My nexus 4 is bricked!
The computer recognizes it as a Qualcomm HS-USB QDLoader 9008 (COM #), nothing else works!
This happened after flash official firmware. How can I unbrick the phone?
http://forum.xda-developers.com/nexus-4/general/wip-unbricking-nexus-4-using-qpst-t2208289
fahadsul3man said:
http://forum.xda-developers.com/nexus-4/general/wip-unbricking-nexus-4-using-qpst-t2208289
Click to expand...
Click to collapse
But how to use all these soft??? I need some instrucions for QPST
Related
Please help me with my lg p705
No power
if the connect to the PC the device detected as qualcomm hs-usb qdloader 9008
thank you
dota1990 said:
Please help me with my lg p705
No power
if the connect to the PC the device detected as qualcomm hs-usb qdloader 9008
thank you
Click to expand...
Click to collapse
You're posting in the wrong section. This is the Optimus Lx II section. You should post here.
dota1990 said:
Please help me with my lg p705
No power
if the connect to the PC the device detected as qualcomm hs-usb qdloader 9008
thank you
Click to expand...
Click to collapse
i have a phone with the exactly same issue model p705 made in korea ...
HARD BRICK LG G2 RELINK HS-USB Qloader 9008, but no partitions detected
My model is LG G2 D802/32gb
please help me
:crying:
hakim31 said:
HARD BRICK LG G2 RELINK HS-USB Qloader 9008, but no partitions detected
My model is LG G2 D802/32gb
please help me
:crying:
Click to expand...
Click to collapse
Hey dont worry, use somboons utility, it solves this problem. I tested this maybe 3 times.
Hello,
Just hard-bricked my used PH-1 phone trying to flash a version of PIE from Essential's web site.
I used the USB cable that came with the phone, and am now reading that this can brick the phone.
It is completely unresponsive and won't turn on. My PC recognizes it as Qualcomm HS-USB QDLoader 9008
I've seen some older posts related to this issue, but none where it was fixed. Does anyone know of a way to fix the phone?
Thanks!
lesterf said:
Hello,
Just hard-bricked my used PH-1 phone trying to flash a version of PIE from Essential's web site.
I used the USB cable that came with the phone, and am now reading that this can brick the phone.
It is completely unresponsive and won't turn on. My PC recognizes it as Qualcomm HS-USB QDLoader 9008
I've seen some older posts related to this issue, but none where it was fixed. Does anyone know of a way to fix the phone?
Thanks!
Click to expand...
Click to collapse
Nope...
The only successful unbricking was a motherboard transplant... Which requires another device... And some serious know how
any help ? i have same issue
rakan10000 said:
any help ? i have same issue
Click to expand...
Click to collapse
The last post from rignfool sums it up...
please someone help me hardbrick just connect by Qualcomm HS-USB QDLoader 9008 from what i saw need blankflash please help
cleberkorg said:
please someone help me hardbrick just connect by Qualcomm HS-USB QDLoader 9008 from what i saw need blankflash please help
Click to expand...
Click to collapse
http://t.me/motog7river
Hi. My Nexus 6P is not turning on and when i connect it, gives me Qualcomm hs-usb qdloader 9008.
How can i fix this?
sufy1000 said:
Hi. My Nexus 6P is not turning on and when i connect it, gives me Qualcomm hs-usb qdloader 9008.
How can i fix this?
Click to expand...
Click to collapse
Dead motherboard maybe
That is EDL, Emergency Down Load mode. Its a kind of hardware fastboot mode on Qualcomm chips. you can use special flash software to flash your phone back to factory condition. It may not be dead. It may be fine.
Cursedmale said:
That is EDL, Emergency Down Load mode. Its a kind of hardware fastboot mode on Qualcomm chips. you can use special flash software to flash your phone back to factory condition. It may not be dead. It may be fine.
Click to expand...
Click to collapse
How? can you please detail us? My mobile too down!