hi...my redmi note 3g was brick and i'm unable to install the driver to flash my redmi...i cannot install the driver because when i plug in my phone it be like connect-disconnect continuously....i've been looking for driver but all of them failed to install proper driver for my phone because when i opened the setting file, it have string like below :
[Strings]
MTK = "MediaTek Inc."
MTK6218 = "MTK USB Port"
MTK_COM = "MTK USB Modem Port"
MTK_CAT = "MTK USB Debug Port"
MTK_PRELOADER = "MediaTek PreLoader USB VCOM Port"
MTK_SP_DA = "MediaTek DA USB VCOM Port"
Serial.SvcDesc = "USB Serial emulation modem driver"
i've bolded the string which might cause the driver install failure
my redmi is MTK6592 while those driver was MTK6218
for those who have working Redmi Note 3G, please help to extract the driver and share here...i will use restore method to install the driver for flashing my redmi...
please dont ask me to download the driver that existing here because all of them have string like i mentioned...go see it for yourself...
i think that is the reason why there's like no solution for those who brick their redmi phone and cannot install the correct driver...
i'll be grateful if you can extract the installed Redmi Note 3G driver and share here...you can extract the driver using this software --> driver magician
let me try it and i will post the result here
Hello,
Please some one solve my problem
I have stock MIUI 8 developer rom right now.
problem is when I connect to pc, there is nothing shown in mobile, only shown charging..
MTP or camara option not shown in mobile.
I have MI pc suite and also attached my other REDMI 1S (it's connect to pc for my file transfer purpose)
problem is shown from MIUI 7 .. and there for I tried to upgrade to MIUI 8. (using twrp)
but my problem not solved...
please any one help me
Hi Guys.
I have one Redmi Note 3 and I am having a problem to connect it to my pcs.
Before everything was ok. I connected the USB cable and I could transfer files between my pc and the Redmi Note 3 using My Computer.
Now, I connect the Note 3 and I cannot see the storage anymore. So, it's impossible to copy anything between pc or note 3.
I checked with several cables and different ports and in two different pcs. I cannot connect with MIPC Suite either. The Note 3 recharges normally.
I believe it's a driver version problem.
I am using Windows 8 and MIUI 8.2.1.0 Stable Version.
Thanks for all help.
I got a good Asus Zenfone 2 Laser device Z011D (ZE601KL) recently.
I am not able to get the PC to even recognize that the device is connected via USB. Any hints on what to check?
I've already checked that other Android phones can connect with the same cable and PC:
[Phone] How to transfer files from phone to PC? | Official Support | ASUS Global
www.asus.com
Hi,
I am Alex and totally new to this forum and indeed the topic of unlocking, rooting and custom roms. Want to try lineage and see what works and doesn't on something not my primary phone before breaking it. Luckily I have a couple of older ones, and one is supported by lineage like my current one. I am using OpenSuSE tumbleweed, Android tools, Studio and udev rules are installed. All mentioned phones are in dev mode. Here is the problem:
My Zenfone Max m1 is not appearing in adb devices. As I tried with my other phones I found out while two (7 and 8) do appear there is also one other (4) which does not either.
All can be listed with lsusb, and the two that are not working show the same device id which I did add to the 51-android-rules file. But I must still be doing something wrong.
sudo adb devices
List of devices attached
M8AIGF007293WPD device
# Zenphone 2 (ZE500CL) (7770=adb 7773=mtp,adb 7777=ptp,adb 7775=rndis,adb,mass_storage 5F03=mtp,adb,pclink,mass_storage 5F07=ptp,adb,pclink 5F05=rndis,adb,pclink,mass_storage
ATTR{idProduct}=="7770", SYMLINK+="android_adb"
ATTR{idProduct}=="7773", SYMLINK+="android_adb"
ATTR{idProduct}=="7777", SYMLINK+="android_adb"
ATTR{idProduct}=="7775", SYMLINK+="android_adb"
ATTR{idProduct}=="5F03", SYMLINK+="android_adb"
ATTR{idProduct}=="5F07", SYMLINK+="android_adb"
ATTR{idProduct}=="5F05", SYMLINK+="android_adb"
# Zenphone 4 (581f=mtp,adb 583f=rndis,adb)
ATTR{idProduct}=="581f", SYMLINK+="android_adb"
ATTR{idProduct}=="583f", SYMLINK+="android_adb"
# Zenphone 5 (4c90=normal,4c91=debug,4daf=Fastboot)
ATTR{idProduct}=="4c91", SYMLINK+="android_adb"
ATTR{idProduct}=="4daf", SYMLINK+="android_fastboot"
# Zenfone Max M1
ATTR{idProduct}=="7772", SYMLINK+="android_adb"
# Zenfone 8
ATTR{idProduct}=="7770", SYMLINK+="android_adb"
Bus 005 Device 020: ID 0b05:7772 ASUSTek Computer, Inc. Zenfone GO (ZB500KL) (MTP mode)
Bus 001 Device 013: ID 0b05:7770 ASUSTek Computer, Inc. Zenfone 8
Doh. With fiddling around with 4 devices at the same time this is the one I forgot to set to usb dev mode....
hi.
Zenfone 4 and Max M1 and not showing in adb devices​Although USB Debug is Enable and all Drivers installed