Hello
after I tried some recoveries my toucscreen is now uncalibrated... It is not possible to use the phone anymore without the pen which works just fine....
Do you have an idea what I can do now?
Please help
Thank you
Search the forum, someone has already posted a solution.
Sent from my SM-N910F
JagDave said:
Search the forum, someone has already posted a solution.
Sent from my SM-N910F
Click to expand...
Click to collapse
I already searched the forum... But unfortunately cannot find it... For what could i search?
Ok for anyone having a similar problem, i think I found the solution:
torquadon said:
I got my touch screen calibration fixed 
Anybody having similar problems do the following:
dial *#2663# and update the touch FW by pressing "TSP FW update (General)
Not my idea, copied from cm12 thread.
Click to expand...
Click to collapse
Related
On my s4, I keep getting the "updating camera firmware please wait" message for my camera. From search, I've learned that I need to flash to stock kernel for it to update and go away. I've searched for the At&t stock kernel, but I cannot find any links leading to the right place.
I apologize if this issue has been solved already, maybe I am just blind and cannot find it via search/google.
Thank you!
enarr said:
On my s4, I keep getting the "updating camera firmware please wait" message for my camera. From search, I've learned that I need to flash to stock kernel for it to update and go away. I've searched for the At&t stock kernel, but I cannot find any links leading to the right place.
I apologize if this issue has been solved already, maybe I am just blind and cannot find it via search/google.
Thank you!
Click to expand...
Click to collapse
it is at the bottom of my guide here...attachment.
http://forum.xda-developers.com/showthread.php?t=2295557
Thanks you.
TheAxman said:
it is at the bottom of my guide here...attachment.
http://forum.xda-developers.com/showthread.php?t=2295557
Thanks you.
Click to expand...
Click to collapse
Thank you so much!
enarr said:
Thank you so much!
Click to expand...
Click to collapse
Your welcome.
Please use the thanks button, and use that where you can, more people will help you more, just a suggestion. It really does wonders.
You need any help, let me know.
sup guys
my lg-e460 touch screen stop work after bad flash and i flash him again with right flash still not work
any solution please guide me to the right solution
MHO _ TCOM said:
sup guys
my lg-e460 touch screen stop work after bad flash and i flash him again with right flash still not work
any solution please guide me to the right solution
Click to expand...
Click to collapse
I have the same problem, does anyone have any solution?
ptrVoid said:
I have the same problem, does anyone have any solution?
Click to expand...
Click to collapse
Hello Friends,
I have the same problem. Do you have solved it?? My touchscreen has died after a bad flash.
King regards.
F
Can somebody tell me which Philz recovery i need for my rooted s4. I9505LTE please ?
I have tried a couple which i thought, but they did'nt work.
A link to the right one would be nice please.
Thanks in Advance.
manimaluk said:
Can somebody tell me which Philz recovery i need for my rooted s4. I9505LTE please ?
I have tried a couple which i thought, but they did'nt work.
A link to the right one would be nice please.
Thanks in Advance.
Click to expand...
Click to collapse
You need the one for i9505 - ie jflte... it's linked in the relevant thread
I've done that but when i reboot pressing the three buttons & releasing it doesn't go into recovery. Maybe i'm releasing at the wrong time. What is the correct procedure. ?
It's ok, I've sorted it. Think I've got a dodgy centre button. Thanks.
manimaluk said:
It's ok, I've sorted it. Think I've got a dodgy centre button. Thanks.
Click to expand...
Click to collapse
3 buttons? You only need volume up and power...home key is irrelevant
Yeah. ...I've been used to having an s3 lol.
Only if the two lines from top are displaying different values for PARTS and PHONE firmware then you would
1. Dial *#2663# in the dialer
2. Click on TSP FW UPDATE (General) it shouldn't need a reboot
3. Make sure PARTS and PHONE show the same values
4. Inverted Touch Screen Fixed
THANKS GOES TO @Wuby986
Hey thanks for credits..
is there a lot of people suffering from this?
i originally had the problem because i am an idiot (yesss)... too fast reading in CF-root download page and i flashed the edge package over a flat device (ouch)... luckly i found how to fix easy
did you guys flashed the correct one?
Wuby986 said:
Hey thanks for credits..
is there a lot of people suffering from this?
i originally had the problem because i am an idiot (yesss)... too fast reading in CF-root download page and i flashed the edge package over a flat device (ouch)... luckly i found how to fix easy
did you guys flashed the correct one?
Click to expand...
Click to collapse
Yeah I've seen quite a few with this problem including me, yw!
MMDragonRanger said:
Yeah I've seen quite a few with this problem including me, yw!
Click to expand...
Click to collapse
Wooow this is scary... Well for this we have a workaround.. Let's just hope this is the only "surprize" we can get.. Thanks for share..
Also i would like to say that this is gonna help only if, once you are in the firmware page after dialing, the first two lines from top are displaying different values for part's and general firmware..
Hitting the tsp update is going to make those match
MMDragonRanger said:
Only if the two lines from top are displaying different values for PARTS and PHONE firmware then you would
1. Dial *#2663# in the dialer
2. Click on TSP FW UPDATE (General) it shouldn't need a reboot
3. Make sure PARTS and PHONE show the same values
4. Inverted Touch Screen Fixed
THANKS GOES TO @Wuby986
Click to expand...
Click to collapse
hi, can you help me. the dial don't want open this code.
U know why ? Thx a LOOOT !
neferym said:
hi, can you help me. the dial don't want open this code.
U know why ? Thx a LOOOT !
Click to expand...
Click to collapse
You have to be on a stock rom, there is an app that worked with my s5 to access those secret menus but i doubt it works with the s6
MMDragonRanger said:
You have to be on a stock rom, there is an app that worked with my s5 to access those secret menus but i doubt it works with the s6
Click to expand...
Click to collapse
yeah, whith this one, i can access to app : G920FXXU1AOD9_G920FOXA1AOD9_G920FXXU1AOD9_HOME.tar
Ty !
Thank you with all my heart, you just save my life... and my S6 920F !!!
There are at least 2 idiots on this planet, and the other was me ...
The phone has been running properly ..
Helpful Information thanks buddy ...:good:
it works!
thanks
MMDragonRanger said:
Only if the two lines from top are displaying different values for PARTS and PHONE firmware then you would
1. Dial *#2663# in the dialer
2. Click on TSP FW UPDATE (General) it shouldn't need a reboot
3. Make sure PARTS and PHONE show the same values
4. Inverted Touch Screen Fixed
THANKS GOES TO @Wuby986
Click to expand...
Click to collapse
---------- Post added at 02:28 PM ---------- Previous post was at 02:24 PM ----------
Dear it is fixed. Thanks a lot
Can someone help me? When I try to access this code through my dialer I get "Not Registered on Network". I flashed a new stock ROM through Odin and the problem still arises.
---------- Post added at 02:18 PM ---------- Previous post was at 02:15 PM ----------
steviecvr said:
Can someone help me? When I try to access this code through my dialer I get "Not Registered on Network". I flashed a new stock ROM through Odin and the problem still arises.
Click to expand...
Click to collapse
Sorry, a reboot fixed this. Thanks so much for this thread.
SwissGalaxy said:
Thank you with all my heart, you just save my life... and my S6 920F !!!
There are at least 2 idiots on this planet, and the other was me ...
Click to expand...
Click to collapse
Make that 3 idiots.
It didn't work for me..
Thanks a lot Mr wuby986,you save my life,after trying many methods on s6 reverted touchscreen,and all failed,tried yours and works,thanks a lot once again.
Worked for me!
I somehow got into this state on my T-Mobile Galaxy Note 4 (N910T) when I flashed the latest TWRP (v3.0.2-0). At first I flashed the .img using my existing TWRP 2.8.7, but then I was unable to boot into recovery. I then used ODIN to flash the .tar version which worked. However, after rebooting into the system my touch was all messed up. Thankfully the stylus worked just fine so I was able to use that to use my phone until I found this thread.
I did *#2663# in the dialer, saw my versions didn't match and did the update as per the OP. Everything is back to normal now!
This fixed my screen glitch. You make me love the internet. I found this page only after several hours of searching.
I had tried to update to TWRP 3.0 with the Android app but selected the wrong device (Note 4 Edge instead of Note 4).
I do have other problems. Recent and Back Button Not working
how to fix the recent button and back button of galaxy s6,it was working before then suddenly the button stop working even when you touch it its not showing any response or light..i did try to full factory reset in odin mode buts not fix the issue
please help im using the assististant menu for a while ands it really annoying
Tha ks
lanreb said:
This fixed my screen glitch. You make me love the internet. I found this page only after several hours of searching.
I had tried to update to TWRP 3.0 with the Android app but selected the wrong device (Note 4 Edge instead of Note 4).
Click to expand...
Click to collapse
So I have the same inverted screen problem! Although mine is across the Y-axis... Touch the left and the button on the right gets clicked.
I'm SURE what did it was installing TWRP 3.0! And now I see someone else had the same cause!
But I have a G920P running 5.0.2. (and I'd like to keep my firmware where it is). What can I do!? HELP!
I had root, but I needed to install a recovery so I could install Xposed Framework so I could enable a module. And here we are...
Update: This issue was solved for me. TWRP still won't boot, but at least my touch issue is gone.
Recently, Cyanogenmod got the feature for fingerprint scanners on the Samsung Galaxy S5. I updated my phone to the latest version and whenever I try to use my fingerprint scanner it allows me to save one but it gives me a "not recognized" message whenever used on the lockscreen. I've tried re-installing the ROM and even flashing Mokee ROM and it gives me the same message so I need some help.
before asking for help, read the forum rules and after that try too post in the right section with your question
ad0dh67 said:
before asking for help, read the forum rules and after that try too post in the right section with your question
Click to expand...
Click to collapse
I don't really use xda so I'm not really sure where to post this. Where would I post my question. (thanks for the reply btw)
For any questions you should post on the Galaxy S 5 Q&A, Help & Troubleshooting section. As @ad0dh67 said, before asking first read the rules and do a search about the topic you are trying to find out about first. There is one post on the General Section posted by the developer that got the fingerprint working. http://forum.xda-developers.com/galaxy-s5/general/fingerprint-opensource-romcm-mokee-t3315196 He basically states there that there are some devices in which fingerprint doesnt work yet at least for cm, If I recall correctly the G900T(T-Mobile) is one of them. I have one myself and it doesnt work for me either so we just have to wait and see what happens or you can install his rom and see if it works there.
http://forum.xda-developers.com/galaxy-s5/unified-development/rom-official-mokee-source-project-t3274171
Humo0915 said:
For any questions you should post on the Galaxy S 5 Q&A, Help & Troubleshooting section. As @ad0dh67 said, before asking first read the rules and do a search about the topic you are trying to find out about first. There is one post on the General Section posted by the developer that got the fingerprint working. http://forum.xda-developers.com/galaxy-s5/general/fingerprint-opensource-romcm-mokee-t3315196 He basically states there that there are some devices in which fingerprint doesnt work yet at least for cm, If I recall correctly the G900T(T-Mobile) is one of them. I have one myself and it doesnt work for me either so we just have to wait and see what happens or you can install his rom and see if it works there.
http://forum.xda-developers.com/gal...nt/rom-official-mokee-source-project-t3274171
Click to expand...
Click to collapse
I have the Canadian s5 and I have a friend that has a scanner that works so I'm not really sure what's going on
Mr.Freeman19 said:
I have the Canadian s5 and I have a friend that has a scanner that works so I'm not really sure what's going on
Click to expand...
Click to collapse
Maybe an obvious question, but do you swipe your finger over the scanner or just place it on it?
Stachura5 said:
Maybe an obvious question, but do you swipe your finger over the scanner or just place it on it?
Click to expand...
Click to collapse
I swipe like on stock
Mr.Freeman19 said:
I swipe like on stock
Click to expand...
Click to collapse
https://youtu.be/Abp-TX3Wb2E When I added the print
Mr.Freeman19 said:
https://youtu.be/Abp-TX3Wb2E When I added the print
Click to expand...
Click to collapse
Trying to use it
https://youtu.be/LsfIIR39jww
Hi,
I update this thread because i've same problem... On ROM Stock scanner works, but on custom (Resurrection or Cyanogen) doesn't works...
I tried wipe data, factory reset, install new ROM but same problem...
Nobody have solution ?
Thanks,
No one ?
Working fine for me
X-Sakyo said:
No one ?
Click to expand...
Click to collapse
Did you dirty flash the ROM?
I'm using the latest nightly on my G900F and the scanner works completely fine.
Finally works !
I update my baseband/bootloader version and all work !
Thanks guys :victory:
X-Sakyo said:
Finally works !
I update my baseband/bootloader version and all work !
Thanks guys :victory:
Click to expand...
Click to collapse
can you give the link that you use to update ? im getting the same error.
Agom said:
can you give the link that you use to update ? im getting the same error.
Click to expand...
Click to collapse
Xda thread
http://forum.xda-developers.com/galaxy-s5/development/dev-android-marshmallow-6-0-1-t3315038
Say if its work or not