Database Users

Cannot root my samsung e5

After last update of 5.1.1 my device is not rooting using odin. And will samsung e5 get official marshmallow update?

SIMPLYJITU_08 said:
After last update of 5.1.1 my device is not rooting using odin. And will samsung e5 get official marshmallow update?
Click to expand...
Click to collapse
Make sure that u have installed usb drivers for your mobile And reactivation lock must be off.

[Update: Galaxy S7 edge too!] Full Android 7.0 firmware for the Galaxy S7 now availab

The firmware are available for two regions: UK (BTU) and the Czech Republic (O2C). You can download these Nougat-based firmware files and flash your compatible Galaxy S7 models manually (you should also be able to update your device through Samsung Smart Switch on your PC). Galaxy S7 edge firmware shouldn’t be far behind, and we will be sure to let you know once those show up in our database.
For S7 Edge : https://www.sammobile.com/firmwares/download/120208/G935FXXU1DPLT_G935FOXA1DPLT_BTU/
For S7 : https://www.sammobile.com/firmwares/download/120140/G930FXXU1DPLT_G930FOXA1DPLT_BTU/
Source: sammobile.com

will it work on dual sim s7 edge (sm-g935f)

sagor1 said:
will it work on dual sim s7 edge (sm-g935f)
Click to expand...
Click to collapse
Yes

Right .. I've been reading and researching this .. but can't find a definitive answer. Perhaps one of you gurus can assist. According to Phone INFO I have the following setup:
Bootloader/PDA/Baeband Version: G935FXXU1DPLT
CSC Version: G935FOXA1DPLT
When I try to use/install the Galaxy Gear VR, I keep getting "network error". From my research, this is linked to the CSC. Question is, how do I restore it to base CSC - without rooting?
Any help would be appreciated.
Cheers.

nice. can somebody upload the firmware somewhere else cuz i have to w8 9 hours to dld from sammobile

antenehnile said:
Yes
Click to expand...
Click to collapse
Thanx...
so i read on the other thread 1st i have to download mm btu rom...than i can flash this is it true?
or i just download this and flash it via odin?

sagor1 said:
Thanx...
so i read on the other thread 1st i have to download mm btu rom...than i can flash this is it true?
or i just download this and flash it via odin?
Click to expand...
Click to collapse
The other thread was created when the full firmware was not available yet, the workaround was to flash mm btu then update to nougat. These are the nougat firmwares as they are now available, not the mm ones. so you just have to flash them and you'll have nougat on your phone.

naryraza said:
The other thread was created when the full firmware was not available yet, the workaround was to flash mm btu then update to nougat. These are the nougat firmwares as they are now available, not the mm ones. so you just have to flash them and you'll have nougat on your phone.
Click to expand...
Click to collapse
Thanks Brother.
https://drive.google.com/drive/folders/0BzXXEylDgfZ0MU1EVnh3YnAtc0k
now i am downloading this (2.15gb!)....is it legit? (find it on other xda thread)
Instructions
Extract (unzip) the firmware file
Download Odin v3.11.1
Extract Odin ZIP file
Open Odin v3.11.1
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
is this right instruction?(sammobile)
Because i am so confused about cse,csx,btu......etc on the other thread

I haven't flashed a different CSC cause I don't want to lose features such as the Mobile data toggle, currently on the Arab firmware since my phone is a Duos, anyone know if BTU has the Mobile data toggle even on 7.0?

daLareid said:
I haven't flashed a different CSC cause I don't want to lose features such as the Mobile data toggle, currently on the Arab firmware since my phone is a Duos, anyone know if BTU has the Mobile data toggle even on 7.0?
Click to expand...
Click to collapse
I didn't try yet another SIM but duos options are there... so Insuppose you wont have any problem with it
Sent from SM-G935FD w/ TapaTalk

SM_G935f Samsung pay need Korean sim card???

I got a UAE S7 edge off of amazon about a week ago. Not rooted, running latest OS nougat version available. CSC code is XSG. I just can't get Samsung Pay working on it though. I read from a few places that it is possible to install the framework and samsung pay apk's. I installed the version 2.7.38 framework. I first tried the 2.6.00 version of the Samsung Pay app, but had no luck as I couldn't get past the first screen. I then tried 2.7.46. It managed to load in, but failed because I don't have a Korean sim card in my phone? Can someone please explain to me what I'm screwing up? Or if I can somehow disable this pop-up?

Download XSA (Australia) firmware and flash it in Odin, Australian firmware has it preloaded and working. XSA also has Nougat so you're good.

Interceptor777 said:
Download XSA (Australia) firmware and flash it in Odin, Australian firmware has it preloaded and working. XSA also has Nougat so you're good.
Click to expand...
Click to collapse
Will flashing it trip the Knox? I remember rooting/flashing roms into my old note 5 and tripping the Knox that way.

darkdragonz said:
Will flashing it trip the Knox? I remember rooting/flashing roms into my old note 5 and tripping the Knox that way.
Click to expand...
Click to collapse
If you flash firmware directly from Samsung then no, since the firmware is official and signed by Samsung. If you flash anything Custom such as a custom ROM or Kernel, then yes.
Just download the firmware from Sammobile (Ofiicial Samsung) and flash it via Odin. Knox will not trip.

Interceptor777 said:
If you flash firmware directly from Samsung then no, since the firmware is official and signed by Samsung. If you flash anything Custom such as a custom ROM or Kernel, then yes.
Just download the firmware from Sammobile (Ofiicial Samsung) and flash it via Odin. Knox will not trip.
Click to expand...
Click to collapse
Cool, I'll give it a shot. Thanks

Downgrade Galaxy j500h

How to Downgrade Galaxy j500h from Marshmallow to Lollipop

Here is tutorial that I used. It is easy for newbies.

ahmida dz said:
How to Downgrade Galaxy j500h from Marshmallow to Lollipop
Click to expand...
Click to collapse
If you're using the latest Marshmallow Firmware, then you cannot Downgrade anymore.
More info here: ***Warning*** DO NOT FLASH/INSTALL NEW MARSHMALLOW UPDATES!

what is your current baseband version/the firmware you upgraded to

Missing firmware for SM-J510FN

Hi
My device (Galaxy J5 2016) has recieved the update to Nougat 7.1.1 over an year ago, but I can't appear to be able to check for OTA updates- so I've attempted to look up the firmware online.
Apparently, the FN model is not officialy supported by Samsung for region ILO, so I can't find it's updated firmware anywhere and I oddly enough also can't find the firmware I currently have on this device, so I can't do anything (Also attempted Samsung support.. they can't help me.)
The device is currently on Marshmellow 6.0.1
the CSC is J510FOJK1APE3
AP: J510FNXXU2APK6
CP: J510FNXXU2APK6 (the same as AP)
Model: SM-J510FN
I want to stay using official firmware, avoid tripping KNOX and safely install this update without having to do a factory reset as I'd expect by upgrading a device to a correct firmware. What can I do?

dhtdht020 said:
Hi
My device (Galaxy J5 2016) has recieved the update to Nougat 7.1.1 over an year ago, but I can't appear to be able to check for OTA updates- so I've attempted to look up the firmware online.
Apparently, the FN model is not officialy supported by Samsung for region ILO, so I can't find it's updated firmware anywhere and I oddly enough also can't find the firmware I currently have on this device, so I can't do anything (Also attempted Samsung support.. they can't help me.)
The device is currently on Marshmellow 6.0.1
the CSC is J510FOJK1APE3
AP: J510FNXXU2APK6
CP: J510FNXXU2APK6 (the same as AP)
Model: SM-J510FN
I want to stay using official firmware, avoid tripping KNOX and safely install this update without having to do a factory reset as I'd expect by upgrading a device to a correct firmware. What can I do?
Click to expand...
Click to collapse
There doesn't seem to be Firmware anywhere for the J510FN for Israel.There are plenty firmwares for J510F for Israel but not FN that I can see anywhere just as you said in the post.

Finsnevis said:
There doesn't seem to be Firmware anywhere for the J510FN for Israel.There are plenty firmwares for J510F for Israel but not FN that I can see anywhere just as you said in the post.
Click to expand...
Click to collapse
Am I able to somehow modify the CSC in the firmware to match mine, so I won't have to factory reset / wipe and install it just as it's supposed to be officialy? I find it rather odd I do have a firmware with a CSC that isn't even supported for my device and yet KNOX is untripped and the firmware status is official.