Related
Hey guys
i have managed to run ubuntu on our SG3
all thanks to andro-linux guys
this guide works like a charm
http://androlinux.com/android-ubuntu-development/how-to-install-ubuntu-on-android/
and marcellusbe for the kernel
whats the point? :/
Thats nice Ubuntu version?
Pretty cool but ubuntu on my pc is enough for me
Sent from my GT-I5800 using XDA App
it can runs on sg3 perfectly?
I've never used ubuntu on my pc
What are its advantages on our G3?
Sent from the 3rd Galaxy !
Please answer this?
Hey Im planning to install ubuntu based on your thread I have downloaded the ubuntu.zip file and now I just want to confirm will it run perfectly on my Galaxy 3? Will it conflict in any way with my operating system? Will it function properly without any possible problem? And also which kernel can support loop devices? Please answer my question. Hope you reply soon. Thanx in advance.
android.aimad said:
Hey Im planning to install ubuntu based on your thread I have downloaded the ubuntu.zip file and now I just want to confirm will it run perfectly on my Galaxy 3? Will it conflict in any way with my operating system? Will it function properly without any possible problem? And also which kernel can support loop devices? Please answer my question. Hope you reply soon. Thanx in advance.
Click to expand...
Click to collapse
no its not conflicting with anything
i checked i was able to recieve calls messages perfectly
just make a point of 1-2 things
when in android vnc server u need to give nick as root and pass as whatever u set
besides Ip localhost (127.0.0.1) and port 5901
and the color format should be 24color (4bpp) and it works awesome
i am using gnome havent installed XDE
Lol, i like it.
Sent from my GT-I5800 using Tapatalk
kyrillos13 said:
Thats nice Ubuntu version?
Click to expand...
Click to collapse
a bit old
kramic 9.10
@peldax
will try it now XD
some screenshots would be good.
have downloaded the zip file...but from the above post it seems like the resolution is not enough for it's proper functioning ?? is it true ??
secondly,what is the method for reverting back to android ??
niteshtak said:
have downloaded the zip file...but from the above post it seems like the resolution is not enough for it's proper functioning ?? is it true ??
secondly,what is the method for reverting back to android ??
Click to expand...
Click to collapse
resolution aint a problem
u have scaling option ... u can fit it to screen
or put it zoomable where u can float the full screen
well the android is running
ubuntu is in chroot mode
that is that android is running as usual and ubuntu is just running over it
that means its using the linux/ android /(marcellusbe's kernel)
for going back just hit the home key
and to go back go back to android vnc viewer (long press home key and select)
** this will work untill u have manually shutdown ubuntu from terminal emulator/adb or something
rudolf895 said:
some screenshots would be good.
Click to expand...
Click to collapse
hmmm
how do we do that ?
i dont know and dont have a camera
mcd_legend said:
hmmm
how do we do that ?
i dont know and dont have a camera
Click to expand...
Click to collapse
Hold back key and press HOME..
Sent from the 3rd Galaxy !
wow thats cool
after i typed 'apt-get update'it shows 'could not resolve ports.ubuntu.com'
can anyone give me a help?
dxdiag32 said:
after i typed 'apt-get update'it shows 'could not resolve ports.ubuntu.com'
can anyone give me a help?
Click to expand...
Click to collapse
that requires internet connection
so make sure u are connected to wifi / network data
it was about 7 MB i remember for me
Rapier07 said:
Hold back key and press HOME..
Sent from the 3rd Galaxy !
Click to expand...
Click to collapse
can u also tell me where do they get saved ?
Q&A for [ROM][31-Dic][5.0][N9005][XXUGBNL8]CRASH ROM V1 [Aroma Installer]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][31-Dic][5.0][N9005][XXUGBNL8]CRASH ROM V1 [Aroma Installer]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
menioseten said:
As always battery life is excellence.
Thanks.
Click to expand...
Click to collapse
As always,you ''forget'' to say that your battery is a zerolemon.
Crash i have a problem,
I uninstall some apps and when i reboot my phone the apps reinstalled themselves
I uninstalled them normally from aplication menu.
Any clue why this might happen?
Anyways thanks excellent rom again!!
ibizamaniak said:
As always,you ''forget'' to say that your battery is a zerolemon.
Click to expand...
Click to collapse
Stock battery my friend.My stats today .
Hello crash and a happy new year..as always your rom is perfect..only one problem,when i open sketchbook i get a message that it closed..can you help me?
KyriaZ said:
Crash i have a problem,
I uninstall some apps and when i reboot my phone the apps reinstalled themselves
I uninstalled them normally from aplication menu.
Any clue why this might happen?
Anyways thanks excellent rom again!!
Click to expand...
Click to collapse
I really don't know doesn't happened to me but i will have a look on it
Thanks
sbassios said:
Hello crash and a happy new year..as always your rom is perfect..only one problem,when i open sketchbook i get a message that it closed..can you help me?
Click to expand...
Click to collapse
Thanks for report looks like is a problem from the base try to unistall and re installed from Samsung Store i will fix that in future releases
Hugs
Sent from my SM-N9005
Crash said:
I really don't know doesn't happened to me but i will have a look on it
Thanks
Thanks for report looks like is a problem from the base try to unistall and re installed from Samsung Store i will fix that in future releases
Hugs
Sent from my SM-N9005
Click to expand...
Click to collapse
I cant find it on samsung store..also i have the message report 'on' and i dont have notification and sound..
1. Install ZIP using MOP / CWM / TWRP, remember to tick "Wipe data" if you are coming from KitKat
Click to expand...
Click to collapse
Hi I'm a crash rom user from KK.. wondering what zip will I install? is this the CRASH_ROM_V1_N9005XXUGBNL8.zip?
Sorry newbie here
Crash also i have the alarm clock on and for a reason after 10minutea it gets off..can you help me?
mikaelo03 said:
Hi I'm a crash rom user from KK.. wondering what zip will I install? is this the CRASH_ROM_V1_N9005XXUGBNL8.zip?
Sorry newbie here
Click to expand...
Click to collapse
Yes my friend
Sent from my SM-N9005
Moving from Lollipop to Kitkat
Hi Crash,
I have flashed the latest Crash V1 (lollipop) update in my Note 3. Is there any way I can go back to Crash V19 (4.4). If I flash Kitkat firmware through odin will it work?
Crash you say battery tweaks in v.1,5..can you say us what tweaks?
Thanks crash for nice ROM
everything is grate but I can't set ringtone to silent mode (DONT HAVE MENU)
I need silent mode when meeting, please help me.
Thanks crash for nice ROM
everything is grate but I can't set ringtone to silent mode (DONT HAVE MENU)
I need silent mode when meeting, please help me.
dawjung said:
Thanks crash for nice ROM
everything is grate but I can't set ringtone to silent mode (DONT HAVE MENU)
I need silent mode when meeting, please help me.
Click to expand...
Click to collapse
Lollipop doesn't have silent mode use Google read about it
Enviado desde mi SM-N9005
---------- Post added at 08:32 AM ---------- Previous post was at 08:31 AM ----------
anvikram said:
Hi Crash,
I have flashed the latest Crash V1 (lollipop) update in my Note 3. Is there any way I can go back to Crash V19 (4.4). If I flash Kitkat firmware through odin will it work?
Click to expand...
Click to collapse
If you follow the installation steps on post 1 yes you can go back to KK simple flash any KK rom with fullwipe.
Enviado desde mi SM-N9005
Oh I haven't read its. Thank you so mush
1.5 - don't work auto Brightness
Nice one
I flashed crash v1.5 and i've little problem. I was copy music from pc to phone card via cable and few times connection was lost and device disappeard from 'my computer'. I must disconnect phone and plug to another port. Is it a problem with rom or maybe system?
Founded issues
Delivery reports on sms doesn't work and I have also problem with alarm clock. It doesn't work too. But about alarm clock problem, I saw on internet that is Lollipop problem or? I have instalation with full wipe.
Only if the two lines from top are displaying different values for PARTS and PHONE firmware then you would
1. Dial *#2663# in the dialer
2. Click on TSP FW UPDATE (General) it shouldn't need a reboot
3. Make sure PARTS and PHONE show the same values
4. Inverted Touch Screen Fixed
THANKS GOES TO @Wuby986
Hey thanks for credits..
is there a lot of people suffering from this?
i originally had the problem because i am an idiot (yesss)... too fast reading in CF-root download page and i flashed the edge package over a flat device (ouch)... luckly i found how to fix easy
did you guys flashed the correct one?
Wuby986 said:
Hey thanks for credits..
is there a lot of people suffering from this?
i originally had the problem because i am an idiot (yesss)... too fast reading in CF-root download page and i flashed the edge package over a flat device (ouch)... luckly i found how to fix easy
did you guys flashed the correct one?
Click to expand...
Click to collapse
Yeah I've seen quite a few with this problem including me, yw!
MMDragonRanger said:
Yeah I've seen quite a few with this problem including me, yw!
Click to expand...
Click to collapse
Wooow this is scary... Well for this we have a workaround.. Let's just hope this is the only "surprize" we can get.. Thanks for share..
Also i would like to say that this is gonna help only if, once you are in the firmware page after dialing, the first two lines from top are displaying different values for part's and general firmware..
Hitting the tsp update is going to make those match
MMDragonRanger said:
Only if the two lines from top are displaying different values for PARTS and PHONE firmware then you would
1. Dial *#2663# in the dialer
2. Click on TSP FW UPDATE (General) it shouldn't need a reboot
3. Make sure PARTS and PHONE show the same values
4. Inverted Touch Screen Fixed
THANKS GOES TO @Wuby986
Click to expand...
Click to collapse
hi, can you help me. the dial don't want open this code.
U know why ? Thx a LOOOT !
neferym said:
hi, can you help me. the dial don't want open this code.
U know why ? Thx a LOOOT !
Click to expand...
Click to collapse
You have to be on a stock rom, there is an app that worked with my s5 to access those secret menus but i doubt it works with the s6
MMDragonRanger said:
You have to be on a stock rom, there is an app that worked with my s5 to access those secret menus but i doubt it works with the s6
Click to expand...
Click to collapse
yeah, whith this one, i can access to app : G920FXXU1AOD9_G920FOXA1AOD9_G920FXXU1AOD9_HOME.tar
Ty !
Thank you with all my heart, you just save my life... and my S6 920F !!!
There are at least 2 idiots on this planet, and the other was me ...
The phone has been running properly ..
Helpful Information thanks buddy ...:good:
it works!
thanks
MMDragonRanger said:
Only if the two lines from top are displaying different values for PARTS and PHONE firmware then you would
1. Dial *#2663# in the dialer
2. Click on TSP FW UPDATE (General) it shouldn't need a reboot
3. Make sure PARTS and PHONE show the same values
4. Inverted Touch Screen Fixed
THANKS GOES TO @Wuby986
Click to expand...
Click to collapse
---------- Post added at 02:28 PM ---------- Previous post was at 02:24 PM ----------
Dear it is fixed. Thanks a lot
Can someone help me? When I try to access this code through my dialer I get "Not Registered on Network". I flashed a new stock ROM through Odin and the problem still arises.
---------- Post added at 02:18 PM ---------- Previous post was at 02:15 PM ----------
steviecvr said:
Can someone help me? When I try to access this code through my dialer I get "Not Registered on Network". I flashed a new stock ROM through Odin and the problem still arises.
Click to expand...
Click to collapse
Sorry, a reboot fixed this. Thanks so much for this thread.
SwissGalaxy said:
Thank you with all my heart, you just save my life... and my S6 920F !!!
There are at least 2 idiots on this planet, and the other was me ...
Click to expand...
Click to collapse
Make that 3 idiots.
It didn't work for me..
Thanks a lot Mr wuby986,you save my life,after trying many methods on s6 reverted touchscreen,and all failed,tried yours and works,thanks a lot once again.
Worked for me!
I somehow got into this state on my T-Mobile Galaxy Note 4 (N910T) when I flashed the latest TWRP (v3.0.2-0). At first I flashed the .img using my existing TWRP 2.8.7, but then I was unable to boot into recovery. I then used ODIN to flash the .tar version which worked. However, after rebooting into the system my touch was all messed up. Thankfully the stylus worked just fine so I was able to use that to use my phone until I found this thread.
I did *#2663# in the dialer, saw my versions didn't match and did the update as per the OP. Everything is back to normal now!
This fixed my screen glitch. You make me love the internet. I found this page only after several hours of searching.
I had tried to update to TWRP 3.0 with the Android app but selected the wrong device (Note 4 Edge instead of Note 4).
I do have other problems. Recent and Back Button Not working
how to fix the recent button and back button of galaxy s6,it was working before then suddenly the button stop working even when you touch it its not showing any response or light..i did try to full factory reset in odin mode buts not fix the issue
please help im using the assististant menu for a while ands it really annoying
Tha ks
lanreb said:
This fixed my screen glitch. You make me love the internet. I found this page only after several hours of searching.
I had tried to update to TWRP 3.0 with the Android app but selected the wrong device (Note 4 Edge instead of Note 4).
Click to expand...
Click to collapse
So I have the same inverted screen problem! Although mine is across the Y-axis... Touch the left and the button on the right gets clicked.
I'm SURE what did it was installing TWRP 3.0! And now I see someone else had the same cause!
But I have a G920P running 5.0.2. (and I'd like to keep my firmware where it is). What can I do!? HELP!
I had root, but I needed to install a recovery so I could install Xposed Framework so I could enable a module. And here we are...
Update: This issue was solved for me. TWRP still won't boot, but at least my touch issue is gone.
Hello
after I tried some recoveries my toucscreen is now uncalibrated... It is not possible to use the phone anymore without the pen which works just fine....
Do you have an idea what I can do now?
Please help
Thank you
Search the forum, someone has already posted a solution.
Sent from my SM-N910F
JagDave said:
Search the forum, someone has already posted a solution.
Sent from my SM-N910F
Click to expand...
Click to collapse
I already searched the forum... But unfortunately cannot find it... For what could i search?
Ok for anyone having a similar problem, i think I found the solution:
torquadon said:
I got my touch screen calibration fixed 
Anybody having similar problems do the following:
dial *#2663# and update the touch FW by pressing "TSP FW update (General)
Not my idea, copied from cm12 thread.
Click to expand...
Click to collapse
Hi I have a Gw05 from aliexpress it has the mtk6572 and android funos it said in the ad it came with the playstore and it didnt so i tried to add the playstore and ended up in an error loop when idecided to add the files to the main system. My wife has the same watch in tact and I cant seem to get a working firmware from it using the mtk tools.
The only firmware I have been able to successfuly flash is from the Qw09 and the screen is 1/4 of the way down to far (there is like white fuzz in place where screen should be)
and it is upside down. My question is can I somehow flip and move the screen so it is correct?
If not does anyone have any funos firmware I can try mt6572 and if not
can you tell me how to get the working firmware from my wifes watch or point me to a link that tells me in english how to do it. thanks
NEverman all fixed
adambomb_13 said:
Hi I have a Gw05 from aliexpress it has the mtk6572 and android funos it said in the ad it came with the playstore and it didnt so i tried to add the playstore and ended up in an error loop when idecided to add the files to the main system. My wife has the same watch in tact and I cant seem to get a working firmware from it using the mtk tools.
The only firmware I have been able to successfuly flash is from the Qw09 and the screen is 1/4 of the way down to far (there is like white fuzz in place where screen should be)
and it is upside down. My question is can I somehow flip and move the screen so it is correct?
If not does anyone have any funos firmware I can try mt6572 and if not
can you tell me how to get the working firmware from my wifes watch or point me to a link that tells me in english how to do it. thanks
Click to expand...
Click to collapse
I'm having the same problem xD i beleve i asked you in another post.
It seems impossible to find the stock firmware or other that correctly fits...
If you have any news of you could do a backup please share i don't know what more to do at this point.
Albayeah said:
If you have any news ...
Click to expand...
Click to collapse
May be at least the screen rotation part can be healed with this software, where the screen rotation is one of available actions.
chinesesmartwatch said:
May be at least the screen rotation part can be healed with this software, where the screen rotation is one of available actions.
Click to expand...
Click to collapse
Hey thanks for sharing ^^ I've tried the app but i'm still having 1/4 of screen not showing image, it's like screen moved down. I liked the app so i will use it when i have a full working watch xD... Now i guess only solution is re-installing original firmware
Thank you
Albayeah said:
but i'm still having 1/4 of screen not showing image
Click to expand...
Click to collapse
You can experiment with the wm command. Start shell using adb and next try wm command, it will list it's options. There is the overscan option which can move screen by xLeft,yTop,xRight,yBottom. I haven't the issues like yours and not sure if it will help, but you can try.
How to get rom
How to get stock rom original factory gw05 ?
Please, i need your help guys... ?