need help, Brick. QHSUSB_BULK > Qualcomm - Galaxy Note 4 Q&A, Help & Troubleshooting

Hi, I've had a BRICK in the middle of an update.
The phone does not turn in any way. Recognized by the computer as QHSUSB_BULK. But I managed to install the driver and now recognized as qualcomm hs-usb qdloader 9008.
No can do, I need to get my note 4 ...
Im spanish, sorry for my bad English

Are able to get the phone into fastboot mode?

cyther_ said:
Are able to get the phone into fastboot mode?
Click to expand...
Click to collapse
no, I can not go ..

Related

Qualcomm mode after write kernel

Hello!
I tried to write new kernel to this phone and now the phone is dead :/ When I connect it to computer it shows qualcomm HS-USB QDloader 9008, I don't need to turn it on, this mode is automatically.
How Can I revive this phone?
Thx for helping.
Try this:
http://forum.xda-developers.com/nexus-4/general/tutorial-how-to-unbrick-n4-t2347060
Problem is that I can't enter to download mode :/
What exactly did you flash?

[Q] HELP! HardBrick

My nexus 4 is bricked!
The computer recognizes it as a Qualcomm HS-USB QDLoader 9008 (COM #), nothing else works!
This happened after flash official firmware. How can I unbrick the phone?
http://forum.xda-developers.com/nexus-4/general/wip-unbricking-nexus-4-using-qpst-t2208289
fahadsul3man said:
http://forum.xda-developers.com/nexus-4/general/wip-unbricking-nexus-4-using-qpst-t2208289
Click to expand...
Click to collapse
But how to use all these soft??? I need some instrucions for QPST

I need some help with Qualcomm 9008

Hi,
My phone got bricked while installing and update. The phone i hard bricked it shows no signs of life and does not go to Download or recovery mode. Not by button combination or USB Jig.
When I connect the phone to the laptop it shows qualcomm hs-usb qdloader 9008. Is there any way to rescue the phone and debrick it?
Thanks :crying:
Come on people there should be a solution to this crap

helppp bricked!

Edit*** I fixed it****
no bootloader, recovery or system, its also listed as unkown device on device manager.
i had it unlocked bootloader. and had magisk installed. but i made error of relocking.... i used the axon 7 tool.
Please i really need help maybe even remote desktop. and ill even pay i can't lose this phone i paid way too much for it
okay i have fast boot
WADE13x said:
no bootloader, recovery or system, its also listed as unkown device on device manager.
i had it unlocked bootloader. and had magisk installed. but i made error of relocking.... i used the axon 7 tool.
Please i really need help maybe even remote desktop. and ill even pay i can't lose this phone i paid way too much for it
Click to expand...
Click to collapse
Why did you lock it? There are a bunch of warnings everywhere. you couldn't have missed all of them...
Well try to get into EDL, maybe you can use MiFlash to fix it. But I can't help you more if you don't tell me what model it is...
Choose an username... said:
Why did you lock it? There are a bunch of warnings everywhere. you couldn't have missed all of them...
Well try to get into EDL, maybe you can use MiFlash to fix it. But I can't help you more if you don't tell me what model it is...
Click to expand...
Click to collapse
its a A2017U
miflash doesnt work
WADE13x said:
its a A2017U
miflash doesnt work
Click to expand...
Click to collapse
But what mode is the phone in when you put it in EDL?
Put the phone in EDL and go to Device manager, open the 'Ports (Com & LPT) tab', it should appear either as "Qualcomm HS-USB QDLoader 9008" or as "ZTE DFU interface". If the latter, you have to follow the 4th categ brick repair manual. And if it appears below 'USB devices' as 'QUSB_BULK', you should uninstall the driver (and tick 'delete driver software too') and restart EDL (hold the 3 buttons until the Device Manager spazzes
Choose an username... said:
But what mode is the phone in when you put it in EDL?
Put the phone in EDL and go to Device manager, open the 'Ports (Com & LPT) tab', it should appear either as "Qualcomm HS-USB QDLoader 9008" or as "ZTE DFU interface". If the latter, you have to follow the 4th categ brick repair manual. And if it appears below 'USB devices' as 'QUSB_BULK', you should uninstall the driver (and tick 'delete driver software too') and restart EDL (hold the 3 buttons until the Device Manager spazzes
Click to expand...
Click to collapse
i can't even see it showing up
https://photos.app.goo.gl/SdqJGWGkBE9TYxfE3
What do you make of this?
Turn off your phone. Connect to PC your device. Press volume up+down+power button for a while. You'll hear a sound from PC and check notification light. It should blink for one time. Then release buttons and let us know what do you see on device manager.
WADE13x said:
https://photos.app.goo.gl/SdqJGWGkBE9TYxfE3
What do you make of this?
Click to expand...
Click to collapse
What do I make of that? That's fastboot. I asked you to get to EDL. so nothing
If you want help you need to post more then once an hour and give us the info requested.
lafester said:
If you want help you need to post more then once an hour and give us the info requested.
Click to expand...
Click to collapse
sorry a friend needed me, setting up edl now
it says: unknown usb device (device descriptor request failed)
i got the right driver
Choose an username... said:
But what mode is the phone in when you put it in EDL?
Put the phone in EDL and go to Device manager, open the 'Ports (Com & LPT) tab', it should appear either as "Qualcomm HS-USB QDLoader 9008" or as "ZTE DFU interface". If the latter, you have to follow the 4th categ brick repair manual. And if it appears below 'USB devices' as 'QUSB_BULK', you should uninstall the driver (and tick 'delete driver software too') and restart EDL (hold the 3 buttons until the Device Manager spazzes
Click to expand...
Click to collapse
i have it in Qualcomm HS-USB QDLoader 9008
whats the next step?
WADE13x said:
i have it in Qualcomm HS-USB QDLoader 9008
whats the next step?
Click to expand...
Click to collapse
Run MiFlash and flash a FULL_EDL package
You have to find one for the A2017U, you can't use packages for the A2017 kr the A2017G or you'll mess up even more

Qualcomm hs-usb qdloader 9008 nexus 6P (HELP!)

Hi. My Nexus 6P is not turning on and when i connect it, gives me Qualcomm hs-usb qdloader 9008.
How can i fix this?
sufy1000 said:
Hi. My Nexus 6P is not turning on and when i connect it, gives me Qualcomm hs-usb qdloader 9008.
How can i fix this?
Click to expand...
Click to collapse
Dead motherboard maybe
That is EDL, Emergency Down Load mode. Its a kind of hardware fastboot mode on Qualcomm chips. you can use special flash software to flash your phone back to factory condition. It may not be dead. It may be fine.
Cursedmale said:
That is EDL, Emergency Down Load mode. Its a kind of hardware fastboot mode on Qualcomm chips. you can use special flash software to flash your phone back to factory condition. It may not be dead. It may be fine.
Click to expand...
Click to collapse
How? can you please detail us? My mobile too down!

Categories

Resources