Database Users

Screwed my phone

Hello,
I'm in the UK and last night I got an OTA update for my S4, turns out it was for Lollipop 5.0.1 from kitkat (cant recall exactly which). The update appeared to go fine but after I noticed that the back button and the other touch button didn't work or light up (straight after the update).
After panicking and stupidly trying things on the internet, I tried to install kitkat using Odin, following a different example someone else used (cant find it now) but that failed and now I have (foolishly) soft bricked the phone (I hope, anyway).
When I try turning it on, I get a message telling me to use kies to recover the software but neither Kies or Kies3 recognise it. Kies just constantly tried to load it and Kies3 tells me it isn't compatible. Neither list it for emergency restore.
Odin doesn't seem to work with any .tar files. Some fail early, some fail near the end.
I can send a picture of a screenshot of a failed odin for a 4.4 Kitkat flash.
Any help is very much appreciated. Thank you.

With the error you're apparently having, the .tar.md5 file should be in the BL/Bootloader slot in Odin. Then flash. Placing the file in BL should rewrite the bootloader and thus fix the corruption issue caused by your panic attack.
If the firmware is already located in BL, then check your cables and your other connections. Also, do not plug the phone in until AFTER you've entered download mode on it.

Here you have a Base ROM (HOH2) with 4files+PIT: https://mega.nz/#!cg0DWTIR!rQIPicJdKj16B4kqE5GT43HWvoUa32ny8ys5wAWJV3Q
Flash ur phone using each file on the right field of Odin (including the PIT) and with Re-Partition TICKED.

Strephon Alkhalikoi said:
With the error you're apparently having, the .tar.md5 file should be in the BL/Bootloader slot in Odin. Then flash. Placing the file in BL should rewrite the bootloader and thus fix the corruption issue caused by your panic attack.
If the firmware is already located in BL, then check your cables and your other connections. Also, do not plug the phone in until AFTER you've entered download mode on it.
Click to expand...
Click to collapse
As your reply was first and most simple, I tried this first and I've just looked at my phone. Android is optimizing apps!! Thank you.
oiluj said:
Here you have a Base ROM (HOH2) with 4files+PIT:
Flash ur phone using each file on the right field of Odin (including the PIT) and with Re-Partition TICKED.
Click to expand...
Click to collapse
Thank you.
Update : I'm on my phone now. I've put lollipop on but I still have the original problem which caused me to panic in the first place. My back button and other touch button aren't working which only appeared after I originally installed lollipop any ideas?
Thank you.

jamesteampro said:
Update : I'm on my phone now. I've put lollipop on but I still have the original problem which caused me to panic in the first place. My back button and other touch button aren't working which only appeared after I originally installed lollipop any ideas?
Click to expand...
Click to collapse
We're talking about that on http://forum.xda-developers.com/galaxy-s4/help/problems-official-update-signal-soft-t3250132

oiluj said:
We're talking about that on http://forum.xda-developers.com/galaxy-s4/help/problems-official-update-signal-soft-t3250132
Click to expand...
Click to collapse
I have just seen that, thank you. I shall follow closely, assuming Samsung don't release a fix. Until then I have downloaded a floating set of home, menu and back buttons.
Cheers.

jamesteampro said:
I have just seen that, thank you. I shall follow closely, assuming Samsung don't release a fix. Until then I have downloaded a floating set of home, menu and back buttons.
Click to expand...
Click to collapse
U don't have to download an app. The phone has already an option for those buttons on screen. It is under Accesibility menu.

oiluj said:
U don't have to download an app. The phone has already an option for those buttons on screen. It is under Accesibility menu.
Click to expand...
Click to collapse
I read it was but was unable to find it.

jamesteampro said:
I read it was but was unable to find it.
Click to expand...
Click to collapse
It's called something like "assistant menu" or similar, under the Accesibility options

oiluj said:
It's called something like "assistant menu" or similar, under the Accesibility options
Click to expand...
Click to collapse
Thank you, found it now. Not an instantly obvious one name imo.

Samsung Galaxy A8 (A-800I) Stuck on Logo Screen with red Custom Binary blocked by FRP

Hello all!
First of all i want to thank this site (and the people behind it) that makes everything android possible.
I feel privileged to be a member of this forum specially on rough times like what i am facing right now.
I rooted my Galaxy A8-A800i the other day and everything went great. I followed the instructions that i found here. Unfortunately, yesterday i turned off the OEM Unlock on my phone. Now, as the thread title says it. it is stuck on the Logo Screen with the annoying " Custom Binary blocked by FRP Lock ". i read a guide that ashyx made and i felt stupid. I didn't know that turning the OEM Unlock will do that to my Phone.
Right now, I am digging deep on this forums to try and revive my phone that is currently in Brick state.
i am downloading a firmware from sammobile for my phone, the problem i have is... i don't know how to use it. I don't know much about my phone but I do want to learn a lot and i know that this is the right place. I would like to ask assistance on how to use the firmware that I am downloading right now, and also, can i make the Knox Counter go "0" again?
Thanks for everything guys. I highly appreciate everything i've learned here so far.

rissered said:
Hello all!
First of all i want to thank this site (and the people behind it) that makes everything android possible.
I feel privileged to be a member of this forum specially on rough times like what i am facing right now.
I rooted my Galaxy A8-A800i the other day and everything went great. I followed the instructions that i found here. Unfortunately, yesterday i turned off the OEM Unlock on my phone. Now, as the thread title says it. it is stuck on the Logo Screen with the annoying " Custom Binary blocked by FRP Lock ". i read a guide that ashyx made and i felt stupid. I didn't know that turning the OEM Unlock will do that to my Phone.
Right now, I am digging deep on this forums to try and revive my phone that is currently in Brick state.
i am downloading a firmware from sammobile for my phone, the problem i have is... i don't know how to use it. I don't know much about my phone but I do want to learn a lot and i know that this is the right place. I would like to ask assistance on how to use the firmware that I am downloading right now, and also, can i make the Knox Counter go "0" again?
Thanks for everything guys. I highly appreciate everything i've learned here so far.
Click to expand...
Click to collapse
you can try flashing the official firmware I hope it fixes your phone.
and knox cannot be reset to 0

nepalbiraj said:
you can try flashing the official firmware I hope it fixes your phone.
and knox cannot be reset to 0
Click to expand...
Click to collapse
Thank you!... i downloaded the stock firmware from sammobile. but whenever i extract it there's a rar message saying it is corrupted so i DLed a new one, it has the same result. I haven't tried using it to fix my phone but i will try right now. Ill give an update on how it goes.

Tried flashing the new firmware but Odin can't detect my phone. i have the latest Driver for SAMSUNG and i have the latest Odin. I tried restarting my phone and my computer several times but it still fails. i am really frustrated and our of options right now. Even if Odin detects my phone there's no guarantee that the stock firmware will be installed properly since it always shows corrupt when i extract it from zip

rissered said:
Tried flashing the new firmware but Odin can't detect my phone. i have the latest Driver for SAMSUNG and i have the latest Odin. I tried restarting my phone and my computer several times but it still fails. i am really frustrated and our of options right now. Even if Odin detects my phone there's no guarantee that the stock firmware will be installed properly since it always shows corrupt when i extract it from zip
Click to expand...
Click to collapse
Install the Samsung drivers first, reboot your pc.
Start odin in Admin mode then put your device in download mode, plug in the usb cable. Your device should be detected.
Don't try flashing a corrupt firmware, it will be rejected anyway as it will fail the md5 check.
I suggest you use a different browser to download.

@ashyx hey! thanks for all your help. my internet went offline while i was trying to respond to the other thread. my phone is now fixed with your help. Thank you so much! only took 3 mins for the while Odin flashing to complete

This issue is now FIXED

rissered said:
This issue is now FIXED
Click to expand...
Click to collapse
but how? I have installed official firmware and flashed via odin and it shows"success", but then it gets stuck in the samsung logo. please help

Note 4 Verizon failing to update to Marshmallow

Hello everyone
Please bear me with me for I am a dinosaur that grew up with Symbian phones, then was forced to use Windows phones and now recently converted to Android, therefore not an expert in this field.
Bought the Note 4 off ebay in UK. Mobile banking app and Android Pay say my phone is rooted however Root Checker says it isn't . I have tried to update to Marshmallow through ODIN but I get the FAIL Auth error every time I try...
In settings the phone shows up as N910F however it is a N910V ... I do need help to figure out the precise model though just to make sure I am installing the correct software.
Also, I am using a Lebara SIM card (partners with Vodafone) here in UK, not sure if that matters.
Would really appreciate if someone would have the patience to guide me how to install Marshmallow on my phone, I just want a clean one and no rooting. Tried different tutorials on the internet but none worked for me or I am surely doing something wrong.
Many thanks in advance!
Andy

Andyyy91 said:
Hello everyone
Please bear me with me for I am a dinosaur that grew up with Symbian phones, then was forced to use Windows phones and now recently converted to Android, therefore not an expert in this field.
Bought the Note 4 off ebay in UK. Mobile banking app and Android Pay say my phone is rooted however Root Checker says it isn't . I have tried to update to Marshmallow through ODIN but I get the FAIL Auth error every time I try...
In settings the phone shows up as N910F however it is a N910V ... I do need help to figure out the precise model though just to make sure I am installing the correct software.
Also, I am using a Lebara SIM card (partners with Vodafone) here in UK, not sure if that matters.
Would really appreciate if someone would have the patience to guide me how to install Marshmallow on my phone, I just want a clean one and no rooting. Tried different tutorials on the internet but none worked for me or I am surely doing something wrong.
Many thanks in advance!
Andy
Click to expand...
Click to collapse
Hi Andy I'm also in the UK with note 4. To find out the correct model you need to boot to download mode. Power off the phone, Hold volume down + home + power together. It will boot to download mode and from there it will show you the model.
Post your correct model here and I will post the firmware with the correct steps to flash.

Hi Callum
In download mode it says N910V

Andyyy91 said:
Hi Callum
In download mode it says N910V
Click to expand...
Click to collapse
Ahh you have the verizon varient.
https://www.sammobile.com/firmwares/download/117781/N910VVRS2CPL1_N910VVZW2CPL1_VZW/
Here is the stock marshmallow firmware for your device.
Download and unzip the firmware. Place it in odin in AP. In odin options enable auto reboot and uncheck repartition. Put phone in download mode, connect to pc and start.

Thanks for the firmware , that worked like a charm. Is it possible to install a non-Verizon version on this phone? One that does not have the Verizon preloaded apps?
Also, do you know anything about the Note 4 getting the Nougat update?

Andyyy91 said:
Thanks for the firmware , that worked like a charm. Is it possible to install a non-Verizon version on this phone? One that does not have the Verizon preloaded apps?
Also, do you know anything about the Note 4 getting the Nougat update?
Click to expand...
Click to collapse
You can only flash firmware for your device which is N910V. Which means unfortunately you can only flash verizon firmware. However you can root your phone and use titanium backup to remove the bloat.
As for the N update I have read and heard rumours that we will get it but I don't have my hopes up. Even though the Note 4 is 2 years old it's still a high end device. It hasn't been officially announced yet. Only been announced for s6/s7 and future releases

callumbr1 said:
Hi Andy I'm also in the UK with note 4. To find out the correct model you need to boot to download mode. Power off the phone, Hold volume down + home + power together. It will boot to download mode and from there it will show you the model.
Post your correct model here and I will post the firmware with the correct steps to flash.
Click to expand...
Click to collapse
Hello. I'm also having this problem with SM-N910C, care to help? Thanks.

J73 said:
Hello. I'm also having this problem with SM-N910C, care to help? Thanks.
Click to expand...
Click to collapse
What is the problem?

callumbr1 said:
What is the problem?
Click to expand...
Click to collapse
It fails to upgrade to Marshmallow.

J73 said:
It fails to upgrade to Marshmallow.
Click to expand...
Click to collapse
What region are you in?
Is your phone network locked?

callumbr1 said:
What region are you in?
Is your phone network locked?
Click to expand...
Click to collapse
I got it from UAE but I'm currently in the Philippines. I don't think it is network locked.

J73 said:
I got it from UAE but I'm currently in the Philippines. I don't think it is network locked.
Click to expand...
Click to collapse
https://www.sammobile.com/firmwares/download/117967/N910CXXS2DPL1_N910COJV2DPI1_XSG/
Download and flash this.
Are you familiar on how to flash with odin?

callumbr1 said:
https://www.sammobile.com/firmwares/download/117967/N910CXXS2DPL1_N910COJV2DPI1_XSG/
Download and flash this.
Are you familiar on how to flash with odin?
Click to expand...
Click to collapse
It's my first time right now.

J73 said:
It's my first time right now.
Click to expand...
Click to collapse
1st download the firmware.
Download odin, latest version is fine but I use v3.10.6
On phone settings go to about device, tap build number 7 times until developer options is there, go on developer options and enable USB debugging.
Plug phone to pc to make sure drivers are up to date.
Once firmware is downloaded unzip it.
Power off phone and put into download mode, vol down + home + power.
Open odin and click AP, insert the firmware. Odin options should be, re partition UNCHECKED, auto reboot checked, f reset time checked.
Plug phone into pc, in odin log it will say added with blue box saying com:3 or similar.
Press start and it will flash and reboot. The first boot can loop a few times or hang on the Samsung logo for a little while it's normal.
If it hangs for more than 15 minutes remove the battery for a few minutes then power on again and it will boot.
If you get any errors or are unsure let me know.

callumbr1 said:
1st download the firmware.
Download odin, latest version is fine but I use v3.10.6
On phone settings go to about device, tap build number 7 times until developer options is there, go on developer options and enable USB debugging.
Plug phone to pc to make sure drivers are up to date.
Once firmware is downloaded unzip it.
Power off phone and put into download mode, vol down + home + power.
Open odin and click AP, insert the firmware. Odin options should be, re partition UNCHECKED, auto reboot checked, f reset time checked.
Plug phone into pc, in odin log it will say added with blue box saying com:3 or similar.
Press start and it will flash and reboot. The first boot can loop a few times or hang on the Samsung logo for a little while it's normal.
If it hangs for more than 15 minutes remove the battery for a few minutes then power on again and it will boot.
If you get any errors or are unsure let me know.
Click to expand...
Click to collapse
Thank you! I'll keep you updated.

callumbr1 said:
1st download the firmware.
Download odin, latest version is fine but I use v3.10.6
On phone settings go to about device, tap build number 7 times until developer options is there, go on developer options and enable USB debugging.
Plug phone to pc to make sure drivers are up to date.
Once firmware is downloaded unzip it.
Power off phone and put into download mode, vol down + home + power.
Open odin and click AP, insert the firmware. Odin options should be, re partition UNCHECKED, auto reboot checked, f reset time checked.
Plug phone into pc, in odin log it will say added with blue box saying com:3 or similar.
Press start and it will flash and reboot. The first boot can loop a few times or hang on the Samsung logo for a little while it's normal.
If it hangs for more than 15 minutes remove the battery for a few minutes then power on again and it will boot.
If you get any errors or are unsure let me know.
Click to expand...
Click to collapse
It worked flawlessly! Thank you so much!

J73 said:
It worked flawlessly! Thank you so much!
Click to expand...
Click to collapse
Not a problem

Callum , thanks for all your help. Will keep my eyes on the update news, I'm curious the see if we will get it aswell

Andyyy91 said:
Callum , thanks for all your help. Will keep my eyes on the update news, I'm curious the see if we will get it aswell
Click to expand...
Click to collapse
If you see anything post it here to keep me updated

Will do

Galaxy S8 bricked - Stuck in boot loop after flashing twrp

Hey there everyone,
I wanted to root my s8 (sm-950f) and when I flashed twrp my phone initially got stuck in Samsung logo. After managing to shut it down I tried to go to recovery mode to wipe everything and perform a factory reset but I can not do it. All that happens is I get to s8 screen and it reads in red on top left of the screen "Only official released binaries are allowed to be flashed" and it keeps resetting itself. I can access download mode but that's it, I can't do anything else. Currently downloading a stock firmware to try and flash it but with the free downloads it's taking its time. Any help appreciated, I really want to unbrick my phone
note: It shows FRP and OEM lock to be off in download mode, i dont even know if i'll even be able to flash a new fw. Do I just have a very expensive brick in my hands now?

nekropok said:
Hey there everyone,
I wanted to root my s8 (sm-950f) and when I flashed twrp my phone initially got stuck in Samsung logo. After managing to shut it down I tried to go to recovery mode to wipe everything and perform a factory reset but I can not do it. All that happens is I get to s8 screen and it reads in red on top left of the screen "Only official released binaries are allowed to be flashed" and it keeps resetting itself. I can access download mode but that's it, I can't do anything else. Currently downloading a stock firmware to try and flash it but with the free downloads it's taking its time. Any help appreciated, I really want to unbrick my phone
Click to expand...
Click to collapse
This must be a international S8... Did you activate oem unlock in developer settings before flashing twrp
([emoji3590]09-09-18[emoji3590])

I'm not sure if it's international, it's most likely a Turkish version.
And yeah to your question

nekropok said:
I'm not sure if it's international, it's most likely a Turkish version.
And yeah to your question
Click to expand...
Click to collapse
But you know for a fact that there's a twrp version for your device.... Not good to do these expensive phones like that without officially having all the facts
([emoji3590]09-09-18[emoji3590])

Well it's too late for that now, I need actual solutions. I also tried smart switch - it doesn't recognize the phone

nekropok said:
Well it's too late for that now, I need actual solutions. I also tried smart switch - it doesn't recognize the phone
Click to expand...
Click to collapse
On the xda thread for your device there aren't no stock roms uploaded to Android host for fast download so you can flash in Odin and start the process of twrp again or just leave it alone you have a S8 it's good money
([emoji3590]09-09-18[emoji3590])

WHEW. Flashing a stock firmware seems to have fixed the issue. Mods can lock the thread.

nekropok said:
WHEW. Flashing a stock firmware seems to have fixed the issue. Mods can lock the thread.
Click to expand...
Click to collapse
You going to give up on twrp
([emoji3590]09-09-18[emoji3590])

I do want to root, but I don't want to approach it without knowing all my facts, do you have any suggestions for guides for Android 9.0?

nekropok said:
I do want to root, but I don't want to approach it without knowing all my facts, do you have any suggestions for guides for Android 9.0?
Click to expand...
Click to collapse
Just look in your device forum everything Is there however your device is a international cause it ends in with the F so twrp does work for your device..... You just need to find the specific one for your model once you have twrp you can install a android 9 custom rom
([emoji3590]09-09-18[emoji3590])

I had same issue as you and was pointed towards this thread may be of some use to you?
https://forum.xda-developers.com/sa...w-to/guide-root-install-twrp-samsung-t3747535

Problem on my S8
PoochyX said:
This must be a international S8... Did you activate oem unlock in developer settings before flashing twrp
([emoji3590]09-09-18[emoji3590])
Click to expand...
Click to collapse
Sorry but I have a serious problem. I have activated oem and debug usb on developer option, but I can't install TWRP. I have tried with odin, prince cosmy odin, odin patched but FAIL everywhere, please help me, I just want twrp and i want to install a custom rom. thanks in advance everyone. If is a problem answer me here, you can send me a pvt message. I tried it from 3 days with the same FAILS :_(

I had this problem too a year ago but wasn't able to reflash the official firmware, but when I went to Samsung they fixed it for free even though Knox was already tripped

FabiusMod said:
Sorry but I have a serious problem. I have activated oem and debug usb on developer option, but I can't install TWRP. I have tried with odin, prince cosmy odin, odin patched but FAIL everywhere, please help me, I just want twrp and i want to install a custom rom. thanks in advance everyone. If is a problem answer me here, you can send me a pvt message. I tried it from 3 days with the same FAILS :_(
Click to expand...
Click to collapse
are you able to flash the stock firmware on it and get it to boot without TWRP installed?

I am with a stock rom now, The device works fine.

bricked sm-t580

i have the T580 32GB of a friend here, that does not work at the moment (and maybe never again ) - the problem is that on startup it only gives this message in red letter :
could not do normal boot invalid kernel length
Click to expand...
Click to collapse
the only thing i can do is get into download mode - but i fail when i try to install a stock rom via odin - after NAND Write Start!! it times out and gives me a fail.
i already tried a 3 different odin versions and adroid 6.0, 7.0 and 8.01 Stock Rom for SM-T580 but no luck so far.
another problem is my friend does not know what the android version he was on before that hapend - and the tablet has Samsung FRP on.
maybe some of the experts here have an advice what i can try otherwise this tab a is really bricked - furthermore i wonder how this could happen as my friend swears he did not try to put twrp or anything else onto the tablet ....

Have you tried flashing TWRP using ODIN? (AP Slot)

i do not know if flashing twrp is a good idea as i do not know if oem unlock is enabled - and as it does not boot up i cannot switch it on in developer options

ilovebytes said:
i do not know if flashing twrp is a good idea as i do not know if oem unlock is enabled - and as it does not boot up i cannot switch it on in developer options
Click to expand...
Click to collapse
Wouldn't it simply fail if OEM unlocking was disabled? I don't know honestly. I'd try it if no other solutions come up.

ilovebytes said:
i have the T580 32GB of a friend here, that does not work at the moment (and maybe never again ) - the problem is that on startup it only gives this message in red letter :
the only thing i can do is get into download mode - but i fail when i try to install a stock rom via odin - after NAND Write Start!! it times out and gives me a fail.
i already tried a 3 different odin versions and adroid 6.0, 7.0 and 8.01 Stock Rom for SM-T580 but no luck so far.
another problem is my friend does not know what the android version he was on before that hapend - and the tablet has Samsung FRP on.
maybe some of the experts here have an advice what i can try otherwise this tab a is really bricked - furthermore i wonder how this could happen as my friend swears he did not try to put twrp or anything else onto the tablet ....
Click to expand...
Click to collapse
I think you are going about it wrong. Instead of booting to download mode, try booting to recovery mode via Home, Vol Up and Power and then selecting Factory Reset. This is always necessary before you can use download to flash a ROM via Odin and it might make using Odin unnecessary.

of course i tried to get into receovery mode but the problem is i can't - when i do home, vol up and power absolutely nothing happens, i only get into download mode
edit: i believe FRP is the Problem this prevents odin from writing the files to the tablet - as it allways times out with :
Complete(Write) operation failed.
Click to expand...
Click to collapse
what i do not really understand is why FRP does not let odin flash an original samsung firmware ?

[QUOTE what i do not really understand is why FRP does not let odin flash an original samsung firmware ?[/QUOTE]
This sounds more like a binary issue. I have reason to believe you are what's called an FRP Binary Lock. Recovery is usually inaccessable or re-routed and you cannot "seem" to use Odin3 but in fact you can. This issue you apparently are having sounds oddly like some issues I've had on these devices and is often a result of bad Rooting or invalid firmware being installed. This overloads the binaries and puts the device in a locked mode with symptoms of an inaccessible Recovery a difficult to use Odin3 or a bootloop. Most of the time I hear of a notification somewhere of an FRP lock. If this is the situation you are in here is a link to a page of mine that will give you the files to helpfully solve your issue. Let me know if that works or not.
https://forum.xda-developers.com/general/help/custom-binary-blocked-frp-lock-2019-t3979661

Casper Young said:
If this is the situation you are in here is a link to a page of mine that will give you the files to helpfully solve your issue. Let me know if that works or not.
https://forum.xda-developers.com/general/help/custom-binary-blocked-frp-lock-2019-t3979661
Click to expand...
Click to collapse
it sounds like i am in the same situation and i tried your files but it does not let me download them through odin - i also wrote you a pm maybe you find the time to answer me.
i really wonder how this could happen as my friend swears he did never try to flash anything onto the tab, and i really believe him as he absolutely knows nothing about flashing or where to get a firmware and not even how to get into dl mode ....

ilovebytes said:
it sounds like i am in the same situation and i tried your files but it does not let me download them through odin - i also wrote you a pm maybe you find the time to answer me.
i really wonder how this could happen as my friend swears he did never try to flash anything onto the tab, and i really believe him as he absolutely knows nothing about flashing or where to get a firmware and not even how to get into dl mode ....
Click to expand...
Click to collapse
The situation I was suspecting is a "Custom Binaries are Blocked by FRP Lock" to which you would have seen a notification of it in one of 4 ways. Your situation is somewhat similar because you cannot access Recovey and although Download Mode is accessable it appears useless. Your device is not Bricked. A bricked device is unusable in any way and these days most devices can be restored.
You do seem to be having some difficulties that are usually common with binary issues. You can in fact use Odin3 but how is the question. Usually one can flash in the Stock firmware and that returns the device to normal. When it becomes impossible to flash in stock firmware or anything else it seems, to my experiance has always been a Binary issue. I will provide a link to the 4File Official firmware. And instructions for you to properly use it for your needs.
SM-T580 Official Stock Firmware 4Files
https://drive.google.com/open?id=1zvhwUfSRW44V1ZwEsHLRvlh-T0M79ks9
I'll assume you know something about using Odin3. Unzip the file to your desktop. There are 4 files but you'll only use 3 of them. You can use the patched version of Odin3.13B or you can use Odin3.14. Place the files in their respective places. BL, and AP are easy enough to see where they go. Now there is a file labeled CSC and one labeled HOME CSC. You will only use one of them. The CSC file returns your app data to factory settings (it erases everything). The Home CSC file keeps the app data. So it's your choice which one you choose. These are Official Firmware Files so you should be able to flash them in. Should that not work for you my most likely answer would be that your binaries are the issue and that is why you can't as of yet use Odin sucessfully. Does Odin even try to initiate a flash then stalls or does it do nothing altogether?
There are two different Binary files for the SM-T580 that I have. I would suggest using the Binary 4 FRP first. f I recall correctly the Odin3.13B patched version was made for this. Place the file in the AP section and try flashing it. You should get a few gears on the screen turning if it applied, or maybe not. If that fails use the U4 Binary Unlock file. It is only after you flash in the binary files that you can then install the Stock Firmware. It is the overloaded binaries that prevent the use of Odin as you may be experiancing. I am also including the Knox cleaner in case you need to reset it.
SM-T580 Binary files:
Binary 4 FRP Unlock
https://drive.google.com/open?id=1iXrZR2E7m6Ai5InAw8u3lzeLhb3ThRo5
U4 Binaries. This is two files. Flash one at a time using the AP section. They are labeled 1rst or 2nd
1. https://drive.google.com/open?id=1rX_luP_0W4ygdloIr2Gr9TCSfqFyaTK-
2. https://drive.google.com/open?id=1xsw4GVYtNMJhiMXV2cR2jaJvToG_n6Pi
Knox Cleaner: Also flashed in using the AP section of Odin3
https://drive.google.com/open?id=1EolYe9auY9jslYSpSgHoon_YB00D2noV
Good Luck and let me know if this helps or not.

lewmur said:
I think you are going about it wrong. Instead of booting to download mode, try booting to recovery mode via Home, Vol Up and Power and then selecting Factory Reset. This is always necessary before you can use download to flash a ROM via Odin and it might make using Odin unnecessary.
Click to expand...
Click to collapse
Only if they could get into Recovery they may be able to reset it.
I have never once needed to go to Recovery to do "anything" before using Odin3 to flash.
The only time I've had to go there (repetedly) and reset was when trying to get past FRP Google Account Protection. Sometimes it takes out the page I want to get to and I need to reset it to get to it again. This is "not" always neccesary before flashing a ROM which rewrites the device programing.

sorry for double post

@Casper Young
thanks for your help so far, i am gonna try your suggestions on weekend when i have a bit more spare time - hope i can get the tab running again