Hey guys i really need help i'm in a pickle as i soft bricked my phone LG G2 F320L. I did that last time but somehow i got my laptop to recognize my phone but this time it's not being recognized and i forgot how to. When i use LGUP it shows "Model:uknown,Please select a model" and in flash tool it goes up to 2 percent in the third step and then says try again by removing the battery. I even tried PC suit but i can't seem to make it work. Any help?
Related
Hello everyone
I have a LG L5 and I went install a custom ROM.
I was been ROOT, nothing problems, after I try install CWM, but my phone brick.
In the screen only I could only see the LG Logo and the legend ''downloading''
Next, I was try with KDZ Updater, and LG Update Tool, but didn't work.
In my despair, I was try with LG Flash Tool, but with a ROM different of my phone.
Now, my phone is dead, when I connect to my PC only I can see ''unknown device'', no one signal of life.
Thanks for you help
Sorry for my bad english
Take out battery.
Volume DOWN or Volume UP dont remember wich one but one of them for sure.
Plug USB cable from PC to phone WITHOUT battery it should start in emergency mode if TOTALLY not dead
Then flash correct KDZ firmware via KDZ tool
struart said:
Take out battery.
Volume DOWN or Volume UP dont remember wich one but one of them for sure.
Plug USB cable from PC to phone WITHOUT battery it should start in emergency mode if TOTALLY not dead
Then flash correct KDZ firmware via KDZ tool
Click to expand...
Click to collapse
Sorry for response late, I try this method, but no life signals, only one sound on my PC, and the "unknown device'' I was re-install the drivers with LG mobile support tool
Lg g2 D802 32GB
Got my phone bricked once when trying to install lollipop rom.
After successfuly restoring it and getting the 16GB error and fixing it I restored to stock 4.2.2 and in recovery accidently installed the KK bootloader and rebooted instead of installing the rom.
No download mode.
No recovery.
First phone booted and then the screen turned off and was only sounds (Booting in, connecting to pc, etc.)
Now nothing.
the only thing I managed to enter is the Hard button mode....
I tried every forum,thread,files,method mentioned exept the "Open the phone to pieces and tinker with it" method mentioned here somewhere.
If there is some hope for me before going to a repair shop and hopefully someone there smarter than me and can actually fix it... would really appreceate every advice you might have on the matter.
Thank you.
I here by declare the LG g2 D802 32GB UNbrickable
What I did to fix it.
Some of it I dont understand...
My specs:
Windows 8.1 64 bit
Ubuntu 64bit on Vmware
lg g2 drivers(mixed, I had pdanet drivers, adb drivers so not sure which)
What i did:
1- adb devices on windows
Seen what I have in the picture
adb reboot recovery/bootloader/reboot/fastboot
Until I saw some writings and phone entered this state:
http://forum.xda-developers.com/showthread.php?t=2582142
Using this files:
(because its a 32GB variant) in ubuntu I did the instructions
http://www.mediafire.com/download/3qyac22qat2aucj/D802_20B32GB.zip
then unplugged phone
Fully power off
Hold volume up button
DOWNLOAD MODE.
And from there its all history....
Hope it helps someone here
Briked my lg g2 d802
first bricked attempt phone get into fastboot after flashing laf.img recovery.img it back into lg logo.... ill try flashing kdz phone stuck on lg logo cant boot further and try same method on flashing tot got same result m all stuck on lg logo not going further no recovery mode only stuck at lg logo and download mode.. please help trying since two day
Acolis said:
Lg g2 D802 32GB
Got my phone bricked once when trying to install lollipop rom.
After successfuly restoring it and getting the 16GB error and fixing it I restored to stock 4.2.2 and in recovery accidently installed the KK bootloader and rebooted instead of installing the rom.
No download mode.
No recovery.
First phone booted and then the screen turned off and was only sounds (Booting in, connecting to pc, etc.)
Now nothing.
the only thing I managed to enter is the Hard button mode....
I tried every forum,thread,files,method mentioned exept the "Open the phone to pieces and tinker with it" method mentioned here somewhere.
If there is some hope for me before going to a repair shop and hopefully someone there smarter than me and can actually fix it... would really appreceate every advice you might have on the matter.
Thank you.
I here by declare the LG g2 D802 32GB UNbrickable
What I did to fix it.
Some of it I dont understand...
My specs:
Windows 8.1 64 bit
Ubuntu 64bit on Vmware
lg g2 drivers(mixed, I had pdanet drivers, adb drivers so not sure which)
What i did:
1- adb devices on windows
Seen what I have in the picture
adb reboot recovery/bootloader/reboot/fastboot
Until I saw some writings and phone entered this state:
http://forum.xda-developers.com/showthread.php?t=2582142
Using this files:
(because its a 32GB variant) in ubuntu I did the instructions
http://www.mediafire.com/download/3qyac22qat2aucj/D802_20B32GB.zip
then unplugged phone
Fully power off
Hold volume up button
DOWNLOAD MODE.
And from there its all history....
Hope it helps someone here
Click to expand...
Click to collapse
How did you get to adb?, i have a bricked device that shows only QHSUS_BULK without drivers
Faddy132 said:
first bricked attempt phone get into fastboot after flashing laf.img recovery.img it back into lg logo.... ill try flashing kdz phone stuck on lg logo cant boot further and try same method on flashing tot got same result m all stuck on lg logo not going further no recovery mode only stuck at lg logo and download mode.. please help trying since two day
Click to expand...
Click to collapse
Stay calm buddy, LG G2 is unbrickable, I had the same problem, I thought that I have bricked it, but fix was simple, I had only download mode, but KDZ restore stucked, what I did was just wait some time, cause LG flash tool has some problems with loading files, it just takes some time, so load it from your folder(kdz) , then wait some time and after that just start it, then you have to be patient cause it takes some time, I experienced some errors too, so just dont unplug it and wait, relax, it works
I have D802 32gb czech version
I flashed v30a Italy version and it works
just flash the right version
MosesTheTool said:
How did you get to adb?, i have a bricked device that shows only QHSUS_BULK without drivers
Click to expand...
Click to collapse
does the phone being recognized in windows when you start adb and using adb devices command?
you can use this to install ADB and run it from CMD in windows:
http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Acolis said:
does the phone being recognized in windows when you start adb and using adb devices command?
you can use this to install ADB and run it from CMD in windows:
http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Click to expand...
Click to collapse
No it doesn't, i have ADB, i know how to use it, i already saved one D800 that was in Fastboot.
Problem is, i used the debrick method, i succeeded, but now the device is recognized as LG but the screen stays black. It's acting a bit weird, it flashes with LG FLASH TOOL, although i believe it's not even in Download mode, but the screen keeps staying black.
Stuck at logo
janmynar said:
Stay calm buddy, LG G2 is unbrickable, I had the same problem, I thought that I have bricked it, but fix was simple, I had only download mode, but KDZ restore stucked, what I did was just wait some time, cause LG flash tool has some problems with loading files, it just takes some time, so load it from your folder(kdz) , then wait some time and after that just start it, then you have to be patient cause it takes some time, I experienced some errors too, so just dont unplug it and wait, relax, it works
I have D802 32gb czech version
I flashed v30a Italy version and it works
just flash the right version
Click to expand...
Click to collapse
still stuck at logo flashing same version kdz twice and thrice result is same.. i think i jz RIP my phone.. I have lg g2 D802 international variant if you have any other solution to wake my phone so tell me bro.. its makes me so frustrated..
Hello XDA-Community
Today i accidently briked my G2 (D802 KitKat 4.4.2). I was flashing it because i wanted to unroot it but during the process an error showed up and my phone was dead.
So i tried to fix it with this method http://forum.xda-developers.com/showthread.php?p=48765620#post48765620 but it didn't worked as planned.
Now i have an G2 which is stuck in a bootloop and i can't even reach the recovery or the download mode and i don't have any custom recovery installed.
Anyone who can help me with this get's an 10€/$ PSC. I can't give more because i dont have any money left (16 years old).
Big thanks to everyone who can help me with this
PS: Sorry for my bad english i'm not a native speaker
While you wait for an answer make sure your phone is kept charged.
Have you tried LG flashtool and your stock ROM?
make sure it's off, hold the VOLUME UP button while plugging it into your computer, and that should get it into download mode.
Next try using the TOT method (google it) and voila!
Yeah the problem is that i can't even reach the download mode and my computer doesn't recognize my phone it's just an qshub device. ;(
I had the same issue bricking my lg g2 and i was stuck with the logo and nothing more not even download mode,recovery etc...
The way i got it to stock was i installed the lg g2 drivers and from there on just flashed it with flashtools kdz and got it workking again i think this shoould help you out just plug your phone and install the drivers and use flashtools
Install this driver then report me back or cap screen device manager to me.I will help you for fee.
https://www.dropbox.com/s/a69s06mkpzao01m/qhsusb_bulk_DRIVER_G2.zip?dl=0
Hello all,
Recently My LG G2 broke for no reason . I was playing music and then it just stopped working. Then it stuck at booting loop logo.
Then I tried LGFlash tools 2014 with AU Vodafone D802T30a_00.kdz. It started firmware update but there was some error came in and asked me to remove battery and connect to micro USB again and retry.
But It did not work and stuck at the firmware upgrade screen.
Then I tried using SRKtools_2.1_droidth.zip, and tried to unbrick it. but I think it did not work properly. I remember my phone is not rooted.
Currently if I try to start my phone I see only LG logo and then it turns off.
If I try to connect it to the laptop, it opens lost of different drives and asks me to format but doesn't allow formatting due to write protection.
I tried to root the device using SRK tools but it is not recongnising device or asks me to select device in manual mode.
Can some one please help me in this situation. I want make my phone back in Life....
THank you
AMoL
Hello.
First, sorry for my bad english..
I got the F800L model and I rooted the device following the guide of Dirty Santa.
One day I read in forum that someone was able to flash H918 rom to the F800L device.
So I tried to do same.. but with the mistake of not backing up my original rom.
When I tried to flash the H918 rom through TWRP, it installed well, but when it booted, it just remained hanged in LG logo.
I just left it over a day waiting if it pass the LG logo. But it didn't.
Then I searched for the fix and read the guide about restoring the bricked device through LGUP and kdz file.
So I entered in download mode and connected to PC.
Executed LGUP software and my device appeared in H91810i model instead of F800L. I downloaded the F800L kdz file and tried to restore with LGUP but it appeared error saying kdz invalid.
So I managed to download the H918 10i kdz file and tried again to restore.. and WOW! it completed the process.
But.. Now my device is in worse condition. It doesn't even turn on.
Tried to enter again in download mode but nothing happens.. neither enters in fastboot mode...
Pulled out the battery and reinserted, and tried to turn on but nothing happens..
Can anybody help me please???
I think you destroyed your phone
You should get it to repair service
lol, u just facing the same problem with me, i did exactly the same what u do, was looking around for solution, but nothing really helpful out there, the only way i found is the method with sd card, u get the debrick img file, burn it to a 32gb sd card with the right tool, put sd card to your phone and hope it will get to downloadmode or fastboot or whatever idknow cause i'm don't have the debrick.img file for F800L, looking for it right now, people say u can get that file from the phone (has same model) that still working, that all i know for now, if u found anyway to fix your phone please told me :highfive:
It has been repeated over and over and over "DO NOT FLASH ANYTHING THAT IS NOT MEANT FOR YOUR DEVICE" and also "FLASH AT YOUR OWN RISK". Both of them together makes it pretty clear that you shouldn't have flashed something that was meant only for the h918 into an f800l variant. Developers dont write this down as fancy words or for fun. They do it in order to let everybody know that if flashed, it could easily alter your system in such a way that it might never be fixed except by the company itself. By flashing something that wasnt meant for your device, you are trying to override the system with an image. And if the developer never made the source compatible with yours, then software and hardware will be contradicting each other. The motherboards of the phones comes for its specific variants and only developers can alter an image of a system to make it somewhat compatible with the variant.
Now, lets hope you get an answer to how to fix it because LG wont be fixing it for you since you voided your warranty by a) the simple fact of unlocking the bootloader (which is pretty easy to identify since it shows the warning sign when you turn the phone on), and b) you rooted the device. And LG wont work with neither of those. Unless.... and this is a maybe because i dont know if they would agree too (if you pay the sum they request to fix it, which i assure you it will be more that $100+ maybe even significantly more). Then they fix it for you.
I personally made a backup in a separated MIcro SD card i have outside the phone. So that if i have problems with my system, then i just insert that micro sd card and restore the backup.
Good luck!
If the phones screen is blank when you try to turn it on you bricked. Only fix is a replacement. There is NO debrick.img
oh my god, if u stop at the step KDZ tool found your device that H918, I can help you. Just boot to fastboot mode and fastboot the file name bootbackup.img and KDZ tool will found your device is F800L then KDZ normally. Sorry for my bad English.
gamza88 said:
Hello.
First, sorry for my bad english..
I got the F800L model and I rooted the device following the guide of Dirty Santa.
One day I read in forum that someone was able to flash H918 rom to the F800L device.
So I tried to do same.. but with the mistake of not backing up my original rom.
When I tried to flash the H918 rom through TWRP, it installed well, but when it booted, it just remained hanged in LG logo.
I just left it over a day waiting if it pass the LG logo. But it didn't.
Then I searched for the fix and read the guide about restoring the bricked device through LGUP and kdz file.
So I entered in download mode and connected to PC.
Executed LGUP software and my device appeared in H91810i model instead of F800L. I downloaded the F800L kdz file and tried to restore with LGUP but it appeared error saying kdz invalid.
So I managed to download the H918 10i kdz file and tried again to restore.. and WOW! it completed the process.
But.. Now my device is in worse condition. It doesn't even turn on.
Tried to enter again in download mode but nothing happens.. neither enters in fastboot mode...
Pulled out the battery and reinserted, and tried to turn on but nothing happens..
Can anybody help me please???
Click to expand...
Click to collapse
hi did you find any way to help ? i m in similar position
me2151 said:
If the phones screen is blank when you try to turn it on you bricked. Only fix is a replacement. There is NO debrick.img
Click to expand...
Click to collapse
Hello My Friend,
I have F800s and I rooted by your methos and did exactly the same thing as OP installed H918 rom through twrp. Now I can only go in download mode and LGUP reads my phone as H918 what should I do please help .