hello
i have a redmi note 1, which have this specefications:
Model number: HM NOTE 1W
Andrdoi version : 4.4.5 JDQ39
MIUI version : MIUI-JHDCNB30.0
Kernel version: 3.4.39
Build number: JDQ39
lcsh92_wet_jb9
i want to update it to MIUI 8
so, i fownloaded the MIUI 8 rom from this link:
http://en.miui.com/download-218.html#326
and i tried to flash it from the stock recovery, i tried bothe english and global version, but i always get:
error: partition table not match
so, i tried to change recovery to TWRP, i used this:
http://en.miui.com/thread-117882-1-1.html
and now i can't enter the recovery, but the phone still enter to MIUI.
i tried also to re-flash the stock recovery (from this: http://forum.gsmhosting.com/vbb/f979/recovery-default-twrp-cwm-xiaomi-redmi-note-1895692/)and i get: partition 'recovery' not support flash)
i tried also this: https://www.youtube.com/watch?v=n_edJL4zpmA(flashing the recovery image with mobileuncle-mtk-tools)
but when entering in recovery, it always reboot and down't show the recovery
Note:
when i connect the phone to pc via usb, i just get 2gb of storage, and not 8 ot 6.
and after several uses, now i can't access the storage, neither from the file explorer in the phone, nor from the computer.
what to do now? help please
i used MTKdroidTools and it shows:
Hardware : MT6582 (MT6592 is Fake!)
Model : HM NOTE 1W
Build number : JDQ39
Build date UTC : 20140922-023141
Android v : 4.4.5
Baseband v: -----
Kernel v : 3.4.39 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Tue Aug 19 16:38:05 CST 2014
ATTENTION! Fake Hardware in kernel or firmware doesn't correspond to phone!
now, is there a way to flash a proper recovery from that tool?
and is there a way to install MIUI8 ?
Edit:
now i tried: MTKdroidTools
and i successfully flashed CWM recovery.
the problem now is that i can't copy any file to the internal phone storage (it shows no storage), is there any way to fix this?
when entering from root explorer or AndroidCommander, i just can aceess to system storage.
and when entering to sdcard0 (which must be the internal storage), i find nothing.
and AndroidCommander shows that there is data partition with 1gb, but i can't find how to access to it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
Official Firmware Stock T525XXUANAF
Samsung Galaxy TabPRO 10.1 LTE (SM-T525) - Android 4.4.2 KitKat
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Download Link : T525XXUANAF - Mirror
Features:
Model : SM-T525
Android Version : 4.4.2
Firmware : T525XXUANAF
Country / region code : Italy / ITV
Release Date : 22/01/2014
REQUIREMENT :
• Have the USB drivers installed on your computer.
• Having Odin307.zip software. Extract this file to obtain the Odin3 v3.07.exe file.
• Unzip the downloaded firmware.
• Cut antivirus protections and close Samsung Kies process.
• Having a charged battery more than 70%.
• Reminder : make a backup of your data as a precaution !
INSTALLATION :
Turn off your tablet.
Launch the Odin3_v3.07.exe file in the unzipped folder.
Make sure you have only Auto Reboot and F. Reset Time ticked.
Select the files in the rom unzipped as follows :
- Code in PDA
- Csc in CSC
- Modem in PHONE
In the case of a single file .tar ou .tar.md5, select it in PDA.
On your tablet, press both buttons Volume Down + Home + Power and Volume UP to restart your tablet download.
Connect the tablet to the computer using the original USB cable. The box below ID: COM should be colored.
You should find the Odin window like this :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click Start to begin the installation.
Wait for the setup and do not touch anything. Your tablet will reboot.
Great Job man!! :laugh:
I'm looking for the firmware of LTE 12.2" version, do you know where can I get it?
Thank you very much!
Hi
U can find on sammobile
Envoyé de mon GT-I9305 en utilisant Tapatalk
==>[ROM COOK]-GT-i9300 [E210 K/S/L]<==-Android Vesion 4.2.2- V0.9.8
ChangeLog v0.9.8 beta :
New features and a list of
Bluetooth Added: available Bluetooth device automatically scan function
optimization: distinguish Show Bluetooth devices paired devices list and connected equipment
V.9.8 Beta bug fixes list of
Contacts and call
fix: Sorting wrong question some of the contacts special names appear in the contact list: Fixthe just-machine , can not intercept calls blacklist issue
Fix:When the phone recording, cell phone memory, but no hint of a problem
fix:change horizontal and vertical screen mode causes the system to crash dial
Settings
Fix:"Settings -> Bluetooth" in the paired inconsistencies and global interface device interface details
Albums
fix:In the preview image interface, continuous rotation button leads to the album a few clicks crash
Weather
Fix:When a user starts Weather Application Language abroad could cause the phone to crash
A third party Application compatible
fix:LBE security master problem can not be used
Image :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Pros: - Beautiful new interface, fast processing speed, high-capacity battery, rapid battery charger
- Cons: Beta 1 error still functions
The experience and you can download below
Installation :
1. Use Odin to install CWM (download below)
2. In Recovery :
- Wipe data / Factory reset
- Wipe cache patition
- Wipe dalvik cache
3. Installs Rom
4. Installs Kernel
5. Wipe data / Factory reset
6. Reset phone.
Download here :
http://dl.smartisan.cn/20140219i4NTYrguGbTEI/smartisan-0.9.8-alpha-i9300-0220.zip
Download CWM :
http://up.4share.vn/f/437070767a7b7076/i9300-cwm-recovery-6.0.3.2.tar
Download the kernel patch :
K version :
http://pan.baidu.com/s/1mggBuVu
S version :
http://pan.baidu.com/s/1gdsWNf1
L version :
http://pan.baidu.com/s/1o6DHq58
info as below
Port : Fastboot Interface
Baud Rate : Not Applicable
Device : Motorola QC
Operation : Flash
Fw Model : athene
Fw Version : athene-user 6.0.1 MPJ24.139-13.1 1 release-keysM8952_205.61.03.28R
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model : XT1643
Boot Ver. : moto-msm8952-B0.0C
Baseband : M8952_70009.08.03.48R ATHENE_INDIA_DSDS_CUST
Software : Blur_Version.24.31.64.athene.retail.en.US
IMEI : Mod edited
CPU : MSM8952
RAM : 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=05 M7=00 M8=1F
EMMC : 16GB SAMSUNG QE13MB RV=08 PV=07 FV=0000000000000007
got file """"Blur_Version.24.31.64.athene.retail.en.US.zip"""" as below
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
now no recovery-so can not flash via mmc-tried to bootloader unlock-it also error as below
C:\android>fastboot oem unlock ZYGXHZPVFQIWRRR3XBOO
... (bootloader) Check 'Allow OEM Unlock' in Android Settings > Developer
(bootloader) Options
OKAY
Execution time is 15(ms)
set not turn on-then how allow oem unlock?
so what i do as a next step?
Please try to be clear, describe your problem clearly, it's hard to understand what you are saying..
I read and understand is this,
Nougat blur zip can not be flashed via FASTBOOT method... If you have corrupted Recovery or anything then just flash STOCK IMAGES...
For Bootloader unlocking ( follow Complete Guide)
-Turn on your phone,
- goto Settings > Developer options
- find Allow OEM unlock and enable it.
Same question. What are you trying to do? Your best bet it to revert back to stock images over fastboot and reread how you install the soak test. If that is what you are trying to do.
ADB Sideloader
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download
Mega
Android File Host
Instructions
1. Download ADB Sideloader from the given links
2. Run the tool in your PC (Double Click , Like opening a file)
3. Reboot your phone into Recovery Mode (TWRP)
4. In twrp go to Advance/ADB-SIDELOAD and swipe to start sideload
5. Click on Load Zip and select the flashable zip
6. After selecting flashable zip, now click on Flash
7. After flashing process over , you can see two options in twrp 1.Back , 2.Reboot System
Features
Detection - Automatically detects mobile connection status to pc and gives you status (Connected / Not Connected)
Reboot - Reboot Device with one click
Reboot Recovery - Reboot devcie to recovery mode with one click
Load Zip & Flash - Load your flashable zip and click on flash
Uses
* Some device does not detect internal storage in twrp recovery
* may face a problem insufficient storage in device
* So using this tool you can flash zips from pc directly to pc
Still Have doubts ??
You can reach me via whatsapp chat
Watch a tutorial video of flashing zip via pc with this tool in my youtube channel
Like my work offer me a coffee, no matter it may be a small cup or large cup
PayTm Donation Link
XDA:DevDB Information
ADB Sideloader By Varun, Tool/Utility for all devices (see above for details)
Contributors
Varun Sai
Version Information
Status: Stable
Current Stable Version: 1.2
Stable Release Date: 2018-06-10
Created 2018-06-10
Last Updated 2018-06-10
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Descendant is a customised Android ROM that focuses on enhancing UX and UI
over stock Android along useful features.
Downloads
Head to the download page. Download the zip and *-boot.img for your device.
Sources
Githubhttps://github.com/Descendant-Devices
Backup internal storage, wiping data will delete everything.
Reboot to fastboot and flash the provided boot.img with the following commands:
Code:
adb reboot bootloader
fastboot flash boot /path/to/*-boot.img
Reboot into recovery using volume and power buttons and select "Apply update from ADB," then:
Code:
fastboot reboot recovery
adb sideload /path/to/rom.zip
In recovery before rebooting, make sure to factory reset/wipe data on first install. No wipes are needed between updates from Descendant itself, unless specified.
Reboot into the system and you should be good.
But please, mind, we won't support any issue arising from Magisk nor relative modules.
Listing all the additions would be a huge wall of text, that you wouldn't even read.
So, head over the Telegram group and feel free to lurk.
Preloaded applications
Google Apps are included.
Having a bug or not booting for whatever reason?
Look for "How to report bugs" on this post.
Bug reports without logs will be ignored.
@phhusson | @Letzen | @krule031 | @ezio84 | @linuxct
Android OS version: 10.0.0_r32
Security patch level: March
XDA:DevDB Information
Descendant X, ROM for the Google Pixel 3a XL
Contributors
johngalt1, Dil3mm4
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Stable
Created 2020-03-09
Last Updated 2020-03-09
Error
Everytime I try to sideload it's says error 2 no update binary in zip