Pokemon GO 0.3.7 and MIUI 8 6.9.8 - Xiaomi Redmi 2 Questions & Answers

I'm trying to run Pokemon GO on the MIUI 8 with MultiROM, since it's unplayable on the CM13 ROM. but when I try to start the game, it gives this error on the screenshot attached. has anyone had this? I researched about it and couldn't find anything about MIUI 8 not being able to run this game.

Same problem

do full unroot ...then only pokemon go 0.37 will work...
this pokemon go update is having root check and then they terminate the app so that no root user can use any fake gps type and cheating app...
---------- Post added at 08:14 AM ---------- Previous post was at 08:13 AM ----------
khaotik said:
I'm trying to run Pokemon GO on the MIUI 8 with MultiROM, since it's unplayable on the CM13 ROM. but when I try to start the game, it gives this error on the screenshot attached. has anyone had this? I researched about it and couldn't find anything about MIUI 8 not being able to run this game.
Click to expand...
Click to collapse
do full unroot

saurabh1234 said:
do full unroot ...then only pokemon go 0.37 will work...
this pokemon go update is having root check and then they terminate the app so that no root user can use any fake gps type and cheating app...
---------- Post added at 08:14 AM ---------- Previous post was at 08:13 AM ----------
do full unroot
Click to expand...
Click to collapse
yeah, did a full unroot here and it worked, thanks!

how unroot
How to do full unroot? I buy device and did only official updates, but Poke 0.3.7. refuse to run.
khaotik said:
yeah, did a full unroot here and it worked, thanks!
Click to expand...
Click to collapse

xdrm0001 said:
How to do full unroot? I buy device and did only official updates, but Poke 0.3.7. refuse to run.
Click to expand...
Click to collapse
Are you sure your phone is rooted? did you buy it second hand or brand new? because it doesn't come rooted from factory. anyway, if you are rooted there will be an app called supersu installed on it. on it's configurations, there's an option to remove root. I don't believe that's your case if the phone is brand new, but you can try it anyway.

Related

NEW to Verizon note 3....not new to note 3...i have a few ????

i have a few concerns about this note 3 from verizon
1. OTA wont stop updating....wifi, or on network! 12 noon every day it wants me to install kitkat...
2. from what i can tell, kitkat is not working well....something about battery life and the file transfer from sd card to phone does not work right? anything else im missing
3. if i want to keep 4.3, im guessing root is my only option?
4. the phone has some serious lag on sometimes...my tmobile note 3 was smooth and flawless and worked without any issues. is this normal or do i just need to root and install a better rom?
Deny the update! Whatever you do.
talonzme said:
Deny the update! Whatever you do.
Click to expand...
Click to collapse
i do. every single freaking day. but at 12 noon it downloads something large then asks me to update! running up my damn data! daily i hit install later and at 1am not 1pm. why is it downloading the same damn file every single day???
I think it deletes the temp file for the install. If I remember correctly I saw something on xda on disabling the update
---------- Post added at 04:42 PM ---------- Previous post was at 04:40 PM ----------
Try this article, http://forum.xda-developers.com/showthread.php?t=2753732
talonzme said:
I think it deletes the temp file for the install. If I remember correctly I saw something on xda on disabling the update
Click to expand...
Click to collapse
i saw something about that but i dont have a "software update" thing in my apps under ALL to disable. unless its called something else SDM only gives option to force stop, but not disable.
That is as far as I got. I went ahead with the root and new kernel
talonzme said:
That is as far as I got. I went ahead with the root and new kernel
Click to expand...
Click to collapse
looks like ill have to do this as well. what kernel rom combo did you use
I used the BeansTown instructional and Rom. http://forum.xda-developers.com/showthread.php?t=2787627
talonzme said:
I used the BeansTown instructional and Rom. http://forum.xda-developers.com/showthread.php?t=2787627
Click to expand...
Click to collapse
ah thats kitkat...i dont want kitkat lol
i just rooted...disabled the damn ota and deleted the file. im happier now!
Lol. I already had kk so I was kind of stuck. Although the new Rom does work better than the stock kk
tackleberry23 said:
ah thats kitkat...i dont want kitkat lol
i just rooted...disabled the damn ota and deleted the file. im happier now!
Click to expand...
Click to collapse
There's other things out there that can make KitKat work like a charm
Sent from my GalaxyAwesome

OUYA app works and asking for superuser

The other day I installed the MO0205-TS update (THREAD LINK). Everything went fine and afterwards I used the towel root to restore root access. Earlier today I loaded up the new ouya app to see if it was working, and its up and running. The weird thing is that it asked for root, I decided to deny it until I figure out why and to see if it would work without it. I will be honest, I am not sure how the ouya guys feel about users having root. I would really like an explanation for this.
It installed everything and I was able to setup an account and access some games with no problems. The way it works I would compare it to the amazon app store + a launcher. All the Ouya games I downloaded show up in the normal launcher and run no problems so far. When I look through the release notes, it indcates to me that not every ouya game can be installed to the mojo.
towelroot v3 doesn't work in my mojo. It blocks my mojo. How did you do it?
Elnef said:
towelroot v3 doesn't work in my mojo. It blocks my mojo. How did you do it?
Click to expand...
Click to collapse
Initially I had root before the latest update. After the update I lost root, however I still had the supersu app installed. What I did was i installed towel root v1. Now google services will try to prevent the side load by saying something like "This app is not safe, It will compromise security" or "its not secure, don't do it". Just tell it to install anyways. Load up the towel root app and follow the instructions. It will automatically reboot the mojo and then it will be done.
I had root and superSU too.
Could you give me a Towelroot V1 link? Because V3 doesn´t work.
Elnef said:
I had root and superSU too.
Could you give me a Towelroot V1 link? Because V3 doesn´t work.
Click to expand...
Click to collapse
https://dl.dropboxusercontent.com/u/3477448/tr1.apk
goodBEan said:
https://dl.dropboxusercontent.com/u/3477448/tr1.apk
Click to expand...
Click to collapse
Restricted Content
This file is no longer available.
Any chance you can repost or point to another active link? The Towelroot.com website has version 3 (which doesn't work on the M.O.J.O.)
---------- Post added at 09:05 PM ---------- Previous post was at 08:18 PM ----------
P901 said:
Restricted Content
This file is no longer available.
Any chance you can repost or point to another active link? The Towelroot.com website has version 3 (which doesn't work on the M.O.J.O.)
Click to expand...
Click to collapse
I found version one on a Chinese website (orsoon.com) and thanks to Google Translate was able to download and install it. Once you've installed it it's a one click operation so you don't need to know Chinese to get it to work. Failing with version 3 helped with the Chinese interface though, otherwise I would have been all
P901 said:
Restricted Content
This file is no longer available.
Any chance you can repost or point to another active link? The Towelroot.com website has version 3 (which doesn't work on the M.O.J.O.)
---------- Post added at 09:05 PM ---------- Previous post was at 08:18 PM ----------
I found version one on a Chinese website (orsoon.com) and thanks to Google Translate was able to download and install it. Once you've installed it it's a one click operation so you don't need to know Chinese to get it to work. Failing with version 3 helped with the Chinese interface though, otherwise I would have been all
Click to expand...
Click to collapse
you just did one of the possibly worst things you could do. towelroot.com is run by geohot and has an apk that has been reviewed by many security folks, some random chinese repacking could come with malware and do unknown things to your device.
shabbypenguin said:
you just did one of the possibly worst things you could do. towelroot.com is run by geohot and has an apk that has been reviewed by many security folks, some random chinese repacking could come with malware and do unknown things to your device.
Click to expand...
Click to collapse
I still have the original Towelroot v1, rooted my verizon s5 when it first came out. used it to root my madcatz mojo. newest version of towelroot (v3) doesnt work.
https://diegomejia.globat.com/android/towelroot/tr1.apk
Root One Click
http://forum.xda-developers.com/mad...ojo-towelroot-one-click-t2799712/post53784258
shabbypenguin said:
you just did one of the possibly worst things you could do. towelroot.com is run by geohot and has an apk that has been reviewed by many security folks, some random chinese repacking could come with malware and do unknown things to your device.
Click to expand...
Click to collapse
You're right. My mojo doesn't have any personal data on it though, and I did sniff around the site before pulling it down. I am a noobie though and new here so I should have been a little more careful about what I posted. I'll be watching my device extra hard now to see if it does anything funny.
Any reason Ouya asks for Superuser? I've blocked it, and didn't plan to use it anyway.
mejdam said:
I still have the original Towelroot v1, rooted my verizon s5 when it first came out. used it to root my madcatz mojo. newest version of towelroot (v3) doesnt work.
https://diegomejia.globat.com/android/towelroot/tr1.apk
Click to expand...
Click to collapse
This worked in my MOJO.
Thank you very much.
Welcome back fullscreen!!
P901 said:
Restricted Content
This file is no longer available.
Any chance you can repost or point to another active link? The Towelroot.com website has version 3 (which doesn't work on the M.O.J.O.):
Click to expand...
Click to collapse
The hell, that has never happened to me before. I guess I should of put it in a zip.
hmm ouya everywere without towerfall ?
hmm anyone knows why there is no towerfall in ouya store

Nougat Coming Today - OTA added!!

As per HTC USA twitter,
Android Nougat will begin rolling out to the unlocked #HTCOneM9 starting late this evening. Carrier variants to follow early next year.
Click to expand...
Click to collapse
Source: Twitter
Ready to flash ZIP file:
http://forum.xda-developers.com/showpost.php?p=70004129&postcount=123
Thanks to @Kartoffelrudi
Get the OTA Zip from here:
http://forum.xda-developers.com/showpost.php?p=69953879&postcount=23
Thanks to @andrewia
Easiest way to install is:
Restore TWRP Backup. Seems to work even on unlocked sprint.
Get the backup from HERE
Instructions on how to restore:
1. Download the rar, extract it to your PC.
2. Boot to recovery mode, take a backup of just the boot.
3. Mount USB Storage in TWRP, and connect to PC.
4. Navigate to TWRP - Backups - HT5xxx - 2016xxx
5. Delete the stuff
6. Copy the extracted stuff (ensure that the file format of your sd card is exfat)
7. Restore using TWRP
Its recommended to factory reset.
ROOT:
Easiest way to root is by using Magisk.
Instructions:
1. Install Magisk v9 by flashing the zip in TWRP. Reboot.
2. Install Magisk Manager.
3. Open Magisk Manager - Downloads - phh's SuperUser
4. Reboot to Recovery, flash phh's SuperUser zip
5. Reboot, and install phh's SuperUser from PlayStore.
You may use Magisk Manager to disable root for Pokemon, or Google Pay.
It's downloading on my M9 as I type this! The update version is 4.14.617.6, and the size of the OTA is 1.21 GB.
Hai Karate said:
It's downloading on my M9 as I type this! The update version is 4.14.617.6, and the size of the OTA is 1.21 GB.
Click to expand...
Click to collapse
Gah! I'm in the northeast US still haven't got it yet. I wonder if I should clear cache or something I keep checking every 5 min!
edit: And I get the update 3 seconds after I post this lol
---------- Post added at 12:45 AM ---------- Previous post was at 12:42 AM ----------
I hope this brings battery improvements. Getting an average of 2hrs 45min SOT no matter what I do. Worse than lollipop.
Is this the last official update? Or maybe we get 7.1.1?
i see from internet
con_sau_may_tinh said:
i see from internet
Click to expand...
Click to collapse
It's not mentioned but I guess it includes Sense 8 ?
fhartane said:
It's not mentioned but I guess it includes Sense 8 ?
Click to expand...
Click to collapse
Not mentioned. But hopefully.
Let's see what the users who have updated has to say.
Nothing on the ROM downloads page yet, should be at this link once it's up if the URL scheme is the same: http://dl3.htc.com/application/RUU_HIMA_UL_M60_SENSE70_ATT_MR_NA_Gen_Unlock_4.14.617.6.exe
---------- Post added at 11:26 PM ---------- Previous post was at 11:26 PM ----------
If anyone can use ADB to capture the OTA URL, we would really appreciate it! It should look something like this old link: http://fotadl.htc.com/OTA_HIMA_UL_L....32.617.30_release_439080bgi83v6gaebkl3on.zip
andrewia said:
Nothing on the ROM downloads page yet, should be at this link once it's up if the URL scheme is the same: http://dl3.htc.com/application/RUU_HIMA_UL_M60_SENSE70_ATT_MR_NA_Gen_Unlock_4.14.617.6.exe
---------- Post added at 11:26 PM ---------- Previous post was at 11:26 PM ----------
If anyone can use ADB to capture the OTA URL, we would really appreciate it! It should look something like this old link: http://fotadl.htc.com/OTA_HIMA_UL_L....32.617.30_release_439080bgi83v6gaebkl3on.zip
Click to expand...
Click to collapse
I don't have the correct SKU and don't have the time for flashing the needed firmware. However, if you need an alternative to ADB: Method 1 from this post can be used with the M9, too.
yeah after RUU dev editon, i'm check update and got it
babu.rajiv2007 said:
As per HTC USA twitter,
Source: Twitter
Click to expand...
Click to collapse
M9 Developer Edition have Nougat http://i.imgur.com/cQMeI1t.jpg
babu.rajiv2007 said:
Not mentioned. But hopefully.
Let's see what the users who have updated has to say.
Click to expand...
Click to collapse
I just completed updating. It is 99% sense 8. The only difference I'm seeing is that the quick setting shade retains the same shade of grey.
Good news: navbar icons are aosp-like now, double tap to quick switch between apps work, multiwindow works and you can change the dpi in settings like in aosp nougat. Also, the default theme closely resembles the htc10's (same wallpaper?).
So I've got a ViperOneM9 5.3.0 rom and I can't get the OTA...can I flash it manually?
How?
finish
---------- Post added at 03:40 PM ---------- Previous post was at 03:36 PM ----------
Crackfreak said:
So I've got a ViperOneM9 5.3.0 rom and I can't get the OTA...can I flash it manually?
How?
Click to expand...
Click to collapse
go back to stock (stock RUU of developer edition) and check update
link ruu of dev
http://dl3.htc.com/application/RUU_HIMA_UL_M60_SENSE70_ATT_MR_NA_Gen_Unlock_3.35.617.31.exe
con_sau_may_tinh said:
finish
---------- Post added at 03:40 PM ---------- Previous post was at 03:36 PM ----------
go back to stock (stock RUU of developer edition) and check update
link ruu of dev
http://dl3.htc.com/application/RUU_HIMA_UL_M60_SENSE70_ATT_MR_NA_Gen_Unlock_3.35.617.31.exe
Click to expand...
Click to collapse
Thanks a lot man...U rock?
---
Kartoffelrudi said:
I just received the OTA for the developer edition in Germany, will try to flash with FlashFire since i use systemless root.
If it works, i will keep you updated.
Click to expand...
Click to collapse
So in that case ,you don't have to go back to stock?
I'm rooted but S-On... does that affect the process?
Should I turn S-Off first?
( too many questions I know?... not noob tho...just new to HTC dev)
How do u change the DPI for muktiwindoe? I see no option in settings
---
Can anyone post some screenshots?
I reset my M9 to the latest RUU and there is a minor update before Nougat, here's the captured OTA URL: http://fotadl.htc.com/OTA_HIMA_UL_M....35.617.21_release_486262q8itc31r2y2o2ht9.zip

Sprint Update Available

I checked and seen that I have a download from Sprint...I wasn't sure if I was going to be this soon because I flashed from unlocked. Guess I'll test it out too before going back to stock unlocked...lol...
Edit: U2BQJB Update Firmware is available here:
https://forum.xda-developers.com/showpost.php?p=74087340&postcount=1
So this is just a minor config update to get ready for a major update later...this one improves connectivity and polishes hidden settings...still no calling plus
BlueFox721 said:
So this is just a minor config update to get ready for a major update later...this one improves connectivity and polishes hidden settings...still no calling plus
Click to expand...
Click to collapse
What do you mean, polishes hidden settings? I'm prob not taking the update.
so I'm guessing if I take this update I won't be able to root later if an exploit is found, right?
---------- Post added at 07:31 AM ---------- Previous post was at 07:30 AM ----------
Death-Dealer said:
What do you mean, polishes hidden settings? I'm prob not taking the update.
Click to expand...
Click to collapse
Sammy/Sprint speak for we're closing root holes
No I think this is more for connectivity
The connectivity issues are security issues with bluetooth and malware.
Issues with spen? Air command doesn't work. Under spen settings it's grayed out.
seoulbrova said:
Issues with spen? Air command doesn't work. Under spen settings it's grayed out.
Click to expand...
Click to collapse
Not for me...try to
1. reboot, if not fix
2. boot in recovery and clear cache, if not fix
3. Cache and data, if all else fails, sometimes updates are screwy and we need to
4. Factory reset...I hope you don't have to do that. I only reset after major updates...use Helium to backup your apps first (that's what I use)...sorry S Pen is having issues for you
Before any of that find the spen app or settings app and clear that cache and data or reset just the settings of your phone under the general management section
seoulbrova said:
Issues with spen? Air command doesn't work. Under spen settings it's grayed out.
Click to expand...
Click to collapse
works fine here
is there a dedicated sprint note 8 forum?
SayWhat10 said:
is there a dedicated sprint note 8 forum?
Click to expand...
Click to collapse
https://forum.xda-developers.com/sprint-galaxy-note-8
Here you go
Anyone with the patch try to root or vice vera?
cocokola said:
Anyone with the patch try to root or vice vera?
Click to expand...
Click to collapse
You can still root with this update...root involves combo factory binary...when new update comes you can flashify the system img and Odin cp and csc...check out the comments in root thread in main dev section
it funny when we just have root how they want to push for an update lol
---------- Post added at 02:33 PM ---------- Previous post was at 02:32 PM ----------
im not updating until 8.0 comes to are phone next year
New update, BQJB, breaks root so if you plan on keeping root or rooting later do not take update, if you do not care about root, update as it plugs security holes...and updates to 2nd version bootloader...geting ready to drop Oreo in Jan or Feb...

Note 8 Oreo

Hey guys thought I could start this any news on Oreo coming to T-Mobile Note 8?? Post all news here thanks guys
I asked tmobile and samsung mobile I was redirected to support page for os Nougat on tmobile website.. Nothing else new.
Samsung announced that the Note 8 will get Oreo, the time line has not been said.
Oreo Beta
https://www.reddit.com/r/GalaxyNote8/comments/7ibsip/android_oreo_ota_this_is_real/
Been running this since yesterday. Only issue I've come across is that I can't allow unknown sources. Other than that it's ok so far. Truly nothing groundbreaking about it compared to the latest official update.
Sent from my SM-N950U using Tapatalk
deh2002 said:
Been running this since yesterday. Only issue I've come across is that I can't allow unknown sources. Other than that it's ok so far. Truly nothing groundbreaking about it compared to the latest official update.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
Whaaa! That means that pretty soon we'll all be rolling in the bask of Oreo. Can't wait for the official update to roll out. [emoji2]
Sent from my [device_name] using XDA-Developers Legacy app
I installed the Oreo beta and don't like it. Want to go back to stable. I downloaded the original firmware AQH9 and have tried flashing in ODIN, but am getting a SHA256 failure error...
EDIT: Solved by using newer BQJA firmware to flash back to.
Oreo is running great! I didnt even have to use ODIN. (2) Update.zip(s) and a Factory Reset and i am good to go!
*edit*
BQJ1(N) to BQK2(N) Update.zip DOWNLOAD
and then
BQK2 to CQL1(Oreo) Update.zip DOWNLOAD
for T-Mobile Samsung Galaxy Note8 on BQJ1
---------- Post added at 08:02 PM ---------- Previous post was at 07:49 PM ----------
Nitemare3219 said:
I installed the Oreo beta and don't like it. Want to go back to stable. I downloaded the original firmware AQH9 and have tried flashing in ODIN, but am getting a SHA256 failure error...
EDIT: Solved by using newer BQJA firmware to flash back to.
Click to expand...
Click to collapse
Yea because AQH9 is on Bootloader 1 and BQJA is on Bootloader 2
---------- Post added at 08:14 PM ---------- Previous post was at 08:02 PM ----------
I added links to the update.zip files needed to update your N950U to Oreo
Where did you get BQJA firmaware? I couldnt find it on Sammobile.
daviddem said:
Where did you get BQJA firmaware? I couldnt find it on Sammobile.
Click to expand...
Click to collapse
https://www.sammobile.com/firmwares/galaxy-note8/SM-N950U/TMB/
Samsung Connect seems to have a bug and Android webview keeps force closing but Oreo Beta seems pretty cool otherwise..
Nitemare3219 said:
I installed the Oreo beta and don't like it. Want to go back to stable. I downloaded the original firmware AQH9 and have tried flashing in ODIN, but am getting a SHA256 failure error...
EDIT: Solved by using newer BQJA firmware to flash back to.
Click to expand...
Click to collapse
What didn't you like about it? I was considering it
Eternalty said:
What didn't you like about it? I was considering it
Click to expand...
Click to collapse
Some Substratum theme options weren't yet working. A few random force closes. Security Log agent messages from some apps. Lag in the notification shade when playing Spotify (so possibly any media). It's not like Oreo is a big upgrade, so I'm not in a rush to get it.
Nitemare3219 said:
Some Substratum theme options weren't yet working. A few random force closes. Security Log agent messages from some apps. Lag in the notification shade when playing Spotify (so possibly any media). It's not like Oreo is a big upgrade, so I'm not in a rush to get it.
Click to expand...
Click to collapse
I just got this phone two days ago and have been away from the forums for over 2 years. Root is available for BQJA if I read correctly. Is that right? I just want root for substratum. Downloaded it from the Play Store and it's offering me to buy an add on for "supported Samsung"
Eternalty said:
What didn't you like about it? I was considering it
Click to expand...
Click to collapse
Eternalty said:
I just got this phone two days ago and have been away from the forums for over 2 years. Root is available for BQJA if I read correctly. Is that right? I just want root for substratum. Downloaded it from the Play Store and it's offering me to buy an add on for "supported Samsung"
Click to expand...
Click to collapse
You don't need root for Substratum. The $1.99 add-on does work and is probably required.
deh2002 said:
Been running this since yesterday. Only issue I've come across is that I can't allow unknown sources. Other than that it's ok so far. Truly nothing groundbreaking about it compared to the latest official update.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
You can, but only by using the built in "my files" app.. Also go to settings>apps then tap the dots in the top right and tap special access and look at the bottom of the list. Do you see install unknown apps?
I hope they fix the theming issues, half of the icons get the stupid white border/frame. even when you turn off icon frames its stays. its the biggest reason why I switched back. This Beta is really stale this year. I have it on my s8 to and I'm not really impressed
Deleted, nvm. Lol
AndroidDevices said:
Oreo is running great! I didnt even have to use ODIN. (2) Update.zip(s) and a Factory Reset and i am good to go!
*edit*
BQJ1(N) to BQK2(N) Update.zip DOWNLOAD
and then
BQK2 to CQL1(Oreo) Update.zip DOWNLOAD
for T-Mobile Samsung Galaxy Note8 on BQJ1
---------- Post added at 08:02 PM ---------- Previous post was at 07:49 PM ----------
Yea because AQH9 is on Bootloader 1 and BQJA is on Bootloader 2
---------- Post added at 08:14 PM ---------- Previous post was at 08:02 PM ----------
I added links to the update.zip files needed to update your N950U to Oreo
Click to expand...
Click to collapse
I'm on BQJA. Can I still update with these?
Sent from my SM-N950U using Tapatalk
MicroMod777 said:
I'm on BQJA. Can I still update with these?
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
Yes, that is the build that this is for....

Categories

Resources