Has anyone else seen this rom version on their ATT Galaxy Note 7?
n930aucu1apgc
http://imgur.com/a/Nx6un
Mine is dated August 1st.
N930AUCS1APH1
omegatotal said:
Has anyone else seen this rom version on their ATT Galaxy Note 7?
n930aucu1apgc
http://imgur.com/a/Nx6un
Click to expand...
Click to collapse
I have that firmwarre but im not sure which is the updated version. i assume its our version based on build number
but here's the build slayd1023 has
http://forum.xda-developers.com/att-note-7/how-to/sm-n930a-stock-odin-firmware-t3444006
H comes after G in the alphabet so the H version is most likely the newest version.
ShrekOpher said:
H comes after G in the alphabet so the H version is most likely the newest version.
Click to expand...
Click to collapse
Pretty sure that's not how the update conventions are read
N930AUC S1APH1
N930AUC U1APGC
I think based on the starting U1AP vs the S1AP actually determines which build is more current.
Case in point (for instance)
The T-Mobile Gear S2 Firmware:
R730TUVU1AOJ7_R730TTMB1AOJ7_USA T-Mobile Full FLash Firmware (original)
R730TUVU2BPC6_R730TTMB2BPC6_USA T-Mobile_4File Firmware (update)
domineus said:
Pretty sure that's not how the update conventions are read
N930AUC S1APH1
N930AUC U1APGC
I think based on the starting U1AP vs the S1AP actually determines which build is more current.
Case in point (for instance)
The T-Mobile Gear S2 Firmware:
R730TUVU1AOJ7_R730TTMB1AOJ7_USA T-Mobile Full FLash Firmware (original)
R730TUVU2BPC6_R730TTMB2BPC6_USA T-Mobile_4File Firmware (update)
Click to expand...
Click to collapse
When you look at the image OP posted it states July. The one I posted about states August.
Therefore:
N930AUC U1APGC (original)
N930AUC S1APH1 (update)
So I am wondering, did anyone else power on their phones out of the box and bypass all of the setup process to check firmware versions before inserting sim or connecting to a network?
Is it possible I have one of the earliest revisions of this phone compared to others?
I am mainly curious now because of this whole battery failure fiasco. I really do not want to wait to get a replacement and not be able to root due to an update.
this just appeared on a google search, wasn't out there(or indexed) previously.
http://www.samsung.com/us/support/answer/ANS00060348/
Related
Even though Samsung hasn't released their stretched out Galaxy Note, they have released the firmware for their SHW-M480K/SHW-M480S through the Samsung Open Source Website. Both files are 175 MB in size, and are the South Korean versions of the firmware. I am looking forward to the development this tablet is going to get
Link to Download: http://opensource.samsung.com/reception/receptionSub.do?method=search&searchValue=SHW-M480
HI my note 10.1 is the shw-m480w is the wifi version bough tin korea
how does translates to the other code names so i can flash a custom rom?
Thx in adv
tatuz said:
HI my note 10.1 is the shw-m480w is the wifi version bough tin korea
how does translates to the other code names so i can flash a custom rom?
Thx in adv
Click to expand...
Click to collapse
International 3G version: GT-N8000
International Wifi version: GT-N8010
USA Wifi version (Adds IR blaster, no other known differences): GT-N8013
There's a good chance the SHW-M480W has some differences from the N8010/N8013 - For example, most Korean devices have DMB receivers.
Right now, there is not much released for the wifi variants, as the international 3G version (N8000) was released more than a week earlier than the wifi version - N8013 didn't become available until last Thursday.
Entropy512 said:
International 3G version: GT-N8000
International Wifi version: GT-N8010
USA Wifi version (Adds IR blaster, no other known differences): GT-N8013
There's a good chance the SHW-M480W has some differences from the N8010/N8013 - For example, most Korean devices have DMB receivers.
Right now, there is not much released for the wifi variants, as the international 3G version (N8000) was released more than a week earlier than the wifi version - N8013 didn't become available until last Thursday.
Click to expand...
Click to collapse
thx for ur reply
in this case mine has no DMB i cannot find any difference but i don t know how to choose the custom rom now because honestly i bought to flash it can u give me a hand somehow ?
Thx
tatuz said:
thx for ur reply
in this case mine has no DMB i cannot find any difference but i don t know how to choose the custom rom now because honestly i bought to flash it can u give me a hand somehow ?
Thx
Click to expand...
Click to collapse
There is nothing available for N8010/8013 yet... As I said before, the device wasn't released until last Thursday. Things like this take time.
nirajpant7 said:
Even though Samsung hasn't released their stretched out Galaxy Note, they have released the firmware for their SHW-M480K/SHW-M480S through the Samsung Open Source Website. Both files are 175 MB in size, and are the South Korean versions of the firmware. I am looking forward to the development this tablet is going to get
Link to Download
Click to expand...
Click to collapse
I have a SHW-M480W and I just downloaded the zip file of the JB update through your link.
Do you know how to install it?
Is it even possible as I read many tutorials involving Odin with code/modem/csc/.pit but they doesn't seem to apply here... (the zip contains Kernel.tar.gz and Platform.tar.gz files)
olivier1510 said:
I have a SHW-M480W and I just downloaded the zip file of the JB update through your link.
Do you know how to install it?
Is it even possible as I read many tutorials involving Odin with code/modem/csc/.pit but they doesn't seem to apply here... (the zip contains Kernel.tar.gz and Platform.tar.gz files)
Click to expand...
Click to collapse
You are completely missing the point of those files. They are source code, not install images.
Sent from my GT-N8000 using Tapatalk HD
I'm trying to update my SM-P605 Galaxy Note 10.1 2014 LTE to P605XXUBMJ9 and I am so confused by the manual process. I can't do OTA because I rooted and when I go to a ROM download site there are all these regions and carriers mentioned. I'm worried about bricking my device or carrier locking it to a company thousands of miles away. Can you help? Sorry for being so dumb but I've never bought a device outside of a store where they set everything up for you.
Current specs:
Android 4.3
P605XXUBMJ4 Baseband
3.4.0-1927787 [email protected] #1 Kernel
JSS15J.P605ZSUBMJ6 Build number
Enforcing SEPF_SM-P605_4.3_0002 SELinux status
I'm currently in the USA, using T-Mobile, and I was told by Amazon that the device is unlocked.
thatblokematti said:
I'm trying to update my SM-P605 Galaxy Note 10.1 2014 LTE to P605XXUBMJ9 and I am so confused by the manual process. I can't do OTA because I rooted and when I go to a ROM download site there are all these regions and carriers mentioned. I'm worried about bricking my device or carrier locking it to a company thousands of miles away. Can you help? Sorry for being so dumb but I've never bought a device outside of a store where they set everything up for you.
Current specs:
Android 4.3
P605XXUBMJ4 Baseband
3.4.0-1927787 [email protected] #1 Kernel
JSS15J.P605ZSUBMJ6 Build number
Enforcing SEPF_SM-P605_4.3_0002 SELinux status
I'm currently in the USA, using T-Mobile, and I was told by Amazon that the device is unlocked.
Click to expand...
Click to collapse
Being that its a ZS build it looks like its from China.
I would only flash P605ZS***** Builds if you are worried about locking it by mistake.
FYI: The first two digits after the model number are the region
http://www.cpkb.org/wiki/Samsung_firmware_naming_conventions#2._Region_code
scrosler said:
Being that its a ZS build it looks like its from China.
I would only flash P605ZS***** Builds if you are worried about locking it by mistake.
FYI: The first two digits after the model number are the region
http://www.cpkb.org/wiki/Samsung_firmware_naming_conventions#2._Region_code
Click to expand...
Click to collapse
Thank you a million times. I feel like such an idiot :S Do you know if there's an upgrade to MJ9 yet in the China region? Do I need to take any extra precautions to ensure it stays carrier unlocked and usable in the United States.
thatblokematti said:
Thank you a million times. I feel like such an idiot :S Do you know if there's an upgrade to MJ9 yet in the China region? Do I need to take any extra precautions to ensure it stays carrier unlocked and usable in the United States.
Click to expand...
Click to collapse
My understanding is the partition that holds the carrier info / locking info is not touched during a flash with Odin. HOWEVER, I never got into that unlocked device thing because I never had a need to.
Someone else may be better suited to the question than I but as long as you flash ZS based firmwares you should be fine as I did not see a carrier listed for that tablet in China so they may all be unlocked.
Actually, I only think the Verizon one is going to be the locked one but I dont know.
scrosler said:
My understanding is the partition that holds the carrier info / locking info is not touched during a flash with Odin. HOWEVER, I never got into that unlocked device thing because I never had a need to.
Someone else may be better suited to the question than I but as long as you flash ZS based firmwares you should be fine as I did not see a carrier listed for that tablet in China so they may all be unlocked.
Actually, I only think the Verizon one is going to be the locked one but I dont know.
Click to expand...
Click to collapse
You are very helpful in my quest to not ruin an expensive tablet. Do you know if there's an upgrade compatible with ZS for the MJ9 update? I honestly don't mind waiting if there's a chance I'll turn it into a paper weight. Not even a Kit Kat build just some bug fixes from what I understand.
Again, thanks for your help.
I just don't understand all the carrier builds of MJ9. Bloody heck some of em even have custom names which would be a good sign it's specific to region/carrier. So confused by this all
So maybe unroot your device and then you will have an Ota Update... Because if you'll use Odin for flash other firmware you won't be rooted yet, i think.
chabasse said:
So maybe unroot your device and then you will have an Ota Update... Because if you'll use Odin for flash other firmware you won't be rooted yet, i think.
Click to expand...
Click to collapse
Aren't OTA updates issued by providers? T-Mobile doesn't support this device so there's not going to be an MJ9 update. Ever. It's using an LTE frequency not even found in the States. I just bought it online because I didn't want to wait for somebody here to give me support. I'm simply trying to do a manual update without my device being a paperweight or waking up to expect a connection from cellular towers in Asia.
Hi, I have recently bought a Galaxy Note 10.1 thinking it was a European / International version (GT N8010) only to discover it is the USA version gt n8013). Are there any significant differences and can it be re-rooted / booted to a European / International version ?
Thanks
David
dav.a said:
Hi, I have recently bought a Galaxy Note 10.1 thinking it was a European / International version (GT N8010) only to discover it is the USA version gt n8013). Are there any significant differences and can it be re-rooted / booted to a European / International version ?
Thanks
David
Click to expand...
Click to collapse
This thread is just a couple spaces below yours. It will answer your questions. http://forum.xda-developers.com/showthread.php?t=2770009
[Guide][ROM][UPDATE]Running N8010XXUDNE4 on GT-N8013
Sorry to say it but that thread does not answer the question: exactly in what they are different? I know they are for I myself ended up with a hybrid part N8010 and part N8013 after following the instructions on said thread
mannyvzla said:
Sorry to say it but that thread does not answer the question: exactly in what they are different? I know they are for I myself ended up with a hybrid part N8010 and part N8013 after following the instructions on said thread
Click to expand...
Click to collapse
only Differences is Software.. Due to laws in the us being Different in different regions of the world They use model numbers to Determine which region the device is for. The link posted above Shows they can Run the SAME Software so should tell THEY ARE The same Hardware wise.
With the above said. It seems the 8013 us version has a newer boot loader...
Hey guys,
So i have the canadian version of the mini, with the details as follows:
model number: ZTE B2017G
android version: 6.0.1
build number: ZTE B2017G+BELLV1.0.0B06
and I cant update it, ive downloaded the nougat update file from here: https://forum.xda-developers.com/showpost.php?p=73257562&postcount=13
and attempted to update it in system setting from sd card, but got the message: package mismatch installation aborted.
Update didnt work from recovery either. Any ideas on how to update it, or if its even possible? Thanks!!
talha746 said:
Hey guys,
So i have the canadian version of the mini, with the details as follows:
model number: ZTE B2017G
android version: 6.0.1
build number: ZTE B2017G+BELLV1.0.0B06
and I cant update it, ive downloaded the nougat update file from here: https://forum.xda-developers.com/showpost.php?p=73257562&postcount=13
and attempted to update it in system setting from sd card, but got the message: package mismatch installation aborted.
Update didnt work from recovery either. Any ideas on how to update it, or if its even possible? Thanks!!
Click to expand...
Click to collapse
Doesn't seem like it's updatable at this point in time.
Reached out to ZTE: No updates available. If there were to be it would be through bell/Virgin as it's specific build/firmware/model.
Reached out to Virgin, bell and PC mobile as well. If something interesting comes from it I will surely post.
parawizard said:
Doesn't seem like it's updatable at this point in time.
Reached out to ZTE: No updates available. If there were to be it would be through bell/Virgin as it's specific build/firmware/model.
Reached out to Virgin, bell and PC mobile as well. If something interesting comes from it I will surely post.
Click to expand...
Click to collapse
Cool, thanks man.
Btw, is the Bell/Virgin model rootable? So we can put custom rom on it? Would it be the same roms other models would use?
I know tdm is working on one atm (https://forum.xda-developers.com/axon-7-mini/development/recovery-twrp-7-1-unofficial-t3685339)
talha746 said:
Cool, thanks man.
Btw, is the Bell/Virgin model rootable? So we can put custom rom on it? Would it be the same roms other models would use?
I know tdm is working on one atm (https://forum.xda-developers.com/axon-7-mini/development/recovery-twrp-7-1-unofficial-t3685339)
Click to expand...
Click to collapse
I think it should be but I haven't tried yet as I am using this phone as my daily. Maybe if I grab another one.
I need help too with the canadian version. There is no option to activate the NFC...
lanautechdroid said:
I need help too with the canadian version. There is no option to activate the NFC...
Click to expand...
Click to collapse
I don't think this version has NFC. There is no mention of it anywhere.
https://www.ztedevices.ca/axon-cat/axon7mini.html
USA version does mention it.
https://www.zteusa.com/axon7mini/
I got the Axon 7 mini from PC Mobile as well. Looks like the Canadian mini is a variant P852A15H, without NFC.
Any idea how to get rid of the carrier name at the top right? SytemUI tuner doesn't seem to activate either.
The mini is really sleek and light! Haven't had the battery issues mentioned in reviews either. Wish we could update to N though.
For what it's worth, there may be some activity behind the scenes for a minor update to the Canadian Axon 7 Mini late this month.
If this individual is to be believed, it will be bug fixes and security patches ONLY. That is, it will NOT be an upgrade to Nougat; we'll still be stuck on Marshmallow. But at least we'd end up with a security patch newer than late-2016.
https://community.zteusa.com/discussion/comment/228993/#Comment_228993
I wonder if this method will work for Canadian version:
https://forum.xda-developers.com/axon-7-mini/how-to/updating-uk-version-zte-axon-7-mini-to-t3717933
fy0u1 said:
I wonder if this method will work for Canadian version:
https://forum.xda-developers.com/axon-7-mini/how-to/updating-uk-version-zte-axon-7-mini-to-t3717933
Click to expand...
Click to collapse
It's said somewhere in the ZTE section that someone tried it and bricked his phone.
zigonneux said:
if you read more posts, it's said somewhere that someone tried it and bricked his phone.
Click to expand...
Click to collapse
That was after I posted here
So, are there any news on rooting+custom ROM for this device?
Security patch today
Hi,
Just got ZTE B2017G_BELLV1.0.0B08 this morning ....
yergy said:
Hi,
Just got ZTE B2017G_BELLV1.0.0B08 this morning ....
Click to expand...
Click to collapse
Did it upgrade to Nougat? What version of Android is it on after the B08 update.
Bettaxis said:
Did it upgrade to Nougat? What version of Android is it on after the B08 update.
Click to expand...
Click to collapse
No nougat, still M, only security patch february 2018. Better than nothing
yergy said:
No nougat, still M, only security patch february 2018. Better than nothing
Click to expand...
Click to collapse
Confirmed. 105.67 MB download, the device stays on Marshmallow. It brings the device from the November 1, 2016 security patch to February 5, 2018.
This is the first OTA ever released for the Canadian variant. It would include fixes for some pretty high-profile vulnerabilities, such as Blueborne, Krack, and Spectre, so it's definitely welcome.
talha746 said:
I have the canadian version of the mini
Click to expand...
Click to collapse
Bettaxis said:
I got the Axon 7 mini from PC Mobile as well. Looks like the Canadian mini is a variant P852A15H, without NFC.
Click to expand...
Click to collapse
Can you please execute the following adb command and post your product name here?
Code:
adb devices -l
List of devices attached
... device product:P852A11 model:ZTE_B2017G device:tulip transport_id:1
The adb devices -l command lists the following properties: ro.product.name, ro.product.model and ro.product.device
Hint: I downloaded the latest ADB tool from https://developer.android.com/studio/releases/platform-tools.html#download
I just finished a live chat with a ZTE rep. I give him all informations he asked and he told me that he's submitting that info to R&D and they will get back to me within 5 - 6 business days with a package update.
My build number is ZTE B2017G_BELLV1.0.0B08
I don't keep my hope very high on this, but hey you never know ...
I'll post what comes out of this ...
yergy said:
I just finished a live chat with a ZTE rep. I give him all informations he asked and he told me that he's submitting that info to R&D and they will get back to me within 5 - 6 business days with a package update.
my build number is ZTE B2017G_BELLV1.0.0B08
I don't keep my hope very high on this, but hey you never know ...
.
Click to expand...
Click to collapse
good luck with that
The Canada-specific version of the Axon 7 Mini was not sold on the open market, but rather was sold as a bundle through one of Bell Canada's affiliates. (I am aware of it being sold through Virgin Mobile and PC Mobile.) As such, it is running a customized OS that was approved by Bell Canada. The Bell Canada-specific OS has always been visually distinct from the version of the OS that shipped on open-market versions of the Axon 7 Mini; in my opinion it appears quite a bit more similar to the vanilla Android experience, with the exception of the preinstalled Bell account management apps.
Unfortunately, because the phone was bundled through Bell Canada, that means that ZTE will also be obliged to get Bell Canada's approval of any OS updates that may be offered for the phone. We've already seen, with the patch that was released earlier this year, that the OS update path being approved by Bell Canada is following a very different track from what ZTE has been offering on the open market, and I don't expect to see that change any time soon.
And it really doen't matter if ZTE's engineering department is technically capable of offering Nougat or newer for this device. They'd still have to get it cleared by Bell Canada first before they could distribute it.
I have the SM-J320A, AT&T version, and now being used outside the USA. Specs on GSMArena indicate that this phone is one of the versions of the J3 2016 family: J320FN (Europe); J320F (EMEA); J320F/DD (India); J320A (AT&T); J320P (Sprint, Virgin Mobile, Boost); Galaxy Amp Prime (Cricket); Galaxy J3 V (Verizon); J320M (LATAM); J320G (Asia).
1. So does this mean all these versions are identical in Hardware?
If there is no other option, I will install the AT&T newest version, however I would prefer to see if it's possible to use a non-AT&T FW so I can get monthly updates. So...
2. Can anyone tell me if it's possible to put a NON-AT&T 'open' version stock FW on the SM-J320A... and I would then be able to receive the security updates direct from Samsung...
Hope what I am asking is clear.
Robert
The j320 model has three different soc. The j320a is exynos based. The different exynos models are J320a, j320ag, j320az & j320w8.
But with this device only the carriers supply updates, unfortunately.
Not sure if it's an option, but I activated an att sim for their prepaid service (25¢ per minute or something)... Will never use the $10 I spent for the service, but I can update ota now.
Other than that keep your eyes here, we try to keep the latest firmwares available for download.
DamienMc said:
The j320 model has three different soc. The j320a is exynos based. The different exynos models are J320a, j320ag, j320az & j320w8.
But with this device only the carriers supply updates, unfortunately.
Not sure if it's an option, but I activated an att sim for their prepaid service (25¢ per minute or something)... Will never use the $10 I spent for the service, but I can update ota now.
Other than that keep your eyes here, we try to keep the latest firmwares available for download.
Click to expand...
Click to collapse
That's the best answer I've had on a forum... That makes it clear. So since I cannot really do what I was asking, no problem, I am willing to install the AT&T 7.1.1 version J320AUCU2AQI5. Only issue now is that as said, the phone is in use outside the US currently so cannot get the OTA DL. Is there any way or source to DL the full stock firmware for flash via Odin? Would prefer fully stock version with no rooting, etc.... I have a Macbook Pro for the flashing if it makes any diff.
Robert
Maybe this is what I'm looking for...
https://mega.nz/#!Xl4CiZZA!wXRCOHvyyHkcjq0jke47aTVFAMc6s0vxGG6loM-8zUc
??
Yessir
That's the most current j320a firmware
DamienMc said:
Yessir
That's the most current j320a firmware
Click to expand...
Click to collapse
Ok thanks again...
Is that completely stock and flashes with Odin?
Any other special instructions needed to flash?
Just asking as it seems there is a lot of discussion on the entire thread and I'm not sure which issues are coming with which downloads.
Robert
Any issues where addressed.
Yes 100% stock.
Nothing special just load all four files in odin and flash it
Forgive me if I sound like a real dingba5, but I can't control myself from asking this. I have developed what can only be described as an unexplainable and illogical obsession with altering my Galaxy Express 2 SM-J327A 's factory condition. From what I know, there's no custom recovery, no ROM, no ROOT. NOTHING for this model. But the Sprint, Boost, etc. variants are all living it up in zip flashing heaven.
So using the same logic my man was using here, which was making sense, could I flash J327P firmware onto my device without ruining my day......