Hi,
I'm on Marshmallow with ALE-21. I wanted to unroot to install Magisk. I used the SuperSU full unroot and ended up in a bootloop. I restored a months old backup via TWRP, and know I lost my IMEI...
Can anyone help me restore it ?
flash your current firmware.. that should restore it back
Excellent, it worked ! Many Thanks to you !!
Hub00 said:
Excellent, it worked ! Many Thanks to you !!
Click to expand...
Click to collapse
Glad to help you
Hub00 said:
Hi,
I'm on Marshmallow with ALE-21. I wanted to unroot to install Magisk. I used the SuperSU full unroot and ended up in a bootloop. I restored a months old backup via TWRP, and know I lost my IMEI...
Can anyone help me restore it ?
Click to expand...
Click to collapse
About Magisk, i have installed it and it work great also with xposed systemless ...
But at least for me work only on original firmware when i tried to use it on sokkoban rom it doens not work aniway could be my mistake
xander33 said:
About Magisk, i have installed it and it work great also with xposed systemless ...
But at least for me work only on original firmware when i tried to use it on sokkoban rom it doens not work aniway could be my mistake
Click to expand...
Click to collapse
You're right, you can only install Magisk on a stock ROM. It works fine for me on B574 (updated through OTA).
I needed to unroot to play PokemonGO, but athe same time, I needed to root to enable gyroscope, to play PokemonGo...
Related
Finally... i made it WORKS
Thats the way i ROOT my 14.6.A.0.368 firmware with LOCKED bootloader.
1. Installed KingRoot V4.6.0 128 and rooted with it
2. Installed Super-Sume Pro v9.1.9 and this program replaced KingRoot with SuperSU
3. Downloaded Z1C-lockeddualrecovery2.8.22-RELEASE.flashable.zip <- This is not mistake, you need FLASHABLE version... yes i know you don't have active recovery to flash it.
4. Install Flashfire from http://flashfireapk.com/ and flash the recovery zip with it...
5. Enjoy
P.s. may be you will need RIC Disabler/Killer also... i have installed it before, but doesn't noticed it do something
Please thank or just write something to approve this works for you
OLD: "Hello there. After update with Sony PC Companion i have lost my root access. Today KingRoot rooted my phone again... now it time to install dual recovery and back to SuperSU.
Cheers
UPDATE: I have replaced KingRoot SU app with help of Super-Sume Pro v9.1.9 and now i have SuperSU installed and working fine, but... still can't use Z1C-lockeddualrecovery2.8.22-RELEASE.installer or XZ-lockeddualrecovery2.8.22-RELEASE.installer. They installed fine, but after reboot phone show RED light WITHOUT vibration and no matter i press UP or DOWN i can't enter recovery and boots android."
OdhinnBG said:
Hello there. After update with Sony PC Companion i have lost my root access. Today KingRoot rooted my phone again... now it time to install dual recovery and back to SuperSU.
Cheers
Click to expand...
Click to collapse
What version? Do you have a link? So far, I haven't heard of Kingroot working on 5.1. Also, do you know if 'kingroot to SuperSU' script works with it?
levone1 said:
What version? Do you have a link? So far, I haven't heard of Kingroot working on 5.1. Also, do you know if 'kingroot to SuperSU' script works with it?
Click to expand...
Click to collapse
Version of KingRoot V4.6.0 128 still trying to take SuperSU. Dual Recovery installed but cant enter with UP button. NDR Utils was installed via Z1C-lockeddualrecovery2.8.22-RELEASE.installer. We have nice start to find the answer
Update: Read the first post
WORKS on 14.6.A.1.216 LOCKED bootloader.
1. Installed KingRoot V4.6.0 128 and rooted with it, reboot.
2. Installed Super-Sume Pro v9.1.9 and replaced KingRoot with SuperSU
3. Update SuperSU binary, do not reboot
4. Install Flashfire from http://flashfireapk.com/ and flash the recovery Z1C-lockeddualrecovery2.8.22-RELEASE.flashable.zip with it...
All credits to @OdhinnBG
Hi!
I'm on rooted Z1 Compact with locked bootloader 5.1.1 LP 14.6A.0.368. I was first time rooted the phone from 5.02 LP with KingRoot. Then after Sony released 5.1.1 i have flashed a PreRooted 5.1.1 without loosing my data.
I want to know that if i'm OTA updating to 14.6.A.1.216 and the try your toturial it will work without loosing my data, apps, etc.
Thanks!
ejay_gl said:
Hi!
I'm on rooted Z1 Compact with locked bootloader 5.1.1 LP 14.6A.0.368. I was first time rooted the phone from 5.02 LP with KingRoot. Then after Sony released 5.1.1 i have flashed a PreRooted 5.1.1 without loosing my data.
I want to know that if i'm OTA updating to 14.6.A.1.216 and the try your toturial it will work without loosing my data, apps, etc.
Thanks!
Click to expand...
Click to collapse
If you are rooted you cannot OTA update. You can update via PC Companion without losing anything (I'm not quite sure though) than root with Kingroot.
Best regards,
Coempi
Coempi said:
If you are rooted you cannot OTA update. You can update via PC Companion without losing anything (I'm not quite sure though) than root with Kingroot.
Best regards,
Coempi
Click to expand...
Click to collapse
Yes, ota doesn't work. Thanks for your reply.
But then i was telling myself to risk a bit and folowing the tutorial that i was using from updating from 14.5.A.0.270 to 14.6A.0.368 and it works without loosing any data.
I've just followed your steps and rooted my Z1C with stock 14.6.A.1.216. Everything works like a charm. Many thanks @OdhinnBG and @dulehak
How can i update from 216 to 236 without loosing root?
Just install prerooted via recovery
dulehak said:
WORKS on 14.6.A.1.216 LOCKED bootloader.
1. Installed KingRoot V4.6.0 128 and rooted with it, reboot.
2. Installed Super-Sume Pro v9.1.9 and replaced KingRoot with SuperSU
3. Update SuperSU binary, do not reboot
4. Install Flashfire from http://flashfireapk.com/ and flash the recovery Z1C-lockeddualrecovery2.8.22-RELEASE.flashable.zip with it...
All credits to @OdhinnBG
Click to expand...
Click to collapse
Works on .236 locked too !!
Nice summary
elshur said:
Works on .236 locked too !!
Nice summary
Click to expand...
Click to collapse
For me not work on .236
I have installed KingRoot at first then SuperSume and the app told me to restart the phone and now it is just reloading the Logo and restarting ... It is bricked ...How can I fix this
m7vm7v said:
I have installed KingRoot at first then SuperSume and the app told me to restart the phone and now it is just reloading the Logo and restarting ... It is bricked ...How can I fix this
Click to expand...
Click to collapse
First try wipe caches in recovery, that might fix it.
Works on .236 !! Thank you !
Bricked z1 compact
m7vm7v said:
I have installed KingRoot at first then SuperSume and the app told me to restart the phone and now it is just reloading the Logo and restarting ... It is bricked ...How can I fix this
Click to expand...
Click to collapse
Same happened to me today. How did you managed to solve the problem?
maadiS said:
Same happened to me today. How did you managed to solve the problem?
Click to expand...
Click to collapse
I've downloaded the ftf file through the lastet flashtool and flashed only the system.sin so its unrooted again and there is no bootloop. ready for an other try
csx3 said:
I've downloaded the ftf file through the lastet flashtool and flashed only the system.sin so its unrooted again and there is no bootloop. ready for an other try
Click to expand...
Click to collapse
See the end of this post for possible supersume alternatives. http://forum.xda-developers.com/showpost.php?p=65004634&postcount=2
mine work on .236 (using KingRoot v4.8.1)
but the problem is, Super-Sume stuck on first stage "Processing, please wait.."
any idea?
Chainfire has developed a new SuperSu Update zip, Version 2.60 and newer 2.61.
with using this update zip, you will not need a custom kernel for getting root in future, works fine on F, FY Model on Android 5.1.1 (tested).
many, many THX to one of best worldwide developer!
This method will work on many othere phones, please read threads for more infos!
First read here: http://forum.xda-developers.com/app...ersu-v2-05-t2868133/post64161544#post64161544
then download latest SuperSu Update zip here: http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
Changelog here: http://forum.xda-developers.com/showpost.php?p=23427824&postcount=3
very easy to use:
Install Stock Samsung based FW with stock bootloader etc...
Install latest TWRP
Use TWRP to install latest SuperSU Zip
Attention: If TWRP tells you SuperSU is not installed, and asks you to install it, do not do it, you will break things!
many thanks to developers!!!!!! Great new thing!!!!
Petteri said:
Chainfire has developed a new SuperSu Update zip, Version 2.60 and newer 2.61.
with using this update zip, you will not need a custom kernel for getting root in future, works fine on F, FY Model on Android 5.1.1 (tested).
many, many THX to one of best worldwide developer!
This method will work on many othere phones, please read threads for more infos!
First read here: http://forum.xda-developers.com/app...ersu-v2-05-t2868133/post64161544#post64161544
then download latest SuperSu Update zip here: http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
Changelog here: http://forum.xda-developers.com/showpost.php?p=23427824&postcount=3
very easy to use:
Install Stock Samsung based FW with stock bootloader etc...
Install latest TWRP
Use TWRP to install latest SuperSU Zip
Attention: If TWRP tells you SuperSU is not installed, and asks you to install it, do not do it, you will break things!
many thanks to developers!!!!!! Great new thing!!!!
Click to expand...
Click to collapse
so can i install xposed without flashing kernel?
Does this work with N915A?
Aggiefury101 said:
Does this work with N915A?
Click to expand...
Click to collapse
Please let me know if you are able to root it. I am wondering if other universal rooting methods work with this phone.
Everything worked fine, you don`t need wondering...it`s Chainfire who developes here! Schould work on all phones (inkluding A VErsion) from Android Lolliopop and higher!
mtayabkk said:
so can i install xposed without flashing kernel?
Click to expand...
Click to collapse
You could of already done that. I flashed xposed and it worked without root. Just flash in custom recovery
Darth-Kadd said:
You could of already done that. I flashed xposed and it worked without root. Just flash in custom recovery
Click to expand...
Click to collapse
without ROOT ? how
No issues with latest stock firmware on 915G. Thanks. ?
mtayabkk said:
without ROOT ? how
Click to expand...
Click to collapse
Trust me, I've done it without root. I had xposed installed before with root then I flashed the latest stock rom from n915w8 and flashed xposed right after without wiping data and it worked. I guess it was because the xposed modules were already configured but ultimately, I did not root in order to use xposed. The functionality of xposed is increased if you root. This is from my experience
The latest xposed for Samsung probably has some loop hole I'm unaware of that allows you to install it without root.
Petteri said:
Everything worked fine, you don`t need wondering...it`s Chainfire who developes here! Schould work on all phones (inkluding A VErsion) from Android Lolliopop and higher!
Click to expand...
Click to collapse
the boot-loader is not unlocked for n915a currently, how can we install twrp? or you mean install supersu by odin without twrp?
step 2... Install latest twrp... How can you do that if your phone has never been rooted before?
for my note edge sprint (915p) i used CWM cos twrp didnt work. after flashing supersu said i dont have root access and if i would like to have it. I SELECTED NO. after rebooting once phone booted fine. took a while for supersu to take over things and now its all good
Petteri said:
Chainfire has developed a new SuperSu Update zip, Version 2.60 and newer 2.61.
with using this update zip, you will not need a custom kernel for getting root in future, works fine on F, FY Model on Android 5.1.1 (tested).
many, many THX to one of best worldwide developer!
This method will work on many othere phones, please read threads for more infos!
First read here: http://forum.xda-developers.com/app...ersu-v2-05-t2868133/post64161544#post64161544
then download latest SuperSu Update zip here: http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
Changelog here: http://forum.xda-developers.com/showpost.php?p=23427824&postcount=3
very easy to use:
Install Stock Samsung based FW with stock bootloader etc...
Install latest TWRP
Use TWRP to install latest SuperSU Zip
Attention: If TWRP tells you SuperSU is not installed, and asks you to install it, do not do it, you will break things!
many thanks to developers!!!!!! Great new thing!!!!
Click to expand...
Click to collapse
Do you by any chance have the latest twrp (2.8.0.7) in .tar file? I've been lurking around for a while now and I'm not able to find it. I can only find .img and I need Linux to convert it to .tar to be able to Odin. I've lost root and now I can't get it back.
Osaab said:
for my note edge sprint (915p) i used CWM cos twrp didnt work. after flashing supersu said i dont have root access and if i would like to have it. I SELECTED NO. after rebooting once phone booted fine. took a while for supersu to take over things and now its all good
Click to expand...
Click to collapse
ok now that ive spent more time with it i believe the root i got is incomplete. on many apps supersu dialogue doesnt pop and they dont recognize the phone as rooted. i used titanium backup to try and remove system apps and despite everything going fine the apps didnt go anywhere
UPDATE: problem fixed. I edited the build.prop in /system/ using a build.prop editor and now all my apps are asking for root
In build.prop look for ro.securestorage.support=True and set it to False
Also solves if your phone keeps forgetting the wifi passwords
It works. SM-915F. Just don't forget to off 'reactivation lock' in security tab in androud in order to install TWRP successfuly. Thanks a lot!
No you're right. Twrp is in img format but you can easily convert it to tar using a linux emulator. Took me minutes to convert it to tar. Google "how to convert img to tar. Running twrp fine
Does it work in 915V ??
So,it's strange how the method works on my 915f. For example; Titanium Backup can't remove systems apps. It looks like I have a root, but not fully operated. Any advices?
Does this still trip the knox counter?
I want to root, but I must keep my warranty as this N915F is on my company's name.
benna said:
Does this still trip the knox counter?
Click to expand...
Click to collapse
Yes. Knox tiked(((
Hi, Can someone please help, I must have done something wrong. Flashed official 4.1.6 update through twrp successfully, but lost root, tried to flash super su again (ver 2.86), but got stuck in boot, logo froze.
Flashed 4.1.6 again, phone works but no root still.
Is that a wrong super su version or did I do something else wrong?
Help will be really appreciated.
Regards
After flashing a full update you'll always have to reflash your root solution. I guess you mean SuperSU v2.82...
Use the official 2.82, found here (there's a link to the flashable zip). There's also a link to a version to try if you're experiencing bootloops.
You could also try the release candidate, found here.
Magisk all the way
1. Wipe data
2. Flash ROM
3. Flash root package, either SuperSU or Magisk
4. Reboot
I see no reason why wouldn't this work for you
Didgeridoohan said:
After flashing a full update you'll always have to reflash your root solution. I guess you mean SuperSU v2.82...
Use the official 2.82, found here (there's a link to the flashable zip). There's also a link to a version to try if you're experiencing bootloops.
You could also try the release candidate, found here.
Click to expand...
Click to collapse
Hi,
Many thanks.
Before proceeding, should the super su app also be removed from phone?
Regards
dua999 said:
Hi,
Many thanks.
Before proceeding, should the super su app also be removed from phone?
Regards
Click to expand...
Click to collapse
When you flash the rom it will already be uninstalled
sakumaxp said:
When you flash the rom it will already be uninstalled
Click to expand...
Click to collapse
I think, I was not able to explain, Rom is already there, but I just flashed 4.1.6 update, and root was gone.
Just wanna avoid all those data backup, restore, register all new banking apps etc, it time consuming and painful.
I am pretty sure, root can be restored, when I have an unlocked bootloader, twrp recovery working properly.
SuperSU is still there in apps but can't open as says, root not available. However, can uninstall this if that is required.
Cheers
dua999 said:
I think, I was not able to explain, Rom is already there, but I just flashed 4.1.6 update, and root was gone.
Just wanna avoid all those data backup, restore, register all new banking apps etc, it time consuming and painful.
I am pretty sure, root can be restored, when I have an unlocked bootloader, twrp recovery working properly.
SuperSU is still there in apps but can't open as says, root not available. However, can uninstall this if that is required.
Cheers
Click to expand...
Click to collapse
You can try to uninstall it through supersu app but make sure to keep you boot img. Then your phone will be fully unrooted, go into twrp and reflash supersu/magisk
sakumaxp said:
You can try to uninstall it through supersu app but make sure to keep you boot img. Then your phone will be fully unrooted, go into twrp and reflash supersu/magisk
Click to expand...
Click to collapse
Thanks all for help, all sorted
Hello
Im new here. I just want to ask you how can i root my lg spirit. Everything doesnt work and im newbie. Can you help me please ?
Are you on Marshmallow right now? If yes, you need to go to lolipop, root the phone, unlock the bootloader, flash stock Marshmallow through TWRP and flash a root package like SuperSU.
Fobos531 said:
Are you on Marshmallow right now? If yes, you need to go to lolipop, root the phone, unlock the bootloader, flash stock Marshmallow through TWRP and flash a root package like SuperSU.
Click to expand...
Click to collapse
Yes im on marshmallow. Can you explain me how to do it step after step ?
Kenez92 said:
Yes im on marshmallow. Can you explain me how to do it step after step ?
Click to expand...
Click to collapse
Im on lollipop now 5.0..1. I rooted my phone and installed botloader.
What now ?
Kenez92 said:
Im on lollipop now 5.0..1. I rooted my phone and installed botloader.
What now ?
Click to expand...
Click to collapse
Now, you can install TWRP app from Playstore and download the latest twrp-3.1.1-0-c70n.img available for us. Then, download Flashify app and flash that .img downloaded.
Thus, you'll have a TWRP installed on your phone, from wich you'll able to flash wathever you want.
I did everything but after flashing v20b and supersu v2.78 i just lost root :/ why ?
but i rooted my phone by kingoroot cuz when i rooted it on kingroot than twrp always leave a message "fail flash"
Kenez92 said:
I did everything but after flashing v20b and supersu v2.78 i just lost root :/ why ?
but i rooted my phone by kingoroot cuz when i rooted it on kingroot than twrp always leave a message "fail flash"
Click to expand...
Click to collapse
If TWRP app is not working then try flashify.
Finally i rooted my phone and installed v20b. Should i install something else ? something faster and better ?
Hi,
Today I try to install MIUI 11 by OTA.
But at the installation, i've the error update.zip failed and canceled the process.
My phone is an MI9T, unlocked and root.
I thought to install it by TWRP, but i can't find the rom file.
Did you have somes advices to solve this problem ?
Thanks in advance.
Try to uninstall root, I had the same issue and without root it worked without an issue...
robi10101298 said:
Try to uninstall root, I had the same issue and without root it worked without an issue...
Click to expand...
Click to collapse
Okay I will try.
Stupid question, but how did you uninstall root pls ?
Spy20 said:
Okay I will try.
Stupid question, but how did you uninstall root pls ?
Click to expand...
Click to collapse
Download magisk uninstaller and flash it via twrp.
Don't install the ota update twrp tho
Benfatica said:
Download magisk uninstaller and flash it via twrp.
Don't install the ota update twrp tho
Click to expand...
Click to collapse
I just clicked on uninstall and it worked...
all day long I encountered several problems, so the phone did not want to start on the rom anymore.
so after a few galley factory reset then reinstall MIUI10 with save and next finally upgrade to MIUI 11 I hope
thanks for your advices again