Hi everybody!
Normally I was using OxySlim ROM and had no poblems with it at all.
Yesterday I tried to flash CM13 with Nano-Gapps. Everything worked
and I configured 4 fingers for fingerprint unlock. After some more
configuration and app installations I tried to unlock with my fingerprint
and my phone freezed completely. I rebootet with long press of On/Off button
and retried, but it freezed again.
Then I restored my OxySlim Nandroid backup and even there my phone freezes now
with every fingerprint unlock attempt. I tried the "[Guide] OnePlus 2 Home Button Dead Solutions", but no change. (Sadly I have no *#808#-menu with OxySlim)
My homebutton and all other buttons are working well, but phone freezes with every fp-unlock attempt.
Find some logs attached. Fingerprint messages are tagged with "FingerPrintLogUtil".
Thank you for your help!
hello.. i faced the same issues wen i switched to cm 13 from OOS.. fp sensor would not work even wen i tried on different roms like crdroid and bliss pop.. also after d first reboot on every rom, d dialer app would force close..
den i read somewhere about d new modem.. i looked for it and flashed it, after factory reset and clearing cache.. den i installed d cm 13 again wid mini gapps.. not facing a single issue after dat and d fon works flawlessly now..
so u might consider flashing dat new modem, if u havnt already..
here's d link:
https://androidfilehost.com/?fid=24407100847293158
Thanks for your answer @meetg22 !
Which CM13 are you using? CM13 from @Seraph08 ?
Because I read here that Seraphs cm13 requires old Modem? I would give it a try but
since getting back the old modem seems not so easy I would stick to the old one until I'm sure to do the right thing.
yes @obermeier i am using Seraph's cm 13..
also i visited the link that you mentioned... i can see that there it is written to flash d new modem for seraph's rom if coming from oos.. please confirm again
obermeier said:
Thanks for your answer @meetg22 !
Which CM13 are you using? CM13 from @Seraph08 ?
Because I read here that Seraphs cm13 requires old Modem? I would give it a try but
since getting back the old modem seems not so easy I would stick to the old one until I'm sure to do the right thing.
Click to expand...
Click to collapse
meetg22 said:
yes @obermeier i am using Seraph's cm 13..
also i visited the link that you mentioned... i can see that there it is written to flash d new modem for seraph's rom if coming from oos.. please confirm again
Click to expand...
Click to collapse
Seraph's build will work on both modems. I confirmed again.
if you read carefully you'll know what I said.
1. Which modem/firmware should I flash before I install this ROM?
This is question raised by many people who have security settings crash or bootloop. So I wanted to write upon this in two ways.
If you are coming from Leaked H2OS Marshmallow ROM then,
First, you need to flash the revert2lollipop zip from here How to revert back to Lollipop by Yash98 if not your device will be in boot loop.
Below are the ROMs you can flash directlywhen you come from Leaked H2OS MM or Based ROMs after flashing revert2lollipop zip.
ROM][6.0.1][UNOFFICIAL] CyanogenMod 13.0 __Seraph08
[ROM][6.0.1][UNOFFICIAL] Blissrom __benschhold
[ROM][6.0.1][UNOFFICIAL] crDroid __taker18
[ROM][6.0.1][UNOFFICIAL] Temasek CM 13 __benschhold
[ROM][6.0.1][UNOFFICIAL] CyanPop v5.9 __taker18
[ROM][6.0.1][--OFFICIAL--] Resurrection Remix v5.6.x __regalstreak
[ROM][6.0.1][--OFFICIAL--] AICP 11.0 __Trafalgar Square
[ROM][6.0.1][--OFFICIAL--] Mokee Open Source Project [email protected]
[ROM][6.0.1][--OFFICIAL--] Exodus Android 6 for __Raja.M
Click to expand...
Click to collapse
If you are coming from OxygenOS/HydrogenOS Lollipop ROM then,
I installed O2OS every time for testing I changed ROM, it really is a hectic task.
Below are the ROMs you can flash directlywhen you come from OxygenOS
[ROM][6.0.1][UNOFFICIAL] CyanogenMod 13.0 __Seraph08
Click to expand...
Click to collapse
Install *new*modem from https://androidfilehost.com/?w=files&flid=49404 for below ROMs
[ROM][6.0.1][UNOFFICIAL] Blissrom __benschhold
[ROM][6.0.1][UNOFFICIAL] crDroid __taker18
[ROM][6.0.1][UNOFFICIAL] Temasek CM 13 __benschhold
[ROM][6.0.1][UNOFFICIAL] CyanPop v5.9 __taker18
[ROM][6.0.1][--OFFICIAL--] Resurrection Remix v5.6.x __regalstreak
[ROM][6.0.1][--OFFICIAL--] AICP 11.0 __Trafalgar Square
[ROM][6.0.1][--OFFICIAL--] Mokee Open Source Project [email protected]
[ROM][6.0.1][--OFFICIAL--] Exodus Android 6 for __Raja.M
Click to expand...
Click to collapse
I tried it with new modem, no improvement.
But you are right, Seraphs CM13 build works with both modems.
I can confirm that.
I was then trying krishnas solution mentioned here.
But, I can only give you one suggestion. Try installing OxygenOS, check your fingerprint from 808 menu and then flash CM13. This will make your fingerprint unlock normal again.
Click to expand...
Click to collapse
Thank you very much @krishna442, that worked! Even without clean install of CM13. I just flashed my nandroid backup again.
obermeier said:
I tried it with new modem, no improvement.
But you are right, Seraphs CM13 build works with both modems.
I can confirm that.
I was then trying krishnas solution mentioned here.
Thank you very much @krishna442, that worked! Even without clean install of CM13. I just flashed my nandroid backup again.
Click to expand...
Click to collapse
:highfive:
Related
Hey i tryed long by my self with my new note3 pro
This is how i got all working for me
- unlock bootloader officially
- Flash official TWRP
- Wipe all
- Flash CM13 Firmware then reboot recovery!!! (The Strix)
- Flash CM13 or AOSP 6.0.1 Rom
- Flash latest open Gapps
- Flash Goodix_FP_8
- Flash AgNi Pure CM kernel or Radon 2.9
- Flash CM13Radio ------> important! or you stuck in a bootloop at some roms (The Strix)
Hope i helped some people with this :fingers-crossed:
There you go for fp8 https://yadi.sk/d/YX644C9UvjMNj
and here is Radio https://drive.google.com/file/d/0B2CgYqnPbCh_RnJDaHJtdEFYRGM/view
Remember this is not my work. I post this, to help all others who got stucked like me.
Just wanna save those guys some time!
Can you give download link.. For goodix fp8 and cm13radio, i only have cm 13 firmware. I will try in rombased cm13. Thanks before
illall said:
Can you give download link.. For goodix fp8 and cm13radio, i only have cm 13 firmware. I will try in rombased cm13. Thanks before
Click to expand...
Click to collapse
There you go for fp8 https://yadi.sk/d/YX644C9UvjMNj
and here is Radio https://drive.google.com/file/d/0B2CgYqnPbCh_RnJDaHJtdEFYRGM/view
Remember this is not my work. I post this, to help all others who got stucked like me.
Just wanna save those guys some time!
This doesn't work for me.
Hello,
I tried yours, only Radon 3.2 instead of 2.9. Camera works like a charm but not Goodix FP. What should I do?
thanks
worked perfect on my kenzoo with goodix fp
do any 1 know when we will have RR rom of nougat for LUX ???
Till now there is no ETA...u can use AICP latest build....its just awesome
soon is possible... all developers waits for cm14.1
RR hasn't even started pushing test builds yet for Nexus devices. Have some patience. When it's ready, they will start releasing builds.
thanks all
avinandan cool said:
Till now there is no ETA...u can use AICP latest build....its just awesome
Click to expand...
Click to collapse
Which built have you flashed of aicp
Because I tried flashing the aicp latest built
The flashing process got stuck
I made this thread just to make sure i'm not the only one for whom VoLte doesn't seem to work on any rom except Miui and Aosp 5.0. I've tried so hard to get VoLte restored efs from miui mm tried differet roms, bricked my device no. of times experimenting but all in vain. VoLte is not a big deal for me ( i can use Jio4gvoice) but yet it's working for so many people and i get sometimes jealous. Moreover i don't wanna go back to MiUi.
If anyone after going through all this trouble was able to enable VoLte in any Nougat rom please do share your experience. It may be helpful for so many users searching for the VoLte fix here and there in all the threads.
I also try so many things but finally a got volte....
First i flash other rom by Abhishek987 cyanogenmod 14.1 as described in op restart and finishing Complete booting
I got volte....
Again boot in zxc twrp recovery
factory reset
Flash remix rom follow gaps pico
Restart.. Again i got volte
That's it.
nravin said:
I also try so many things but finally a got volte....
First i flash other rom by Abhishek987 cyanogenmod 14.1 as described in op restart and finishing Complete booting
I got volte....
Again boot in zxc twrp recovery
factory reset
Flash remix rom follow gaps pico
Restart.. Again i got volte
That's it.
Click to expand...
Click to collapse
I guess getting VoLte depends all on luck xD
iamharish said:
I guess getting VoLte depends all on luck xD
Click to expand...
Click to collapse
You may try my method
nravin said:
You may try my method
Click to expand...
Click to collapse
You said you just booted cm14.1 by @abhishek987 and it was working fine.
iamharish said:
You said you just booted cm14.1 by @abhishek987 and it was working fine.
Click to expand...
Click to collapse
Yes
Same problem here
voLTE working on miui and aosp 5.0 only
BTW you are also using alka twrp?
Use zcx twrp, try leak aosp 6.0.1 which has volte.
Sent from my Redmi Note 3 using XDA Free mobile app
Got VoLte working!
rajatchawla66 said:
Same problem here
voLTE working on miui and aosp 5.0 only
BTW you are also using alka twrp?
Click to expand...
Click to collapse
Hi there! Recently i got VoLte working on every single rom. I will make a thread soon of the procedure i follwed.
P.s- That procedure will work 110%
Edit- follow this guide
http://forum.xda-developers.com/redmi-note-3/how-to/guide-volte-fix-nougat-roms-users-t3518614
Hi there,
I tried almost all the nougat ROMs here and none of them were working for VoLTE. So decided to follow the Nougat VoLTE Patch thread [http://forum.xda-developers.com/red.../volte-patches-nougat-based-cm-roms-t3509257], but it still didn't work while following the procedure provided on the thread. So I decided to play on myself and did a few trail and error.
Somehow this worked for me to get the VoLTE working:
- I downloaded the Abhishek's
CM14.1 and Firmware which said to have the VoLTE support: http://forum.xda-developers.com/redmi-note-3/development/rom-cyanogenmod-14-1-t3500569
- Then I downloaded the lastest SuperSU to flash because I had flashed a MIUI Global Stable, so it had locked my bootloader again and I wanted to root again, and I think this is what did the trick but I'm not sure: https://download.chainfire.eu/696/supersu/
- Downloaded the volte_cm-161123TheStrix.zip and the volte.zip from the Nougat VoLTE Patch thread: http://forum.xda-developers.com/devdb/project/?id=18113#downloads
- Then I flashed them in this sequence by adding them all together in queue in TWRP.
First I wiped system, data, cache/dalvik in TWRP (I already had a backup)
Then added SuperSU>Firmware>CM14.1>volte_cm-161123TheStrix.zip>volte.zip to the flash queue and flashed them all together and rebooted. It got stuck in the bootloop, so booted into fastboot and rebooted again by holding the power button. Then it booted successfully and had the HD :laugh:
Then my aim was to flash the latest RR which had the VoLTE, so I followed the same procedure and added this RR to the queue instead of Abhishek's CM14.1 and it worked there too :laugh: :http://forum.xda-developers.com/redmi-note-3/development/rom-resurrectionremix-5-8-0-t3507433
Hope this helps!
Hello!
Every custom rom I try to use in my redmi 2 pro 2014819 (prime in USA, pro in Brazil) shows random restarts, usually when the screen is off.
I have tried to use different bootloaders (miui KK and miui LP), different versions of TWRP (2.8.7.2 and 3.0.2.0), remove the sd card, different ways to flash, change the Linux from permissive to enforcing, disable the kernel panic , Different roms (the only one that did not restart in 4 days was CrDroid 4.4.4); And all led to random restarts.
I have already tested RR mm, RR N, Cyanogenmod, LineageOS, TeslaN, Tesla MM, AOSP Extended, Dirty Unicorns, AOSIP, Mokee 6, Mokee 7.1, among others, and unfortunately all presented the same problem.
I would be very grateful if anyone could help me; I believe that the problem is not in the process of flashing, but everything is possible.
Thanks in advance!
Did u try miui lolypop firmware provided on Lineage os thread?
Post ur problem with Model name,Logcat and Dmseg on ROM thread.
raymond_bqg said:
Did u try miui lolypop firmware provided on Lineage os thread?
Post ur problem with Model name,Logcat and Dmseg on ROM thread.
Click to expand...
Click to collapse
I tried to flash, but reboots continued to occur; The only change that occurred was that I could not get into twrp anymore, I will restore via fastboot and reinstall. Not put in the roms thread as it happens with all, and I believe it to be some problem on the device chip, twrp or something.
You should try the Jerrica Cosmos Kernel on RR or Mokee Rom.
My screen is entirely broken.. so i replace display at market and then almost all custom rom boot very well but after screen lock touch are note working.. we have to reboot device and first time touch working but after screen lock it's not responsive..
Resurrection Remix treble with moun kernel & stock rom working fine..
Any other rom are not working after screen lock.
Please any one help for this problem??
Prince parth said:
My screen is entirely broken.. so i replace display at market and then almost all custom rom boot very well but after screen lock touch are note working.. we have to reboot device and first time touch working but after screen lock it's not responsive..
Resurrection Remix treble with moun kernel & stock rom working fine..
Any other rom are not working after screen lock.
Please any one help for this problem??
Click to expand...
Click to collapse
I have this exact same problem. I tried with LiquidRemix and didn't check any other ROMs. Thought it was some kind of hardware problem but after reading your comment i guess it wasn't, as you said its working in RR. Thanks for finding that out. Now i am going to try each and every ROM available to check which one works and which one don't. I also think this must be a kernel problem as there are no hardware issues. Can you flash moun kernel in different ROMs to check whether it works or not?
ImSSin said:
I have this exact same problem. I tried with LiquidRemix and didn't check any other ROMs. Thought it was some kind of hardware problem but after reading your comment i guess it wasn't, as you said its working in RR. Thanks for finding that out. Now i am going to try each and every ROM available to check which one works and which one don't. I also think this must be a kernel problem as there are no hardware issues. Can you flash mourn kernel in different ROMs to check whether it works or not?
Click to expand...
Click to collapse
Yes I checked lineage os, all android pie based ROMs but it didn't work.. currently I'm using Miui10 port and it's working fine??
Prince parth said:
Yes I checked lineage os, all android pie based ROMs but it didn't work.. currently I'm using Miui10 port and it's working fine
Click to expand...
Click to collapse
Cosmicdan's Twrp is not working for me. Only mohancm's twrp 3.2.1-2 is working but after locking and relocking the screen in TWRP.
Just flashed RR non treble and the touch is not working after the screen lock
How did you flash RR treble if the cosmicdan's twrp is not working. Was your device already partitioned for treble or is there any workaround?
ImSSin said:
Cosmicdan's Twrp is not working for me. Only mohancm's twrp 3.2.1-2 is working but after locking and relocking the screen in TWRP.
Just flashed RR non treble and the touch is not working after the screen lock
How did you flash RR treble if the cosmicdan's twrp is not working. Was your device already partitioned for treble or is there any workaround?
Click to expand...
Click to collapse
Yes Cosmicdan's Twrp not working but if you install stock ROM and then install Cosmicdan's Twrp then it will work for sure..
Prince parth said:
Yes Cosmicdan's Twrp not working but if you install stock ROM and then install Cosmicdan's Twrp then it will work for sure..
Click to expand...
Click to collapse
Hmm i'll try that in a bit (making backups 1st). Can you please guide me how you got MIUI 10 working as I am not able to do so. Should i flash stock nougat ROM 1st and then flash MIUI 10? I tried following the steps stated in the forum but i am always getting bootloops.
Sorry for bugging you with my nooby questions :silly:
ImSSin said:
Hmm i'll try that in a bit (making backups 1st). Can you please guide me how you got MIUI 10 working as I am not able to do so. Should i flash stock nougat ROM 1st and then flash MIUI 10? I tried following the steps stated in the forum but i am always getting bootloops.
Sorry for bugging you with my nooby questions :silly:
Click to expand...
Click to collapse
Don't need to flash stock ROM I'm on Resurrection Remix treble ROM and for flashing I followed steps stated in forum.. it's work for me no bootloops.
First fastboot flash userdata userdata.img and then boot into Twrp and flash ROM zip that's all.
ImSSin said:
Hmm i'll try that in a bit (making backups 1st). Can you please guide me how you got MIUI 10 working as I am not able to do so. Should i flash stock nougat ROM 1st and then flash MIUI 10? I tried following the steps stated in the forum but i am always getting bootloops.
Sorry for bugging you with my nooby questions :silly:
Click to expand...
Click to collapse
Userdata.img is not necessary, just install the rom and format data(must) then reboot
Thnx for the help guys but after spending hours flashing different ROMs, TWRPs and kernels, I finally found the solution for the touch screen bug.
eXtreme kernel is the only kernel that was able to fix the screen completely. Its working in all of the custom ROMs (tried on LOS15.1 & 16, RR, LR Oreo and pie, etc.)
The stock versions of francokernel, void kernel are able to fix the touch screen but it breaks WiFi so they are not a complete fix.
And btw stock versions of Franco,extreme,void kernels work on the stock ROM.
my touch doesnt work on pin screen and in twrp **help** after flash from stock oreo to this rom exl. format data /system and cache..
must i calibrate this or?? when i pres 1 touch meen 9 homebuttons too
is my touch broken or its a bug??
//after flash oreo 8.1 with mi flash ... touch doesnt work
yasars said:
my touch doesnt work on pin screen and in twrp **help** after flash from stock oreo to this rom exl. format data /system and cache..
must i calibrate this or?? when i pres 1 touch meen 9 homebuttons too
is my touch broken or its a bug??
//after flash oreo 8.1 with mi flash ... touch doesnt work
Click to expand...
Click to collapse
have you tried flashing the extreme kernel?
extreme kernel v11 not working only V8 working for me.
What about you guys??
only with kernal 4.9 based custom roms, i have touch issues as described in here. and yeah i had screen replacement too.
now i can't flash any new pie roms as they all are based on 4.9 kernals and i can't find the old pie roms based on 3.18(link dead)..right now on los15.1
:crying::crying::crying::crying::crying::crying::crying:
Same problem here
ImSSin said:
have you tried flashing the extreme kernel?
Click to expand...
Click to collapse
ImSSin
Were you able to solve this problem? Can you put the link to download the kernel?