Bluescreen on Windows.
reasons can be: faulty memory accesses,defective hardware(not often),etc...
in the most its gone after reboot when not do a factory reset and flash new firmware.
-CALIBAN666- said:
Kernel panics occur when the system through a fatal error and find no more possibility will need to get the device/system alive and goes off.
its like the Bluescreen on Windows.
reasons can be: faulty memory accesses,defective hardware(not often),etc...
in the most its gone after reboot when not do a factory reset and flash new firmware.
Click to expand...
Click to collapse
so you mean it is the hard brick, right? and cannot the device be restored using usb jig as well?
its no hardbrick,when u have a hardbrick than your phone do nothing anymore!
Wow finally I witnessed a person who got the kernel panic mode!!
Take it to service centre and get replacement. They will take it as its a major software(?) issue
some days ago i haved a kernel panic too on my lg e610 by testing cm10.2 alpha build,after reboot it was done,but i was shocked.i have only opened the camera app for testing libs and boom.but phone worx well.
-CALIBAN666- said:
its no hardbrick,when u have a hardbrick than your phone do nothing anymore!
Click to expand...
Click to collapse
So the hard brick is what? Hardware failure?
Sent via Kamehaamehaa
---------- Post added at 03:18 AM ---------- Previous post was at 03:16 AM ----------
-CALIBAN666- said:
some days ago i haved a kernel panic too on my lg e610 by testing cm10.2 alpha build,after reboot it was done,but i was shocked.i have only opened the camera app for testing libs and boom.but phone worx well.
Click to expand...
Click to collapse
Then how did you get it working?
Sent via Kamehaamehaa
hardbrick you see when the does nothing,no boot,pc does not recognise no nothing,its dead.most in case that is when the hardware is broken,when your phone goes on and boot its not hardbricked,your screen goes on but is black you said,so the phone lives,hardbrick is the end.
and i have wiped all in rescuemodus and have flashed new firmware.but it was my lg e610.
-CALIBAN666- said:
hardbrick you see when the does nothing,no boot,pc does not recognise no nothing,its dead.most in case that is when the hardware is broken,when your phone goes on and boot its not hardbricked,your screen goes on but is black you said,so the phone lives,hardbrick is the end.
and i have wiped all in rescuemodus and have flashed new firmware.but it was my lg e610.
Click to expand...
Click to collapse
So what can be the possible causes of hardbrick?
Sent via Kamehaamehaa
dead bootloader,corrupted efs partition,hardware is dead like Phonemainboard have defekts,Battery overload,Overheating from device because use an overclocked Kernel,but not on SGY there is no real overclocking.It drops in water +++++
---------- Post added at 12:53 AM ---------- Previous post was at 12:42 AM ----------
for more infos you can try to ask Doky73 he is the only one i knows with a real hardbricked SGY(anyone correct me if im wrong),so far as i know he has flashed a not supporting bootloader or something,not 100% sure
-CALIBAN666- said:
dead bootloader,corrupted efs partition,hardware is dead like Phonemainboard have defekts,Battery overload,Overheating from device because use an overclocked Kernel,but not on SGY there is no real overclocking.It drops in water +++++
---------- Post added at 12:53 AM ---------- Previous post was at 12:42 AM ----------
for more infos you can try to ask Doky73 he is the only one i knows with a real hardbricked SGY(anyone correct me if im wrong),so far as i know he has flashed a not supporting bootloader or something,not 100% sure
Click to expand...
Click to collapse
Yeah thanks...
Sent via Kamehaamehaa
allways welcome brother.
-CALIBAN666- said:
dead bootloader,corrupted efs partition,hardware is dead like Phonemainboard have defekts,Battery overload,Overheating from device because use an overclocked Kernel,but not on SGY there is no real overclocking.It drops in water +++++
---------- Post added at 12:53 AM ---------- Previous post was at 12:42 AM ----------
for more infos you can try to ask Doky73 he is the only one i knows with a real hardbricked SGY(anyone correct me if im wrong),so far as i know he has flashed a not supporting bootloader or something,not 100% sure
Click to expand...
Click to collapse
I'm facing this after flashing AOSP status bar icon pack....I've also two error....Plz see here.... http://forum.xda-developers.com/showthread.php?t=2418805
Today an user had same issue like me on cm10.1,i had it with cm10.2.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
GREEEETZ!!!!
-CALIBAN666- said:
Today an user had same issue like me on cm10.1,i had it with cm10.2.
GREEEETZ!!!!
Click to expand...
Click to collapse
Any idea to fix it....for SGY.
Not realy sure bro,sorry.for me a flash in rescue modus have solved the issue.have you tryd to flash a new firmware with "bootloader" not pit?
GREEEETZ!!!!
---------- Post added at 05:27 AM ---------- Previous post was at 05:19 AM ----------
When needet you can download an bootloader and all that you need(i hope it helps)from my link.
http://forum.xda-developers.com/showthread.php?p=32556674
Maybe it will help
GREEEETZ!!!!
Hey guys! I recently bought a Galaxy S5 through an ad a week ago and everything was working perfectly!
I then decided to flash the XtreStoLite rom because I was excited about the features and after I had flashed
it everything booted up without any issues and the network showed i had full service. A few hours passes by
and I notice I havent recieved any text messages or calls and that's when I notice that it says I can only make emergency calls.
I reflashed stock samsung rom but I still had the same issues. I first thought it was blacklisted / barred but for every other day
I keep searching for the IMEI to pop up in any of the databases but still nothing... Every service tells me the phone is unlocked.
I have no idea what to do or try at this point since I live in Sweden and bought the phone in Denmark and I dont even know what carrier
it was under
Nobody with any tips on what I could do? Still to this day every IMEI check site I go to says the IMEI is clean and all these errors started happening after I flashed another rom..
What are my options at this point?
I'm still stuck in between every site telling me the phone is unblocked and being stuck with the phone saying "not connected to network".. What can I do at this point? I've been googling alot but did not find any answers at all.
Karismatic.Blasphemy said:
I'm still stuck in between every site telling me the phone is unblocked and being stuck with the phone saying "not connected to network".. What can I do at this point? I've been googling alot but did not find any answers at all.
Click to expand...
Click to collapse
I think I have the same problem. I bought the phone from private seller so I don't know what was the actual location of the phone.
http://forum.xda-developers.com/showthread.php?t=2753295)
Hi, did you find any solution?
can you share screenshot of the info you get when you dial *#0011# in dialer.
uktel3315 said:
Hi, did you find any solution?
can you share screenshot of the info you get when you dial *#0011# in dialer.
Click to expand...
Click to collapse
My phone says IMEI passes, and network is unblocked. I flashed Alliance rom and it worked last night. This morning it kicked me off all data. No phone number and no network access. I go to dial and I get the roaming warning for US Cellular. I posted my own thread and found this one as well. I also sent a PM to Alliance rom dev and posted in that thread. I need some serious help.
Edit: I also have no PRL version, no "MIN", no phone number, and "mobile network state" says disconnected.
uktel3315 said:
Hi, did you find any solution?
can you share screenshot of the info you get when you dial *#0011# in dialer.
Click to expand...
Click to collapse
Sure no prob. Here is a print:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Karismatic.Blasphemy said:
I'm still stuck in between every site telling me the phone is unblocked and being stuck with the phone saying "not connected to network".. What can I do at this point? I've been googling alot but did not find any answers at all.
Click to expand...
Click to collapse
Are the APN´s listed unter "mobile networks/access points" ?
cokenet said:
Are the APN´s listed unter "mobile networks/access points" ?
Click to expand...
Click to collapse
I have no idea.. how do I check that?
Edit:
Just checked it, jupp I have the APN and i ticked it but no change. Cant register to network.
Karismatic.Blasphemy said:
I have no idea.. how do I check that?
Click to expand...
Click to collapse
Go to Settings/More neworks/Mobile networks/Access Point Names!
If there are no entries, something is wrong. You need the APS´s for connecting the the network.
You cant find the correct APN´s of your Provider with google or in the FAQ of your Provider.
If you have them, you can enter the APN´s manually by klicking the "+" and type the address for web and then for mms. Its needed.
---------- Post added at 04:55 PM ---------- Previous post was at 04:54 PM ----------
Karismatic.Blasphemy said:
I have no idea.. how do I check that?
Edit:
Just checked it, jupp I have the APN and i ticked it but no change. Cant register to network.
Click to expand...
Click to collapse
Hm ok. ****
---------- Post added at 04:58 PM ---------- Previous post was at 04:55 PM ----------
Try to flash maybe a different Rom, or try the stock one again, just 4 testing, if it´s working again.
Try flashing a stock firmware via Odin. Get one from Sam Mobile. Had a friend that something similar happened to him and in the end it turned out the phone was blacklisted, even showing a clean IMEI in multiple sites. Also, if you have lying around a backup of your EFS, try restoring that and see if it fixes your problem (fixed mine once).
omegajester said:
Try flashing a stock firmware via Odin. Get one from Sam Mobile. Had a friend that something similar happened to him and in the end it turned out the phone was blacklisted, even showing a clean IMEI in multiple sites. Also, if you have lying around a backup of your EFS, try restoring that and see if it fixes your problem (fixed mine once).
Click to expand...
Click to collapse
I've tried Echo rom, Xtrolite, stock & phoenix.
Currently im on latest stock rom updated with Kies. Only thing i've modified is root & install recovery but other than that it's all stock.
At this point I'm thinking about getting a asansam box and try fixing the phone myself.
I did ask you to help me for my modem problem ...
Thanks all of you help me .. but I didn't work ...
I just payed 50$ .. in order to solve it ..
Now, my Camera doesn't work ..
I tried all the fixes which I found it here ...
Please, help ..
I don't want to pay one more time ...
First, why did you pay and what did you pay for?
Second, we need your ROM.
Third, what did you do to get this?
The guys who roped him off (ones he paid) probably flashed him a wrong firmware without camera fix.
We need your phone serial number & ROM serial to identify what it is.
Jhnsn said:
First, why did you pay and what did you pay for?
Second, we need your ROM.
Third, what did you do to get this?
Click to expand...
Click to collapse
I don't know why doesn't it work ?
this my rom
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
mrbahaa9 said:
I don't know why doesn't it work ?
this my rom
Click to expand...
Click to collapse
LOL!
Because you are on not public M. M. Alpha.
The M comes with new camera api that is not exactly compatible with old camera driver's.
Advice is to revert back to Lollipop.
Zola III said:
LOL!
Because you are on not public M. M. Alpha.
The M comes with new camera api that is not exactly compatible with old camera driver's.
Advice is to revert back to Lollipop.
Click to expand...
Click to collapse
So how can I solve this problem ?!
It made me crazy ...
Do the camera or cameras work on any rom???
They certainly won't work as they should on M.
Zola III said:
Do the camera or cameras work on any rom???
They certainly won't work as they should on M.
Click to expand...
Click to collapse
it didn't work on any rom ... never ...
@Zola III ...
there is something strange ...
that the front camera is active but the basic one in not ...
Did it work on stock firmware?
Did you or someone else disassembled the phone before?
Zola III said:
Did it work on stock firmware?
Did you or someone else disassembled the phone before?
Click to expand...
Click to collapse
No it didn't work on stock firmware ...
and no there is no one disassembled the phone before ...
There are two tips of the main camera sensors.
Before of that you tried with CM 12.1 with & without camera fix? As the fix addresses just that - other sensor.
If it didn't work anyhow with CM12.1 then problem is elsewhere.
When & exactly how did you're rare cam stopped working?
Zola III said:
There are two tips of the main camera sensors.
Before of that you tried with CM 12.1 with & without camera fix? As the fix addresses just that - other sensor.
If it didn't work anyhow with CM12.1 then problem is elsewhere.
When & exactly how did you're rare cam stopped working?
Click to expand...
Click to collapse
I tried all these things but It didn't work ?
My camera stopped work when efs files of my phone changed ....
Go to Sam mobile, search for the latest firmware, firmwares for your region, download & flash them. You will also find the instructions there how to flash. For this you will also need to revert back to default recovery I hope you made a Flasfify backup of it. Also I hope you staid on EXT4 file system.
The only way to flash back proper full stock with all blobs & everything.
---------- Post added at 05:39 PM ---------- Previous post was at 05:37 PM ----------
If you don't know how to do it find someone who does it for a living & pay 5~10€ for it.
Zola III said:
Go to Sam mobile, search for the latest firmware, firmwares for your region, download & flash them. You will also find the instructions there how to flash. For this you will also need to revert back to default recovery I hope you made a Flasfify backup of it. Also I hope you staid on EXT4 file system.
The only way to flash back proper full stock with all blobs & everything.
---------- Post added at 05:39 PM ---------- Previous post was at 05:37 PM ----------
If you don't know how to do it find someone who does it for a living & pay 5~10€ for it.
Click to expand...
Click to collapse
I did that, but it didn't change anything ... unfortunately
Hi There..
I bought a used Galaxy S4 from a local market, I checked it on the shop it was working fine. But as soon as reached home It started rebooting. I went back to him and bargained but in vain.
So I don't know why is this issue, I tried Hard Reset, changing the battery, changing the firmware (now it is on the latest one), searching on the other forums and applied their solution, tried each & every suggestion available on the internet but the same issue :'( :crying:
It reboots only in stand-by mode, not when in use & LCD is on.
Any suggestion would highly be appreciated
P.S Before posting I doubled checked every thread on this site.
What rom you are on
Right Now I'm on Android Version 5.0.1
and build no is: LRX22C.i9506XXUDPG2
are you using sd card? try the phone without it
frgo said:
are you using sd card? try the phone without it
Click to expand...
Click to collapse
No, I'm not using
is there any way to know if it's any hardware fault ? (like CPU)
Ahhsan said:
Right Now I'm on Android Version 5.0.1
and build no is: LRX22C.i9506XXUDPG2
Click to expand...
Click to collapse
Did you flash it in or it has been already in there?
Did you confirm that the model # is gt-i9506 in download mode?
audit13 said:
Did you confirm that the model # is gt-i9506 in download mode?
Click to expand...
Click to collapse
yes double checked
If it is randomly rebooting on a stock ROM, it could be a battery or motherboard issue. You have another battery to try?
audit13 said:
If it is randomly rebooting on a stock ROM, it could be a battery or motherboard issue. You have another battery to try?
Click to expand...
Click to collapse
yes I tried not only on one, but 3 battries but the issue is same..
How can I confirm if it is a hardware issue ?
There is really no way to confirm that it is a hardware problem unless you can swap out the motherboard for a know working motherboard without changing any other parts.
Can you flash a new rom?
a602820922 said:
Can you flash a new rom?
Click to expand...
Click to collapse
yes, which rom should I flash ?
If the phone is rebooting on a completely stock ROM, I don't think any ROM, stock or custom, is going to help.
flash with odin stock firmware mate.
audit13 said:
If the phone is rebooting on a completely stock ROM, I don't think any ROM, stock or custom, is going to help.
Click to expand...
Click to collapse
It's worth to try.
Ahhsan said:
yes, which rom should I flash ?
Click to expand...
Click to collapse
What's your phone details?
Can you post a print screen for us?
Like this ones?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The most stable ROM for the s4 is a stock ROM which the OP has already tried. The OP has also tried different batteries.
Yes, it may be worth a try but flashing a custom ROM will trip knox and, if the vendor decides to take the phone back, tripping knox will inform the vendor that the phone has been flashed with non-official Samsung firmware.
Well if he could to take the phone back he probably would do that already, but it looks like he can't or he doesn't want to.
Probably there is no warranty on it anyway.
My advice according to what "audit13" said... take it back ASAP if you can of course.
---------- Post added at 07:21 PM ---------- Previous post was at 07:16 PM ----------
Ahhsan said:
yes, which rom should I flash ?
Click to expand...
Click to collapse
You have to choose what you want :
1.kit kat rom
2.Lollipop rom
3.marchmallow
Then let us know so we can assist you with flashing
---------- Post added at 07:32 PM ---------- Previous post was at 07:21 PM ----------
asadnow2k said:
flash with odin stock firmware mate.
Click to expand...
Click to collapse
That's a good advice as well, if you fancy with a stock rom.
here its a link to find repair firmware
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
including pit files in it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N910P using Tapatalk
Please let us know if it has anything in it worth mentioning. Thanks
So, does "remaining updates: 0" mean they are done supporting the phone?
poit said:
So, does "remaining updates: 0" mean they are done supporting the phone?
Click to expand...
Click to collapse
Seems like it bruh
tiger5969 said:
Seems like it bruh
Click to expand...
Click to collapse
I've been dodging installing the PJ1 update for a while. I went and checked, and it has the same line: "remaining updates: 0" I don't think we can assume that Samsung is going to stop updating our Note 4s. Whether they'll give us Nougat, well, that's another question. But I'll bet they keep giving us the security updates a while longer.
remaining updates have absolutely nothing to do with whether or not the device is still being supported. it is an indication of how many updates remain before you're "up to date." for example, if you were to flash PH4, then update, you'd have that number go from 0 to however many updates will get you to PL1
aaron74 said:
Please let us know if it has anything in it worth mentioning. Thanks
Click to expand...
Click to collapse
No noticeable changes, maybe somethings related to performance only.
Sent from my SM-N910P using Tapatalk
aaron74 said:
Please let us know if it has anything in it worth mentioning. Thanks
Click to expand...
Click to collapse
@aaron74 is it possible to get Grace UX on stock or deodex MM for N910P?
natibongo said:
@aaron74 is it possible to get Grace UX on stock or deodex MM for N910P?
Click to expand...
Click to collapse
Short answer: No
I guess anything is possible, but because Grace is not a specific thing. It's the whole look and feel of the rom. So you'd have to rewrite and edit every aspect of the rom, because I assume samsung builds their rom around grace.
So this would be too much work for anyone.
So really only viable way to get Grace, is you just port a Grace rom. Hence the Note 7 ports.
Hope that answers you question. Best way i can explain it and understand it myself.
This will be the last update we will ever get!
Does anyone know if this update has locked the bootloader?
jglm4u said:
This will be the last update we will ever get!
Click to expand...
Click to collapse
You have an inside line on this or just a feeling?
bootloader still unlocked, now I want to know if I can flash any MM roms on this PL1 baseband and software
can someone upload the zip?
Well, ****. My dumbass updated to PL1, then wiped the hell out of everything and now it won't let me revert to PK1....and there's no PL1 stock out there yet haha.
Does anyone know which samsung software we're supposed to use on these? i've tried kies 2.6, 3 and smart switch....none are working.....multiple PCs with fresh drivers, still nothing :/ I'm afraid i'm screwed until someone uploads a copy of PL1....and even then, who knows lol
---------- Post added at 02:46 PM ---------- Previous post was at 02:39 PM ----------
Update- tried flashing PK1 again thru ODIN....this time it got about 70% of the way thru flashing system.img.ext4 and then failed, kinda random.......but that's progress, right? Just means i need to keep trying i hope...
---------- Post added at 03:30 PM ---------- Previous post was at 02:46 PM ----------
--Further update--
So, relentlessly, I kept attempting....different USB ports, different cables, etc, and finally it worked 100%. Had to install TWRP, and reboot a few times cuz it got stuck, but....IT WORKED
What's wrong with Pl1, mines working great
akira6968 said:
Does anyone know which samsung software we're supposed to use on these? i've tried kies 2.6, 3 and smart switch....none are working.....multiple PCs with fresh drivers, still nothing :/ I'm afraid i'm screwed until someone uploads a copy of PL1....and even then, who knows lol
---------- Post added at 02:46 PM ---------- Previous post was at 02:39 PM ----------
Update- tried flashing PK1 again thru ODIN....this time it got about 70% of the way thru flashing system.img.ext4 and then failed, kinda random.......but that's progress, right? Just means i need to keep trying i hope...
---------- Post added at 03:30 PM ---------- Previous post was at 02:46 PM ----------
--Further update--
So, relentlessly, I kept attempting....different USB ports, different cables, etc, and finally it worked 100%. Had to install TWRP, and reboot a few times cuz it got stuck, but....IT WORKED
Click to expand...
Click to collapse
I can't count how many installs I've had fail due to crappy USB cords. You fight with it thinking it's software and then it dawns on you, wait maybe it's this cable that's only a few months old! I'm no IPhone fan, but they did it right with their phone cable port.
Also I thought I had read somewhere that you need to use your USB 2.0 port as sometimes that is an issue as well.
AndyB588 said:
I can't count how many installs I've had fail due to crappy USB cords. You fight with it thinking it's software and then it dawns on you, wait maybe it's this cable that's only a few months old! I'm no IPhone fan, but they did it right with their phone cable port.
Also I thought I had read somewhere that you need to use your USB 2.0 port as sometimes that is an issue as well.
Click to expand...
Click to collapse
I know USB 2.0 was a common recommendation a while back but recently read that USB 3.1 is backward compatible. Perhaps 3.0 is too but I was looking for latest.
Recently built a modular PC and got an USB adapter, if needed, but didn't need it. Last Odin session was Windows 10, did not run as administrator, used original Note 4 USB cable, USB 3.1 and USB driver downloaded from Samsung support for Note 4 which passed without issue. Flashed PJ1 stock tar (verified md5 from AFH upload by @LMMT from stock thread in general forum) using Odin 3.12.3 with Odin defaults.
https://forum.xda-developers.com/showthread.php?t=2711451
TWRP flash was with auto reboot option unchecked.
https://dl.twrp.me/trltespr/twrp-3.0.2-0-trltespr.img.tar
Motherboard is Gigabyte if that makes any difference.
Yeah, I get the frustration you're facing, I've dealt with it too. But my PC was 2009 era, not modular for component swapping and seriously needed replacing. Good news is Note 4 is compatible with updated PC and Windows 10.
Sent from my SM-N920P using Tapatalk
ddarkone said:
What's wrong with Pl1, mines working great
Click to expand...
Click to collapse
I'm thinking maybe nothing's wrong with PL1....this phone I have is apparently a victim of the widespread Note 4 eMMC error :/
In other words, flashing back to PK1 didn't fix it for me. random reboots, and frequent boot failures requiring extended battery pulls.
Still not convinced it's a hardware failure.... but that's probably due to my ignorance and optimism lol. No one seems to have truly found a fix-all for this :/