Got error code 8 in twrp when trying to flash rom - ZTE Axon 7 Questions & Answers

Hey i was formmated system accidintly in twrp recovery (i am was not backup my data before..soo idiot ) now when i trying to flash rom i get error 8 or something else like courrupted zip file..see image below.. how i can install stock rom in that way?
(I renamed the zip to cme its the original rom)
Thanks for helpers

Which devic? A2017U?
The message says that the assert failed. It seems that your ro.product.name isn't P996A03
Which image did you use?

Keiler90 said:
Which devic? A2017U?
The message says that the assert failed. It seems that your ro.product.name isn't P996A03
Which image did you use?
Click to expand...
Click to collapse
I use image b09 i have zte A2017 chinnese
I download the rom from zte site
What this error said? I dont found that someone have this error in google

danielad200 said:
I use image b09 i have zte A2017 chinnese
I download it from zte site
Click to expand...
Click to collapse
Try redownloading it and see if it works then. Is it the full ota zip? (I don't know about those for Chinese model)

keessonnema said:
Try redownloading it and see if it works then. Is it the full ota zip? (I don't know about those for Chinese model)
Click to expand...
Click to collapse
Its the full ota zip..its 2.47GB zip file..i tried to redownload but no succses its the same error

u can temprarily flash the stock recovery. from there u are able to flash the stock rom and go back to TWRP recovery

Guido83 said:
u can temprarily flash the stock recovery. from there u are able to flash the stock rom and go back to TWRP recovery
Click to expand...
Click to collapse
When i flash from stock recovery there is a message "cannot update from sd card"
Because its an OTA update?

When i connect phone at mtp in TWRP computer show my device as A2017U maybe this is the cause of the problem?
Please someone help me

Same issue.(oxygen)

Related

can´t flash any rom, help

hi, hi have unlocked bootloader, original 5.0.1 rom, rooted but i cant flash any rom in recovery
it always show error
can yuo guys please help me where is the problem
i tryied with 2 direrent roms
here´s a picture of the problem
http://postimg.org/image/4d6vik455/full/
eheheh said:
hi, hi have unlocked bootloader, original 5.0.1 rom, rooted but i cant flash any rom in recovery
it always show error
can yuo guys please help me where is the problem
i tryied with 2 direrent roms
here´s a picture of the problem
http://postimg.org/image/4d6vik455/full/
Click to expand...
Click to collapse
i would suggest to redownload the zip file and try again. maybe the zip is corrupted or something. try downloading from pc, i used to have corrupted zips sometimes when i was downloading big zip from nexus 4.
now that i saw the picture again the problem probably is that the zip you downloaded has a problem with the updater script. every zip has a script so the recovery knows what to do. try another rom or check if the rom version ytou downloaded is for nexus 4 and not for another phone
i don´t understand...
i try 2 diferent roms, and they are both for nexus 4...
i try pass the roms by usb cable
and try to download them in the phonefor both i ahve the same errors
any help??
installed recovery with toolkit1.9.9
recovery installed is twrp 2.8.2.0
always error:
error executing updater binary in zip /sdcard
helppp
eheheh said:
installed recovery with toolkit1.9.9
recovery installed is twrp 2.8.2.0
always error:
error executing updater binary in zip /sdcard
helppp
Click to expand...
Click to collapse
User twrp 2.8.1.0
Sent from my Nexus 9 using XDA Free mobile app
installed clockworkmod 6.0.4.7 iver twrp via toolkit 1.9.9
still the same problem....
anyone had this problem??
whan is going wrong??
how can i unstall trwp 2.8.1.0, but i guess that isnt going to solve my problem???
thanks
eheheh said:
installed clockworkmod 6.0.4.7 iver twrp via toolkit 1.9.9
still the same problem....
anyone had this problem??
whan is going wrong??
how can i unstall trwp 2.8.1.0, but i guess that isnt going to solve my problem???
thanks
Click to expand...
Click to collapse
Lose the too kit and if your rooted flash the 2.8.1.0 image file in flashify. You can get it from the play store. You can get the image from here http://techerrata.com/browse/twrp2/mako
Sent from my Nexus 9 using XDA Free mobile app
same problem

[Guide] Flash OTAs with TWRP (OS 2.1.3/ 005)

Firstly, you cannot install OTA's with TWRP. You'll have to get back to stock recovery in order to install patches.
Thanks to @eng.stk, with the recovery compiled from source, we now can flash OTA Zips from TWRP.
Download TWRP 2.8.7.0: http://forum.xda-developers.com/devdb/project/dl/?id=15364
Download the following OTA's and move them to internal/external storage and proceed to install them from TWRP.
OxygenOS_X_Rom.zip (003)
OTA Patch 003-004.zip
OTA Patch 004-005.zip (Uploaded by @Razertje)
____
Stock Recovery (Just in case if someone requires it)
- Stock_Recovery.img
I got an error when I try to flash it
PoloB49 said:
I got an error when I try to flash it
Click to expand...
Click to collapse
Are you rooted? Did you flash TWRP recovery?
PoloB49 said:
I got an error when I try to flash it
Click to expand...
Click to collapse
It's most likely that you tampered the system and recovery partition. I uploaded the stock recovery here, flash the stock recovery, then flash to system dump, then this patch.
Well, i did a nandroid backup before getting rooted, i tried to restore my phone so i could properly do the ota, but now there is no OS installed
But my computer still detect my phone, where can i download the full rom please ?
PoloB49 said:
Well, i did a nandroid backup before getting rooted, i tried to restore my phone so i could properly do the ota, but now there is no OS installed
But my computer still detect my phone, where can i download the full rom please ?
Click to expand...
Click to collapse
It's at the front page. http://forum.xda-developers.com/oneplus-x/general/ota003all20151024193-oxygenos-ota-dump-t3244996
SpiritBreak3r said:
It's at the front page. http://forum.xda-developers.com/oneplus-x/general/ota003all20151024193-oxygenos-ota-dump-t3244996
Click to expand...
Click to collapse
Thanks, i wasn't sure it was the full rom because of the "ota" in the name.
SpiritBreak3r said:
It's most likely that you tampered the system and recovery partition. I uploaded the stock recovery here, flash the stock recovery, then flash to system dump, then this patch.
Click to expand...
Click to collapse
hey i did as you said to try and get the update but i have a question. what does flash to system dump mean?
Already flashed stock recovery. next step?
Savya said:
hey i did as you said to try and get the update but i have a question. what does flash to system dump mean?
Already flashed stock recovery. next step?
Click to expand...
Click to collapse
By flashing the system dump I meant, install this zip package http://forum.xda-developers.com/oneplus-x/general/ota003all20151024193-oxygenos-ota-dump-t3244996. This zip package is stock system dump bearing version 03. Then flash to 03-04 patch.
is this OTA solved the problem with microsd cards?
Can anybody help with a generic error trying to flash the stock recovery again?
No reason why just says failed. I am rooted with TWRP and trying to revert to stock to be able to OTA. Last android was a nexus 4 and been away a little while so I may be missing something.. I don't want to have to wipe all my data and such can somebody assist and refresh my understanding?
Dizzyrul3z: No, microSD card issue remains according to official forum--next OTA I bet.
I'm rooted, TWRP also errored when I attempted the OTA installed.
So to clarify, using TWRP I want to install three zips: stock rom, OTA03 (system dump), and OTA04 (update), wipe cache/dalvik. Correct?
Question: I install them all at once in TWRP, right? Will any of this erase my apps/data?
Thanks,
Dizzyrul3z said:
is this OTA solved the problem with microsd cards?
Click to expand...
Click to collapse
I don't know about you guys, but I have the E-1003 model, SD card is working fine. I have a Samsung EVO+ 32GB card.
BakedGoodsX said:
Dizzyrul3z: No, microSD card issue remains according to official forum--next OTA I bet.
I'm rooted, TWRP also errored when I attempted the OTA installed.
So to clarify, using TWRP I want to install three zips: stock rom, OTA03 (system dump), and OTA04 (update), wipe cache/dalvik. Correct?
Question: I install them all at once in TWRP, right? Will any of this erase my apps/data?
Thanks,
Click to expand...
Click to collapse
You need to flash to Stock recovery as well. I'll be updating the OP.
So this update is newer than the one mentioned here right ? : https://forums.oneplus.net/threads/oxygenos-2-1-2-will-start-roll-out-to-oneplus-x-today.402637/
Thanks
SpiritBreak3r said:
Just received this OTA mins ago.
Size: 17MB
https://drive.google.com/file/d/0B3AIip-hiOnNb1pBeGNlcUIyYmc/view?usp=sharing
Instructions:
1. Switch to Stock Recovery if you're running TWRP. But how to do it? Restore this backup from TWRP.
2. Flash the system dump available at this thread.
3. Now flash this update/patch.
4. Then fastboot flash TWRP recovery if you only need it.
Just my 2 cents, boot TWRP instead of flashing it. I personally suggest.
Code:
fastboot boot twrp_directory_of_your_pc.img
PSA: You'll need Stock recovery to patch official updates.
PS: My Memory Card is working exceptionally fine. I am using a Samsung EVO+ 32GB.
Click to expand...
Click to collapse
I can't restore the stock recovery.
in TWRP:
error flashing zip '/sdcard/*/oneplusx_x_stock_recovery.zip'
I also copied the zip into the TWRP backup folder, but can't select it to restore.
TWRP ist v.2.8.7.0
What am I doing wrong?
...rebooting the device from TWRP is also not working, anybody with the same problem?
umpalumpa1799 said:
I can't restore the stock recovery.
in TWRP:
error flashing zip '/sdcard/*/oneplusx_x_stock_recovery.zip'
I also copied the zip into the TWRP backup folder, but can't select it to restore.
TWRP ist v.2.8.7.0
What am I doing wrong?
...rebooting the device from TWRP is also not working, anybody with the same problem?
Click to expand...
Click to collapse
Extract the recovery.img from the zip file and flash it from fastboot:
Code:
fastboot flash recovery recovery.img
CafeKampuchia said:
Extract the recovery.img from the zip file and flash it from fastboot:
Code:
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
so rename the recovery.emmc.win from the zip file to recovery.img and flash it with fastboot.
umpalumpa1799 said:
so rename the recovery.emmc.win from the zip file to recovery.img and flash it with fastboot.
Click to expand...
Click to collapse
even better, download the img from the op.
SpiritBreak3r said:
even better, download the img from the op.
Click to expand...
Click to collapse
my fault, I downloaded the stock recovery from a nother post
Thank you for the update OP.
To clarify, when you say '...stick with stock recovery, disable the apps instead of deleting them...' what exactly does that mean?

A2017 flashed A2017U B29 failed to update to Nougat

I download the packacke via OTA and restart device. Then it boots to TWRP. I have to reboot device again and it goes back 6.0.1 with failed update notification. My deivice is unroot and still lock bootloader. Is there anyone having the same issue with me? And possible way to fix?
Thanks
Thalias said:
I download the packacke via OTA and restart device. Then it boots to TWRP. I have to reboot device again and it goes back 6.0.1 with failed update notification. My deivice is unroot and still lock bootloader. Is there anyone having the same issue with me? And possible way to fix?
Thanks
Click to expand...
Click to collapse
You have to restore stock B29 recovery. You can't accept an OTA with TWRP.
bkores said:
You have to restore stock B29 recovery. You can't accept an OTA with TWRP.
Click to expand...
Click to collapse
Thanks. I am downloading again. Hope it works this time.
bkores said:
You have to restore stock B29 recovery. You can't accept an OTA with TWRP.
Click to expand...
Click to collapse
It still fails. After restarting device it boots into installing screen with miFavor logo instead of TWRP. The processing bar runs to about 24% then stops to reboot. I notice that the log at bottom screen say mismatch. And I got message system update package does not match the phone.
Thalias said:
It still fails. After restarting device it boots into installing screen with miFavor logo instead of TWRP. The processing bar runs to about 24% then stops to reboot. I notice that the log at bottom screen say mismatch. And I got message system update package does not match the phone.
Click to expand...
Click to collapse
You modified /system . You should probably flash official b29 firmware from ZTE and then update to nougat
Teet1 said:
You modified /system . You should probably flash official b29 firmware from ZTE and then update to nougat
Click to expand...
Click to collapse
I got b29 from zte website. Can I install it with stock recovery?
Thalias said:
Is there a link to download it?
Click to expand...
Click to collapse
https://www.zteusa.com/axon-7
Go under Support<Software Updates.
bkores said:
https://www.zteusa.com/axon-7
Go under Support<Software Updates.
Click to expand...
Click to collapse
Can I install it with stock recovery?
Thalias said:
Can I install it with stock recovery?
Click to expand...
Click to collapse
You have to install it in stock recovery. Put it on your FAT32 sdcard and then in stock recovery select "Apply update from sdcard".
bkores said:
You have to install it in stock recovery. Put it on your FAT32 sdcard and then in stock recovery select "Apply update from sdcard".
Click to expand...
Click to collapse
I got following message at bottom left of screen
Supported API: 3
Sorry, you can't sd upgrade
I think you have to enable OEM unlock in developer options, first. Then, you can install B29 via SDCard.
MiMtnBiker said:
I think you have to enable OEM unlock in developer options, first. Then, you can install B29 via SDCard.
Click to expand...
Click to collapse
Thanks. I forgot to unzip the file and put it in the root of sd card and I have done what you said too. It is running installation now.
I'm failing now? I went from ZAD v.3 back to stock B29 (I have an unlocked bootloader). I do have the MiFavor recovery (not TWRP)
I got the notification there was an upgrade, it took 6 hours to download... but the update "failed". I tried applying the update via SD card, but I get about 32% in and says "Update failed"......It also lists "Status 8" and "system partition has unexpected contents".
Sounds like y'all are having a hell of a time between the slow OTA speeds and then getting it to actually flash.
So I think I'll hold off for now. Hopefully we can get some TWRP-flashable zips soon enough... I think DrakenFX is already busy with all that
You guys are making this way too complicated.
The full B29 firmware will flash just fine with twrp.
Only OTA *updates* require the stock recovery. The difference is the update patches existing files while the full firmware contains full partition images.
Be aware if you download the full b29 firmware from zte, it will also replace your recovery and bootloader. You won't be able to flash recovery from the bootloader/fastboot screen then. Also, it wipes all your data.
DrakenFX put out a modified version of the full firmware file which doesn't modify the bootloader. I believe it also leaves the recovery intact.
After flashing official A2017U B29 firmware from ZTE the signal network service is lost. I ignore this and continue to upgrade to Nougat successfully and I get lost signal. I notice that Dual Sim Setting is working. Does official firmware overwrite original chinese baseband/bootstack? Can someone please upload chinese baseband/bootstack A2017 please?
gpz1100 said:
You guys are making this way too complicated.
The full B29 firmware will flash just fine with twrp.
Only OTA *updates* require the stock recovery. The difference is the update patches existing files while the full firmware contains full partition images.
Be aware if you download the full b29 firmware from zte, it will also replace your recovery and bootloader. You won't be able to flash recovery from the bootloader/fastboot screen then. Also, it wipes all your data.
DrakenFX put out a modified version of the full firmware file which doesn't modify the bootloader. I believe it also leaves the recovery intact.
Click to expand...
Click to collapse
No more complicated than it's turned out to be....
I followed DrakenFX's guide to B29 stock... The Nougat OTA downloaded, in 6 hours, but failed. So, I tried the SD card method, and it also failed at 32%.
Not sure what else I can do? Just wait for DrakenFX to make ZAD v.4 is my plan for now since I already wasted about 11 hours trying to upgrade today, and another 3 restoring back 6.0.1 and all my apps.
tele_jas said:
No more complicated than it's turned out to be....
I followed DrakenFX's guide to B29 stock... The Nougat OTA downloaded, in 6 hours, but failed. So, I tried the SD card method, and it also failed at 32%.
Not sure what else I can do? Just wait for DrakenFX to make ZAD v.4 is my plan for now since I already wasted about 11 hours trying to upgrade today, and another 3 restoring back 6.0.1 and all my apps.
Click to expand...
Click to collapse
No problem upgrading using the OTA on an sdcard here. Flashed the draken stock_system zip, then fastboot flashed the B29 stock recovery. Reboot to recovery (which is now stock) and update from sd card. If you've messed with other partitions, you may need to flash more B29 .img's.
Thalias said:
After flashing official A2017U B29 firmware from ZTE the signal network service is lost. I ignore this and continue to upgrade to Nougat successfully and I get lost signal. I notice that Dual Sim Setting is working. Does official firmware overwrite original chinese baseband/bootstack? Can someone please upload chinese baseband/bootstack A2017 please?
Click to expand...
Click to collapse
hey why you flashed us version firmware on chinise version?
i have aslo chinise version of the phone with b09G firmware im afraid loose signal too
yosef019 said:
hey why you flashed us version firmware on chinise version?
i have aslo chinise version of the phone with b09G firmware im afraid loose signal too
Click to expand...
Click to collapse
I don't know Chinese so I prefer Eng community with support and US region always get latest update first.

Update Failed WAS-LX1

Hello,
today i wanted to update my *rooted* WAS-LX1 to B182, so i downloaded the update.zip and tried to flash it with FlashFire.
Then my phone booted in Error Mode. So i tried to boot in Fastboot mode, and it worked. So i flashed TWRP and now i want to install Stock firmware again, but i don't know which file i should flash. I've got 3 files called update.zip, update_data_full_public.zip and update_full_WASL21A_hw_eu.zip.
I hope you can help me.
Zillinda
Zillinda said:
Hello,
today i wanted to update my *rooted* WAS-LX1 to B182, so i downloaded the update.zip and tried to flash it with FlashFire.
Then my phone booted in Error Mode. So i tried to boot in Fastboot mode, and it worked. So i flashed TWRP and now i want to install Stock firmware again, but i don't know which file i should flash. I've got 3 files called update.zip, update_data_full_public.zip and update_full_WASL21A_hw_eu.zip.
I hope you can help me.
Zillinda
Click to expand...
Click to collapse
To update my rooted phone to B182 I had to download the full package (2.3gb, including update.zip and update_full_WASL21A_hw_eu.zip). I was not successfull in updating via TWRP. I updated via the official system menu so I don't know how exactly it was applied. According to other guides (http://www.stechguide.com/tag/was-lx1c432b182/ for example) it should be update.zip first and update_full_WASL21A_hw_eu.zip second, without a reboot. Let us know how it worked out...
garris_bibop said:
To update my rooted phone to B182 I had to download the full package (2.3gb, including update.zip and update_full_WASL21A_hw_eu.zip). I was not successfull in updating via TWRP. I updated via the official system menu so I don't know how exactly it was applied. According to other guides (http://www.stechguide.com/tag/was-lx1c432b182/ for example) it should be update.zip first and update_full_WASL21A_hw_eu.zip second, without a reboot. Let us know how it worked out...
Click to expand...
Click to collapse
Unfortunately it didn't work. The only thing i can do is boot in the TWRP recovery. Is there a way to flash the stock rom with fastboot?
Zillinda said:
Unfortunately it didn't work. The only thing i can do is boot in the TWRP recovery. Is there a way to flash the stock rom with fastboot?
Click to expand...
Click to collapse
I only tried flashing the update via sideload and recovery and it didn't work (http://rootmygalaxy.net/flash-ota-firmware-updates-using-adb-fastboot-commands/). Maybe you are lucky. Problem is, I'm quite new to this stuff, hopefully someone else can help out.
Can someone please provide us with a link for the stock recovery?
kazzot17 said:
Can someone please provide us with a link for the stock recovery?
Click to expand...
Click to collapse
https://mega.nz/#!V3AwUI6K!mcqlNCwcyE71MroUZuP9w-bNDhgt3MGzz0svgHUY8Ow
By the way, i solved the problem. I downloaded HuaweiUpdateExtractor for extracting the .img files from the update.app and i flashed them with fastboot.
Nice, congrats

TWRP Error installing zip file

Hello,
I got the error " error installing zip file " while a try to flash oos 11.1.2.2.
I try sideload instead by it Failed instantly. I tried to format data and wipe without any change. I also tried to boot other version of TWRP (I currently use a custom version of TWRP 3.6.0), but I always got a Crash Dump error.
I was able to install rom with this version of TWRP before and I have wanted to install PixelExperience but I have forgotten to flash oos 11.1.2.2 before and i think is that witch broken TWRP.
I also tried to reinstall TWRP.
Any ideas on this?
wiiznokes2 said:
Hello,
I got the error " error installing zip file " while a try to flash oos 11.1.2.2.
I try sideload instead by it Failed instantly. I tried to format data and wipe without any change. I also tried to boot other version of TWRP (I currently use a custom version of TWRP 3.6.0), but I always got a Crash Dump error.
I was able to install rom with this version of TWRP before and I have wanted to install PixelExperience but I have forgotten to flash oos 11.1.2.2 before and i think is that witch broken TWRP.
I also tried to reinstall TWRP.
Any ideas on this?
Click to expand...
Click to collapse
I had that error before from a bad copy of oos. I would download it again and copy to USB again if that's what you're using. Also use this twrp to fastboot boot it works I actually just had to do it a min ago.
Brettroth said:
I had that error before from a bad copy of oos. I would download it again and copy to USB again if that's what you're using. Also use this twrp to fastboot boot it works I actually just had to do it a min ago.
Click to expand...
Click to collapse
Thank you, I will try that. Can you send me a link of oos that I should install, I'm not sure if it's that one https://www.oneplus.com/fr/support/softwareupgrade/details?code=PM1574156215016 .
Also, shoud I use "flash current TWRP" before flashing the ROM?
wiiznokes2 said:
Thank you, I will try that. Can you send me a link of oos that I should install, I'm not sure if it's that one https://www.oneplus.com/fr/support/softwareupgrade/details?code=PM1574156215016 .
Also, shoud I use "flash current TWRP" before flashing the ROM?
Click to expand...
Click to collapse
Yeah definitely flash current twrp first. The oos you used is not the latest I'll just upload it. The latest and last ever update from OnePlus is 11.1.2.2
Brettroth said:
Yeah definitely flash current twrp first. The oos you used is not the latest I'll just upload it. The latest and last ever update from OnePlus is 11.1.2.2
Click to expand...
Click to collapse
That worked, thank a lot!
wiiznokes2 said:
That worked, thank a lot!
Click to expand...
Click to collapse
You're welcome

Categories

Resources