Related
So I just used Odin3 v 1.85 and CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 to try and root my device but its stuck at the booting screen with " RECOVERY BOOTING... RECOVERY IS NOT SEANDROID ENFORCING Set Warranty BIt : Recovert"
I'm using an Australian, Telstra, SM-N9005. How do I get it to work again
143bubblepop said:
So I just used Odin3 v 1.85 and CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 to try and root my device but its stuck at the booting screen with " RECOVERY BOOTING... RECOVERY IS NOT SEANDROID ENFORCING Set Warranty BIt : Recovert"
I'm using an Australian, Telstra, SM-N9005. How do I get it to work again
Click to expand...
Click to collapse
Try flashing cwm by chenglu or philz. Both will give you root access as well. Either way you seem don't mind flagging knox to 0x1. Is your phone international n9005 and network unlocked?
I'm new to the rooting world
Rosli59564 said:
Try flashing cwm by chenglu or philz. Both will give you root access as well. Either way you seem don't mind flagging knox to 0x1. Is your phone international n9005 and network unlocked?
Click to expand...
Click to collapse
Yeah so I don't mind tripping knox, but I'm not sure how to do either of types steps.
Also, my device it's an international unlocked phone
143bubblepop said:
Yeah so I don't mind tripping knox, but I'm not sure how to do either of types steps.
Also, my device it's an international unlocked phone
Click to expand...
Click to collapse
Just the same as you did using cf auto root but you'll need this instead.
http://forum.xda-developers.com/showthread.php?t=2454079
Choose the one either jb or kk.
Did you turn off reactivation lock before trying to root?
Afraid that's the one causing your phone to hangup at the screen. Remove battery and turn on your phone if it can boot normally in OS
Rosli59564 said:
Just the same as you did using cf auto root but you'll need this instead.
http://forum.xda-developers.com/showthread.php?t=2454079
Choose the one either jb or kk.
Did you turn off reactivation lock before trying to root?
Afraid that's the one causing your phone to hangup at the screen. Remove battery and turn on your phone if it can boot normally in OS
Click to expand...
Click to collapse
Ok, so my reactivation lock is off. I re-downloaded the CF-Auto-Root and I got my phone to work.
Now, with the CWM Based recovery, do I place into the PDA slot in Odin? Or is it not necessary anymore?
On root checker, it hangs and doesn't give me a definite answer
So I'm pretty sure my phone isn't rooted, but for now, its working fine.
143bubblepop said:
Ok, so my reactivation lock is off. I re-downloaded the CF-Auto-Root and I got my phone to work.
Now, with the CWM Based recovery, do I place into the PDA slot in Odin? Or is it not necessary anymore?
On root checker, it hangs and doesn't give me a definite answer
So I'm pretty sure my phone isn't rooted, but for now, its working fine.
Click to expand...
Click to collapse
So you flash again cf auto root successfully?. If yes your phone should be rooted now so you dont need cwm anymore except you want to flash custom rom or mods.
Can't remember when i flash cf last time whether there is superSU in the app drawer or not. Can you see it in the phone?. Try install superSU from Playstore and update binary and rerun root checker.
Still if you want to flash cwm just put it in pda
Rosli59564 said:
Just the same as you did using cf auto root but you'll need this instead.
http://forum.xda-developers.com/showthread.php?t=2454079
Choose the one either jb or kk.
Did you turn off reactivation lock before trying to root?
Afraid that's the one causing your phone to hangup at the screen. Remove battery and turn on your phone if it can boot normally in OS
Click to expand...
Click to collapse
Rosli59564 said:
So you flash again cf auto root successfully?. If yes your phone should be rooted now so you dont need cwm anymore except you want to flash custom rom or mods.
Can't remember when i flash cf last time whether there is superSU in the app drawer or not. Can you see it in the phone?. Try install superSU from Playstore and update binary and rerun root checker.
Still if you want to flash cwm just put it in pda
Click to expand...
Click to collapse
I installed SuperSu and restarted my phone and that, opened up root checker and BAM, I'm rooted.
If I were to install CWM, would I need to rewrite my binary for SuperSU
143bubblepop said:
Ok, so my reactivation lock is off. I re-downloaded the CF-Auto-Root and I got my phone to work.
Now, with the CWM Based recovery, do I place into the PDA slot in Odin? Or is it not necessary anymore?
On root checker, it hangs and doesn't give me a definite answer
So I'm pretty sure my phone isn't rooted, but for now, its working fine.
Click to expand...
Click to collapse
Yes in PDA slot in ODIN...
143bubblepop said:
I installed SuperSu and restarted my phone and that, opened up root checker and BAM, I'm rooted.
If I were to install CWM, would I need to rewrite my binary for SuperSU
Click to expand...
Click to collapse
I don't think you'll need to
Rosli59564 said:
I don't think you'll need to
Click to expand...
Click to collapse
i started flashing CWM and its been stuck on the downloading, set warranty bit: cache page for a while now. Would it normally take a while or does it depends on the computer?
143bubblepop said:
i started flashing CWM and its been stuck on the downloading, set warranty bit: cache page for a while now. Would it normally take a while or does it depends on the computer?
Click to expand...
Click to collapse
It shouldn't. Which cwm version you used?
Rosli59564 said:
It shouldn't. Which cwm version you used?
Click to expand...
Click to collapse
http://d-h.st/users/xiaolu/?fld_id=31963
That one,
So what do I do now?
143bubblepop said:
http://d-h.st/users/xiaolu/?fld_id=31963
That one,
So what do I do now?
Click to expand...
Click to collapse
Just to be sure n9005 for kk?. Redownload and reflash. If still hangup at the screen try boot up normally. Perhaps can try with terminal emulator to flash cwm
Rosli59564 said:
Just to be sure n9005 for kk?. Redownload and reflash. If still hangup at the screen try boot up normally. Perhaps can try with terminal emulator to flash cwm
Click to expand...
Click to collapse
Do i stop the flashing right now and unplug?
Now that i think of it, my device isnt even KK
143bubblepop said:
Do i stop the flashing right now and unplug?
Now that i think of it, my device isnt even KK
Click to expand...
Click to collapse
As i guess. You phone is 4.3 right? Download for 4.3 i think 6.0.4.5. Remove battery, reenter download mode & reflash the correct file
Rosli59564 said:
As i guess. You phone is 4.3 right? Download for 4.3 i think 6.0.4.5. Remove battery, reenter download mode & reflash the correct file
Click to expand...
Click to collapse
i cant find the 4.3 one, yes i tried google
please help
also my phone boots normally
143bubblepop said:
i cant find the 4.3 one, yes i tried google
please help
also my phone boots normally
Click to expand...
Click to collapse
i tried their website but all i could find were .img files
also, im sorry with my delayed replies, my gmail isnt refreshing constantly
143bubblepop said:
i tried their website but all i could find were .img files
also, im sorry with my delayed replies, my gmail isnt refreshing constantly
Click to expand...
Click to collapse
First check setting>general>about phone. Check what is android version either 4.3 or 4.4.2.
If it is 4.3 download either the followings
https://mega.co.nz/#!C0Y1RbyT!Iq1A1Aaef1qioyDHkGQVtkRUdGN0LCa37umKGMDyDs8
You need to install mega from playstore to download it
Or try twrp
http://forum.xda-developers.com/showthread.php?t=2494245
Rosli59564 said:
First check setting>general>about phone. Check what is android version either 4.3 or 4.4.2.
If it is 4.3 download either the followings
https://mega.co.nz/#!C0Y1RbyT!Iq1A1Aaef1qioyDHkGQVtkRUdGN0LCa37umKGMDyDs8
You need to install mega from playstore to download it
Or try twrp
http://forum.xda-developers.com/showthread.php?t=2494245
Click to expand...
Click to collapse
Its 4.3
Install mega?
143bubblepop said:
Its 4.3
Install mega?
Click to expand...
Click to collapse
If you would like twrp no need mega. Just download it from the site
Hi everyone, I need help, because today I was trying to install TWRP (2.7.0.4 and also tried 2.7.0.34) in my Exynos Note 3 with Odin 3.09 (I tried 3.07 too) and I do the process correctly and it says RESET! with no errors, but when I try to enter the recovery, it boots the stock recovery :/
Why is this happening?
Thank you very much.
Did you flash CWM before that? Odin and TWRP aren´t friends
Or try TWRP manager. In manager flash img
verny94 said:
Did you flash CWM before that? Odin and TWRP aren´t friends
Or try TWRP manager[/URL]. In manager flash img
Click to expand...
Click to collapse
No because I don't have the phone rooted, the idea is install the recovery and then root it. I will try with CWM
Didn't know you could install custom recovery without being rooted. . and I think you don't. If you want to root anyway than just do it and than install cwm mate.
4aces said:
Didn't know you could install custom recovery without being rooted. . and I think you don't. If you want to root anyway than just do it and than install cwm mate.
Click to expand...
Click to collapse
I solve the problem, I untick the Auto reboot in Odin and then enter recovery without restart and installed a .zip to solve that program and then I rooted it and I'm happy
4aces said:
Didn't know you could install custom recovery without being rooted. . and I think you don't. If you want to root anyway than just do it and than install cwm mate.
Click to expand...
Click to collapse
But I think he can install CWM without root It change KNOX to 0x1. And after that install TWRP
Because in custom recovery he choose root with SuperSU
verny94 said:
But I think he can install CWM without root It change KNOX to 0x1. And after that install TWRP
Because in custom recovery he choose root with SuperSU
Click to expand...
Click to collapse
Just informed myself..lol and you are right. But it is a real pain in the a**. You need to flash bootloader and... never mind he fixed it anyway by rooting
Hi all,
I rooted my smg900f two days ago and flashed a recovery, everything went fine, I tried a couple of custom rom and at some point I noticed that I didn't have root access anymore (checked with root checker). I launched towelroot again, and now it says that my device is not supported yet. Does anybody encountered the same issue ?
ElChouch said:
Hi all,
I rooted my smg900f two days ago and flashed a recovery, everything went fine, I tried a couple of custom rom and at some point I noticed that I didn't have root access anymore (checked with root checker). I launched towelroot again, and now it says that my device is not supported yet. Does anybody encountered the same issue ?
Click to expand...
Click to collapse
Just flash the latest superSU.zip with a custom recovery, link http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip.
Thanks for the tip but it didn't work
ElChouch said:
Thanks for the tip but it didn't work
Click to expand...
Click to collapse
What recovery do you have and what did you do exactly?
gee2012 said:
What recovery do you have and what did you do exactly?
Click to expand...
Click to collapse
I have clockwork recovery, I had Omega ROM running on my phone (maybe at this moment I already lost root but I only noticed it after), I tried to flash this mod, it didn't work so after a few tries I full wiped my phone and insalled Omega 8.0 again. Then I noticed I lost root access when trying to open some apps.
I also flashed the bootloader for SMG900F featured in the Omega rom thread
That's about it
ElChouch said:
I have clockwork recovery, I had Omega ROM running on my phone (maybe at this moment I already lost root but I only noticed it after), I tried to flash this mod, it didn't work so after a few tries I full wiped my phone and insalled Omega 8.0 again. Then I noticed I lost root access when trying to open some apps.
I also flashed the bootloader for SMG900F featured in the Omega rom thread
That's about it
Click to expand...
Click to collapse
Flash CF Auto Root with Odin, your KNOX flag is tripped anyway. Link http://download.chainfire.eu/397/CF-Root/CF-Auto-Root/CF-Auto-Root-klte-kltexx-smg900f.zip.
gee2012 said:
Flash CF Auto Root with Odin, your KNOX flag is tripped anyway. Link http://download.chainfire.eu/397/CF-Root/CF-Auto-Root/CF-Auto-Root-klte-kltexx-smg900f.zip.
Click to expand...
Click to collapse
Might be a stupid question but in which slot should I load the tar file ? BL/AP/CP/CSC ?
ElChouch said:
Might be a stupid question but in which slot should I load the tar file ? BL/AP/CP/CSC ?
Click to expand...
Click to collapse
AP is the right one.
gee2012 said:
AP is the right one.
Click to expand...
Click to collapse
This didn't work neither :-/
ElChouch said:
This didn't work neither :-/
Click to expand...
Click to collapse
Then i suggest you flash a stock rom, factory reset and root/flash custom recovery from scratch. Its seems some files are messed up that prevents you to root. Backup important files to the pc/sdcard first. That is what i would do at least
gee2012 said:
Then i suggest you flash a stock rom, factory reset and root/flash custom recovery from scratch. Its seems some files are messed up that prevents you to root. Backup important files to the pc/sdcard first. That is what i would do at least
Click to expand...
Click to collapse
I ll try this asap thanks for the help
ElChouch said:
I ll try this asap thanks for the help
Click to expand...
Click to collapse
Good luck mate. After the flash and factory reset flash a custom recovery and then the superSU.zip and you`re rooted.
gee2012 said:
Good luck mate. After the flash and factory reset flash a custom recovery and then the superSU.zip and you`re rooted.
Click to expand...
Click to collapse
Last question (I hope) I have backup files (from my stock rom) I generated with CWM recovery, but it seems I lost CWM too, can I flash this backup with Odin ?
ElChouch said:
Last question (I hope) I have backup files (from my stock rom) I generated with CWM recovery, but it seems I lost CWM too, can I flash this backup with Odin ?
Click to expand...
Click to collapse
There should be a folder on the sdcard named Clockworkmod with the backup, save it to the sdcard before you factory reset. No a backup can`t be flashed with Odin, only in recovery
gee2012 said:
There should be a folder on the sdcard named Clockworkmod with the backup, save it to the sdcard before you factory reset. No a backup can`t be flashed with Odin, only in recovery
Click to expand...
Click to collapse
Ok so I got this rom Alvin's_G900F_XXU1ANG2_Deodexed I boot in regular recovery, start flashing the rom, but it doesn't work and I'm still stuck on Omega rom with no root nor custom recovery :-/ what did I do wrong ?
ElChouch said:
Ok so I got this rom Alvin's_G900F_XXU1ANG2_Deodexed I boot in regular recovery, start flashing the rom, but it doesn't work and I'm still stuck on Omega rom with no root nor custom recovery :-/ what did I do wrong ?
Click to expand...
Click to collapse
Did you flash a stock rom with Odin or flash a custom rom in 3rd recovery? Just do a data factory reset in recovery, pull the battery and wait 20 seconds and flash a stock rom with Odin.
gee2012 said:
Did you flash a stock rom with Odin or flash a custom rom in 3rd recovery? Just do a data factory reset in recovery, pull the battery and wait 20 seconds and flash a stock rom with Odin.
Click to expand...
Click to collapse
There is definitely something i miss... The Rom I downloaded is a .zip with the regular boot.img and all that stuff into it, I can't flash that with Odin right ? I need a .tar right ?
ElChouch said:
There is definitely something i miss... The Rom I downloaded is a .zip with the regular boot.img and all that stuff into it, I can't flash that with Odin right ? I need a .tar right ?
Click to expand...
Click to collapse
You need a md5/tar file for Odin, look on Sammobile/firmwares for it.
gee2012 said:
You need a md5/tar file for Odin, look on Sammobile/firmwares for it.
Click to expand...
Click to collapse
I did it all as you said, everything went fine, Odin said it passed the rom flashing, but then I'm stuck in a boot loop any idea ?
I'm about to try to flash a stock bootloader
ElChouch said:
I did it all as you said, everything went fine, Odin said it passed the rom flashing, but then I'm stuck in a boot loop any idea ?
I'm about to try to flash a stock bootloader
Click to expand...
Click to collapse
No, pull the battery andere wait 20 seconds. Then boot into recovery and data factory reset and reboot.
Hi, kind of a NOOOB here! want to root my S5
Tried flashing with openrecovery-twrp-2.8.5.0-gt-klte and philz_touch_6.26.2-klte.tar
and i still get the stock recovery!
included a screenshot about my device.
This may be a dumb question, but you are using Odin, correct? And what version? On a Mac or PC?
metalfan78 said:
This may be a dumb question, but you are using Odin, correct? And what version? On a Mac or PC?
Click to expand...
Click to collapse
Hi! yes i am using Odin 3.10.6 and a PC Windows 7
I'm not familiar with other versions of the s5, are you 8s9ng the correct recovery file? Which slot are you putting it in?it should go into AP, if I remember correctly.
Hi! Far as i know i use The correct file, do you maybe have a Link to one?
Yeah i check The AP then use The file i downloaded then click start, The flashing process passes but still stock recovery...
Sent from my SM-G900F using XDA Free mobile app
I ran into the same problem, flashed TWRP 3 times and KNOX remained 0x0 and recovery remained stock
Ended up having to use CF Auto Root to gain root, then use TWRP Manager to flash TWRP
https://play.google.com/store/apps/details?id=com.jmz.soft.twrpmanager
*Detection* said:
I ran into the same problem, flashed TWRP 3 times and KNOX remained 0x0 and recovery remained stock
Ended up having to use CF Auto Root to gain root, then use TWRP Manager to flash TWRP
https://play.google.com/store/apps/details?id=com.jmz.soft.twrpmanager
Click to expand...
Click to collapse
Hmm, so if i get this correct i download CF Auto Root and flash that via Odin and then dowloand this app you menationed and then flash thru that so i have twrp? i that case do you maybe have a link where i could download CF Auto Root ?
Tanks, appreciate it =)
uffis88 said:
Hmm, so if i get this correct i download CF Auto Root and flash that via Odin and then dowloand this app you menationed and then flash thru that so i have twrp? i that case do you maybe have a link where i could download CF Auto Root ?
Tanks, appreciate it =)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2696537
There you go
VfBStuttgart27 said:
http://forum.xda-developers.com/showthread.php?t=2696537
There you go
Click to expand...
Click to collapse
Thanks i will give it a try, its a little bit more to do as i see
*Detection* said:
I ran into the same problem, flashed TWRP 3 times and KNOX remained 0x0 and recovery remained stock
Ended up having to use CF Auto Root to gain root, then use TWRP Manager to flash TWRP
https://play.google.com/store/apps/details?id=com.jmz.soft.twrpmanager
Click to expand...
Click to collapse
Btw, did u have the sam baseband when encountering this problem? read that some ppl have issues with this.
uffis88 said:
Btw, did u have the sam baseband when encountering this problem? read that some ppl have issues with this.
Click to expand...
Click to collapse
Yea flash CF Auto Root via ODIN, then install that TWRP app and the app itself will flash TWRP for you
I was running stock BOB7 when I tried to flash TWRP
*Detection* said:
Yea flash CF Auto Root via ODIN, then install that TWRP app and the app itself will flash TWRP for you
I was running stock BOB7 when I tried to flash TWRP
Click to expand...
Click to collapse
thanks mate! everything worked like a charm, i have a rooted s5 now =)
any tips on some ROM that is good?
Guys I have an unrooted phone which I want to install TWRP on. When I flash TWRP via Odin it says ''Custom binary blocked by FRP lock'' I really don't know what to do. Can any of you help me?
kurskoo40 said:
Guys I have an unrooted phone which I want to install TWRP on. When I flash TWRP via Odin it says ''Custom binary blocked by FRP lock'' I really don't know what to do. Can any of you help me?
Click to expand...
Click to collapse
Try installing firmware through odin then again start the rooting and installing process of TWRP.
rokilmr said:
Try installing firmware through odin then again start the rooting and installing process of TWRP.
Click to expand...
Click to collapse
Do you mean the stock firmware?
kurskoo40 said:
Do you mean the stock firmware?
Click to expand...
Click to collapse
Yes, you need to flash the stock firmware first. Download from sites like Sammobile.
Then flash via Odin.
After that enable developer mode and make sure to turn on Oem Unlock.
Then flash root or flash twrp.
kurskoo40 said:
Guys I have an unrooted phone which I want to install TWRP on. When I flash TWRP via Odin it says ''Custom binary blocked by FRP lock'' I really don't know what to do. Can any of you help me?
Click to expand...
Click to collapse
I can help you, contact me: fb.com/sanguine9x