Today I installed AOSP status bar icon on my sgy via CWM. After successfully installing it and select reboot. my phone screen became black showing " Kernel panic upload mode"....What does it mean ? How to get out this ??
imElectronica said:
Today I installed AOSP status bar icon on my sgy via CWM. After successfully installing it and select reboot. my phone screen became black showing " Kernel panic upload mode"....What does it mean ? How to get out this ??
Click to expand...
Click to collapse
try getting in download mode and flash stock rom, or try to get in recovery mode and reflash rom
mjz2cool said:
try getting in download mode and flash stock rom, or try to get in recovery mode and reflash rom
Click to expand...
Click to collapse
i clear cache and wipe data then restore my CWM back up rom....but it is happening
imElectronica said:
i clear cache and wipe data then restore my CWM back up rom....but it is happening
Click to expand...
Click to collapse
try without restoring, just install stock rom or reflash the rom, but without restoring the backup
imElectronica said:
Today I installed AOSP status bar icon on my sgy via CWM. After successfully installing it and select reboot. my phone screen became black showing " Kernel panic upload mode"....What does it mean ? How to get out this ??
Click to expand...
Click to collapse
do remove the baterry and restart the phone ?
does it happening again?
if you doesnt when the screen comes long press the lock button untill phone is off the try to switch on
try it ?
i dont know the reason for it
Kernel panics occur when the system through a fatal error and find no more possibility will need to get the device/system alive and goes off.
its like the Bluescreen on Windows.
reasons can be: faulty memory accesses,defective hardware(not often),etc...
in the most its gone after reboot when not do a factory reset and flash new firmware.
-CALIBAN666- said:
Kernel panics occur when the system through a fatal error and find no more possibility will need to get the device/system alive and goes off.
its like the Bluescreen on Windows.
reasons can be: faulty memory accesses,defective hardware(not often),etc...
in the most its gone after reboot when not do a factory reset and flash new firmware.
Click to expand...
Click to collapse
so you mean it is the hard brick, right? and cannot the device be restored using usb jig as well?
its no hardbrick,when u have a hardbrick than your phone do nothing anymore!
Wow finally I witnessed a person who got the kernel panic mode!!
Take it to service centre and get replacement. They will take it as its a major software(?) issue
some days ago i haved a kernel panic too on my lg e610 by testing cm10.2 alpha build,after reboot it was done,but i was shocked.i have only opened the camera app for testing libs and boom.but phone worx well.
-CALIBAN666- said:
its no hardbrick,when u have a hardbrick than your phone do nothing anymore!
Click to expand...
Click to collapse
So the hard brick is what? Hardware failure?
Sent via Kamehaamehaa
---------- Post added at 03:18 AM ---------- Previous post was at 03:16 AM ----------
-CALIBAN666- said:
some days ago i haved a kernel panic too on my lg e610 by testing cm10.2 alpha build,after reboot it was done,but i was shocked.i have only opened the camera app for testing libs and boom.but phone worx well.
Click to expand...
Click to collapse
Then how did you get it working?
Sent via Kamehaamehaa
hardbrick you see when the does nothing,no boot,pc does not recognise no nothing,its dead.most in case that is when the hardware is broken,when your phone goes on and boot its not hardbricked,your screen goes on but is black you said,so the phone lives,hardbrick is the end.
and i have wiped all in rescuemodus and have flashed new firmware.but it was my lg e610.
-CALIBAN666- said:
hardbrick you see when the does nothing,no boot,pc does not recognise no nothing,its dead.most in case that is when the hardware is broken,when your phone goes on and boot its not hardbricked,your screen goes on but is black you said,so the phone lives,hardbrick is the end.
and i have wiped all in rescuemodus and have flashed new firmware.but it was my lg e610.
Click to expand...
Click to collapse
So what can be the possible causes of hardbrick?
Sent via Kamehaamehaa
dead bootloader,corrupted efs partition,hardware is dead like Phonemainboard have defekts,Battery overload,Overheating from device because use an overclocked Kernel,but not on SGY there is no real overclocking.It drops in water +++++
---------- Post added at 12:53 AM ---------- Previous post was at 12:42 AM ----------
for more infos you can try to ask Doky73 he is the only one i knows with a real hardbricked SGY(anyone correct me if im wrong),so far as i know he has flashed a not supporting bootloader or something,not 100% sure
-CALIBAN666- said:
dead bootloader,corrupted efs partition,hardware is dead like Phonemainboard have defekts,Battery overload,Overheating from device because use an overclocked Kernel,but not on SGY there is no real overclocking.It drops in water +++++
---------- Post added at 12:53 AM ---------- Previous post was at 12:42 AM ----------
for more infos you can try to ask Doky73 he is the only one i knows with a real hardbricked SGY(anyone correct me if im wrong),so far as i know he has flashed a not supporting bootloader or something,not 100% sure
Click to expand...
Click to collapse
Yeah thanks...
Sent via Kamehaamehaa
allways welcome brother.
-CALIBAN666- said:
dead bootloader,corrupted efs partition,hardware is dead like Phonemainboard have defekts,Battery overload,Overheating from device because use an overclocked Kernel,but not on SGY there is no real overclocking.It drops in water +++++
---------- Post added at 12:53 AM ---------- Previous post was at 12:42 AM ----------
for more infos you can try to ask Doky73 he is the only one i knows with a real hardbricked SGY(anyone correct me if im wrong),so far as i know he has flashed a not supporting bootloader or something,not 100% sure
Click to expand...
Click to collapse
I'm facing this after flashing AOSP status bar icon pack....I've also two error....Plz see here.... http://forum.xda-developers.com/showthread.php?t=2418805
Today an user had same issue like me on cm10.1,i had it with cm10.2.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
GREEEETZ!!!!
-CALIBAN666- said:
Today an user had same issue like me on cm10.1,i had it with cm10.2.
GREEEETZ!!!!
Click to expand...
Click to collapse
Any idea to fix it....for SGY.
Not realy sure bro,sorry.for me a flash in rescue modus have solved the issue.have you tryd to flash a new firmware with "bootloader" not pit?
GREEEETZ!!!!
---------- Post added at 05:27 AM ---------- Previous post was at 05:19 AM ----------
When needet you can download an bootloader and all that you need(i hope it helps)from my link.
http://forum.xda-developers.com/showthread.php?p=32556674
Maybe it will help
GREEEETZ!!!!
Related
MIUI V6 ROM on ZTE Blade Q Maxi
Original port is made by Ravinder Singh, all credits to him and many thanks
Ported by me to ZTE blade Q maxi
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4,2,2 ROM
Instalation method
Download
Link updated
in the archive you will find two zip's, one is the rom and the other is gaaps package
extract those two zip's from the archive and copy on the sdcard
reboot the phone in recoveryCWM(not stok)
Did first a backup of your previous working rom(just in case)
"wipe data factory reset"
"install zip from sdcard"/"choose zip"(select the rom zip)/"yes install"
Aroma installer will start to install the rom
when it finish, go to recovery menu and install the gaaps package
without wipe
when all are ready, reboot the phone
after all this the rom will work fine, i dont find other problem or bugs
if you get, let me know
Language in the rom are english and chineze, for other language use "language enabler' or "more locale1-2"
Your phone warranty will be lost, so you do it on your risck
Hope you will like it
XDA:DevDB Information
MIUIv6, ROM for the ZTE Blade
Contributors
vaserbanix
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Version Information
Status: Testing
Created 2015-04-27
Last Updated 2016-12-05
Reserved
Reserved
Great! I will flash it as soon as possible. And will come back with impressions.
I have tried to port around this rom here: http://www.needrom.com/download/ios-7-for-canvas-juice/. But of course, for me is just bootloop. Sad
Edit: If I get wrong IMEI, is it ok to let it as it is? Is it necessary to change it? Does it make a difference?
@deepside_dj
i recomand you to put your IMEI
Installing right now. I've been using your v5 ROM for months and months and it's the best ROM, by far, for me, so I'm really excited for v6. Will come back later today with a first-look review.
Thank you very much for working on this phone!!
---------- Post added at 09:45 AM ---------- Previous post was at 09:21 AM ----------
Ok, so it changed my IMEI and I don't know to change it back. MTKDroid doesn't see the phone when i connect it via usb (neither usb storage mode or media device setting). What should be done to restore the IMEI?
guys , this is givin me boot loop, some help please, i wanna try it , look damn good
Punkomatul said:
Installing right now. I've been using your v5 ROM for months and months and it's the best ROM, by far, for me, so I'm really excited for v6. Will come back later today with a first-look review.
Thank you very much for working on this phone!!
---------- Post added at 09:45 AM ---------- Previous post was at 09:21 AM ----------
Ok, so it changed my IMEI and I don't know to change it back. MTKDroid doesn't see the phone when i connect it via usb (neither usb storage mode or media device setting). What should be done to restore the IMEI?
Click to expand...
Click to collapse
enable usb debugging in seting/developer option
kill moves said:
guys , this is givin me boot loop, some help please, i wanna try it , look damn good
Click to expand...
Click to collapse
you are extract the zips from dounloded zip?
vaserbanix said:
you are extract the zips from dounloded zip?
Click to expand...
Click to collapse
yes of course, 2 zips, rom and gapps, and i installed them in order, i tried with wipe, without..... the same...it gives me bootloop
kill moves said:
yes of course, 2 zips, rom and gapps, and i installed them in order, i tried with wipe, without..... the same...it gives me bootloop
Click to expand...
Click to collapse
on "punkomatul" phone it work.
so download again
vaserbanix said:
on "punkomatul" phone it work.
so download again
Click to expand...
Click to collapse
k then , its downloadin .. will you try to port that ios rom ? i saw the link given by deepside dj
vaserbanix said:
enable usb debugging in seting/developer option
Click to expand...
Click to collapse
Oh, thanks! I changed the IMEI now.
---------- Post added at 10:20 AM ---------- Previous post was at 10:08 AM ----------
I updated Gmail and YouTube and they stopped working. Uninstalled updates and they work again.
Chrome, Facebook, Messenger, Whatsapp, Evernote, Goodreads, work just fine.
Medscape log-in is now working in-app so that's the biggest plus for me as compared with v5.
i tried it again and again..still bootloop.;..guess i will stick to another then...
kill moves said:
i tried it again and again..still bootloop.;..guess i will stick to another then...
Click to expand...
Click to collapse
install first the rom, reboot it and then install the gaaps
edit: i checked the rom zip and the gaaps zip and it work very well
anyway in about 1 hour i will upload a modified zip of rom,
i managed to eliminate that wrong IMEI
edit2: Link updated
Can we add the IMEI fix without installing the ROM all over again ?
Punkomatul said:
Can we add the IMEI fix without installing the ROM all over again ?
Click to expand...
Click to collapse
download the archive and install only the rom zip
without wipe, then chek the imei.
should be the good one and a null one.
if not. then mast do a full wipe
Ok i tried installing the ROM without wipe and it did not work. Reinstalled and IMEI is back to the original.
Thanks!
Also it doesn't seem like my GPS is working it just searches for the location and then says "Your location is temporarily unavailable" even thou access is granted to apps to use GPS. Any thoughts on how to fix it?
Punkomatul said:
Ok i tried installing the ROM without wipe and it did not work. Reinstalled and IMEI is back to the original.
Thanks!
Also it doesn't seem like my GPS is working it just searches for the location and then says "Your location is temporarily unavailable" even thou access is granted to apps to use GPS. Any thoughts on how to fix it?
Click to expand...
Click to collapse
install MTKengeneering from market.
start mtkengeneering, go to MTK setings/ Locations/locations base service / agps and press load profile, then go to gps and press gps on(of), after that it will start to search and find
vaserbanix said:
install MTKengeneering from market.
start mtkengeneering, go to MTK setings/ Locations/locations base service / agps and press load profile, then go to gps and press gps on(of), after that it will start to search and find
Click to expand...
Click to collapse
That is awesome! It fixed the GPS. Thanks a lot mate, you're truly the best!
Dear friends
Have just bought a Note 4 (SM910F) and spend a few hours yesterday and failed to install ANY custom ROM on my device.
Status: Currently on Lollipop 5.0.1, not Root
1. Installed TWRP (and tried CWM)
2. Downloaded custom ROM to sdcard
3. Booted into recovery mode.
4. Wipe cache/dalvik
4. Install from zip
5. Result = Boot loop
Recovered the phone by using ODIN and stock firmware (which reverts to stock recovery). I tried about 4 different ROMS (Cm12, x-note, sweet, etc) and all had the same result. Only thing i can think of is ...do I need to root BEFORE I try installing a custom ROM? i dont remember doing this with my Note 3.
Ive been using the Note series for years and have never had this issue installing a custom ROM. Can anyone help? I cant use the Note 4 in its current state!
I can't see FACTORY RESET in the list ???
ludoke said:
I can't see FACTORY RESET in the list ???
Click to expand...
Click to collapse
You're right i did not include it in my original post but i did try factory reset.
is there anything i'm missing? Thakns
afaqali said:
You're right i did not include it in my original post but i did try factory reset.
is there anything i'm missing? Thakns
Click to expand...
Click to collapse
Wrong TWRP ?
Wrong rom ?
Bootloader?
Coold be many things
ludoke said:
Wrong TWRP ?
Wrong rom ?
Bootloader?
Coold be many things
Click to expand...
Click to collapse
Thank you for your response.
1. TWRP - Im sure i have the right one.
1. The ROMS are definitely compatible with the device. I checked.
2. Bootloader? hmm does this get installed by the recovery module or something I had to directly install?
Anyway no harm in starting fresh. Il re-download everything and make sure I have it right.
Thanks
You said currently 5.0.1, did you do an upgrade from Kitkat ? Kitkat and Lollipop has different bootloaders and is the reason for most of troubles with flashing.
Go back to stock en go further on,at first root with Chainfire-Auto root then flash the right TWRP ,i use TWRP 2.8.6.0. Do NOT use 2.8.5.0!!!!!. Iam using Odin 3.09 for flashing.
---------- Post added at 02:25 PM ---------- Previous post was at 02:19 PM ----------
Please ,post screenshot from settings,about device
ludoke said:
You said currently 5.0.1, did you do an upgrade from Kitkat ? Kitkat and Lollipop has different bootloaders and is the reason for most of troubles with flashing.
Go back to stock en go further on,at first root with Chainfire-Auto root then flash the right TWRP ,i use TWRP 2.8.6.0. Do NOT use 2.8.5.0!!!!!. Iam using Odin 3.09 for flashing.
---------- Post added at 02:25 PM ---------- Previous post was at 02:19 PM ----------
Please ,post screenshot from settings,about device
Click to expand...
Click to collapse
When you say go back to stock? do you mean recovery or the firmware? the device came with lollipop installed. Thank you though. Il use the TWRP you recommended.
afaqali said:
You're right i did not include it in my original post but i did try factory reset.
is there anything i'm missing? Thakns
Click to expand...
Click to collapse
afaqali said:
When you say go back to stock? do you mean recovery or the firmware? the device came with lollipop installed. Thank you though. Il use the TWRP you recommended.
Click to expand...
Click to collapse
By stock ,i mean the firmware.
So if the device came with Lollipop it should have the Lollipop bootloader. An you must search for root and Twrp for Galaxy Note 4 Lollipop root + Twrp Altough on my S4 they work for both.
Did you buy the phone new or second hand? If on second hand ,did you verrify it was working ok?
And IMPORTANT if you buy second hand ,it could be a clone,what dit you pay if in this case?
---------- Post added at 03:22 PM ---------- Previous post was at 03:13 PM ----------
Please download from the Playstore PhoneInfo,it's for samsung devices and search in the harware section for Snapdragon or Exynos, if that not appears you are ****ed ,witch means it's a clone
ludoke said:
By stock ,i mean the firmware.
So if the device came with Lollipop it should have the Lollipop bootloader. An you must search for root and Twrp for Galaxy Note 4 Lollipop root + Twrp Altough on my S4 they work for both.
Did you buy the phone new or second hand? If on second hand ,did you verrify it was working ok?
And IMPORTANT if you buy second hand ,it could be a clone,what dit you pay if in this case?
---------- Post added at 03:22 PM ---------- Previous post was at 03:13 PM ----------
Please download from the Playstore PhoneInfo,it's for samsung devices and search in the harware section for Snapdragon or Exynos, if that not appears you are ****ed ,witch means it's a clone
Click to expand...
Click to collapse
Dont think its a clone but to be sure ive checked and its a qualcom snapdragon, however im not sure if the owner before me bought it with lollipop or kk and upgraded it. How can i check if it has the right bootloader? wouldnt installing a ROM update the bootloader too?
Also i have the stock firmware installed.
So the plan is:
1. Update the recovery to TWRP (version you mentioned)
2. Root with CF-autoroot
2. Wipe the system clean, inc dalvik, cache
3. Install custom ROM
Sound good?
And screenshot attached of phone settings
http://imgur.com/scqnKbA
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Help pls...
My redmi 2 can boot but screen off... i can receive messages but cannot turn on screen...
Also phone overheat like mad and i cannot power off. Can only take out battery to stop heatingProblem Solved
My phone has a custom ROM installed but it also happens to those with stock ROM(i read)
It is successfully rooted so it is not root problem
EDIT: I can access the screen on screencast program. Problem is my screen still shows nothing Now it dosent work (idk why)
EDIT: Managed to use ADB pull to grab files from phone. Will flashing the ROM again solve the problem?
EDIT: I can boot fastboot. But recovery not working...Solved
Update
Now i managed to grab some screenshots
And i dunno why it doesnt show up properly
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flash TWRP via Fastboot , then You might wanna Reflash Different ROMs .. I actually Don't understand your Problem , but as for the heating part , do you have MKV files Stored in your phone
No
I don't have MKV files (whatever they are, media files or what). The phone managed to boot recovery but screen still... U know.
???????????
chuaj6363 said:
I don't have MKV files (whatever they are, media files or what). The phone managed to boot recovery but screen still... U know.
Click to expand...
Click to collapse
And I have a intention to flash a ROM but how do I do it when my phone screen is blank?
Hollow6 said:
Flash TWRP via Fastboot , then You might wanna Reflash Different ROMs .. I actually Don't understand your Problem , but as for the heating part , do you have MKV files Stored in your phone
Click to expand...
Click to collapse
I have TWRP
Hollow6 said:
I actually Don't understand your Problem
Click to expand...
Click to collapse
Ok heres the problem
Can boot to all partitions(fastboot,twrp,system)
now when i try poweron it vibrates, then heats up.
Screen is off all the time...
Then Don't you think Your LCD is broken ? Does anything comes up ? Even The MI logo ?
---------- Post added at 04:24 PM ---------- Previous post was at 04:21 PM ----------
chuaj6363 said:
I don't have MKV files (whatever they are, media files or what). The phone managed to boot recovery but screen still... U know.
???????????
Click to expand...
Click to collapse
Mkv files are Video Files ... The Heating part is Due to Media server bug if MKV files were there
Hollow6 said:
Then Don't you think Your LCD is broken ? Does anything comes up ? Even The MI logo ?
---------- Post added at 04:24 PM ---------- Previous post was at 04:21 PM ----------
Mkv files are Video Files ... The Heating part is Due to Media server bug if MKV files were there
Click to expand...
Click to collapse
Ok i have no mkv files
The LCD is working, my TWRP could vibrate upon touch
Not even the MI Logo.
Tried Flashing Stock ROM via Fastboot ?
Hollow6 said:
Tried Flashing Stock ROM via Fastboot ?
Click to expand...
Click to collapse
ok i dont like the stock ROM
so how do you flash via Fastboot
Heating problem & battery problem= Fixed!
Screen... u know...
Help for flashing, Will Mi Flash work?
That didnt work
Mi flash didnt work
Now what?
chuaj6363 said:
Mi flash didnt work
Now what?
Click to expand...
Click to collapse
Why ? Any Error ? What procedure you Followed
Hollow6 said:
Why ? Any Error ? What procedure you Followed
Click to expand...
Click to collapse
Forget Mi Flash
Can u recommend me any flash tool (not MTK) so I can flash ROM?
No alternate Tool that I know of for MI , Sorry here
Hollow6 said:
No alternate Tool that I know of for MI , Sorry here
Click to expand...
Click to collapse
i mean for any smartphone
Hollow6 said:
Tried Flashing Stock ROM via Fastboot ?
Click to expand...
Click to collapse
How do I do that?
chuaj6363 said:
How do I do that?
Click to expand...
Click to collapse
Try this
http://en.miui.com/a-232.html
Hollow6 said:
Try this
http://en.miui.com/a-232.html
Click to expand...
Click to collapse
i tried it and my phone screen is still blank
Now i want to know if my phone is a genuine phone. how?
it seems like a hardware problem tho
Hi There..
I bought a used Galaxy S4 from a local market, I checked it on the shop it was working fine. But as soon as reached home It started rebooting. I went back to him and bargained but in vain.
So I don't know why is this issue, I tried Hard Reset, changing the battery, changing the firmware (now it is on the latest one), searching on the other forums and applied their solution, tried each & every suggestion available on the internet but the same issue :'( :crying:
It reboots only in stand-by mode, not when in use & LCD is on.
Any suggestion would highly be appreciated
P.S Before posting I doubled checked every thread on this site.
What rom you are on
Right Now I'm on Android Version 5.0.1
and build no is: LRX22C.i9506XXUDPG2
are you using sd card? try the phone without it
frgo said:
are you using sd card? try the phone without it
Click to expand...
Click to collapse
No, I'm not using
is there any way to know if it's any hardware fault ? (like CPU)
Ahhsan said:
Right Now I'm on Android Version 5.0.1
and build no is: LRX22C.i9506XXUDPG2
Click to expand...
Click to collapse
Did you flash it in or it has been already in there?
Did you confirm that the model # is gt-i9506 in download mode?
audit13 said:
Did you confirm that the model # is gt-i9506 in download mode?
Click to expand...
Click to collapse
yes double checked
If it is randomly rebooting on a stock ROM, it could be a battery or motherboard issue. You have another battery to try?
audit13 said:
If it is randomly rebooting on a stock ROM, it could be a battery or motherboard issue. You have another battery to try?
Click to expand...
Click to collapse
yes I tried not only on one, but 3 battries but the issue is same..
How can I confirm if it is a hardware issue ?
There is really no way to confirm that it is a hardware problem unless you can swap out the motherboard for a know working motherboard without changing any other parts.
Can you flash a new rom?
a602820922 said:
Can you flash a new rom?
Click to expand...
Click to collapse
yes, which rom should I flash ?
If the phone is rebooting on a completely stock ROM, I don't think any ROM, stock or custom, is going to help.
flash with odin stock firmware mate.
audit13 said:
If the phone is rebooting on a completely stock ROM, I don't think any ROM, stock or custom, is going to help.
Click to expand...
Click to collapse
It's worth to try.
Ahhsan said:
yes, which rom should I flash ?
Click to expand...
Click to collapse
What's your phone details?
Can you post a print screen for us?
Like this ones?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The most stable ROM for the s4 is a stock ROM which the OP has already tried. The OP has also tried different batteries.
Yes, it may be worth a try but flashing a custom ROM will trip knox and, if the vendor decides to take the phone back, tripping knox will inform the vendor that the phone has been flashed with non-official Samsung firmware.
Well if he could to take the phone back he probably would do that already, but it looks like he can't or he doesn't want to.
Probably there is no warranty on it anyway.
My advice according to what "audit13" said... take it back ASAP if you can of course.
---------- Post added at 07:21 PM ---------- Previous post was at 07:16 PM ----------
Ahhsan said:
yes, which rom should I flash ?
Click to expand...
Click to collapse
You have to choose what you want :
1.kit kat rom
2.Lollipop rom
3.marchmallow
Then let us know so we can assist you with flashing
---------- Post added at 07:32 PM ---------- Previous post was at 07:21 PM ----------
asadnow2k said:
flash with odin stock firmware mate.
Click to expand...
Click to collapse
That's a good advice as well, if you fancy with a stock rom.
here its a link to find repair firmware
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
including pit files in it
SAMSUNG EXPERIENCE ROM FOR REDMI 5 PLUS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This ROM is Ported from Samsung A6s. The ROM is made stable for Redmi 5 Plus by fixing bugs.
What's Working: Everything except the Samsung camera
Bugs: Some minor bugs
Links:
https://drive.google.com/file/d/1DPHQ6XHRO5_3uPMXyG1SsQ4G9X-t-Y-O/view?usp=sharing
Credits:
@rashidmalyk Bugs fixing, testing and stable vendor
@Hemant for ROM Base
ROM OS Version: 8.1.0 Oreo
ROM Firmware Required: Oreo Treble
Ported from: Samsung A6s
Version Information
Version: 1.0
Status: Stable
Hit thanks button!
Reserved
Always on display include?
Sent from my [device_name] using XDA-Developers Legacy app
can we falsh it on a miui rom or treble? cause the miui rom keeps booting into fastboot and i mean if we can start from a miui rom
SeerePetrova said:
can we falsh it on a miui rom or treble? cause the miui rom keeps booting into fastboot and i mean if we can start from a miui rom
Click to expand...
Click to collapse
Just copy vendor files from Vendor SE folder and replace them with vendor files in samsungex folder, install treble supported recovery clean all the partitions including vendor partition
M.z said:
Always on display include?
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
NOPE, the coming OneUI will have AOD!
What are the minor bugs? Thanks for the work tho!
It keeps bootlooping
Wow, Thank You Bro., Theme Store is included ?
What is camera app?
maimra said:
It keeps bootlooping
Click to expand...
Click to collapse
same here! woah. I follow all instructions. thanks
It keeps bootlooping.
but i use other rom samsung and work perfectly.
---------- Post added at 08:12 AM ---------- Previous post was at 08:10 AM ----------
https://drive.google.com/uc?id=1q8c_Zu1rYzloWW3pAmJ2eGapBZ-TMQJ3&export=download
restore all
boot
system
and ....
do not need patch or vendor or ...
only restore this rom and reboot to system
after reboot to android go to the recovery and flash open gaps and swipe factory reset and enjoy
maimra said:
It keeps bootlooping
Click to expand...
Click to collapse
i got same issue, stuck in bootloop. plz help
zxo004 said:
It keeps bootlooping.
but i use other rom samsung and work perfectly.
---------- Post added at 08:12 AM ---------- Previous post was at 08:10 AM ----------
https://drive.google.com/uc?id=1q8c_Zu1rYzloWW3pAmJ2eGapBZ-TMQJ3&export=download
restore all
boot
system
and ....
do not need patch or vendor or ...
only restore this rom and reboot to system
after reboot to android go to the recovery and flash open gaps and swipe factory reset and enjoy
Click to expand...
Click to collapse
Awww. Is this effecrive?
zxo004 said:
It keeps bootlooping.
but i use other rom samsung and work perfectly.
---------- Post added at 08:12 AM ---------- Previous post was at 08:10 AM ----------
https://drive.google.com/uc?id=1q8c_Zu1rYzloWW3pAmJ2eGapBZ-TMQJ3&export=download
restore all
boot
system
and ....
do not need patch or vendor or ...
only restore this rom and reboot to system
after reboot to android go to the recovery and flash open gaps and swipe factory reset and enjoy
Click to expand...
Click to collapse
Wow Bro., How to add Theme Store in this rom, Tq?
zxo004 said:
It keeps bootlooping.
but i use other rom samsung and work perfectly.
---------- Post added at 08:12 AM ---------- Previous post was at 08:10 AM ----------
https://drive.google.com/uc?id=1q8c_Zu1rYzloWW3pAmJ2eGapBZ-TMQJ3&export=download
restore all
boot
system
and ....
do not need patch or vendor or ...
only restore this rom and reboot to system
after reboot to android go to the recovery and flash open gaps and swipe factory reset and enjoy
Click to expand...
Click to collapse
Can you please mention here the source thread of this rom?
Thanks
Bros, after flashing this ROM gravity sensor stopped working. Pl fix this Dev in Rom, Tq.
Thank for hardwork.
Rom stable, can use daily.
https://youtu.be/SmjyfxOzOCM
bacmeogia said:
Thank for hardwork.
Rom stable, can use daily.
https://youtu.be/SmjyfxOzOCM
Click to expand...
Click to collapse
Bro., How to flash please, video, Theme Store is working, Tq ?
maimra said:
It keeps bootlooping
Click to expand...
Click to collapse
mavid26 said:
same here! woah. I follow all instructions. thanks
Click to expand...
Click to collapse
tanweer17 said:
i got same issue, stuck in bootloop. plz help
Click to expand...
Click to collapse
I tested this ROM for many times so it become enough stable and working on every device, idk what is happening with your devices.
Follow these instructions: from the bootloop reboot to recovery, again flash the patches in order, also I'm going to add other patches (the patches solved the bootloop after flashing the ZenUI), that may fix it for you.