Just got this done. I had a V1.3 charge port board. Tried a replacement V1.4 board ($55) without success. Sent my V1.3 board to Pomeroy Computing in Pompano Beach. FL. Charged me $30 and returned the board with a new jack within a week. Can't ask for better than that!
I replaced my USB connector with one i bought off ebay for a little over $1
removed old one with solder wick and solder on new.
search ebay for:
Charger Port Connector For Asus Google Nexus 7
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I just heated up the old solder and touched up the contacts with some new solder. My port that wasn't charging is now charging. I guess over time the solder contacts break from pushing in and out the usb cable.
Just in the interest of being thorough, the N7 jack itself (not the solder points) may also be "too loose" so to speak. I've found that the majority of USB micro connectors are smaller than my N7's USB jack, so they do not seat securely once plugged in.
One fix, dismantle the N7 and bend the jack itself. Another solution: bend your cables' connectors -- the trick is to expand a cable's USB micro connector slightly with a jewler's screwdriver. Still another, some nylon cables I've bought from China fit snugly.
-Pie
Related
Hi guys. Need help here. My ipaq won't charge even with te original usb cable.
It seems that the usb port is damaged - it charges only when i put a piece of paper in the mini usb connector so the pins of the connector are pressed against the ones on the usb port on the device. I guess they use too soft pins and they got deformed. Can anyone help me fix that. My device has no warranty.
I don't know if it is easy to change but this is what you have to buy :
http://www.repairhppda.com/product_info.php?pName=connector-for-synccharging-problems-for-610-612-614&cName=select-your-ipaq-model-ipaq-600-series
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yep. That's the part. I found it later after I wrote the post. I guess I'll have to make a paypal account after all. Thank you thouugh. In the local service center they said they will fix it fo 15USD but I have to provide the spare part.
Any idea why this part has broken down? Is it possible to fix it without repacing it?
it sounds like either the small clip inside the USB port has snaped, or bent.
If its snapped, then theres very little holding it on so best to get it replaced
If its bent, then it may be possible for you to bend it the other way so it makes a stronger contact tot he USB plug. It will still be weaker than originally.
I have the exact same problem. The weird thing is that it still syncs and I can use WM5torage. I got around it by buying a cheap extra battery + external battery charger combo.
Anyone seen a cable converter to allow me to charge the Raphael from a 12V car battery when there is no access to a cigarette lighter socket?
Thus, aligator clips (or similiar) that connect to the +/- terminals of a 12V battery, and then the other end has the mini-usb connector that plugs into the Raphael. Seemingly in the middle between the two would be a 12V to 5V step down.
Anyone seen such a cable? I guess I could get a standard cigarette lighter style and break it apart and solder on some aligator clips?
um.. that would most probably result in a mini explosion that will cause your fuze to go up in flames and clouds of dark ozone destroying smoke... and maybe for you to lose a hand in the process.... I highly suggest you find a different alternative...
just my 2 cents..
go to walmart and find something like this. plugging directly to a battery is a very bad idea.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Get a cigarette lighter extension and cut off the male end. Put gator clips on the wires to the female end. Works awesome.
Be careful to get hot and ground correct.
Try one of these adapters "Lighter Socket Alligator Clips". Obviously you'll still need a HTC (or suitable) cigarette lighter charger. Only about USD6.00.
Cheers!
Good morning folks.
Problemstatement
I have been using a Nextdrive Spectra (micro usb version) with my Note 3 to improve the audio quality. It's noticably better.
Unfortunately the Nextdrive Spectra has a regular micro Usb connector and our Note 3 has the Usb 3 micro Usb connector. This has the effect that the micro usb connector has sideways play. The USB Dac often looses connection because of this. It worked at the beginning, but now after a month's use it's basically unusable as long as I don't hold the phone in my hand or position it somewhere and don't touch it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Idea
I was thinking of taking the circuit board out of the Spectra and putting it into the slot of the SPen. It should fit. If it doesn't fit I have an 6000 mAh battery which doubles the thickness of the phone so I have even more space "to make it fit".
I would need a hardware switch to disconnect the Spectra as it draws a lot of power when it's connected. Even if there is no audio output connected.
Does anyone know if I can charge the Note 3 while I have the Spectra turned on?
Implementation
Take Spectra out of enclosure
Put Spectra circuit board into Spen slot
Solder USB wires of Spectra onto charging board of Note 3
Add hardware switch to enable/disable Spectra DAC
Can this work?
Has anyone here done a Mod like this before?
Alternative
Replace micro USB connector with micro USB 3 connector. But not as "cool". I like modding hehe.
I have a project where I am making a tablet wall mounted (and removable) together with wireless charging (QI Charging).
The tablet is purchased, which I selected specifically because it has a plastic back, and it is also easy to open up.
I bought this QI Receiver:
https://www.amazon.com/CUSORIENT-Wireless-Charger-Receiver-OnePlus/dp/B0713ST47Z
It has the best reviews about power output (the bad reviews on Amazon is about the connector breaking off which doesn't matter to me, as I will solder it internally).
This is the internals of the tablet, the red ring shows where I will place the the QI Receiver coil, and the blue is the cable routing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have tested the QI receiver with the tablet using a USB cable and it works fine, it charges. But there is a heat issue. The coil gets really really hot, to hot to touch with your hand. And this worries me, as I will place the QI receiver directly on the battery inside the unit.
I have seen several projects with phones and internal qi receivers and they are all placed above the battery so it seems to work.
Still the battery inside the tablet has warning labels not to exceed 60 degrees celcius.
So I am thinking if it is possible to use either copper tape or aluminum tape on the battery to shield it from the heat, and then place the QI coil above this.
Any ideas?
Bought this phone as a secondary phone 8 month ago,,
And the USB Port has loosen up...
I bought the phone unofficially so no official service will offer service for me,
Can't I just change the USB C port to a new one?
All the available USB Logic board here are without the fast charging IC
I had this phone and swapped THREE charging boards. It keeps having the same issue and nothing will work. Tried different chargers too. I think this is just a flaw in the design of charging board. I unfortunately had to recycle the device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The replacement charging board I received was different from the original.
And this is how I charged phone overnight for the contact with the board to keep charging the phone, otherwise it wouldn't charge at all even if the cable was jammed all the way in.
mucitel1 said:
I had this phone and swapped THREE charging boards. It keeps having the same issue and nothing will work. Tried different chargers too. I think this is just a flaw in the design of charging board. I unfortunately had to recycle the device.
The replacement charging board I received was different from the original.
And this is how I charged phone overnight for the contact with the board to keep charging the phone, otherwise it wouldn't charge at all even if the cable was jammed all the way in.
Click to expand...
Click to collapse
The available charging board here isn't good quality by looking,
I didn't opened the phone yet and I guess it's the USB female socket's issue, will changing this help a bit?
Sent from my Xperia 1 II using XDA Labs