Database Users

Unofficial OmniROM by struq & Kayant 02/02/2014

Hello struq and Kayant,
congratulations on this excellent ROM.
For me it is after many attempts with CM11 a surprise how stable and fast our Defy + can run under KitKat, even though both ROMs run on the same kernel.
Now a few more translations into German and the ROM would be perfect.
Please continue developing this ROM.
regards
Defy_Duke

Great OmniRom
It is definitely a great KitKat rom: fast and stable :good:
Thank you!

Thank you for new relase of the OmniROM.
I have only two problems:
1. No TWRP Recovery boot function (i have fix it with your ramdisk-recovery file )
2. OmniSwitch not working
the rest works fine, stable and fast.
greets

About the Question
I also noticed no deep sleep with wifi connected, do you have this too?
Click to expand...
Click to collapse
in this Thread http://forum.xda-developers.com/showthread.php?t=2614453&page=14
For me the deep sleep works fine.

Very fluid
Well this is one of the ROMs I kept longer since was so fluid but I don't know why is not updated?
Anyway super rom.

Yes, OmniROM is a super ROM for the Defy. :laugh:
There is a newer Version out (20140228), but this has an big bug in TWRP recovery boot, so is better not install this version.
I think struq is work on next version of OmniROM. :good:

well is it better than quarx ?

It has the same Kernel from Quarx and Blechdose, but struq has only stable versions of the kernelcode in his Rom.
For me is the Omnirom much more smoother and stable as CM11.

Omni for Defy March 8th version / Google Play problem
I've installed the new Omni version this morning and it is very nice! Performance of my Defy is acceptable.
I had one problem since I had a working internet connection but couldn't access Google Play. After installing 2-27_GApps_Minimal_4.4.2_signed.zip the problem was solved.
Many thanks for this ROM! Now I can use the same environment on my Nexus 7, I9305 and my old Defy.
Klaus

Thank you struq for the new version.
TWRP works fine now, no bootloops and start in TWRP works.

Works perfect for me.

Wow, i have never threy a better ROM on my Defy+.
I hope that i now have 10 post and can answer in dev. threat.

Thank you all for your awesome work.
I installed omni-4.4.2-20140308-mb526-TEST.zip and had some issues at first:
-after a dirty flash over the version 20140202, supersu (flashed via twrp) was not working
-clean flash: same error as Post #159 in original thread:
status bar, lock screen, etc doesn't appear ie system ui doesn't start
Click to expand...
Click to collapse
-another clean flash worked fine but no usb mass storage, only mtp/ptp (I am almost certain that I had us mass storage on 20140202)
did not yet try to enable it via terminal emulator
(since I am a forum newbie, I can't post in the dev-threat)

I think me have since KitKat only MTP/PTP
Fine that the new OmniROM now works on your phone. :laugh:

Yeah youre right. Went back to build 20140202 since I had some charging issues and there is only MTP/PTP too.
Maybe it was just a dream
But will stay on this one for now, feels more stable...

Omni for Defy March 11th version / Google Play problem gone
mklmkl said:
I've installed the new Omni version this morning and it is very nice! Performance of my Defy is acceptable.
I had one problem since I had a working internet connection but couldn't access Google Play. After installing 2-27_GApps_Minimal_4.4.2_signed.zip the problem was solved.
Many thanks for this ROM! Now I can use the same environment on my Nexus 7, I9305 and my old Defy.
Klaus
Click to expand...
Click to collapse
Just installed the March 11th version. Google Play now works out-of-the-box.
Nice ROM, thank you!
Klaus

What are the main differences between Quarx's CM11 and OmniRom? (...an SlimKat??) :silly:.

newer version possible
Is there maybe a chance for a new version which incorporates latest Quarx's & Omni changes?
Would be great!

dual sim bug and bluetooth

Hello,
I have a couple of problems with my Samsung Galaxy S III Duos (I9300). CM 12, CM 12.1.
1. I cannot switch to use Internet from another sim card. It always uses just one of them. I tried swapping cards, It just chooses one of them, not always sim in slot 1.
2. Problem with Bluetooth in car (BMW, CCC). When I call (incoming/outgoing call) from one sim card everything is fine. When I call from another sim, car answers the phone and shows duration of a call, but no sound.

U are using latest build?

ziad311 said:
U are using latest build?
Click to expand...
Click to collapse
I noticed these bugs when I was on CM12 or CM11 (not sure which one, November 2015 release, Android 5.0.1 if I'm not mistaken), flashed back to stock 4.4.4, both bugs disappeared, so I guess it was not a hardware problem. Then I tried CM 12.1 20151225 release, both bugs were still in the ROM, so I flashed 4.4.4 again.
Can anyone confirm if they have the same bugs or if they are known at all.
Thanks.

Flash latest cm12.1 not cm12
Android 5.1.1 not 5.0.2

ziad311 said:
Flash latest cm12.1 not cm12
Android 5.1.1 not 5.0.2
Click to expand...
Click to collapse
As I already wrote I did flash CM12.1 dated 25.12.2015 from here
http://forum.xda-developers.com/galaxy-s3-neo/orig-development/rom-cyanogenmod-12-1-s3-neo-t3099384
It didn't work either. Is it possible that I chose the wrong GApps and this was the reason?
I think I used open gapps stock version, but not sure, don't have that SD card and can't check now.

i have used CM12 and 12.1 rox and RR and i don't recall these two problems that you have mentioned specially the internet problem to me it was perfect but with a little reboot here and there so soory i couldn't help.
P.S :soory for my bad english

Phone freezes on fingerprint unlock [multiple ROMs]

Hi everybody!
Normally I was using OxySlim ROM and had no poblems with it at all.
Yesterday I tried to flash CM13 with Nano-Gapps. Everything worked
and I configured 4 fingers for fingerprint unlock. After some more
configuration and app installations I tried to unlock with my fingerprint
and my phone freezed completely. I rebootet with long press of On/Off button
and retried, but it freezed again.
Then I restored my OxySlim Nandroid backup and even there my phone freezes now
with every fingerprint unlock attempt. I tried the "[Guide] OnePlus 2 Home Button Dead Solutions", but no change. (Sadly I have no *#808#-menu with OxySlim)
My homebutton and all other buttons are working well, but phone freezes with every fp-unlock attempt.
Find some logs attached. Fingerprint messages are tagged with "FingerPrintLogUtil".
Thank you for your help!

hello.. i faced the same issues wen i switched to cm 13 from OOS.. fp sensor would not work even wen i tried on different roms like crdroid and bliss pop.. also after d first reboot on every rom, d dialer app would force close..
den i read somewhere about d new modem.. i looked for it and flashed it, after factory reset and clearing cache.. den i installed d cm 13 again wid mini gapps.. not facing a single issue after dat and d fon works flawlessly now..
so u might consider flashing dat new modem, if u havnt already..
here's d link:
https://androidfilehost.com/?fid=24407100847293158

Thanks for your answer @meetg22 !
Which CM13 are you using? CM13 from @Seraph08 ?
Because I read here that Seraphs cm13 requires old Modem? I would give it a try but
since getting back the old modem seems not so easy I would stick to the old one until I'm sure to do the right thing.

yes @obermeier i am using Seraph's cm 13..
also i visited the link that you mentioned... i can see that there it is written to flash d new modem for seraph's rom if coming from oos.. please confirm again

obermeier said:
Thanks for your answer @meetg22 !
Which CM13 are you using? CM13 from @Seraph08 ?
Because I read here that Seraphs cm13 requires old Modem? I would give it a try but
since getting back the old modem seems not so easy I would stick to the old one until I'm sure to do the right thing.
Click to expand...
Click to collapse
meetg22 said:
yes @obermeier i am using Seraph's cm 13..
also i visited the link that you mentioned... i can see that there it is written to flash d new modem for seraph's rom if coming from oos.. please confirm again
Click to expand...
Click to collapse
Seraph's build will work on both modems. I confirmed again.
if you read carefully you'll know what I said.
1. Which modem/firmware should I flash before I install this ROM?
This is question raised by many people who have security settings crash or bootloop. So I wanted to write upon this in two ways.
If you are coming from Leaked H2OS Marshmallow ROM then,
First, you need to flash the revert2lollipop zip from here How to revert back to Lollipop by Yash98 if not your device will be in boot loop.
Below are the ROMs you can flash directlywhen you come from Leaked H2OS MM or Based ROMs after flashing revert2lollipop zip.
ROM][6.0.1][UNOFFICIAL] CyanogenMod 13.0 __Seraph08
[ROM][6.0.1][UNOFFICIAL] Blissrom __benschhold
[ROM][6.0.1][UNOFFICIAL] crDroid __taker18
[ROM][6.0.1][UNOFFICIAL] Temasek CM 13 __benschhold
[ROM][6.0.1][UNOFFICIAL] CyanPop v5.9 __taker18
[ROM][6.0.1][--OFFICIAL--] Resurrection Remix v5.6.x __regalstreak
[ROM][6.0.1][--OFFICIAL--] AICP 11.0 __Trafalgar Square
[ROM][6.0.1][--OFFICIAL--] Mokee Open Source Project [email protected]
[ROM][6.0.1][--OFFICIAL--] Exodus Android 6 for __Raja.M
Click to expand...
Click to collapse
If you are coming from OxygenOS/HydrogenOS Lollipop ROM then,
I installed O2OS every time for testing I changed ROM, it really is a hectic task.
Below are the ROMs you can flash directlywhen you come from OxygenOS
[ROM][6.0.1][UNOFFICIAL] CyanogenMod 13.0 __Seraph08
Click to expand...
Click to collapse
Install *new*modem from https://androidfilehost.com/?w=files&flid=49404 for below ROMs
[ROM][6.0.1][UNOFFICIAL] Blissrom __benschhold
[ROM][6.0.1][UNOFFICIAL] crDroid __taker18
[ROM][6.0.1][UNOFFICIAL] Temasek CM 13 __benschhold
[ROM][6.0.1][UNOFFICIAL] CyanPop v5.9 __taker18
[ROM][6.0.1][--OFFICIAL--] Resurrection Remix v5.6.x __regalstreak
[ROM][6.0.1][--OFFICIAL--] AICP 11.0 __Trafalgar Square
[ROM][6.0.1][--OFFICIAL--] Mokee Open Source Project [email protected]
[ROM][6.0.1][--OFFICIAL--] Exodus Android 6 for __Raja.M
Click to expand...
Click to collapse

I tried it with new modem, no improvement.
But you are right, Seraphs CM13 build works with both modems.
I can confirm that.
I was then trying krishnas solution mentioned here.
But, I can only give you one suggestion. Try installing OxygenOS, check your fingerprint from 808 menu and then flash CM13. This will make your fingerprint unlock normal again.
Click to expand...
Click to collapse
Thank you very much @krishna442, that worked! Even without clean install of CM13. I just flashed my nandroid backup again.

obermeier said:
I tried it with new modem, no improvement.
But you are right, Seraphs CM13 build works with both modems.
I can confirm that.
I was then trying krishnas solution mentioned here.
Thank you very much @krishna442, that worked! Even without clean install of CM13. I just flashed my nandroid backup again.
Click to expand...
Click to collapse
:highfive:

[SM-G530FZ] Installed custom ROM, everything works, expect phone calls and 3G...?

Hi people of XDA. I installed the Resurrection Remix, Android 7.1.1 for my phone (I think it was the only ROM available for my model...) Everything works, expect the data connection (3G) and phone calls. I installed the fortunafz version (using other version, the touchscreen didn't work), but the microphone works. I don't know what to do ): Thank you in advance!

Cherryello said:
Hi people of XDA. I installed the Resurrection Remix, Android 7.1.1 for my phone (I think it was the only ROM available for my model...) Everything works, expect the data connection (3G) and phone calls. I installed the fortunafz version (using other version, the touchscreen didn't work), but the microphone works. I don't know what to do ): Thank you in advance!
Click to expand...
Click to collapse
CM13 FortunaFZ

Official lineage os 14.1 calls switching problem

Hello hai to everyone..
Recently i flashed official lineage 14.1 os custom rom on my zuk z1 but I'm faced calling sim switch problem And i found that calls with option is disabled..Not able to enable it,I think it's a major bug...can anyone fixed please let me know.
I tried with both airtel Sims and as well as airtel and jio sims but problem is still unresolved only one sim is working to make a call even i though I'm using two airtel sims but not able to switch between them.
But I'm receiving messages as well from second sim only calls switching between sims is not working...first sim always enabled as the default sim to make a call.

I'm also unable to see the call screen while in a call therefore unable to hang up or dial numbers during a call. It simply does not appear at all (after selecting the person to dial it just rings them in the background)

I am also face this problem

I think this is one of the major issue every Zuk Z1 user is facing. Same here. Probably we should ask the users who has upgraded from CM 13 to LOS 14.1 and check even they are facing this dual sim bug or not...also I think flashing Zui will solve the problem, but is the image/zip file for Zui 2.5 (Android 7.0) is available anywhere?
Sent from my ZUK Z1 using Tapatalk

pauldroid said:
I think this is one of the major issue every Zuk Z1 user is facing. Same here. Probably we should ask the users who has upgraded from CM 13 to LOS 14.1 and check even they are facing this dual sim bug or not...also I think flashing Zui will solve the problem, but is the image/zip file for Zui 2.5 (Android 7.0) is available anywhere?
Sent from my ZUK Z1 using Tapatalk
Click to expand...
Click to collapse
I tried all possibilities upgraded from CM13 to LOS14.1 Still problem is there.It's a major bug they have to fix it.Now u guys can use hexagon Nougat Rom as alternative it's working fine..

srk2521 said:
I tried all possibilities upgraded from CM13 to LOS14.1 Still problem is there.It's a major bug they have to fix it.Now u guys can use hexagon Nougat Rom as alternative it's working fine..
Click to expand...
Click to collapse
Hexagon for Z1? I flashed the same on Yu Yuphoria and in the first boot, the boot logo kept on animating for half an hour, I gave up hope and flashed RR (Nougat). With Z1, any such issues did you face? And sim bug is gone or what because after LOS 14.1, I flashed RR 5.8.2 hoping the bug will go away, but that's not the case.?
Sent from my ZUK Z1 using Tapatalk

pauldroid said:
Hexagon for Z1? I flashed the same on Yu Yuphoria and in the first boot, the boot logo kept on animating for half an hour, I gave up hope and flashed RR (Nougat). With Z1, any such issues did you face? And sim bug is gone or what because after LOS 14.1, I flashed RR 5.8.2 hoping the bug will go away, but that's not the case.
Sent from my ZUK Z1 using Tapatalk
Click to expand...
Click to collapse
sims working perfect and I haven't faced any problem but before flashing make sure that you have to wipe data,cache,system,boot folders.Take a backup before doing this process.
thank you.

srk2521 said:
sims working perfect and I haven't faced any problem but before flashing make sure that you have to wipe data,cache,system,boot folders.Take a backup before doing this process.
thank you.
Click to expand...
Click to collapse
Great! Will give a shot. One last query, is it pre-rooted?
Sent from my ZUK Z1 using Tapatalk

pauldroid said:
Great! Will give a shot. One last query, is it pre-rooted?
Sent from my ZUK Z1 using Tapatalk
Click to expand...
Click to collapse
YES it's pre-rooted.
thank you.

I also have sim switching​ problem in my zuk z1 after installing Los 14.1.......

The call switching problem occurs since the baseband is not updated to correctly interact with Nougat. (As far as I know)
Flashing the ZUI zip corrects that since the modem is also updated, ZUI being an official software, and the company providing the updated modem files.
You can try updating the modem only, using fastboot commands in the bootloader with the modem file from ZUI zip and onto the modem partition.
Or you can wipe the device and do clean installs twice with ZUI, and LineageOS again.
Here's the link for ZUI 2.5 (Nougat) I used :
https://forum.xda-developers.com/zuk-z1/orig-development/beta-zui-v2-5-115-t3539841
**It worked for me**

nschdeva said:
The call switching problem occurs since the baseband is not updated to correctly interact with Nougat. (As far as I know)
Flashing the ZUI zip corrects that since the modem is also updated, ZUI being an official software, and the company providing the updated modem files.
You can try updating the modem only, using fastboot commands in the bootloader with the modem file from ZUI zip and onto the modem partition.
Or you can wipe the device and do clean installs twice with ZUI, and LineageOS again.
Here's the link for ZUI 2.5 (Nougat) I used :
https://forum.xda-developers.com/zuk-z1/orig-development/beta-zui-v2-5-115-t3539841
**It worked for me**
Click to expand...
Click to collapse
How do you update the modem only? A little help would be much appreciated
P.s. i tried flashing Zui 2.5 306 something then flashed a nougat rom(nuclearom), sim problem still persists

mrkentoy said:
How do you update the modem only? A little help would be much appreciated
P.s. i tried flashing Zui 2.5 306 something then flashed a nougat rom(nuclearom), sim problem still persists
Click to expand...
Click to collapse
Try flashing NON-HLOS.bin from the zui zip using "fastboot flash modem *filename*" in bootloader mode.
**I haven't tried this so do take backup.**
And my problem was solved by clean flashing ZUI only. I used 2.5.115 beta version. I am currently using LineageOS, latest nightly from 4 April.

nschdeva said:
Try flashing NON-HLOS.bin from the zui zip using "fastboot flash modem *filename*" in bootloader mode.
**I haven't tried this so do take backup.**
And my problem was solved by clean flashing ZUI only. I used 2.5.115 beta version. I am currently using LineageOS, latest nightly from 4 April.
Click to expand...
Click to collapse
Ok sir. I will try to do those things. Thank you

mrkentoy said:
Ok sir. I will try to do those things. Thank you
Click to expand...
Click to collapse
Don't forget feedbacks please.

Radhouene90 said:
Don't forget feedbacks please.
Click to expand...
Click to collapse
I tried. Still nothing. Sad.
Edit. My baseband version is 0.1.c1.10-00004-M8974AAAAANAZM-1

mrkentoy said:
I tried. Still nothing. Sad.
Edit. My baseband version is 0.1.c1.10-00004-M8974AAAAANAZM-1
Click to expand...
Click to collapse
I removed the sim card , made a clean and insert it again. The problem did not occured again since yesterday. I will give you feedback if it will occure again. Try it

Radhouene90 said:
I removed the sim card , made a clean and insert it again. The problem did not occured again since yesterday. I will give you feedback if it will occure again. Try it
Click to expand...
Click to collapse
Thanks. I will try that if i have time. Did you remove both sims?

mrkentoy said:
Thanks. I will try that if i have time. Did you remove both sims?
Click to expand...
Click to collapse
Yes bro

Solved : https://youtu.be/E2P4sZvpXPE