{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
Code:
#include
/*
* Your warranty is now void.
*
*I'm not responsible for bricked devices, dead SD cards, thermonuclear
*war, or you getting fired because the alarm app failed.
*Please do some research if you have any concerns about features *included in the products you find here before flashing it!
*YOU are choosing to make these modifications, and if you point the *finger at me for messing up your device, I will laugh at you.
*Your warranty will be void if you tamper with any part of your device / software.
*/
About
BFF aka BornFromFire is my customized kernel for a series of Huawei MSM8916 devices such as:
Huawei Ascend Y550(Tested)
Huawei Ascend G620S(Not Tested)
Huawei Ascend G760(Not Tested)
Huawei Acend Y635(Tested)
Huawei C8817D(Not Tested)
Huawei C8817E(Not Tested)
Y550 community inspired me to learn more about kernel hacks and optimizations to make this kernel and give users a better experience using the device.
I searched a lot on xda for other custom kernels and I found a really interesting one for Motorola MSM8916 so I started porting its features to our kernel.
Thanks to @FireLord for sources.
Compiled with Uber Toolchain 4.9
Features
Support for HotPlugs
AluCard
IntelliPlug
ThunderPlug
AutoSMP
Support for Governors
AluCard
Authority
BarryAllen
Bioshock
Blu_Active
Darkness
Electrodemand
Hyper
Impulse
Intel
Intellimand
Interactive
Interactive_Pro
Lionfish
Ondemand
Pegasus
Performance
Powersave
Smartmax
Userspace
Wheatley
Yankactive
zzmoove(In-built hotplug. DO NOT USE ANY OTHER HOTPLUG WITH ZZMOVE)
Check here for Governors descriptions: CPU Governors
Support for I/O Schedulers
FIOPS
CFQ
BFQ
ROW
NOOP
DeadLine
CFQ
SIO
SIOPLUS
ZEN
VR
TRIPNDROID
CPU
Fixed High-Load Average from UnInterruptible Waits (reduces CPU-Load even more in idle state).
Support for Fast-IDLING of CPU (should reduce Power-Consumption a lot).
Support for Power Efficient WorkQueue to reduce Power-Consumption
Reduced CPU Average-Load drastically (Less CPU-Load, More Battery-Life).
Over Clocked to 1.60 GHz
GPU
Support for Adreno IDLER algorithm (saves Battery a lot by lowering down the frequency to minimum when the GPU is idle).
Overclocked to 720Mhz
Battery
Support for ARCH_Power to reduce Power-Consumption and increase Battery-Life.
Support for the new PowerSuspend algorithm (improves Battery-Life).
Support for preventing unnecessary WakeLocks (improves Battery-Life). (available under the Misc. Tab of Kernel Adiutor)
Aggressive transition to Power-Collapse Suspend Mode (should improve Battery-Life significantly).
Support for Standalone Power-Collapse (should improve Battery-Life).
Support for switching to Deep Power-Down Mode for RAM when idle (should improve Battery-Life).
Support for Larch Power feature (should improve Battery-Life).
Memory
Support for Kernel SamePage Merging (KSM).
Support for Swap, FrontSwap, and zSwap techniques (improve performance significantly when zRAM is full).
Support for Memory Compaction (improves performance).
Support for CleanCache Driver (improves I/O performance).
Support for Cross-Memory.
Support for zRAM compression algorithm (improves performance by saving memory).
Support for Virtual Memory Reclaim (should free more RAM).
Optimizations and Tweaks
Disabled CRC-Check for upto 30% faster I/O.
Support for FRandom RNG Driver (upto 50x faster than the default one).
Compiled with UberTC 4.9.4 (Uber uses the latest of every component as well as increases the Battery-Life too).
Support for Dynamic-FSync (adjusts FSync according to usage resulting in a significant boost in the I/O performance).
SELinux to Permissive
Support for Touch-Boost and CPU-Boost.
Support for Vibration Intensity Control (available in Misc. TAB of Kernel Adiutor).
Lowest Possible CPU-Usage (a lot of tweaks have been implemented system-wide).
Support for a bunch of TCP-Congestion Algorithms (available in Misc. TAB of Adiutor).
Tweaked MSM-Thermal to improve Heat-Management of SoC.
Support for CRC-Toggle (Disabled by Default in Misc. TAB).
Optimized task_sched_runtime for upto 20% increase in Performance.
Optimizations to reduce WakeLocks.
Optimized Console FrameBuffer for upto 70% increase in Performance.
USB fast charge
NTFS support(not sure of that kek)
DOWNLOAD: BFF_Kernel_v01
Installation
Download the zip file
Reboot to your recovery (I suggest you to use latest TWRP)
BACKUP your BOOT partition (to make it safe so your can easely restore if found any problem)
Install the zip file
Reboot to system
XDAevDB Information
BornFromFire Kernel Lollipop Edition, for some Huawei MSM8916 devices
Credits
@FireLord @dianlujitao @Blefish @surdu_petru @desalesouche
@Shoaib05
Source code: Hacker432-Y550 Github
Kernel Special Features: balanced kernel, performance and battery.
Version Information
Status: Beta
Beta release date: 2016-09-21
Created: 2016-09-18
Last Updated: 2016-09-19
Reserved #1
Reserved #2
Nice work.
Bro great work I will test asap. How's the battery by the way?
Testing it on y635 no pc hope it works.
---------- Post added at 02:06 PM ---------- Previous post was at 01:41 PM ----------
You can add that it works on y635-01
TheMichalos said:
Testing it on y635 no pc hope it works.
---------- Post added at 02:06 PM ---------- Previous post was at 01:41 PM ----------
You can add that it works on y635-01
Click to expand...
Click to collapse
Thank you
I suggest you to use darkness governor it works good
And for I/O sched fiops or vr
With read ahead set to 1024
Thanks to @dabi01 for that configs
Inviato dal mio Y550-L01 utilizzando Tapatalk
Hacker432 said:
Thank you
I suggest you to use darkness governor it works good
And for I/O sched fiops or vr
With read ahead set to 1024
Thanks to @dabi01 for that configs
Inviato dal mio Y550-L01 utilizzando Tapatalk
Click to expand...
Click to collapse
Do these settings also apply for y550?
After a bit of testing. Bugs
-audio playback (front,back speaker)
-video playback (youtube app)
For me it is unusable for this moment.
(tested on y635 might work on y525)
adil089 said:
Do these settings also apply for y550?
Click to expand...
Click to collapse
Yes
Do it in kernel auditor
Inviato dal mio Y550-L01 utilizzando Tapatalk
TheMichalos said:
After a bit of testing. Bugs
-audio playback (front,back speaker)
-video playback (youtube app)
For me it is unusable for this moment.
(tested on y635 might work on y525)
Click to expand...
Click to collapse
It is not kernel
A tester hade same problems he rebooted and then all was working
Inviato dal mio Y550-L01 utilizzando Tapatalk
Hacker432 said:
It is not kernel
A tester hade same problems he rebooted and then all was working
Inviato dal mio Y550-L01 utilizzando Tapatalk
Click to expand...
Click to collapse
Doesnt work. Did fresh clean install of cm12 and tested it on orion lp. Still doesnt work. Audio and video playback (probably doesnt work cuz of audio) works back after going back to orion stock kernel.
---------- Post added at 07:01 PM ---------- Previous post was at 06:56 PM ----------
Update aka LogCat.
Getting spammed with "Opening sound card state : /proc/asound/card---/state"" and Opening sound card state : /proc/asound/card---/state failed no such file or directory then "boolandroid::AudioDaemon::getStateFDs(std::vector<std:air<int, int>>&): 0 sounds card detected" then "Sleeping for 100ms" and it loops itself.
TheMichalos said:
Doesnt work. Did fresh clean install of cm12 and tested it on orion lp. Still doesnt work. Audio and video playback (probably doesnt work cuz of audio) works back after going back to orion stock kernel.
---------- Post added at 07:01 PM ---------- Previous post was at 06:56 PM ----------
Update aka LogCat.
Getting spammed with "Opening sound card state : /proc/asound/card---/state"" and Opening sound card state : /proc/asound/card---/state failed no such file or directory then "boolandroid::AudioDaemon::getStateFDs(std::vector<std:air<int, int>>&): 0 sounds card detected" then "Sleeping for 100ms" and it loops itself.
Click to expand...
Click to collapse
Link to ROM please
Inviato dal mio Y550-L01 utilizzando Tapatalk
Hacker432 said:
Link to ROM please
Inviato dal mio Y550-L01 utilizzando Tapatalk
Click to expand...
Click to collapse
http://www.htcmania.com/showthread.php?t=1231190 now im using other rom gonna try installing that kernel when i will wake up
Hello guys, I have been testing this kernel for a couple of days and this is my review. Everything works perfectly fine except from a couple things. When the kernel settings are applied in kernel auditor the settings don't stick after reboot. Some settings stick and some dont like the maximum GPU frequency. Also the CPU governor doesn't stick after reboot and the have to be changed. Apart from that I have been using snartmax governor with sio scheduler and the CPU frequency minimum is 302mhz and the maximum is 1152. Overall I have tweaked the kernel for battery and the results are amazing. Thanks for the kernel and hope that the little issues get fixed.
This is the screen on time I got but I know I can get even more out of it!!
adil089 said:
Hello guys, I have been testing this kernel for a couple of days and this is my review. Everything works perfectly fine except from a couple things. When the kernel settings are applied in kernel auditor the settings don't stick after reboot. Some settings stick and some dont like the maximum GPU frequency. Also the CPU governor doesn't stick after reboot and the have to be changed. Apart from that I have been using snartmax governor with sio scheduler and the CPU frequency minimum is 302mhz and the maximum is 1152. Overall I have tweaked the kernel for battery and the results are amazing. Thanks for the kernel and hope that the little issues get fixed.
Click to expand...
Click to collapse
I think u need to enable option on kernel adiutor to run settings on startup.
TheMichalos said:
I think u need to enable option on kernel adiutor to run settings on startup.
Click to expand...
Click to collapse
Yes I have already done that but the problem is still there. Some of the kernel changes are applied but some are not.
This is a recent screenshot of a benchmark that I ran to give you guys an idea of what the phone runs like with my settings which are mentioned in a previous post.
Guys quick update looks like I was checking the settings too fast after my phone booted. But I gave it a bit of time and all the settings applied perfectly. So there is no problem with the kernel at all. Thanks to the dev for the awesome work!
Related
Hello all together, today I will start the first S7 edge kernel thread here on XDA.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Supports Touchwiz 6.0.1
IF YOU FOLLOW MY STEPS BELOW, YOU WILL LOSE YOUR WARRANTY, KNOX WILL DISPLAY 0x1! I'M NOT RESPONSIBLE FOR ANY DAMAGED DEVICE!
If you want to take my work and need it somewhere, or do other things with it, please ask me first for the permission. Otherwise you are not allowed to take it! Thank you !
SuperMan-Rom, a Touchwiz based rom made by myself!
If you have an other kernel tweaker installed, please uninstall it before flashing this. At the moment, stweaks or synapse is not compatible, so please use kernel adiutor intead.
Also, make sure your lockscreen is NOT protected by a fingerprint, because fingerprint is not working with custom kernel at the moment
Features of this Kernel:
- Built with latest sabermod Toolchain 5.3, update 2016.02
- Latest Linux version 3.18.34, is always up to date
- Choose between different CPU governors: performance, powersave, userspace, ondemand, interactiv (default), conservative, zzmoove, barry_allen, nightmare, darkness, pegasusq, yankactive intelliactive, ondemandplus, intellimm, bioshock, lionheart, smartmax, smartass2, smartmax_eps, alucard, blu_active, cafactive, electrodemand, ondemand_x, hyper and intellidemand
- Built with latest ramdisk sources from samsung (APE9)
- Kernelsource from latest Update (also APE9)
- Frandom Support
- I/O schedulers: CFQ (Default), No-op, Deadline, BFQ, FIOPS, SIO, VR, ZEN, FIFO, and SIOplus
- UKSM (Ultra Kernel Samepage Merging)
- Zram can be set in sTweaks
- Gentle fair sleeper
- Init.d Support
- CIFS/NFS file systems enabled
- Allow ADB-Insecure
- TCP (Network) control: Bic (default), Reno, cubic, Westwood, Highspeed, Hybla, HTCP, Vegas, Veno, Scalable, LP, Yeah and Illinois
- SeLinux is set to permissive
- Fingerprint files will be removed while flashing this kernel!
Download:
V1.0 available on XDA servers
Bugs/Problems:
- FingerPrint Sensor currently not working!
Instructions:
0. Make sure you don't have your screen locked by a fingerprint! Because fingerprint is currently not supported! So select any other screen locking method
1. Install a custom recovery for your phone, like this one here:TWRP/URL]
2. Follow the instructions on the page above, until you get a working recovery
3. Download the Kernel from below and copy it to your external SD Card
4. Reboot to your recovery by pressing volume up, home button and power button at the same time.
5. Install zip/select the kernel
6. Wipe cache and dalvik cache (recommand)
7. Reboot
Support:
If you like my work, feel free to hit thanks and/or give me a small donation by clicking the link right below. Thank you very much in any way! :good:
[URL="https://www.paypal.com/us/cgi-bin/webscr?cmd=_flow&SESSION=hL_KDibncNalRzIuJ7onG9hqmmHoeQB9Rk4X31Q0NxGaQ4gbniYjxMuA5ZC&dispatch=5885d80a13c0db1f8e263663d3faee8dcce3e160f5b9538489e17951d2c62172"]Donation ULR
Credits/Thanks:
- Samsung for sources
- the great linus for his amazing kernel source
- arter97
- Jesec
- dorimanx!
- neobuddy83
XDA:DevDB Information
SuperKernel for hero2lte, Kernel for the Samsung Galaxy S7 Edge
Contributors
Tkkg1994
Source Code: https://github.com/Tkkg1994/SM-G930F
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V1.0
Stable Release Date: 2016-05-30
Created 2016-05-30
Last Updated 2016-05-30
Reserved
Reserved
First! Using your awesome rom(waiting for PEK update and now the kernel, gonna try it.
I wonder if ondemand or cafactive can unthrottle the phone while gaming, i hope you can improve ram management and disable DVFS, gonna test it now.
Derpling said:
First! Using your awesome rom(waiting for PEK update and now the kernel, gonna try it.
I wonder if ondemand or cafactive can unthrottle the phone while gaming, i hope you can improve ram management and disable DVFS, gonna test it now.
Click to expand...
Click to collapse
Ram management is already very much improved. Also in linux: free ram is wasted ram!
PEK update won't come, only if there is a new june build
Sent with my SM-G930F powered by SuperMan
Download link is dead
---------- Post added at 08:59 PM ---------- Previous post was at 08:55 PM ----------
Tkkg1994 said:
Ram management is already very much improved. Also in linux: free ram is wasted ram!
PEK update won't come, only if there is a new june build
Sent with my SM-G930F powered by SuperMan
Click to expand...
Click to collapse
Samsung ram management is so bad even in 6.0.1. My G3 did better.
Thank you nonetheless for the effort.
Derpling said:
Download link is dead
---------- Post added at 08:59 PM ---------- Previous post was at 08:55 PM ----------
Samsung ram management is so bad even in 6.0.1. My G3 did better.
Thank you nonetheless for the effort.
Click to expand...
Click to collapse
What means bad ram management for you?
Please use this thread: SuperKernel
@MikeChannon, can you please delete this thread? (Accidentally created it in the wrong thread section) Couldn't manage it myself
thank you
pattern
hello! thank you for your hard work in our s7 edge! i have flashed your rom, and now your kernel, but I am currently having a problem unlocking my phone... it doesnt recognise my unlocking pattern... is there any fix for this?
---------- Post added at 08:47 PM ---------- Previous post was at 08:15 PM ----------
dodomanhia said:
hello! thank you for your hard work in our s7 edge! i have flashed your rom, and now your kernel, but I am currently having a problem unlocking my phone... it doesnt recognise my unlocking pattern... is there any fix for this?
Click to expand...
Click to collapse
thankfully, I was able to fix it...for anyone stuck with the same problema as I, perhaps using twrp to remove your keys will work
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
General
Working on All Moto Z Models
Working with all Lineage based Rom (can work on Stock Rom <- not confirmed)
Kernel Version : 3.18.70+
CAF Upstream Patches
Anykernel Installer
Fully working with Kernel Adiutor
CPU
CPU up to 2.15 GHz
ElementalX, Ondemand, Interactive, Performance, Conservative, dancedance, nightmare, powersave CPU Governors
Undervolt support with Kernel Adiutor (be careful, device is instable very fast)
CPU Input Boost
MSM Touch Boost
GPU
GPU up to 624 MHz
GPU down to 133 MHz
Adreno Idler
Adreno Boost
IO/Scheduler
ZEN, MAPLE, BFQ, SIO, SIOPLUS, VR, FIFO, TRIPNDROID and FIOPS
Filesystem
Fsync switch
EXT4 Filesystem
F2FS Filesystem
NTFS Filesystem R/W
HFS+ Filesystem R/W
Display
Sweep2wake, Doubletap2wake and Sweep2sleep
Display Backlight Dimmer
Display KCAL
Connection
new Wifi driver from CAF
more TCP Cong
Power/Wakelock
Powerefficient Workqueue
Wakelock switch
Quick Wakeup
Misc
FingerPrint as HomeButton on PowerButton
zRAM Support
optimized LMK
some Backports from Linux 4.4 and Linux 4.9
SafetyNet patched
more...
Build/System
optimized UBERTC 4.9.
-Ofast and graphite + pipe flag
optimized for Kryo
Ubuntu 16.10 Build System
Be careful!!! Make backup before flash. Please report if you find an issue. For now i use it with LOS 14.1.
Changelog
Download @ XDA
Thanks to:
LineageOS
flar2
UBERTC
more
XDA:DevDB Information
[KERNEL][3.18.70+]PhoeniX - fast/smooth/battery-friendly, Kernel for the Moto Z
Contributors
AuxXxilium
Source Code: http://build.webcs.one/AuxXxilium/kernel-msm
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: PhoeniX_2017_09_11
Stable Release Date: 2017-09-11
Created 2017-08-02
Last Updated 2017-09-11
Changelog and more...
Upcoming
PhoeniX_2017_XX_XX
back to HZ 300 - not noticeable slower but saves battery
PhoeniX-Light comes up (same performance, not full feature pack, close to stock los)
Changelog
PhoeniX_2017_09_11 <- wipe cache after install
enabled HMP Power Aware - group tasks to active cores (not freezed or inactive)
removed core_ctl from thermal driver
removed zRAM
added new LZ4 compressor
added drop caches while screen off
enabled strict aliasing
updated WiFi from CAF
removed camera debug
more CAF and Linux patches (camera, mdss, ...)
PhoeniX_2017_09_09
CPU Undervolt support with Kernel Adiutor (be careful, device can be instable very fast)
Linux 3.18.69 -> 3.18.70
use HZ=1000 (to try)
more build optimizations
switch back to Simple Thermal Control (for now)
PhoeniX_2017_09_08_optimized
added Zen Tune
added back Stock Thermal driver and disabled Simple Thermal
more...
PhoeniX_2017_09_08_fix
fixed Kernel Installer issue
added interface for showing cpu voltage (only showing not changing)
update BFQ to v8r10
removed KSM because of to high battery consumption
other fixes
PhoeniX_2017_09_08
reduced some voltages all over the board
patched crypto
merged binder from latest google source
merged f2fs-stable for 3.18.y
added KSM
more small fixes
PhoeniX_2017_09_07
VisionZ -> PhoeniX
only little tweaks
VisionZ_2017_09_06
Linux Upstream 3.18.68 -> 3.18.69
ASOC Backport from 4.4 Kernel
added MSM Simple Thermal Control
removed useless Core_Ctl
more...
VisionZ_2017_09_05_UP
Linux Upstream 3.18.31 -> 3.18.68
VisionZ_2017_09_05
defconfig change we have 4 cores not 8
VisionZ_2017_09_04
added some powersuspend patches
VisionZ_2017_09_03_BETA
backport binder from 4.9
removed EVBUG
removed IO sched switcher <- for now
removed EXT2/EXT3 support
added MSM Touchboost
added dynamic Slimbus scaling from MSM8998
added many CAF patches
lower GPU Idle step
switched back to -O3 flag
more backports
WiFi driver update
changelog is to big to write - look into kernel source - please
VisionZ_2017_09_02
full kernel rebased
VisionZ_2017_08_13a
little changes for a bit more smoothness
VisionZ_2017_08_13
add vr, fifo, sioplus and tripndroid io scheduler
VisionZ_2017_08_11a
more build optimization
VisionZ_2017_08_09c
more powersave patches
more optimization
VisionZ_2017_08_08a
powersave patches
LED Control
RCU Boost
new Buildsystem and more...
VisionZ_2017_08_06a - see screenshots: 151xxx in Antutu
Performance patches
new EXT4 driver
new Energy Model for MSM8996AB
more...
VisionZ_2017_08_06 / Smoothness is back!
Wifi-MAC-Fix
Buildoptimizations
cpuidle, scheduler, cpufreq patches
more...
VisionZ_2017_08_04
possible Wifi fix for STOCK rom
temperature fix while using
some logspam removed
some more patches
VisionZ_2017_08_02
new WiFi driver
Input Boost added
Touch Boost added
more performance and upstream patches
Reserved
good work thanks
谢谢大神编译
I did a quick test run just to check all the functions in EX kernel manager. Pretty nice.
I also checked the WiFi. It has the same issue as Lineage original kernel, a generic mac number. ElementalX kernel and latest TurboZ has proper mac numbers.
Sent from my XT1650-03 using Tapatalk
swejuggalo said:
I did a quick test run just to check all the functions in EX kernel manager. Pretty nice.
I also checked the WiFi. It has the same issue as Lineage original kernel, a generic mac number. ElementalX kernel and latest TurboZ has proper mac numbers.
Sent from my XT1650-03 using Tapatalk
Click to expand...
Click to collapse
thank you for report. i will give it a look and change it in my free time.
XT1650-05 The official system wifi can not open, hope to repair early
queenlsl said:
XT1650-05 The official system wifi can not open, hope to repair early
Click to expand...
Click to collapse
tried with *wipe cache*?
queenlsl said:
XT1650-05 The official system wifi can not open, hope to repair early
Click to expand...
Click to collapse
Just to confirm. Using stock firmware (7.0 or 7.1.1) or Lineage based ROM? Stock 7.1.1 does not seem to fully work with some custom kernels yet.
Sent from my XT1650-03 using Tapatalk
AuxXxilium said:
Upcoming
Undervolt
UBERTC 7.x
more powersave patches
more stability and performance patches
Version without CPU and GPU OC
Click to expand...
Click to collapse
Cool roadmap, looking forward to try this kernel
This kernel working for stock rom 7.1.1 ??
rakee said:
This kernel working for stock rom 7.1.1 ??
Click to expand...
Click to collapse
I have not tested but I assume it needs the updated kernel sources to be released from Motorola. Some (or all) kernels don't even boot with stock 7.1.1.
Sent from my XT1650-03 using Tapatalk
Hope to support the official 7.1.1 system, solve the brush after the camera can not be used
Was it safetynet patched?
jerryclho said:
Was it safetynet patched?
Click to expand...
Click to collapse
you can look in github. link is in first post. and if you don‘t know how: yes it is.
I really like how alive this kernel feels [emoji3] Always nice with new stuff
Sent from my XT1650-03 using Tapatalk
@AuxXxilium, are there problems with disabling cores/clusters?
I tried EX kernel manager and I like it.
I enabled the feature to disable the big cluster when in powersave mode.
But now cpu3 is offline, cpu0-2 are online.
I also cannot disable cpu0 and cpu2, I also cannot reenable cpu3.
cpu1 can be disabled and enabled without any problems.
Loader009 said:
@AuxXxilium, are there problems with disabling cores/clusters?
I tried EX kernel manager and I like it.
I enabled the feature to disable the big cluster when in powersave mode.
But now cpu3 is offline, cpu0-2 are online.
I also cannot disable cpu0 and cpu2, I also cannot reenable cpu3.
cpu1 can be disabled and enabled without any problems.
Click to expand...
Click to collapse
ok that's new. haven't tried it. :/ give me some days. a bit busy on msm8998 platform and work. i look to fix it as soon as i can.
Please take your time.
I will be on vacation in less than two weeks so I won't test too much and I will stay on a stable kernel for now
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
INTRODUCTION
Code:
/*
* Your Warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, dead dogs, or cats,
* but i'm very interest in thermonuclear war, so if you point the finger
* at me for messing up your device just because this kernel, I will
* send you to the mars with Nuclear Rocket. Act accordingly.
* I know this paragraph is conspiracy-included, so
* dont ask about it. Welcome.
*/
Pepsy is a custom kernel that improves battery consumptions and performances. It's based on LineageOS's kernel to ensure the best stability. It has a lot of improvements made by various legendary XDA developers. I will ever prefer quality over quantity, so do not ask for useless features. And do not forget to drink a PEPSY!
FEATURES
Compatible with android 8.x
Upstream to latest 3.18.y kernel tag from kernel.org
Synced with latest changes from LineageOS
Synced with latest changes from CodeAuroraForum
Sio, Fiops, Fifo, SioPlus, Tripndroid, VR and Zen ioscheds
Impulse governor
Boeffla's Wakelock Blocker
LCD Notifier driver
Backlight Dimmer
Dynamic Sync Control 2.1
KCAL Post Processing Control v2
Adreno Boost
Adreno idler
WireGuard
USB fast charging up to 900 mA
Disabled CRC check
Swappiness 0
Bic, Cubic, Westwood, Hstcp, Hybla, Htcp, Vegas, Reno, Scalable, Lp, Yeah and Illinois advanced TCP
Disabled various logspam of various drivers
Optimized Interactive governor
Arch Power Energy Saving
Gentle Fair Sleepers
Reworked CPU boost
Reworked msm-thermal
Slab updates
Cfq-iosched upstreams
Optimized cpu-idle
OC: CPU | GPU MSM8996 (Standard frequencies for speedbin 1)
... and much more
Please refer to GitHub for a complete features list
DOWNLOAD
Latest Pepsy Kernel
Compatible with:
MI 5
MI 5s
MI 5s Plus
MI Mix
MI Note 2
INSTALLATION
First time install:
Reboot to TWRP recovery
Flash the kernel zip
Flash Magisk (optional)
Wipe cache and dalvik (optional)
Reboot
Updating the kernel:
Reboot to TWRP recovery
Flash the kernel zip
Wipe cache and dalvik (optional)
Reboot
Coming from another kernel:
Dirty flash your ROM or flash the boot.img only
Flash the kernel zip
Flash Magisk (optional)
Wipe cache and dalvik (optional)
Reboot
THANKS TO
Please refer to GitHub
Donate HERE if you want
XDA:DevDB Information
Pepsy Kernel, Kernel for the Xiaomi Mi 5s Plus
Contributors
Psy_Man
Source Code: https://github.com/PsyMan47/Pepsy-Kernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v0.8
Stable Release Date: 2018-08-04
Created 2018-02-12
Last Updated 2018-08-04
Finally its here.. custom kernel for mi5+.
Thank youu
Sent from my MI 5s Plus using Tapatalk
Looking forward to lineage/aospa support [emoji21]
Anyway thanks!
Sent from my MI 5s Plus using Tapatalk
pote2639 said:
Looking forward to lineage/aospa support [emoji21]
Anyway thanks!
Sent from my MI 5s Plus using Tapatalk
Click to expand...
Click to collapse
Soon, but no eta.
Thank you for your good job.
How can i use kcal color control? I installed color control from savoca but it force closed and not works.
Jamshid27 said:
Thank you for your good job.
How can i use kcal color control? I installed color control from savoca but it force closed and not works.
Click to expand...
Click to collapse
You can manage kcal controls from Kernel adiutor or similar apps
wifi no work for other very good feelings
great work
MI 5s Plus running 7.9.21 WiFi working without a problem. Nice work!
kuto232 said:
wifi no work for other very good feelings
great work
Click to expand...
Click to collapse
Change your ROM
my apologies do not work wifi on viperOS and paranoid ....
I think that I brake
---------- Post added at 01:57 AM ---------- Previous post was at 01:45 AM ----------
Psy_Man said:
Change your ROM
Click to expand...
Click to collapse
except the wifi failure goes great so at first impression, would it be possible to correct that bug for the custom ROM?
regards
kuto232 said:
my apologies do not work wifi on viperOS and paranoid ....
I think that I brake
---------- Post added at 01:57 AM ---------- Previous post was at 01:45 AM ----------
except the wifi failure goes great so at first impression, would it be possible to correct that bug for the custom ROM?
regards
Click to expand...
Click to collapse
"Only MIUI supported for now."
Sent from my Xiaomi MI 5s Plus using XDA Labs
kuto232 said:
my apologies do not work wifi on viperOS and paranoid ....
I think that I brake
---------- Post added at 01:57 AM ---------- Previous post was at 01:45 AM ----------
except the wifi failure goes great so at first impression, would it be possible to correct that bug for the custom ROM?
regards
Click to expand...
Click to collapse
Wifi is exported as .ko module (as MIUI requires) and aosp/cm requires as internal object driver.
Um just noticed on 7.9.21 kernel auditor can't save changes on boot so "on boot" is empty meaning you have to make all changes manually after each boot. Also I noticed my phone won't go down to deep sleep. MI 5s Plus.
Correction, my phone goes down to deep sleep but for like 15seconds from a full charged battery down to 61% will get back to you once I leave the phone to settle. I know I haven't used the phone as much as the stats state.
lineage/aospa support plssss
Zeggi said:
Um just noticed on 7.9.21 kernel auditor can't save changes on boot so "on boot" is empty meaning you have to make all changes manually after each boot. Also I noticed my phone won't go down to deep sleep. MI 5s Plus.
Correction, my phone goes down to deep sleep but for like 15seconds from a full charged battery down to 61% will get back to you once I leave the phone to settle. I know I haven't used the phone as much as the stats state.
Click to expand...
Click to collapse
Give the autostart permission to kernel adiutor for applying changes at boot. Deep sleep it's perfectly working on my mi note 2. Check your battery stats with wakelock detector and see which apps are draining your battery. Also disable the gentle fair sleeper from Kernel adiutor
Just found that le pro 3 has same 821 and I found this thread with awesome profiles.
https://forum.xda-developers.com/le-pro3/how-to/advanced-interactive-governor-le-pro-3-t3533130
I'm running ex kernel manager now and with frostbite profile getting nice stats. Will share in a few days if you guys are curious.
Thanks again Psy_Man
Edit
Found this thread which is also awesome after digging for some more profiles,
https://forum.xda-developers.com/oneplus-3/how-to/advanced-interactive-governor-tweaks-t3476589
Zeggi said:
Just found that le pro 3 has same 821 and I found this thread with awesome profiles.
https://forum.xda-developers.com/le-pro3/how-to/advanced-interactive-governor-le-pro-3-t3533130
I'm running ex kernel manager now and with frostbite profile getting nice stats. Will share in a few days if you guys are curious.
Thanks again Psy_Man
Edit
Found this thread which is also awesome after digging for some more profiles,
https://forum.xda-developers.com/oneplus-3/how-to/advanced-interactive-governor-tweaks-t3476589
Click to expand...
Click to collapse
Having more options is always nice, so please do.
Don't forget to tell us what ROM you're using(!).
MI 5s plus
Sent from my MI 5s Plus using Tapatalk
I Use kernel adiutor and set screen colors but after sleep and wake up display, colors back to stock . Please give me solution .
Miui 7.9.22 developer
Mi5s plus 64g
Jdi panel
Since I installed this kernel I hear a buzz when i play something through the speaker. It's very clear at low volume. Anyone with the same problem?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I will not be held responsible for anything that happens to your device after flashing this kernel. If you don't know how to bring your dead device back to life please don't make any modifications and stay with stock MIUI. Also, if you think that overclocking can harm your device, overheat-it and possibly brick-it, send me a message and I'll be happy in informing you that My kernel's are SAFE.
My name is Luan, I live in a small city near the capital of my state in Brazil, I'm really young to be developing kernel for this phone, maybe even the most young recognized developer in xda :victory: . I'm only 15 years old and I love to compile kernels and reach the limits of the smartphone i'm using (in this case redmi 4x). I can also speak both English and Portuguese Brazillian, which is my "default language :laugh: ".
Kernel info
LH Kernel (aka HexaTurbo) kernel is meant to be simple with only cool features added on top of CAF kernel. Kernel source will always be kept in sync with new caf and mainstream linux (3.18.y) updates. Okay enough of the intro let's move on to the features!
*linux version 3.18.97
*GPU overclock support upto 600MHz
*sound control
*Custom I/O schedulers: sio and zen
*KCAL advanced color control
*disabled crc check
*force fast charge support
*FS: exfat, NTFS & sdcardfs support
*reduced load average
*Enable sha256/512
*KSM enabled
*Vibration control
*Clang compiled
*Using Xiaomi drivers
*Better audio drivers (Thanks to @LuizPauloDamaceno)
*Optimized
*Arch power option
*Gentle fair sleepers
*Better GPU usage and optimization
*CPU modded to go up to 1497mhz BIG and 1344mhz Little
*Zram
*Zwap
*Frontswap
*Using HZ 100 for UI smoothness
*A bunch of stuff here and there
-Download the zip file and save it into the root directory of internal/external storage
-Reboot to recovery mode and flash the zip file
-Reboot device
2018-03-04
Download Kernel
@LuizPauloDamaceno thanks for helping with quality and audio related stuff
@osm0sis for his amazing AnyKernel2 script
@rainforce279 for his awesome features
@EduardoNoyer for making this possible!
@Ashish94 for providing such useful scripts
XDA:DevDB Information
LH KERNEL OFFICIAL, Kernel for the Xiaomi Redmi 4X
Contributors
TecnoTailsPlays, rainforce279, LuizPauloDamaceno, NIkesh001 and Vimalraj1
Source Code: https://github.com/LuanHalaiko/msm-3.18
Kernel Special Features: GPU/CPU OC and much more!
Version Information
Status: Beta
Created 2018-01-21
Last Updated 2019-01-20
Kernel released!!
Using official drivers from xiaomi MiCode
Now being compiled with DragonTC
Changelog
-Rebased on 3.18.97 r33
-Better audio quality on headphones
-Improved Overclocking code
-CPU modded to run at 1497mhz BIG and 1344mhz LITTLE
-Suports every LineageOS 15.1 based roms and LineageOS 14.1 based ones, yes nougat is now supported
-Zram,Zswap,Zcache and frontswap added (Zswap is glitched for now)
-Using a really high touch response time, the UI is way smoother now
A bunch of stuff you guys need to figure out in Kernel Adiutor or EX Kernel manager
I removed 66hz overclock for now becouse of instability issues, it will be added back in the future
Bugs:
For now the navigation buttons can't be remmaped correctly becouse of the new touchscreen driver, to fix just:
rename ft5x06_ts.kl to ft5x06_720p.kl in system/usr/keylayout
Changelog 2018-25-01
-Added Intelli thermal
-Increased audio quality
-Unlocked qcom efuse1 1.5ghz and 1.2ghz clocks for msm8940
-GPU optimizations
-Ram overclock up to 1.2ghz from 921mhz
-Added adreno boost / adreno idler
-Added simple gpu algorithm
-Meltdown patch!
-Overcloked the screen to support 66hz!!!
-Cpu boost enabled
-Zram lz4 compression
-Kernel is now optmized for large apps with Uber Gcc 8.0.0
-CPU and RAM underclock / undervoltage down to 240mhz!!
-Added Async fsync from OnePlus
-Added Swipe 2 wake and double tap 2 wake
-Added a new battery charging technology "QNOVO"
-Added a lot of new TCP schedulers
-Added new I/O schedulers
-Added new cpu governors
-Added the new quick wake up driver
-Enable a sysfs interface for disabling CRC check
-Decreased kernel size
-Disabled Low memory killer for more apps open
-Added 1080 60fps and 4k 30fps recording (Needs a rom with support and camera 2 api)
-Slimbus overclock
-Custom cpu voltage control
And many many more under the hood changes!!
Woks well on NOS!! It solved my battery drain issue.. Tysm!!
Woah! That's amazing! Do you plan on adding CPU governors?
Can you also make it work for nougat too?
is it safe to be 600 mhz
---------- Post added at 04:23 AM ---------- Previous post was at 04:19 AM ----------
can u add cpu over and under clock and dt2w
Damn that's great. Once Gcam is fixed, I'll switch to Oreo + This kernel.
Will you make one for MIUI ?
I got the fpc fingerprint reader and it has a fingerprint delay problem when using custom kernel
I will be very appreciate if it can be fixed
Phuclun510 said:
Will you make one for MIUI ?
I got the fpc fingerprint reader and it has a fingerprint delay problem when using custom kernel
I will be very appreciate if it can be fixed
Click to expand...
Click to collapse
Is there miui rom with android oreo?
yogasetyaadi said:
Is there miui rom with android oreo?
Click to expand...
Click to collapse
Actually no
But i mean the features of this kernel is amazing
this kernel fix led baterry charging on LOS OREO?
@TecnoTailsPlays does this kernel fix the lagging problem while opening apps on Los 15.1? Cuz I face laggy when opening app or switching between task, its annoy me even its not a major bug
Good kernel !!! Please development oc cpu more 15xxghz , uv voltage thanks bro :3
---------- Post added at 11:20 AM ---------- Previous post was at 10:43 AM ----------
The kernel is very nice and smooth, the 3d point is high and the game is very smooth, hopefully the publisher will continue to develop more uv voltages and oc cpu , gpu :good::good::good:
I know you from Redmi 2 Kernel development and now you move to Santoni :good:
Btw, DT2W will be added in future?
Sent from my Redmi 4X using Tapatalk
Support on nitrogen os?
Thanks for sharing
---------- Post added at 11:04 AM ---------- Previous post was at 10:49 AM ----------
I got slow "wake up" when screen off using FP, any idea?
Cardinal-AOSP
Does the kernel work in Enforcing mode (SELinux)?
vincy009 said:
Support on nitrogen os?
Click to expand...
Click to collapse
Yes
BayuMustikaIP said:
this kernel fix led baterry charging on LOS OREO?
Click to expand...
Click to collapse
No, it doesnt
Anyone suggest best settings for balance and performance .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
- Kernel upstream 3.18.132
- KCAL
- GPU OC ( 744Mhz )
- Tuned GPU frequencies table
- CPU OC ( 2,4Ghz )
- CPU Governors: alucard, nightmare, elementalx, smartmax, lionfish, darkness, impulse, wheatley, blu_active, nebula, despair, interactive, conservativex, conservative, onemand, userspace, powersave, bioschock, lionheart, performance
- I/O Schedulers: noop, deadline, cfq, bfq, fiops, sio, fifo, sioplus, tripndroid, vr, zen
- TCP: westwood, reno, bic, cubic, highspeed, hybia, htcp, vegas, scalable, lp, yeah, ilinois
- Thermal Simple
- tuned thermal configuration
- Compiled using GCC 8.0 and Ubertc 8
- Adreno idler
- Arch Power
- Gentle fair sleepers
- Boeffla Wakelock Blocker
- USB Fastcharge
- Several subsystems converted to use power efficient workqueues
Download
Active AOSP PIE HMP ( Should also work on aosp oreo roms )
mirror
If you are experiencing crashes during games/benchmarks lower GPU frequency in kernel aduitor
744Mhz - max OC
724Mhz - high OC
654Mhz - stock frequency
INSTALLATION:
Boot to recovery
Flash kernel zip
Reboot
Yay! You've installed the kernel
1) Q: Is overclock safe?
A: I didn't touch voltage so it should be
2) Q: How can i get more battery life or performance?
A: Play around with cpu governors and frequencies
3) Q: I'm having random reboots, freezes, crashed
A: Lower your GPU frequency
4) Q: Are you Planning to support MIUI?
A: Yes, miui support will come in the future however right now miui is UNSUPPORTED
5) Q: Could you include feature x,y and z in your kernel please?
A: If i find it useful then yes
6) Q: The kernel is f*cking up my battery! Plz...
A: Stop right there. The Kernel doesn't drain any battery, use an app like BetterBatteryStats to figure out what app is screwing with your phone. If verified the clocks are always online and on the max clock, then it'll checked out what's happen. Anyway logs are necessary.
XDA:DevDB Information
[Kernel][3.18.132] Active Kernel, Kernel for the Xiaomi Mi 5s Plus
Contributors
00day
Source Code: https://github.com/00day0/idle_kernel_xiaomi_msm8996
Kernel Special Features:
Version Information
Status: Testing
Created 2019-03-06
Last Updated 2019-03-06
Special thanks to
Jonas Cardoso - for many ideas especially permissive script and init tweaks
Hlcpereira - for some ideas
nathanchance - kernel upstream
franciscofranco - many optimizations
osm0sis - AnyKernel2
LuK1337 and Mi5Devs - for making this possible
Source code:
https://github.com/00day0/idle_kernel_xiaomi_msm8996/tree/idle-pie-oc
If you want feel free to donate via PayPal https://www.paypal.me/00day0
reserved #1
Only pie support?
yoshidaharu said:
Only pie support?
Click to expand...
Click to collapse
It also should work on Oreo roms
Cool, I'm gonna try this kernel on Bootlegger rom
Fahripradityo16 said:
Cool, I'm gonna try this kernel on Bootlegger rom
Click to expand...
Click to collapse
Bootleggers doesn't support any hmp kernel
Don't know if it's related but the whatsapp audio bug in Syberian has increased. =/
hello, i have installed one Kernel from Jonas Cordoso. What is the right way to install this kernel? Dirty Flash?
What cpu&gpu governors combo you find best for performance and battery life?
trutta said:
hello, i have installed one Kernel from Jonas Cordoso. What is the right way to install this kernel? Dirty Flash?
Click to expand...
Click to collapse
Dirty flash your current rom
Then flash this kernel
Thanks for releasing the kernel for 5s plus
By the way, will you continue to update the Mi 5s Plus rom in the future?
Because seeing your signature written to "Mi 5s Plus - RIP"
does it support stock miui 10 rom based on oreo 8.0 ?
ddrulze said:
does it support stock miui 10 rom based on oreo 8.0 ?
Click to expand...
Click to collapse
"4) Q: Are you Planning to support MIUI?
A: Yes, miui support will come in the future however right now miui is UNSUPPORTED"
Did you read that Q&A ? lol
root
00day said:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
- Kernel upstream 3.18.132
- KCAL
- GPU OC ( 744Mhz )
- Tuned GPU frequencies table
- CPU OC ( 2,4Ghz )
- CPU Governors: alucard, nightmare, elementalx, smartmax, lionfish, darkness, impulse, wheatley, blu_active, nebula, despair, interactive, conservativex, conservative, onemand, userspace, powersave, bioschock, lionheart, performance
- I/O Schedulers: noop, deadline, cfq, bfq, fiops, sio, fifo, sioplus, tripndroid, vr, zen
- TCP: westwood, reno, bic, cubic, highspeed, hybia, htcp, vegas, scalable, lp, yeah, ilinois
- Thermal Simple
- tuned thermal configuration
- Compiled using GCC 8.0 and Ubertc 8
- Adreno idler
- Arch Power
- Gentle fair sleepers
- Boeffla Wakelock Blocker
- USB Fastcharge
- Several subsystems converted to use power efficient workqueues
Download
Active AOSP PIE HMP ( Should also work on aosp oreo roms )
mirror
If you are experiencing crashes during games/benchmarks lower GPU frequency in kernel aduitor
744Mhz - max OC
724Mhz - high OC
654Mhz - stock frequency
INSTALLATION:
Boot to recovery
Flash kernel zip
Reboot
Yay! You've installed the kernel
1) Q: Is overclock safe?
A: I didn't touch voltage so it should be
2) Q: How can i get more battery life or performance?
A: Play around with cpu governors and frequencies
3) Q: I'm having random reboots, freezes, crashed
A: Lower your GPU frequency
4) Q: Are you Planning to support MIUI?
A: Yes, miui support will come in the future however right now miui is UNSUPPORTED
5) Q: Could you include feature x,y and z in your kernel please?
A: If i find it useful then yes
6) Q: The kernel is f*cking up my battery! Plz...
A: Stop right there. The Kernel doesn't drain any battery, use an app like BetterBatteryStats to figure out what app is screwing with your phone. If verified the clocks are always online and on the max clock, then it'll checked out what's happen. Anyway logs are necessary.
XDA:DevDB Information
[Kernel][3.18.132] Active Kernel, Kernel for the Xiaomi Mi 5s Plus
Contributors
00day
Source Code: https://github.com/00day0/idle_kernel_xiaomi_msm8996
Kernel Special Features:
Version Information
Status: Testing
Created 2019-03-06
Last Updated 2019-03-06
Click to expand...
Click to collapse
i want to root bootlegger rom.i was try magisk and supersu and ı cant flash root.what can ı do?
It works but sadly it doesn't work on FGO so i'll try to use an custom kernel if it'll work on FGO for now i'll stick with the stock kernel.
John Cruz said:
It works but sadly it doesn't work on FGO so i'll try to use an custom kernel if it'll work on FGO for now i'll stick with the stock kernel.
Click to expand...
Click to collapse
In this case, I'm facing too in princess re:connect, is always detect root even use hide magisk option. Simply, just delete folder patch on zip. Then re-flash your rom include this kernel, you need to clean install.
yoshidaharu said:
In this case, I'm facing too in princess re:connect, is always detect root even use hide magisk option. Simply, just delete folder patch on zip. Then re-flash your rom include this kernel, you need to clean install.
Click to expand...
Click to collapse
I've actually did an fresh install there is no os on my phone and flashed los,gapps,active kernel and lastly magisk. So you mean that after I've flashed the rom I'll need to redo it again to work?
John Cruz said:
I've actually did an fresh install there is no os on my phone and flashed los,gapps,active kernel and lastly magisk. So you mean that after I've flashed the rom I'll need to redo it again to work?
Click to expand...
Click to collapse
Did you Hide Magisk Manager before? If the problem still there, just delete patch folder on active kernel zip. Then clean install.
Wipe all (system, data, cache) and data( type yes) in twrp, then flash the rom, firmware, rom, gapps, active kernel and magisk.
After boot up try to hide FGO or other japan games, if still detect, try to Hide Magisk Manager then clear data FGO apps, then run again.
yoshidaharu said:
Did you Hide Magisk Manager before? If the problem still there, just delete patch folder on active kernel zip. Then clean install.
Wipe all (system, data, cache) and data( type yes) in twrp, then flash the rom, firmware, rom, gapps, active kernel and magisk.
After boot up try to hide FGO or other japan games, if still detect, try to Hide Magisk Manager then clear data FGO apps, then run again.
Click to expand...
Click to collapse
I'll try it again some time since I'm testing Resurrection Remix for few days. Btw what rom do you use or recommend?