Database Users

[Help]Kernel Panic Upload mode

Today I installed AOSP status bar icon on my sgy via CWM. After successfully installing it and select reboot. my phone screen became black showing " Kernel panic upload mode"....What does it mean ? How to get out this ??

imElectronica said:
Today I installed AOSP status bar icon on my sgy via CWM. After successfully installing it and select reboot. my phone screen became black showing " Kernel panic upload mode"....What does it mean ? How to get out this ??
Click to expand...
Click to collapse
try getting in download mode and flash stock rom, or try to get in recovery mode and reflash rom

mjz2cool said:
try getting in download mode and flash stock rom, or try to get in recovery mode and reflash rom
Click to expand...
Click to collapse
i clear cache and wipe data then restore my CWM back up rom....but it is happening

imElectronica said:
i clear cache and wipe data then restore my CWM back up rom....but it is happening
Click to expand...
Click to collapse
try without restoring, just install stock rom or reflash the rom, but without restoring the backup

imElectronica said:
Today I installed AOSP status bar icon on my sgy via CWM. After successfully installing it and select reboot. my phone screen became black showing " Kernel panic upload mode"....What does it mean ? How to get out this ??
Click to expand...
Click to collapse
do remove the baterry and restart the phone ?
does it happening again?
if you doesnt when the screen comes long press the lock button untill phone is off the try to switch on
try it ?
i dont know the reason for it

Kernel panics occur when the system through a fatal error and find no more possibility will need to get the device/system alive and goes off.
its like the Bluescreen on Windows.
reasons can be: faulty memory accesses,defective hardware(not often),etc...
in the most its gone after reboot when not do a factory reset and flash new firmware.

-CALIBAN666- said:
Kernel panics occur when the system through a fatal error and find no more possibility will need to get the device/system alive and goes off.
its like the Bluescreen on Windows.
reasons can be: faulty memory accesses,defective hardware(not often),etc...
in the most its gone after reboot when not do a factory reset and flash new firmware.
Click to expand...
Click to collapse
so you mean it is the hard brick, right? and cannot the device be restored using usb jig as well?

its no hardbrick,when u have a hardbrick than your phone do nothing anymore!

Wow finally I witnessed a person who got the kernel panic mode!!
Take it to service centre and get replacement. They will take it as its a major software(?) issue

some days ago i haved a kernel panic too on my lg e610 by testing cm10.2 alpha build,after reboot it was done,but i was shocked.i have only opened the camera app for testing libs and boom.but phone worx well.

-CALIBAN666- said:
its no hardbrick,when u have a hardbrick than your phone do nothing anymore!
Click to expand...
Click to collapse
So the hard brick is what? Hardware failure?
Sent via Kamehaamehaa
---------- Post added at 03:18 AM ---------- Previous post was at 03:16 AM ----------
-CALIBAN666- said:
some days ago i haved a kernel panic too on my lg e610 by testing cm10.2 alpha build,after reboot it was done,but i was shocked.i have only opened the camera app for testing libs and boom.but phone worx well.
Click to expand...
Click to collapse
Then how did you get it working?
Sent via Kamehaamehaa

hardbrick you see when the does nothing,no boot,pc does not recognise no nothing,its dead.most in case that is when the hardware is broken,when your phone goes on and boot its not hardbricked,your screen goes on but is black you said,so the phone lives,hardbrick is the end.
and i have wiped all in rescuemodus and have flashed new firmware.but it was my lg e610.

-CALIBAN666- said:
hardbrick you see when the does nothing,no boot,pc does not recognise no nothing,its dead.most in case that is when the hardware is broken,when your phone goes on and boot its not hardbricked,your screen goes on but is black you said,so the phone lives,hardbrick is the end.
and i have wiped all in rescuemodus and have flashed new firmware.but it was my lg e610.
Click to expand...
Click to collapse
So what can be the possible causes of hardbrick?
Sent via Kamehaamehaa

dead bootloader,corrupted efs partition,hardware is dead like Phonemainboard have defekts,Battery overload,Overheating from device because use an overclocked Kernel,but not on SGY there is no real overclocking.It drops in water +++++
---------- Post added at 12:53 AM ---------- Previous post was at 12:42 AM ----------
for more infos you can try to ask Doky73 he is the only one i knows with a real hardbricked SGY(anyone correct me if im wrong),so far as i know he has flashed a not supporting bootloader or something,not 100% sure

-CALIBAN666- said:
dead bootloader,corrupted efs partition,hardware is dead like Phonemainboard have defekts,Battery overload,Overheating from device because use an overclocked Kernel,but not on SGY there is no real overclocking.It drops in water +++++
---------- Post added at 12:53 AM ---------- Previous post was at 12:42 AM ----------
for more infos you can try to ask Doky73 he is the only one i knows with a real hardbricked SGY(anyone correct me if im wrong),so far as i know he has flashed a not supporting bootloader or something,not 100% sure
Click to expand...
Click to collapse
Yeah thanks...
Sent via Kamehaamehaa

allways welcome brother.

-CALIBAN666- said:
dead bootloader,corrupted efs partition,hardware is dead like Phonemainboard have defekts,Battery overload,Overheating from device because use an overclocked Kernel,but not on SGY there is no real overclocking.It drops in water +++++
---------- Post added at 12:53 AM ---------- Previous post was at 12:42 AM ----------
for more infos you can try to ask Doky73 he is the only one i knows with a real hardbricked SGY(anyone correct me if im wrong),so far as i know he has flashed a not supporting bootloader or something,not 100% sure
Click to expand...
Click to collapse
I'm facing this after flashing AOSP status bar icon pack....I've also two error....Plz see here.... http://forum.xda-developers.com/showthread.php?t=2418805

Today an user had same issue like me on cm10.1,i had it with cm10.2.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
GREEEETZ!!!!

-CALIBAN666- said:
Today an user had same issue like me on cm10.1,i had it with cm10.2.
GREEEETZ!!!!
Click to expand...
Click to collapse
Any idea to fix it....for SGY.

Not realy sure bro,sorry.for me a flash in rescue modus have solved the issue.have you tryd to flash a new firmware with "bootloader" not pit?
GREEEETZ!!!!
---------- Post added at 05:27 AM ---------- Previous post was at 05:19 AM ----------
When needet you can download an bootloader and all that you need(i hope it helps)from my link.
http://forum.xda-developers.com/showthread.php?p=32556674
Maybe it will help
GREEEETZ!!!!

Look, How am I lucky ?!... Really (lucky) Help !

I did ask you to help me for my modem problem ...
Thanks all of you help me .. but I didn't work ...
I just payed 50$ .. in order to solve it ..
Now, my Camera doesn't work ..
I tried all the fixes which I found it here ...
Please, help ..
I don't want to pay one more time ...

First, why did you pay and what did you pay for?
Second, we need your ROM.
Third, what did you do to get this?

The guys who roped him off (ones he paid) probably flashed him a wrong firmware without camera fix.
We need your phone serial number & ROM serial to identify what it is.

Jhnsn said:
First, why did you pay and what did you pay for?
Second, we need your ROM.
Third, what did you do to get this?
Click to expand...
Click to collapse
I don't know why doesn't it work ?
this my rom
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

mrbahaa9 said:
I don't know why doesn't it work ?
this my rom
Click to expand...
Click to collapse
LOL!
Because you are on not public M. M. Alpha.
The M comes with new camera api that is not exactly compatible with old camera driver's.
Advice is to revert back to Lollipop.

Zola III said:
LOL!
Because you are on not public M. M. Alpha.
The M comes with new camera api that is not exactly compatible with old camera driver's.
Advice is to revert back to Lollipop.
Click to expand...
Click to collapse
So how can I solve this problem ?!
It made me crazy ...

Do the camera or cameras work on any rom???
They certainly won't work as they should on M.

Zola III said:
Do the camera or cameras work on any rom???
They certainly won't work as they should on M.
Click to expand...
Click to collapse
it didn't work on any rom ... never ...

@Zola III ...
there is something strange ...
that the front camera is active but the basic one in not ...

Did it work on stock firmware?
Did you or someone else disassembled the phone before?

Zola III said:
Did it work on stock firmware?
Did you or someone else disassembled the phone before?
Click to expand...
Click to collapse
No it didn't work on stock firmware ...
and no there is no one disassembled the phone before ...

There are two tips of the main camera sensors.
Before of that you tried with CM 12.1 with & without camera fix? As the fix addresses just that - other sensor.
If it didn't work anyhow with CM12.1 then problem is elsewhere.
When & exactly how did you're rare cam stopped working?

Zola III said:
There are two tips of the main camera sensors.
Before of that you tried with CM 12.1 with & without camera fix? As the fix addresses just that - other sensor.
If it didn't work anyhow with CM12.1 then problem is elsewhere.
When & exactly how did you're rare cam stopped working?
Click to expand...
Click to collapse
I tried all these things but It didn't work ?
My camera stopped work when efs files of my phone changed ....

Go to Sam mobile, search for the latest firmware, firmwares for your region, download & flash them. You will also find the instructions there how to flash. For this you will also need to revert back to default recovery I hope you made a Flasfify backup of it. Also I hope you staid on EXT4 file system.
The only way to flash back proper full stock with all blobs & everything.
---------- Post added at 05:39 PM ---------- Previous post was at 05:37 PM ----------
If you don't know how to do it find someone who does it for a living & pay 5~10€ for it.

Zola III said:
Go to Sam mobile, search for the latest firmware, firmwares for your region, download & flash them. You will also find the instructions there how to flash. For this you will also need to revert back to default recovery I hope you made a Flasfify backup of it. Also I hope you staid on EXT4 file system.
The only way to flash back proper full stock with all blobs & everything.
---------- Post added at 05:39 PM ---------- Previous post was at 05:37 PM ----------
If you don't know how to do it find someone who does it for a living & pay 5~10€ for it.
Click to expand...
Click to collapse
I did that, but it didn't change anything ... unfortunately

New Galaxy S4 Random Reboot

Hi There..
I bought a used Galaxy S4 from a local market, I checked it on the shop it was working fine. But as soon as reached home It started rebooting. I went back to him and bargained but in vain.
So I don't know why is this issue, I tried Hard Reset, changing the battery, changing the firmware (now it is on the latest one), searching on the other forums and applied their solution, tried each & every suggestion available on the internet but the same issue :'( :crying:
It reboots only in stand-by mode, not when in use & LCD is on.
Any suggestion would highly be appreciated
P.S Before posting I doubled checked every thread on this site.

What rom you are on

Right Now I'm on Android Version 5.0.1
and build no is: LRX22C.i9506XXUDPG2

are you using sd card? try the phone without it

frgo said:
are you using sd card? try the phone without it
Click to expand...
Click to collapse
No, I'm not using
is there any way to know if it's any hardware fault ? (like CPU)

Ahhsan said:
Right Now I'm on Android Version 5.0.1
and build no is: LRX22C.i9506XXUDPG2
Click to expand...
Click to collapse
Did you flash it in or it has been already in there?

Did you confirm that the model # is gt-i9506 in download mode?

audit13 said:
Did you confirm that the model # is gt-i9506 in download mode?
Click to expand...
Click to collapse
yes double checked

If it is randomly rebooting on a stock ROM, it could be a battery or motherboard issue. You have another battery to try?

audit13 said:
If it is randomly rebooting on a stock ROM, it could be a battery or motherboard issue. You have another battery to try?
Click to expand...
Click to collapse
yes I tried not only on one, but 3 battries but the issue is same..
How can I confirm if it is a hardware issue ?

There is really no way to confirm that it is a hardware problem unless you can swap out the motherboard for a know working motherboard without changing any other parts.

Can you flash a new rom?

a602820922 said:
Can you flash a new rom?
Click to expand...
Click to collapse
yes, which rom should I flash ?

If the phone is rebooting on a completely stock ROM, I don't think any ROM, stock or custom, is going to help.

flash with odin stock firmware mate.

audit13 said:
If the phone is rebooting on a completely stock ROM, I don't think any ROM, stock or custom, is going to help.
Click to expand...
Click to collapse
It's worth to try.

Ahhsan said:
yes, which rom should I flash ?
Click to expand...
Click to collapse
What's your phone details?
Can you post a print screen for us?
Like this ones?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

The most stable ROM for the s4 is a stock ROM which the OP has already tried. The OP has also tried different batteries.
Yes, it may be worth a try but flashing a custom ROM will trip knox and, if the vendor decides to take the phone back, tripping knox will inform the vendor that the phone has been flashed with non-official Samsung firmware.

Well if he could to take the phone back he probably would do that already, but it looks like he can't or he doesn't want to.
Probably there is no warranty on it anyway.
My advice according to what "audit13" said... take it back ASAP if you can of course.
---------- Post added at 07:21 PM ---------- Previous post was at 07:16 PM ----------
Ahhsan said:
yes, which rom should I flash ?
Click to expand...
Click to collapse
You have to choose what you want :
1.kit kat rom
2.Lollipop rom
3.marchmallow
Then let us know so we can assist you with flashing
---------- Post added at 07:32 PM ---------- Previous post was at 07:21 PM ----------
asadnow2k said:
flash with odin stock firmware mate.
Click to expand...
Click to collapse
That's a good advice as well, if you fancy with a stock rom.

here its a link to find repair firmware
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
including pit files in it

[TOOL][X52X] TOOL ALL IN ONE (Drivers|Unlock|TWRP|Factory Image|Stock Recovery)

This is the LeEco X52X's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
​

OP is really too confusing. I suggest you to remove other devices info and just talk about Le 2 as that would make it less confusing and more convenient.
Edit : Also, you've added changelog twice.
Edit 2 : It's a bug in Xda Labs app. Nothing wrong in OP (ugh)

Looks promising! Keep up the great work!
Just a little note aside: you should change "No devices founded" to "No devices found".

Great job!

xdvs23 said:
Looks promising! Keep up the great work!
Just a little note aside: you should change "No devices founded" to "No devices found".
Click to expand...
Click to collapse
Already done, that is an old screen
Anwar Syed said:
OP is really too confusing. I suggest you to remove other devices info and just talk about Le 2 as that would make it less confusing and more convenient.
Edit : Also, you've added changelog twice.
Click to expand...
Click to collapse
I will not remove other devices info because the devices are a lot and i cant create too different threads. The procedure are the same for all devices. Where i have added changelog twice?

mauronofrio said:
I will not remove other devices info because the devices are a lot and i cant create too different threads. The procedure are the same for all devices. Where i have added changelog twice?
Click to expand...
Click to collapse
Okay now this is embarrassing. When I look at your post via Xda Labs app, it looks pretty unorganized and has changelogs twice and makes it look confusing, while the same thing looks much more organized when I go through it using chrome or any browser. So it's probably a bug on Xda Labs app. Sorry. Cheers.

its connecting my device x526 very well in Windows 10 . But when i click on bootloader status its rebooting my device in flash mode and after getting this mode in device , its not recognize my device .
plz fix

Pkb2003 said:
its connecting my device x526 very well in Windows 10 . But when i click on bootloader status its rebooting my device in flash mode and after getting this mode in device , its not recognize my device .
plz fix
Click to expand...
Click to collapse
Did u turn on usb debugging in developer options
---------- Post added at 04:14 PM ---------- Previous post was at 04:14 PM ----------
hkee96 said:
Did u turn on usb debugging in developer options
Click to expand...
Click to collapse
And also oem unlocking

hkee96 said:
Did u turn on usb debugging in developer options
---------- Post added at 04:14 PM ---------- Previous post was at 04:14 PM ----------
And also oem unlocking
Click to expand...
Click to collapse
offcource both done bro

Pkb2003 said:
offcource both done bro
Click to expand...
Click to collapse
mmm, you are the first, maybe you have not installed the drivers? Have you "unblock" the tool zip before unpack and install it?

mauronofrio said:
mmm, you are the first, maybe you have not installed the drivers? Have you "unblock" the tool zip before unpack and install it?
Click to expand...
Click to collapse
yes bro
i first unzipped then install

Pkb2003 said:
yes bro
i first unzipped then install
Click to expand...
Click to collapse
before unzip, have you unblocked the zip from properties?

mauronofrio said:
before unzip, have you unblocked the zip from properties?
Click to expand...
Click to collapse
didnt get this point bro
how do this

Pkb2003 said:
didnt get this point bro
how do this
Click to expand...
Click to collapse
See first post, section "how to install"

Pkb2003 said:
didnt get this point bro
how do this
Click to expand...
Click to collapse
In your computer, go to the properties of zip and click unblock

Now is available a new fastboot rom for LeEco X52X
https://mega.nz/#F!pN0F2YKZ!ma3isb6MocKgRDpbkY5qGA

mauronofrio said:
Now is available a new fastboot rom for LeEco X52X
https://mega.nz/#F!pN0F2YKZ!ma3isb6MocKgRDpbkY5qGA
Click to expand...
Click to collapse
Hi Mauro
is this the Chinese stock we have seen in the other Forum section or a new one?
any particular feature?
thanks

nfraccar said:
Hi Mauro
is this the Chinese stock we have seen in the other Forum section or a new one?
any particular feature?
thanks
Click to expand...
Click to collapse
Yes, this is 26s chinese stock rom, this is a fastboot rom, flashable through tool.

Any sugestion for this, its really to much. Is there anything to solve this battery problem or it is only new ROM for this?

SrdjanM said:
Any sugestion for this, its really to much. Is there anything to solve this battery problem or it is only new ROM for this?
Click to expand...
Click to collapse
This is not a rom support thread

[GUIDE] Remove unlocked bootloader warning

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
^- We are talking about this annoying warning
Someone asked for that on this forum, someone told this is impossible - so I did that.
It replaces aboot with the one that doesn't display this annoying warning, enjoy
Download flashable zip
Flash it
Enjoy!
Download: https://androidfilehost.com/?fid=4349826312261750148
Donation URL: https://ko-fi.com/kazigk
Proof that it does work: https://www.youtube.com/watch?v=y2BFxurx7b8

This is wonderful, great work bro

I suggest to be carefull with this zip - it hard bricked my device (twrp or system was not able to boot, I had to revert the system to stock Android through fastboot, then install back custom rom)
Finally it was my decision. I take responsibility.
Best regards,
Bartłomiej.

Worked for me too

Work like a charm, i juste replace both abl_a and abl_b file in dev/block/bootdevice/by-name/ with your file and set permission to 777
Thanks a lots

kazigk said:
^- We are talking about this annoying warning
Someone asked for that on this forum, someone told this is impossible - so I did that.
It replaces aboot with the one that doesn't display this annoying warning, enjoy
Download flashable zip
Flash it
Enjoy!
Download: https://androidfilehost.com/?fid=4349826312261750148
Donation URL: https://ko-fi.com/kazigk
Proof that it does work:
Click to expand...
Click to collapse
Will this brick your phone if you are using a custom rom? Or do you have to be using stock Android?

juanappleseed said:
Will this brick your phone if you are using a custom rom? Or do you have to be using stock Android?
Click to expand...
Click to collapse
In newest Firmware the Warning ist removed

d3rt0xx said:
In newest Firmware the Warning ist removed
Click to expand...
Click to collapse
You mean the latest Android? I have that installed and still have the warning

How to install manual i don't have custom recovery

is this work on mi 6x , my device is converted a2 to mi 6x.

xhacker said:
Work like a charm, i juste replace both abl_a and abl_b file in dev/block/bootdevice/by-name/ with your file and set permission to 777
Thanks a lots
Click to expand...
Click to collapse
would it work with op6 and can u give some screenshots for the process

Will this work only on mi a2 or any stock android phone?

please re-upload the file, it says "no mirrors found" when trying to DL

Got an error("the zip file is for wayne devices only") when flashed, I am using Nokia 7 plus with derpfest custom rom would be helpful if there's a B2N sprout flash file coz that is what was suggested to download when I got error.

xhacker said:
Work like a charm, i juste replace both abl_a and abl_b file in dev/block/bootdevice/by-name/ with your file and set permission to 777
Thanks a lots
Click to expand...
Click to collapse
Can you help me work on this I'm having some issues that this is for Wayne device

ᏰᏋᏒᏕᏋᏒᏦᏋᏒ said:
Got an error("the zip file is for wayne devices only") when flashed, I am using Nokia 7 plus with derpfest custom rom would be helpful if there's a B2N sprout flash file coz that is what was suggested to download when I got error.
Click to expand...
Click to collapse
same here

daryl02061988 said:
same here
Click to expand...
Click to collapse
Use a custom ROM, that's the only option for us.

Hello.. please suggest any solution for removing unlocked bootloader icon during booting in my redmi note 9 pro mobile..

same here if anyone can help removing this start-up screen from a Lenovo Legion duel 2, screen resolution is 1080 x 2460, cheers guys

rdsmart said:
Hello.. please suggest any solution for removing unlocked bootloader icon during booting in my redmi note 9 pro mobile..
Click to expand...
Click to collapse
Wrong thread