Hello guys,
long time i had no problem (even that i couldnt make photos , use google play and had 4GB max space). I accidentaly erased system and through posts here i got custom chinese ROM with twrp(PLK-C00B618_Kangvip;EMUI 3.1; android 5.1.1). But now i want to make photos and use google play soo...any solutions ? I hope yes.
Thank you guys atleast for viewing this post.
You need to flash Google Framework and Google Play app, because most Chinese ROM removed those. You can flash a gapps package from Opengapps.
ARM-Android 5.1-Micro/Pico/Nano should do.
First get back to stock and then flash a custom ROM, this might help. Steps are below, follow them.
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
NOTE: If the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e Putting the UPDATE.APP from which you extracted the files in dload folder of your external SDCARD and pressing Vol UP + Vol DOWN + Power button simultaneously after switching off your phone.
Thank you, just got time to try it so ill inform in 2h(slow download speed).
OMG!! man, tell me your adress so i can visit you and hug you, i tried so many times according to lot of posts and it havent worked. I gave up once, but now i finally, god bless, finally back to stock firmware, yaaaaaaaaaaaaaaay. Iam so happy, nothing can breaky my happiness for today.
Dont know why but i have only 4GB allocated storage(before accidental system remove i had 10). Can you help me with that too ?
Pixell9 said:
Dont know why but i have only 4GB allocated storage(before accidental system remove i had 10). Can you help me with that too ?
Click to expand...
Click to collapse
Did you flashed the UPDATE.APP again with three button reset method??
DigiGoon said:
Did you flashed the UPDATE.APP again with three button reset method??
Click to expand...
Click to collapse
Yes I did.
Pixell9 said:
Yes I did.
Click to expand...
Click to collapse
Those who followed this method didn't have this kinda problem.
Try to flash a custom ROM and see if anything changes.
---------- Post added at 01:02 AM ---------- Previous post was at 12:21 AM ----------
To flash custom ROM, you need to unlock your bootloader first, then flash TWRP recovery, and download any custom ROM of your choice and flash it via TWRP recovery.
DigiGoon said:
Those who followed this method didn't have this kinda problem.
Try to flash a custom ROM and see if anything changes.
---------- Post added at 01:02 AM ---------- Previous post was at 12:21 AM ----------
To flash custom ROM, you need to unlock your bootloader first, then flash TWRP recovery, and download any custom ROM of your choice and flash it via TWRP recovery.
Click to expand...
Click to collapse
Sorry that i havent responded for some time, but i dont have now much time, ill try it tommorow. Thx.
Pixell9 said:
Dont know why but i have only 4GB allocated storage(before accidental system remove i had 10). Can you help me with that too ?
Click to expand...
Click to collapse
Usually because partition is corrupted.
Reflash again boot, recovery, cust and system img files.
If still persists go down to B100 ROM and use its img files.
DigiGoon said:
Those who followed this method didn't have this kinda problem.
Try to flash a custom ROM and see if anything changes.
---------- Post added at 01:02 AM ---------- Previous post was at 12:21 AM ----------
To flash custom ROM, you need to unlock your bootloader first, then flash TWRP recovery, and download any custom ROM of your choice and flash it via TWRP recovery.
Click to expand...
Click to collapse
zinko_pt said:
Usually because partition is corrupted.
Reflash again boot, recovery, cust and system img files.
If still persists go down to B100 ROM and use its img files.
Click to expand...
Click to collapse
Thank you guys both, i just tried to manual flash update.app again through EMUi and it worked ^^.
Pixell9 said:
Thank you guys both, i just tried to manual flash update.app again through EMUi and it worked ^^.
Click to expand...
Click to collapse
No problem. Factory reset is also very important.
Pixell9 said:
Thank you guys both, i just tried to manual flash update.app again through EMUi and it worked ^^.
Click to expand...
Click to collapse
Glad it worked for you.
Related
After updating my e700h to stock 5.1.1 i had rooted it successfully using KingRoot
Now I need to flash xposed framework zip file that needs a custom recovery
I tried TWRP for kitkat and it didnt work
I even tried a lolipop compatible CWM for E5 and it was very funny and useless
So can anyone compile any custom recovery for E7 running 5.1.1
Here's the img file of the stock recovery
mega.nz/#!ocoThQ7A
Thanks
hashiesh said:
After updating my e700h to stock 5.1.1 i had rooted it successfully using KingRoot
Now I need to flash xposed framework zip file that needs a custom recovery
I tried TWRP for kitkat and it didnt work
I even tried a lolipop compatible CWM for E5 and it was very funny and useless
So can anyone compile any custom recovery for E7 running 5.1.1
Here's the img file of the stock recovery
mega.nz/#!ocoThQ7A
Thanks
Click to expand...
Click to collapse
It will be available soon and could you upload boot and recovery to google drive or devhost.
nepalbiraj said:
It will be available soon and could you upload boot and recovery to google drive or devhost.
Click to expand...
Click to collapse
Uploaded, Check them out & help us giving custom recovery
https://drive.google.com/folder/d/0B_8xPQyhA4WxRHRkNWFZYnZUblU/edit
nepalbiraj said:
It will be available soon and could you upload boot and recovery to google drive or devhost.
Click to expand...
Click to collapse
Thanks a lot ... I tried to reply to your post but unforunately I'm less than 10 posts old
Here are the files
https //) drive.google.com/a/hashiesh.com/folderview?id=0BxgiSTfvJheVYm04MUo5NmdBcDg&usp=sharing
Thanks a lot
Me too. Please make cusTom recovery for e7 running 5.1.1
Waiting for the recovery guys please help!
i tried the custom recovery in this link
http://forum.xda-developers.com/gal...ry-twrp-touch-recovery-sm-e700-t3267563/page5
but after flashing through flashify i got stuck on logo...
my device is E700H running 5.1.1
what should i do to make twrp work?
crimson35th said:
i tried the custom recovery in this link
http://forum.xda-developers.com/gal...ry-twrp-touch-recovery-sm-e700-t3267563/page5
but after flashing through flashify i got stuck on logo...
my device is E700H running 5.1.1
what should i do to make twrp work?
Click to expand...
Click to collapse
Try the lollipop twrp it has been built last night heres the thread http://forum.xda-developers.com/showthread.php?t=3267563
Press thanks if it works for you
---------- Post added at 12:14 PM ---------- Previous post was at 12:08 PM ----------
hashiesh said:
After updating my e700h to stock 5.1.1 i had rooted it successfully using KingRoot
Now I need to flash xposed framework zip file that needs a custom recovery
I tried TWRP for kitkat and it didnt work
I even tried a lolipop compatible CWM for E5 and it was very funny and useless
So can anyone compile any custom recovery for E7 running 5.1.1
Here's the img file of the stock recovery
mega.nz/#!ocoThQ7A
Thanks
Click to expand...
Click to collapse
This recovery will not be funny I swear?here it is https://www.androidfilehost.com/?fid=24369303960682868 and the thread link http://forum.xda-developers.com/gal...recovery-twrp-touch-recovery-sm-e700-t3267563
@duonglam @rahulsajilekha @crimson35th
Press thanks if it works for you.
need help plzz
nepalbiraj said:
Try the lollipop twrp it has been built last night heres the thread http://forum.xda-developers.com/showthread.php?t=3267563
Press thanks if it works for you
---------- Post added at 12:14 PM ---------- Previous post was at 12:08 PM ----------
This recovery will not be funny I swearhere it is https://www.androidfilehost.com/?fid=24369303960682868 and the thread link http://forum.xda-developers.com/gal...recovery-twrp-touch-recovery-sm-e700-t3267563
@duonglam @rahulsajilekha @crimson35th
Press thanks if it works for you.
Click to expand...
Click to collapse
how to falsh .img using odin ??
Hatem hesham said:
how to falsh .img using odin ??
Click to expand...
Click to collapse
You can flash it with the app Flashify or I have just uploaded the odin flashable zip . So that it can be flashed directly. I suggest to use the odin method.
it keeps rebooting into recovery
nepalbiraj said:
You can flash it with the app Flashify or I have just uploaded the odin flashable zip . So that it can be flashed directly. I suggest to use the odin method.
Click to expand...
Click to collapse
I installed the recovery using odin
whenever I want to restart my mob. it keeps rebooting to the recovery menu ??!!
what do i do?
this is my 2nd attempt
i reflashed my stock rom then flashed the cfroot and then the img file and i get recovery loop
which part did i do wrong? i did the reflashing of stock cuz i was expecting that it would go smoothly with freshly flashed stock rom
Hatem hesham said:
I installed the recovery using odin
whenever I want to restart my mob. it keeps rebooting to the recovery menu ??!!
Click to expand...
Click to collapse
It looks like a bug. Meanwhile you can try to flash stock recov again and do it all over again. This time flash the twrp with odin and uncheck auto reboot and reboot it manually.
And avoid rebootinh to recovery from the system. Boot to recovery only through the hardware buttons. (3 button combo) volume up+home button+power button.
And the restart button is volume down+power long press it.
---------- Post added at 01:55 AM ---------- Previous post was at 01:52 AM ----------
crimson35th said:
what do i do?
this is my 2nd attempt
i reflashed my stock rom then flashed the cfroot and then the img file and i get recovery loop
which part did i do wrong? i did the reflashing of stock cuz i was expecting that it would go smoothly with freshly flashed stock rom
Click to expand...
Click to collapse
Reflash twrp with auto reboot option off. Follow the instructions I gave to hashem.
it worked !!
nepalbiraj said:
It looks like a bug. Meanwhile you can try to flash stock recov again and do it all over again. This time flash the twrp with odin and uncheck auto reboot and reboot it manually.
And avoid rebootinh to recovery from the system. Boot to recovery only through the hardware buttons. (3 button combo) volume up+home button+power button.
And the restart button is volume down+power long press it.
---------- Post added at 01:55 AM ---------- Previous post was at 01:52 AM ----------
Reflash twrp with auto reboot option off. Follow the instructions I gave to hashem.
Click to expand...
Click to collapse
thanks very much for ur help ... it finally worked
it worked ... thanks a lot ! looking forward for more mods
Hatem hesham said:
thanks very much for ur help ... it finally worked
Click to expand...
Click to collapse
You are most welcome:victory::victory:
---------- Post added at 02:57 PM ---------- Previous post was at 02:53 PM ----------
crimson35th said:
it worked ... thanks a lot ! looking forward for more mods
Click to expand...
Click to collapse
You're welcome. Good to hear that it works for you Press thanks.
nepalbiraj said:
It looks like a bug. Meanwhile you can try to flash stock recov again and do it all over again. This time flash the twrp with odin and uncheck auto reboot and reboot it manually.
And avoid rebootinh to recovery from the system. Boot to recovery only through the hardware buttons. (3 button combo) volume up+home button+power button.
And the restart button is volume down+power long press it.
---------- Post added at 01:55 AM ---------- Previous post was at 01:52 AM ----------
Reflash twrp with auto reboot option off. Follow the instructions I gave to hashem.
Click to expand...
Click to collapse
Sorry for replying here, I'm still below 10 posts so I cant reply to your original post
First: no words are enough to thank you for you effort. It's working and really amazing. Thanks a lot
But I noticed something: when I tried to flash a rom that I have just created, I got an error message "This rom is for e73g while this device is e5lte" I dont know whether this is a problem in my device or it's recovery related
BTW I'm trying to create a deodexed debloated stock rom
Thanks again
hashiesh said:
Sorry for replying here, I'm still below 10 posts so I cant reply to your original post
First: no words are enough to thank you for you effort. It's working and really amazing. Thanks a lot
But I noticed something: when I tried to flash a rom that I have just created, I got an error message "This rom is for e73g while this device is e5lte" I dont know whether this is a problem in my device or it's recovery related
BTW I'm trying to create a deodexed debloated stock rom
Thanks again
Click to expand...
Click to collapse
Thanks for thanking me??hashiesh.
This is not the problem of the device nor recovery. In the META-INF folder in the Rom zip there is a file names UPDATERSCRIPT. Open it in notepad++ or any other tool and remove the first 3 lines.
There should be something written assert. It checks the device name.
So remove it and you are good to go.
Attach or share the updaterscript here so that we can look at it.
After success you can share the ROM in here.
nepalbiraj said:
Thanks for thanking mehashiesh.
This is not the problem of the device nor recovery. In the META-INF folder in the Rom zip there is a file names UPDATERSCRIPT. Open it in notepad++ or any other tool and remove the first 3 lines.
There should be something written assert. It checks the device name.
So remove it and you are good to go.
Attach or share the updaterscript here so that we can look at it.
After success you can share the ROM in here.
Click to expand...
Click to collapse
Thank you for your information, I found the 3 lines of "asserts" but i'm trying to set the assert to "e5lte" and will update you if it worked.
Sure I will upload it and it will be the first time to upload a rom after years of modifying stock and custom roms without even creating a flashable zip file
I'm planning to create 3 roms
1. Stock deoedexed deknoxed rooted with busybox
2. same as 1 but debloated (I consider all samsung apps to be bloatware)
3. Will try to replace samsung core apps with google ones from stock nexus gapps
so wish me luck and remember that all these are thanks to your TWRP
nepalbiraj said:
Thanks for thanking mehashiesh.
This is not the problem of the device nor recovery. In the META-INF folder in the Rom zip there is a file names UPDATERSCRIPT. Open it in notepad++ or any other tool and remove the first 3 lines.
There should be something written assert. It checks the device name.
So remove it and you are good to go.
Attach or share the updaterscript here so that we can look at it.
After success you can share the ROM in here.
Click to expand...
Click to collapse
please check this
http://forum.xda-developers.com/galaxy-e-series/development/dev-e700h-stock-deodexed-t3293510
I'm new so please forgive me and my ignorance through all of this. I had a great root experience with my old LG G3, so when I got my Axon 7 (A2017U) I thought I'd try to root it too. I tried to follow DrakenFX's guide (http://forum.xda-developers.com/axon-7/development/wip-axon-7-root-bootloader-unlokced-t3441204) but I bit off more than I could chew. I got to the point where I had TWRP up, but this is where I think things started to fall apart. I was confused by the instructions and in a haste I continued anyway. In TWRP I went to Wipe>Format Data typed in yes like TWRP said and boom, I had no idea what happened. Rebooting only got a screen that said "Type in your password" but my passcode I had on the phone before it bricked didn't work. So by now I start panicking a bit. I thought I made a mistake earlier so I went back and tried to reinstall TWRP by putting the phone into EDL. The phone got stuck that way for a while, but I now I have it in TWRP. Right now, I just want to get back to safe stock android.
I'm 200% sure I messed with something I wasn't supposed to and I believe that is the system image(?)which Draken also linked (http://forum.xda-developers.com/showpost.php?p=68248798&postcount=53). I'm downloading it as I type. I'm going to do my best to leave my phone just like it is right now, in TWRP, and wait for more advice on this before I do anything else.. What I'm curious about is where did I go wrong and what do I need to do to get my phone working again, preferably without returning it? Thank you for any advice you have to offer.
Update: It's worth noting I didn't know to enable OEM Unlocking when I was in stock android. Dumb move I know. I'm new here.
What software version are u on?
xiong77 said:
What software version are u on?
Click to expand...
Click to collapse
As far as I know I (was) on Android 6.0 A2017U B29. TWRP version 3.0.2-0
Get DrakenFX b29 mergeboot stack and b29 stock system and flash it then u should be OK. I did this too.
xiong77 said:
Get DrakenFX b29 mergeboot stack and b29 stock system and flash it then u should be OK. I did this too.
Click to expand...
Click to collapse
I tried, but the downloads take extremely long and are unreliable for me. I was downloading the stock system file at around 14 kbps and it eventually failed. Any other suggestions?
Wipe cache dalvik data and system reboot, ignore error message and reboot
---------- Post added at 06:54 AM ---------- Previous post was at 06:53 AM ----------
Try through ur computer
---------- Post added at 06:57 AM ---------- Previous post was at 06:54 AM ----------
Try go back to twrp and wipe like the op said
xiong77 said:
Wipe cache dalvik data and system reboot, ignore error message and reboot
---------- Post added at 06:54 AM ---------- Previous post was at 06:53 AM ----------
Try through ur computer
---------- Post added at 06:57 AM ---------- Previous post was at 06:54 AM ----------
Try go back to twrp and wipe like the op said
Click to expand...
Click to collapse
I've done the wipes multiple times. It's mostly the downloads I'm having trouble with. How and where do you get them? The links I found were dead or had a slow speed.
video_dewd said:
I've done the wipes multiple times. It's mostly the downloads I'm having trouble with. How and where do you get them? The links I found were dead or had a slow speed.
Click to expand...
Click to collapse
Did you save the recovery backup? If you did then use the axon7root.exe to flash the stock recovery. Then download the stock B20 from ZTE.
tabletalker7 said:
Did you save the recovery backup? If you did then use the axon7root.exe to flash the stock recovery. Then download the stock B20 from ZTE.
Click to expand...
Click to collapse
I've been able to find some recovery images that I found on other threads. The thing is, when I try to flash them on TWRP, I get an error about "/dev/block/sde14" being read-only.
video_dewd said:
I've been able to find some recovery images that I found on other threads. The thing is, when I try to flash them on TWRP, I get an error about "/dev/block/sde14" being read-only.
Click to expand...
Click to collapse
no no no no ..................... put phone in EDL mode. Copy the stock image into the folder with the axon7root.exe file you used to flash TWRP. Make sure the stock file is named recovery.img (or whatever the TWRP file is named in that folder, it has been a long time since I did this). Then use the axon7root.exe program the exact same way you did before. It will flash the stock recovery. Then in stock recovery you can flash the B20 from ZTE
tabletalker7 said:
no no no no ..................... put phone in EDL mode. Copy the stock image into the folder with the axon7root.exe file you used to flash TWRP. Make sure the stock file is named recovery.img (or whatever the TWRP file is named in that folder, it has been a long time since I did this). Then use the axon7root.exe program the exact same way you did before. It will flash the stock recovery. Then in stock recovery you can flash the B20 from ZTE
Click to expand...
Click to collapse
Ok, I will try this.
Update: I got the stock recovery back, but now I'm lost as to how to flash the stock b20 from zte. Thank you for all your help so far though.
video_dewd said:
Ok, I will try this.
Click to expand...
Click to collapse
got stock recovery working?
tabletalker7 said:
got stock recovery working?
Click to expand...
Click to collapse
Yes, I'm in the process of getting the update from sdcard feature working.
Update: Trying to use the update.zip file or unpacking it into the sdcard hasn't worked. Trying to use adb sideload returns "Cannot read 'update.zip'"
video_dewd said:
Yes, I'm in the process of getting the update from sdcard feature working.
Click to expand...
Click to collapse
ok - download it from zte. Put it on your SD card. In recovery select update from SD card. Be warned it will work but it is slow. Also note that while I will not say the bootloader unlock doesn't work on B29, I can say it worked flawlessly on B20. If you want unlocked I recommend doing so on B20.
tabletalker7 said:
ok - download it from zte. Put it on your SD card. In recovery select update from SD card. Be warned it will work but it is slow. Also note that while I will not say the bootloader unlock doesn't work on B29, I can say it worked flawlessly on B20. If you want unlocked I recommend doing so on B20.
Click to expand...
Click to collapse
I have the zip but it says, "Sorry,you can't sdcard upgrade".
video_dewd said:
I have the zip but it says, "Sorry,you can't sdcard upgrade".
Click to expand...
Click to collapse
try using adb sideload
---------- Post added at 07:48 AM ---------- Previous post was at 07:45 AM ----------
also people reportd sucess on the z-communities by placing the B20 on the internal sd card (phone storage)
tabletalker7 said:
try using adb sideload
---------- Post added at 07:48 AM ---------- Previous post was at 07:45 AM ----------
also people reportd sucess on the z-communities by placing the B20 on the internal sd card (phone storage)
Click to expand...
Click to collapse
I tried that. It won't accept the zip file and it's unclear which file to sideload. Would you happen to know? This is what files are in the unpacked zip. https://gyazo.com/c7546c3ed0dcb0972653eaeba42fcb40
video_dewd said:
I tried that. It won't accept the zip file and it's unclear which file to sideload. Would you happen to know? This is what files are in the unpacked zip. https://gyazo.com/c7546c3ed0dcb0972653eaeba42fcb40
Click to expand...
Click to collapse
Maybe - I'd have to download it to find out. If you can't get stock recovery to take it this post http://forum.xda-developers.com/showpost.php?p=69434328&postcount=17 gives you instructions on what lines to remove from the updater-script to make it flash in TWRP (I didn't have a problem making the stock B20 go in stock recovery, but I was unlocked at the time). You could reflash TWRP and try that.
Or just try this in TWRP http://forum.xda-developers.com/showpost.php?p=68873482&postcount=2
tabletalker7 said:
Maybe - I'd have to download it to find out. If you can't get stock recovery to take it this post http://forum.xda-developers.com/showpost.php?p=69434328&postcount=17 gives you instructions on what lines to remove from the updater-script to make it flash in TWRP (I didn't have a problem making the stock B20 go in stock recovery, but I was unlocked at the time). You could reflash TWRP and try that.
Or just try this in TWRP http://forum.xda-developers.com/showpost.php?p=68873482&postcount=2
Click to expand...
Click to collapse
I'm going to try the first option. The second option's link take horrendously long to download.
Update: Trying to flash from TWRP results in error "Could not find 'META-INF/com/google/android/update-binary' which makes no sense since update binary is exactly where it should be.
Further Update: It seems that the problem might have been that when I compressed "update.zip" to fix "updater-script" it changed to file path by adding the title of the folder "update" to the beginning. I think that messed with the path giving the the meta-inf error.
video_dewd said:
I'm going to try the first option. The second option's link take horrendously long to download.
Update: Trying to flash from TWRP results in error "Could not find 'META-INF/com/google/android/update-binary' which makes no sense since update binary is exactly where it should be.
Click to expand...
Click to collapse
OK. How did you do that?
---------- Post added at 10:09 AM ---------- Previous post was at 09:54 AM ----------
Just suck it up and download the 2 b29 files. If it is that slow pick a different mirror
I tried to install revolution twrp for nougat and im now in bootloop please help
I Followed this guide and after i flashed the recovery.img now it starts Installing update and stucks on 5% what to do please help??
HOW TO MOUNT DATA IN NOUGAT'S RECOVERY IN ORDER TO INSTALL ZIP FILES : (Big thanks to @BadWolfYe )
1.flash twrp via fastboot
https://mega.nz/#!JNtWRRbb!b2Nor1CXg...4nIX01KCGSGiVI
2.reboot in recovery
3.Go to --> wipe --> advanced wipe---> select data --> change file system --> select f2fs
4.repeat the same instruction like in the 3rd step but SELECT ext4
5.After that recovery CAN mount data
6.flash the zip that you want
7.in recovery go to reboot-> reboot bootloader
8.flash stock nougat's recovery with fastboot
https://drive.google.com/file/d/0ByQ...RYVXdKaU0/view (thanks to @algnerd )
9. reboot to recovery and do a factory reset (if you dont do that your phone will fall in a bootloop)
10.reboot
Click to expand...
Click to collapse
You had to flash recovery.img using fastboot
Johnny TDN said:
You had to flash recovery.img using fastboot
Click to expand...
Click to collapse
i dit it like this fastboot flash recovery C:\adb\RECOVERY.img
Please I need help so much is there anything I can do to fix it??
Coolyou said:
i dit it like this fastboot flash recovery C:\adb\RECOVERY.img
Please I need help so much is there anything I can do to fix it??
Click to expand...
Click to collapse
Put the nougat file in C:/Users/(PC NAME)
Reboot your phone to fastboot
Open CMD and type fastboot flash recovery recovery.img
Johnny TDN said:
Put the nougat file in C:/Users/(PC NAME)
Reboot your phone to fastboot
Open CMD and type fastboot flash recovery recovery.img
Click to expand...
Click to collapse
I don't know how to reboot in fastboot because in adb it just saying waiting for device
Edit: It did flash last time recovery.img but after that i couldnt get into revolution to do factory reset.
I think im screwed
Coolyou said:
I don't know how to reboot in fastboot because in adb it just saying waiting for device
Click to expand...
Click to collapse
Connect the phone to the PC and hold volume down while the phone is rebooting. Done!
NICE man!!! So now what should I do?? Can you post me a link which I should download to fix the bootloop.
Coolyou said:
NICE man!!! So now what should I do?? Can you post me a link which I should download to fix the bootloop.
Click to expand...
Click to collapse
Now you must search in the forums.
Johnny TDN said:
Now you must search in the forums.
Click to expand...
Click to collapse
I mean should I install TWRP again or use recovery img?? I searched a lot of threads about those bootloops but nothing seems to help in my case
Coolyou said:
NICE man!!! So now what should I do?? Can you post me a link which I should download to fix the bootloop.
Click to expand...
Click to collapse
Coolyou said:
I mean should I install TWRP again or use recovery img?? I searched a lot of threads about those bootloops but nothing seems to help in my case
Click to expand...
Click to collapse
Reinstall the TWRP revolution recovery nougat
Johnny TDN said:
Reinstall the TWRP revolution recovery nougat
Click to expand...
Click to collapse
We are in my friend :laugh::laugh::laugh:
Now I'm in recovery TWRP, now should i flash nougat files xD or i need to do something else
Coolyou said:
We are in my friend :laugh::laugh::laugh:
Now I'm in recovery TWRP, now should i flash nougat files xD or i need to do something else
Click to expand...
Click to collapse
If i were you, i better go to MM. You will regret your choise when you stay on Nougat. Just downgrade to MM
Johnny TDN said:
If i were you, i better go to MM. You will regret your choise when you stay on Nougat. Just downgrade to MM
Click to expand...
Click to collapse
Oh I would like to do that as well.. but the tutorial is on Spanish and when translate it still things are in Spanish. I downloaded the vns-l21c66b131.. but tutorial is way too long and non-understanable for me to get it back on MM.
So in that way i would just like to fix this nougat in some simpler way, so if u have time to write me some fast way what should i do to boot from nougat recovery android.
Sorry for being boring but you dude, YOU ARE SO HELPFUL!! THANK YOU
Coolyou said:
Oh I would like to do that as well.. but the tutorial is on Spanish and when translate it still things are in Spanish. I downloaded the vns-l21c66b131.. but tutorial is way too long and non-understanable for me to get it back on MM.
So in that way i would just like to fix this nougat in some simpler way, so if u have time to write me some fast way what should i do to boot from nougat recovery android.
Sorry for being boring but you dude, YOU ARE SO HELPFUL!! THANK YOU
Click to expand...
Click to collapse
To downgrade, you must flash the OEMINFO.IMG and then flash the update.app (MM) using the 3 buttons method
Johnny TDN said:
To downgrade, you must flash the OEMINFO.IMG and then flash the update.app (MM) using the 3 buttons method
Click to expand...
Click to collapse
This oeminfo C432oEMINFO-DUALSIM-P9LITE.ZIP from Nougat TWRP? and then it should lock bootloader and i'll be able to flash update.app?? Because with 3 button method it goes into TWRP recovery
Coolyou said:
This oeminfo C432oEMINFO-DUALSIM-P9LITE.ZIP from Nougat TWRP? and then it should lock bootloader and i'll be able to flash update.app?? Because with 3 button method it goes into TWRP recovery
Click to expand...
Click to collapse
Yes. That .zip file. Flash it with TWRP. After that, put the update.app (MM) in the SD CARD in the dload folder. then use the 3 button method.
Johnny TDN said:
Yes. That .zip file. Flash it with TWRP. After that, put the update.app (MM) in the SD CARD in the dload folder. then use the 3 button method.
Click to expand...
Click to collapse
I'm in proccess of doing that my friend I hope it will work friend :fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
Edit; my default storage is not SDCARD will it work if i put dload on sdcard??
Johnny TDN said:
Yes. That .zip file. Flash it with TWRP. After that, put the update.app (MM) in the SD CARD in the dload folder. then use the 3 button method.
Click to expand...
Click to collapse
I was able to downgrade two times without flash oem once from 329 and once from 336 to mm161 wich i had before with 3 butons method .I put the 161 in dload.
Coolyou said:
I'm in proccess of doing that my friend I hope it will work friend :fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
Edit; my default storage is not SDCARD will it work if i put dload on sdcard??
Click to expand...
Click to collapse
Yes. In the micro sd card
---------- Post added at 12:39 PM ---------- Previous post was at 12:39 PM ----------
Claleale said:
I was able to downgrade two times without flash oem once from 329 and once from 336 to mm161 wich i had before with 3 butons method .I put the 161 in dload.
Click to expand...
Click to collapse
You have VNS-L21C432?
Johnny TDN said:
Yes. In the micro sd card
---------- Post added at 12:39 PM ---------- Previous post was at 12:39 PM ----------
You have VNS-L21C432?
Click to expand...
Click to collapse
Bootloader is locked now, but I can't enter in 3 buttons method (I did put on sdcard/dload/update.app)
it enters only in Huawei eRecovery
Hi there
Today I bought a pair of Bluetooth earphones and noticed that Bluetooth wasn't working anymore, so I decided to factory reset my vanilla ROM (EMUI 5.0).
That didn't work out and eventually I had to unlock the bootloader, flash a custom recovery (so far I tried both TWRP and Revolution) and a custom ROM.
However, something must have gone seriously bad because I now can't mount /product and /version.
When I try to install a rom (EliteROM by HassanMirza), it also tells me it couldn't load /cust and /data as well.
- cust: invalid argument
- data: invalid argument
- product: no such file or directory
- version: no such file or directory
I also tried moving an update.app version to my internal memory but doing that through gives me an error saying there's not enough space.
Pretty much at a loss here, no idea what to do. Anyone got an idea? Even willing to pay to get this fixed.
Can you access fastboot?
maartenw8 said:
Can you access fastboot?
Click to expand...
Click to collapse
I have access to fastboot and the Revolution recovery.
(thanks a lot in advance fellow Belgian )
LordInfernu said:
I have access to fastboot and the Revolution recovery.
(thanks a lot in advance fellow Belgian )
Click to expand...
Click to collapse
Great!! Use huawei update extractor (HERE) to extract all the .img files from the UPDATE.APP and try to flash them via fastboot.
Code:
fastboot flash system system.img
fastboot flash boot boot.img
and so on
This should help you and your phone should boot.
------
Belgium ftw . Are you from the flanders?
maartenw8 said:
Great!! Use huawei update extractor (HERE) to extract all the .img files from the UPDATE.APP and try to flash them via fastboot.
Code:
fastboot flash system system.img
fastboot flash boot boot.img
and so on
This should help you and your phone should boot.
------
Belgium ftw . Are you from the flanders?
Click to expand...
Click to collapse
I tried that yesterday, but flashing the system.img file gave an error, something like "sparse flash write failed".
Would you have any idea what the correct build would be for a Belgian VNS-L31 which was previously on EMUI 5.0.
I got my phone with a subscription from Proximus and after the update, it just completely broke (the software I mean).
I'm from Bruges! And you?
LordInfernu said:
I tried that yesterday, but flashing the system.img file gave an error, something like "sparse flash write failed".
Would you have any idea what the correct build would be for a Belgian VNS-L31 which was previously on EMUI 5.0.
I got my phone with a subscription from Proximus and after the update, it just completely broke (the software I mean).
I'm from Bruges! And you?
Click to expand...
Click to collapse
Hmmm.. Can you flash stock recovery and dload the firmware?
The build depends on your Cxxx. What is it? I also got my phone from proximus! Assuming you didn't debrand your phone, it should be C02, but maybe you did debrand. However, I would suggest trying to dload the rollback package because you were on nougat. You can find it here. Follow the instructions in the PDF file of the zip package. But first, extract the recovery from UPDATE.APP
---------------
Nice! I'm from Genk
maartenw8 said:
Hmmm.. Can you flash stock recovery and dload the firmware?
The build depends on your Cxxx. What is it? I also got my phone from proximus! Assuming you didn't debrand your phone, it should be C02, but maybe you did debrand. However, I would suggest trying to dload the rollback package because you were on nougat. You can find it here. Follow the instructions in the PDF file of the zip package. But first, extract the recovery from UPDATE.APP
---------------
Nice! I'm from Genk
Click to expand...
Click to collapse
Hmm so I've currently moved the update.app file to my external sd (if I'm correct this is the /external_sd/ folder - had to do this through adb because I don't have a card reader atm) and then tried to update by pressing on/off button, volume down, volume up. However, this just brings me back to my Revolution recovery. Should I flash the stock recovery first?
LordInfernu said:
Hmm so I've currently moved the update.app file to my external sd (if I'm correct this is the /external_sd/ folder - had to do this through adb because I don't have a card reader atm) and then tried to update by pressing on/off button, volume down, volume up. However, this just brings me back to my Revolution recovery. Should I flash the stock recovery first?
Click to expand...
Click to collapse
Yes flash stock recovery first! That way you'll have dload back
maartenw8 said:
Yes flash stock recovery first! That way you'll have dload back
Click to expand...
Click to collapse
Oh ok never gotten that far, great! So right now I did that but obviously I can't boot now.
I believe I now have to flash the full OS? Would it be ok if I flash TWRP or Revolution back just to use ADB and transfer the other update.app file, flash back to stock recovery and then use DLOAD method again?
Thanks so far for all the help, very much appreciated!
LordInfernu said:
Oh ok never gotten that far, great! So right now I did that but obviously I can't boot now.
I believe I now have to flash the full OS? Would it be ok if I flash TWRP or Revolution back just to use ADB and transfer the other update.app file, flash back to stock recovery and then use DLOAD method again?
Thanks so far for all the help, very much appreciated!
Click to expand...
Click to collapse
So you flashed the stock ROM and then you dload the Huawei Rollback package? Because if you flashed the rollback package you should be able to boot...
-----
Let me pm you to find a more easy way to communicate
maartenw8 said:
So you flashed the stock ROM and then you dload the Huawei Rollback package? Because if you flashed the rollback package you should be able to boot...
-----
Let me pm you to find a more easy way to communicate
Click to expand...
Click to collapse
Ah no I probably made a mistake. I'd definitely appreciate that!
LordInfernu said:
Ah no I probably made a mistake. I'd definitely appreciate that!
Click to expand...
Click to collapse
I sent you a message
i'm having the same problem here (also from Belgium)
anyone willing to guide me through?
thanks
Same problem here, the link to rollback package is invalid. Is there someone kind enough to help us out?
lepraook said:
i'm having the same problem here (also from Belgium)
anyone willing to guide me through?
thanks
Click to expand...
Click to collapse
What recovery are you using?
---------- Post added at 06:13 AM ---------- Previous post was at 06:13 AM ----------
VonHornmeister said:
Same problem here, the link to rollback package is invalid. Is there someone kind enough to help us out?
Click to expand...
Click to collapse
What recovery are you using?
maartenw8 said:
What recovery are you using?
---------- Post added at 06:13 AM ---------- Previous post was at 06:13 AM ----------
What recovery are you using?
Click to expand...
Click to collapse
Twrp
Exact version.have to check
Also after reflashing recovery system boot i can.reboot
I'm on android 6 now with dual.sim instead of single
Had to flash this info to phone to get him.going
lepraook said:
Twrp
Exact version.have to check
Also after reflashing recovery system boot i can.reboot
I'm on android 6 now with dual.sim instead of single
Had to flash this info to phone to get him.going
Click to expand...
Click to collapse
Hi there. I am stuck. Are you willing to help me please?
---------- Post added at 12:55 AM ---------- Previous post was at 12:28 AM ----------
LordInfernu said:
Hi there
Today I bought a pair of Bluetooth earphones and noticed that Bluetooth wasn't working anymore, so I decided to factory reset my vanilla ROM (EMUI 5.0).
That didn't work out and eventually I had to unlock the bootloader, flash a custom recovery (so far I tried both TWRP and Revolution) and a custom ROM.
However, something must have gone seriously bad because I now can't mount /product and /version.
When I try to install a rom (EliteROM by HassanMirza), it also tells me it couldn't load /cust and /data as well.
- cust: invalid argument
- data: invalid argument
- product: no such file or directory
- version: no such file or directory
I also tried moving an update.app version to my internal memory but doing that through gives me an error saying there's not enough space.
Pretty much at a loss here, no idea what to do. Anyone got an idea? Even willing to pay to get this fixed.
Click to expand...
Click to collapse
hey dude. I have a similar problem and I just can't solve it. Did you ever get your phone working again?
No network on any ROM (stock & LOS-based ROMs). I might have flashed the wrong baseband file, can someone please give me the baseband specifically for India? Baseband required - M8952_70030.25.03.62.01R ATHENE_INDIA_DSDS_CUST
meraj99 said:
I'm on RR Remix N and have TWRP 3.1.1 shreps for the recovery. I can flash RR without any issues but whenever I try flashing either a JX series ROM or a fully stock ROM, TWRP says 'Invalid Zip File Format'. I have access to both bootloader and recovery, everything else works fine. Can someone please guide me on what to do? Do I have to sideload the ROM via ADB? If so, please enlighten me about the procedure
Click to expand...
Click to collapse
Why not trying to reflash the twrp(may try another one from official website or of silesh nair on his thread).
I think you might have turn on md5 checksum or another this which keeps verifying the zip and no signature is found.
Reflashing is a good course as it do not erase any data of yours.
DgnrtnX said:
Why not trying to reflash the twrp(may try another one from official website or of silesh nair on his thread).
I think you might have turn on md5 checksum or another this which keeps verifying the zip and no signature is found.
Reflashing is a good course as it do not erase any data of yours.
Click to expand...
Click to collapse
I used 3 different versions of TWRP Still didn't help. And the MD5 checksums matched, zip signature verification has been disabled too
meraj99 said:
I used 3 different versions of TWRP [emoji14] Still didn't help. And the MD5 checksums matched, zip signature verification has been disabled too
Click to expand...
Click to collapse
Try this and report. After installing wipe cache, dalvik.
If flashing recovery is problem, reflash stock rom w/ stock recovery n boot ans try again to flash twrp, might sovle the issue
Link : https://drive.google.com/file/d/1EGS-uU1QBDbrP3G4lFUSVqDSHC_ZGpMR/view?usp=sharing
Sent from my Moto G4 Plus using Tapatalk
DgnrtnX said:
Try this and report. After installing wipe cache, dalvik.
If flashing recovery is problem, reflash stock rom w/ stock recovery n boot ans try again to flash twrp, might sovle the issue
Link : https://drive.google.com/file/d/1EGS-uU1QBDbrP3G4lFUSVqDSHC_ZGpMR/view?usp=sharing
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
can you please tell me how to use the stock recovery? It just says 'No Command' everytime I boot into it
meraj99 said:
can you please tell me how to use the stock recovery? It just says 'No Command' everytime I boot into it
Click to expand...
Click to collapse
Its power button followed by vol up, but hey that recovery ain't gonna help you. Im just saying you to reflash it as it will erase all the data of current twrp recovery which might interfere with another recovery(changes are negligible, but then too).
I gave you link to a 64-bit twrp made by dreamester and silesh nair. Try it and see if it works.
You can not flash stock ROM from TWRP or other custom recovery. You need a PC with Moto Drivers and fastboot tools installed. Then you have to flash the stock rom from fastboot (generally instructions are given inside rom zip in a file called 'flashfile.xml'). I can't say about flashing JX series ROM (maybe it needs you to be on stock first or something like that) but here are the files needed to install Motorola ADB and FASTBOOT drivers and ADB & FASTBOOT tools on windows pc:
https://firmware.center/software/Android/platform-tools/win/ and https://firmware.center/software/Motorola/
---------- Post added at 10:15 PM ---------- Previous post was at 10:11 PM ----------
meraj99 said:
can you please tell me how to use the stock recovery? It just says 'No Command' everytime I boot into it
Click to expand...
Click to collapse
To get into stock recovery press VOLUME UP while pressing and holding POWER button but you can't flash custom ROM or wipe SYSTEM from there. For that purpose use Official latest TWRP recovery from their website.
JackFrost said:
You can not flash stock ROM from TWRP or other custom recovery. You need a PC with Moto Drivers and fastboot tools installed. Then you have to flash the stock rom from fastboot (generally instructions are given inside rom zip in a file called 'flashfile.xml'). I can't say about flashing JX series ROM (maybe it needs you to be on stock first or something like that) but here are the files needed to install Motorola ADB and FASTBOOT drivers and ADB & FASTBOOT tools on windows pc:
https://firmware.center/software/Android/platform-tools/win/ and https://firmware.center/software/Motorola/
---------- Post added at 10:15 PM ---------- Previous post was at 10:11 PM ----------
To get into stock recovery press VOLUME UP while pressing and holding POWER button but you can't flash custom ROM or wipe SYSTEM from there. For that purpose use Official latest TWRP recovery from their website.
Click to expand...
Click to collapse
I already have these installed! But when I run RDS and connect my phone in fastboot mode to the computer, RDS doesn't detect it in the program. I mean, the device doesn't show up in the boxes below. But when I run 'fastboot devices' in CMD I can see my device connected. And can you pleeease tell me how to flash ROMs through the stock recovery?
meraj99 said:
I already have these installed! But when I run RDS and connect my phone in fastboot mode to the computer, RDS doesn't detect it in the program. I mean, the device doesn't show up in the boxes below. But when I run 'fastboot devices' in CMD I can see my device connected. And can you pleeease tell me how to flash ROMs through the stock recovery?
Click to expand...
Click to collapse
Stock recovery don't flash roms, thats why we use customs recovery. As he mentioned just flash the stock rom, enable usb debugging and oem unlocked. Just flash the files and again flash the recovery which ever suits you and thats it.
Note : take backup first as it wipes your internal storage.
DgnrtnX said:
Stock recovery don't flash roms, thats why we use customs recovery. As he mentioned just flash the stock rom, enable usb debugging and oem unlocked. Just flash the files and again flash the recovery which ever suits you and thats it.
Note : take backup first as it wipes your internal storage.
Click to expand...
Click to collapse
well, how do I flash...? When I try to flash using TWRP it gives the error. I've tried almost all available TWRP v3+ recoveries
meraj99 said:
well, how do I flash...? When I try to flash using TWRP it gives the error. I've tried almost all available TWRP v3+ recoveries
Click to expand...
Click to collapse
Go into bootloader and then flash the file linked below from computer.
Note : usb debugging is must.
Link : https://www.google.co.in/amp/s/foru...tock-rom-npjs25-93-14-4-march-1-t3608138/amp/
DgnrtnX said:
Go into bootloader and then flash the file linked below from computer.
Note : usb debugging is must.
Link : https://www.google.co.in/amp/s/foru...tock-rom-npjs25-93-14-4-march-1-t3608138/amp/
Click to expand...
Click to collapse
yoooo!!! IT worked! Thank you so much! ^_^
DgnrtnX said:
Go into bootloader and then flash the file linked below from computer.
Note : usb debugging is must.
Link : https://www.google.co.in/amp/s/foru...tock-rom-npjs25-93-14-4-march-1-t3608138/amp/
Click to expand...
Click to collapse
erm, my SIM isn't being detected... WiFi works fine
meraj99 said:
erm, my SIM isn't being detected... WiFi works fine
Click to expand...
Click to collapse
Just flash twrp and which ever rom you like, and see if they are working or not.
DgnrtnX said:
Just flash twrp and which ever rom you like, and see if they are working or not.
Click to expand...
Click to collapse
Not working
meraj99 said:
Not working
Click to expand...
Click to collapse
I think reflashing the stock rom is the only thing to do. Read carefully whatever is written in that thread. And see if all the commands are properly exicuted.
I dont know any work around for sim as i have never had that issue. Tell me if its solved or not for just a bit of knowledge.
Edit : just for reference you are not using moto g4 play device, are you?
Standard ROM and recovery cannot be flashed by TWRP, only in fastboot mode.
DgnrtnX said:
I think reflashing the stock rom is the only thing to do. Read carefully whatever is written in that thread. And see if all the commands are properly exicuted.
I dont know any work around for sim as i have never had that issue. Tell me if its solved or not for just a bit of knowledge.
Edit : just for reference you are not using moto g4 play device, are you?
Click to expand...
Click to collapse
nah, G4+. Problem is with the baseband
meraj99 said:
nah, G4+. Problem is with the baseband
Click to expand...
Click to collapse
I flashed that firmware 2 days ago and is working fine for me, try flashing baseband then. Idk link for it search in Google for it
DgnrtnX said:
I flashed that firmware 2 days ago and is working fine for me, try flashing baseband then. Idk link for it search in Google for it
Click to expand...
Click to collapse
that's what I'm looking for. I need the Indian baseband file, do you know where i can get it