Problem solved when the battery dies.
Hi,
i have a GS7Edge and i get back to the stock firmware without modifications, i've been notified of a software update on SmartSwitch, i've downloaded and flash the rom and SmartSwitch says the update was passed, but the phone stuck to Download Mode, in Odin, the phone isnt detected and i can't reboot the phone, even with power+vol-.
Now i will wait the battery to die to flash back in.
Is anyone have this before ?, sorry for my bad english, i am french.
Thanks for your help.
Related
my phone Samsung galaxy core 2 sm-g355h started updating! when getting in 95% of updating have stopped with the message error! so from now and then my phone restarts and try again to reinstall the update with the same result!! can't insert in recovery mode because it's starts again the upadating!! so my phone is dead and cannot do anything! even with odin i have tried to install a stock rom and cannot do it! it say's tha cannot open com port! althought odin see's the phone!! i have been dissapointed!! the only sollution that remain's to me is to pay a visit in samsung's dealer!! Do you have any idea?
:crying:
I had the same problem with this device... I had to flash stock rom with odin.
Just install kies and open it. Then reinstall usb driver through kies and then try flashing stock rom with odin, it will surely work. So good luck with that.
updating via ota isnt much good follow kies or stores
did you fix it? if yes how? I have the same problem
The best thing about samsung is Samsung Kies. There is a emergency firmware recover or something of that kind, I dont remember the name. Just install it and connect your device to it. It will try to recover your phone
go to a mobile center
Hi
I have this Samsung Galaxy Note 4 (SM N910F). I am here in Pakistan. I purchased my Note 4 from UK and Its on EE. I was using it here and it got an Official OTA Update of Marshmallow which I installed. After a couple of days, my phone automatically got bricked. I contacted a local mobile repairing shop who dumped some other unbranded international firmware which changed its CSC too [CSC after updating unbranded firmware = (N910FOXX1COH1)]. The firmware was not working properly and had glitches.
Now i want to flash its stock EE Firmware which i have downloaded. I tried to flash it with ODIN but then i noticed that the CSC was changed so i tried to change the CSC by rooting the phone and for that i reboot the phone in Download Mode. The phone usually goes to black screen and does not start after proper power off and I need to soft reset it (By pulling the battery and draining battery charges) in order to turn it on everytime. After a couple of restarts in this way, the phone finally stopped to turn on. In download mode i had an error of "PIT File not found" while i tried to root it through ODIN. I tried to normal boot the phone but now it doesnt boot at all.
I need to boot it so that i may change my CSC to flash my stock firmware (please tell me if changing CSC would be necessary, Current CSC = N910FOXX1COH1,
Required CSC = N910FEVR1DPE1)
Any help would be appreciated. Thanks
Try to flash your EE rom with pit file for note 4 910f.
http://forum.xda-developers.com/not...te-4-pit-files-repartiton-f-g-c-t-w8-t3282641
Chamaka said:
Try to flash your EE rom with pit file for note 4 910f.
http://forum.xda-developers.com/not...te-4-pit-files-repartiton-f-g-c-t-w8-t3282641
Click to expand...
Click to collapse
Thanks for the reply !
Is it necessary to change the csc to UK region before flashing the UK firmware ? My phone is not booting to download mode either right now. Earlier today it was booting infact i tried to exit from download mode 2 times by pulling the battery but every time it automatically reboot to download mode. That was the moment when i shut down the phone by pressing home + power and after that it doesnt turn on
UK firmware includes UK csc. Then you don't need to change it manually.
But if your phone won't turn on I don't know how to recover it. (try to Recharge your phone and then go to download mode. I think your battery is fully discharged. )
If you can able to access download mode, flash firmware with the pit file using Odin.
Chamaka said:
UK firmware includes UK csc. Then you don't need to change it manually.
But if your phone won't turn on I don't know how to recover it. (try to Recharge your phone and then go to download mode. I think your battery is fully discharged. )
If you can able to access download mode, flash firmware with the pit file using Odin.
Click to expand...
Click to collapse
Thanks for the reply. I am trying to arrange another note 4 through which i can charge the battery. Ill give this idea a try and will let you know ! Thanks
I charged the battery but still the phone wont turn on
I think i have fried the boot loader !
Ma note 4 wont turning on and showing connect hs usb qdloader 9008 no flahing not charging want help please help
I have an S7 edge running the latest BTU firmware DQG1.
I have tried to flash it via Odin to EVR which failed. The phone is stuck on an error has occurred while updating the device.
It is not detectable via Samsung Smart.
I have tried to reflash it with DQG1 and it starts and then half way through fails.
Have I killed it? Please help I've only had it a week.
Here is what you can do, if it fails, then yes you have bricked your device... If not, hurray!
1. Charge your phone to 80%
2. Put your phone in download mode.
3. Uninstall, redownload and reinstall the driver for your phone. You can use the device manager in Windows for this.
4. Get the stock firmware with BTU CSC which is the default.
5. Use a new USB cable to connect the phone to the PC, this will eliminate the error IF its cable related.
6. Flash the new software
7. Pray
8. If all goes well, you'll have a working phone....
I tried again last night with a different USB cable and the latest BTU and it is now back up and running.
Next question is how do I get it on EVR firmware ?
Hi everybody..
first thing first, sorry for my bad english..
I got my samsung S7 Edge (SM-G935FD) trapped on bootloop since last week. i tried to enter recovery menu, but it's not work. the device stuck at android robot picture.
my phone can enter download mode. i already tried to reflash it using smart switch. but, after i enter model name and S/N, smart switch shows that SM-G935FD does not support initializing. please contact our service center.
i have no idea what happened to my phone. it works good until last week.
anybody have any idea how to fix my phone?
i have unroot phone and stock firmware.
please help me..
Thanks...
Odin.
Odin is your God.
Try Odin.
Core3Trio said:
Hi everybody..
first thing first, sorry for my bad english..
I got my samsung S7 Edge (SM-G935FD) trapped on bootloop since last week. i tried to enter recovery menu, but it's not work. the device stuck at android robot picture.
my phone can enter download mode. i already tried to reflash it using smart switch. but, after i enter model name and S/N, smart switch shows that SM-G935FD does not support initializing. please contact our service center.
i have no idea what happened to my phone. it works good until last week.
anybody have any idea how to fix my phone?
i have unroot phone and stock firmware.
please help me..
Thanks...
Click to expand...
Click to collapse
Hey u using ...9350fd ..me ..too volte is not working mate help .....
I have sam issue on samsung a5 (a510fd-2016) indian version and try to flash by different firmware but flashing failed at cm.bin file i used a latest firmware also so i want to software upgrade by samsung smart switch but its say a510fd does not support initializing if any one have a proper idea please share
Hey guys, I had an old Samsung J500FN and decided to buy a new battery and use it.
After installing the battery the phone turned on normally saying "custom binary blocked by frp" so I decided to flash the original firmware from sammobile using odin.
After flashing the firmware and getting a "PASS" in odin the phone is completely dead, not charging, not turning on, no download mode, no recovery mode, nothing.
Does anyone have and ideas how i can fix it?
Thanks in advance.