Related
Hello. Please forgive me for being a noob, but I'll do my best to be precise.
But, I decided to sign up and create a topic here because I need some specific help and/or clarification.
(Sorry if I am perhaps not in the correct place but my brain is numb from hours of reading all areas here)
The story:
Purchased used Samsung Galaxy Note 3 in Canada originally on WIND Mobile. Unlocked phone for use on TELUS.
After a month, the phone ended up getting blocked IMEI due to it being reported lost/stolen.
Purchased "IMEI repair" service with free SIM unlock and sent phone away to "Joe The Android Rooter" (androidrooter.com) based on other's similar experiences and praise.
Received phone back, IMEI good, phone in good working order.
The problem:
The Note 3 with manual APN settings via a phone call with Telus only has Network Mode options WCDMA/GSM (Auto), WCDMA or GSM only. Phone gets 3G signal. Slow data speeds are fine, but my text messaging and phone calls rarely work where I live, which is a rural area. Dropped calls, lost texts, or no service. My Samsung Galaxy S3 does LTE and never has an issue. I would prefer to have faster data and reliable network/modem mode.
Called Telus again, and was directed to this thread here: http://forum.xda-developers.com/showthread.php?t=2489766
Have been reading around here wherever I could find information, and I'm not totally confident or clear about doing that.
It is all a little confusing to me so I need some straight forward help. I would be forever in debt.
The questions:
According to that thread, I would have to follow all those steps to enable LTE on my phone. What do I need to ensure that nothing has been modified with the IMEI repair so I don't run into any problems?
I tried the step of using the dialer for *#272*[IMEI]# and it brought me the options, and the Telus one (TLS) is listed. Can I just make that change, and voila? Or do I have perform root, etc? I'm just trying to make this easy and from what I read, I shouldn't even have been able to bring up that option through the dialer in the first place?
This thread here: http://forum.xda-developers.com/showthread.php?t=2618684 made me second guess everything.
The phone information:
AP: N900W8VLUCNB7
CP: N900W8VLUBMJ4
CSC: N900W8OYACNB7
Model Number:
SM-N900W8
Android Version:
4.4.2
Baseband Version:
N900W8VLUBMJ4
Kernel Version:
3.4.0-859721
[email protected] #1
Thu Feb 27 17:06:41 KST 2014
Build Number:
KOT49H.N900W8VLUCNB7
SE for Android Status:
Enforcing
SEPF_SM-N900W8_4.4.2_0017
Tue Jun 24 18:55:11 2014
Security Software Version:
MDF v1.0 Release 2
Shows as Official.
I hope I have provided all the info and posted in the right spot and I am very grateful for whatever help and clarification I could get.
Sorry for the length, but thanks for taking the time to read it.
-Adam, Canada.
You just have to do the 272 code to switch to Telus... You should have lte after that. But beware, this will completely reset your device... You will have to reconfigure it from scratch.
You might as well upgrade it to the latest firmware... Your baseband should be nb7 also... Or ni1 if you use the latest videotron firmware to manually upgrade. To your will still have to change the csc (272 code) to get the correct config from r Telus
Envoyé de mon SM-N900W8 en utilisant Tapatalk
Resetting isnt an issue or anything. My main concern is doing the code/csc change, still being able to do OTA updates, or at least over Kies. I'm happy enough sticking with OTA and TouchWiz and not toying around with the phone otherwise.
I've rooted (and loved) all my devices in the past (HTC, Motorola, LG) but had such a problem with my Galaxy SIII and when I tried to root it, not only was it the most difficult, but it turned it into a nice paperweight.
I got a good deal on this phone and like the size is all.
Mr3ff said:
Resetting isnt an issue or anything. My main concern is doing the code/csc change, still being able to do OTA updates, or at least over Kies. I'm happy enough sticking with OTA and TouchWiz and not toying around with the phone otherwise.
I've rooted (and loved) all my devices in the past (HTC, Motorola, LG) but had such a problem with my Galaxy SIII and when I tried to root it, not only was it the most difficult, but it turned it into a nice paperweight.
I got a good deal on this phone and like the size is all.
Click to expand...
Click to collapse
If you change the csc with the 272 code, you shouldn't have any trouble doing ota updates. All stock Canadian roms are exactly the same... You can download and install a bell rom on a Rogers device and retain your Rogers apps/config. Only the csc is changing... And this csc is there to reconfigure your device for the specific provider.
Worst thing worst, you will have to manually download and install the latest stock rom with Odin... And after that, you will be fine. But I really doubt that you will have to do this.
Well thank you!
I backed up the phone with Kies just to save my settings and simple stuff so I wouldn't have to do it again manually, but I don't mind doing it again if I have to.
Used the code to change the CSC, rebooted, LTE is working fine. Texts+calls all function like they used to without dropping my signal and stuff.
Just using Kies to restore little stuff and I'm good.
I checked to see if I have root, which I don't. What I wonder is why everything I read told me I shouldn't have been able to simply dial that code and change the CSC without rooting? I have seen a number of people having similar issues, but if it really was this simple without root, why is it not clear that you simply just need to do this? Heck, even Telus told me to root the phone. I didn't expect that.
Mr3ff said:
Well thank you!
I backed up the phone with Kies just to save my settings and simple stuff so I wouldn't have to do it again manually, but I don't mind doing it again if I have to.
Used the code to change the CSC, rebooted, LTE is working fine. Texts+calls all function like they used to without dropping my signal and stuff.
Just using Kies to restore little stuff and I'm good.
I checked to see if I have root, which I don't. What I wonder is why everything I read told me I shouldn't have been able to simply dial that code and change the CSC without rooting? I have seen a number of people having similar issues, but if it really was this simple without root, why is it not clear that you simply just need to do this? Heck, even Telus told me to root the phone. I didn't expect that.
Click to expand...
Click to collapse
You never have to root a phone to change the csc when the target csc is already included on your rom... Which is the case for the Canadian version of the note 3... It contains all csc for all Canadian providers (at least those that are selling it). And I think it's the same for all recent Samsung devices...
I believe You need root to change csc when the csc you want to use is not in your rom and you want to flash an other rom that includes the new csc.
tprevir had
How come then, such as on that thread here that initially sparked my willingness to do all this, was it not simply mentioned in there that one could just use the code and make the change, without having to deal with all the rooting/etc?
Of course rooting has many benefits, but some may just simply need the carrier/radio switch to enable LTE and nothing more - such as myself. (I'm okay with stock because of the S-Pen, but I am certainly considering rooting the device down the road, once it becomes "stale" to me)
As stated in http://forum.xda-developers.com/showthread.php?t=2489766 "Have a Samsung Galaxy Note 3 (model: SM-N900W8) and wish to enable LTE for a specific carrier? Follow these in-depth instructions and you will enable LTE for this specific model." which was the most comprehensive thing I could find via Google, but it really did make me wonder if it was all truly needed, to which it was not.
probably no one know at that time that all Canadian Note 3 were using the exact same rom...
that being said, not all SM-N900W8 are the same... this model is also used in other contries... so if one had bought it somewhere else, he would need to do more things to finally get LTE and/or the correct carrier apps.
The thread is from April... and at that time, I just had my device for a few days... and I did not know that we could only change the CSC to switch the configuration for an other provider. I learned a lot by reading on this subject here and there.
Envoyé de mon SM-P900 en utilisant Tapatalk
Maybe i'm wrong but i noticed you have NB7 Rom but MJ4 baseband and your problem is probably here. I bought a used note 3 and it was in the same condition. i wasn't getting LTE. If you try to upgrade your phone via ODIN, you have to go to download mode by powering off the phone first . If you go to download mode by any other way the modem partition is protected and will be not updated. I've reflashed the entire Rom and now i have NB7 baseband and NB7 Rom and i'm getting LTE with fido. Hope this helps!
Tornade69 said:
Maybe i'm wrong but i noticed you have NB7 Rom but MJ4 baseband and your problem is probably here. I bought a used note 3 and it was in the same condition. i wasn't getting LTE. If you try to upgrade your phone via ODIN, you have to go to download mode by powering off the phone first . If you go to download mode by any other way the modem partition is protected and will be not updated. I've reflashed the entire Rom and now i have NB7 baseband and NB7 Rom and i'm getting LTE with fido. Hope this helps!
Click to expand...
Click to collapse
That's what I was concerned about at the beginning (NB7 & MJ4) but my solution was to quickly backup what few things I wanted to keep from my phone (a few pictures, contacts, settings) and then do the *#272 code and select Telus. Once it rebooted, everything worked good as new. In fact, my up/down speeds are through the roof compared to the SGS3 that I had previously and for whatever reason the quality of sound in phone calls are dramatically increased. Like AM radio to FM.
Either way, doing that code, nothing else had to be done on my phone - no rooting, no tinkering and no hassle - other than entering the code and selecting Telus.
I would have posted this under the S5 'T-Mobile' section, but I think it might be more of a generic discussion.
I am considering in purchasing the S5 Plus (G901F). From what I can see right now, this is only available in Germany, UK and just about now, Netherlands. Problem is that it's exclusive to respective providers and therefore - "branded"
I can find it cheaper from Germany - which is subject to T-Mobile / Telekom (same thing?) branding.
I have asked the shop and they confirmed that the phone is factory unlocked to any provider/country and that there is no "hardware branding" on the phone. Meaning no stickers, no logos or anything else physically on the phone.
However, there is "software branding". Meaning the firmware itself and whatever bloatware the provider has put inside that ROM.
Now, I have read that I can use ODIN and find the least crapware-loaded ROM (from any country) and flash it *without* compromissing the knox bit. So far so good.
What I would like to know is that: What happens when finally Samsung releases a pure, non-branded ROM for the G901F? I can still use ODIN to flash - no problem. But what about future releases. I mean future non-branded firmwares. Would I be able to use OTA from that point on, or would I have to keep an eye and update via ODIN? Can someone please elaborate and explain this?
I get it - that's a 'newbie' type of question, but I would be really grateful towards some help here. All I can do for someone who will spend 2mins for writing a useful/accurate answer is say 'thanks'
Didn't find an exact answer to what I ask here, hence me writing this. Hope it's not a double-post!
jstoner said:
I would have posted this under the S5 'T-Mobile' section, but I think it might be more of a generic discussion.
I am considering in purchasing the S5 Plus (G901F). From what I can see right now, this is only available in Germany, UK and just about now, Netherlands. Problem is that it's exclusive to respective providers and therefore - "branded"
I can find it cheaper from Germany - which is subject to T-Mobile / Telekom (same thing?) branding.
I have asked the shop and they confirmed that the phone is factory unlocked to any provider/country and that there is no "hardware branding" on the phone. Meaning no stickers, no logos or anything else physically on the phone.
However, there is "software branding". Meaning the firmware itself and whatever bloatware the provider has put inside that ROM.
Now, I have read that I can use ODIN and find the least crapware-loaded ROM (from any country) and flash it *without* compromissing the knox bit. So far so good.
What I would like to know is that: What happens when finally Samsung releases a pure, non-branded ROM for the G901F? I can still use ODIN to flash - no problem. But what about future releases. I mean future non-branded firmwares. Would I be able to use OTA from that point on, or would I have to keep an eye and update via ODIN? Can someone please elaborate and explain this?
Click to expand...
Click to collapse
Hi jstoner,
I think that while using an unbranded ROM would probably prevent you from receiving OTA's from your provider you would still be left wih the Samsung tool for getting new updates - Kies.
It has the options to check for updates and to flash them.
The geeky option is indeed to keep your eyes out for updates and fire up Odin
Disclaimer: I never used Kies to update my phone so I might be wrong here
Sent from my Android powered Tricorder
I forgot to mention - I live in Greece (but I m thinking of buying the phone from Germany, as it's not available here yet)
Does KIES list all ROMs from ALL regions/providers for a particular phone?
vrl13 said:
I think that while using an unbranded ROM would probably prevent you from receiving OTA's from your provider you would still be left wih the Samsung tool for getting new updates - Kies.
r
Click to expand...
Click to collapse
Hello,
It seems there is a firmware for Greece for you
http://www.sammobile.com/firmwares/download/40735/G901FXXU1ANK3_G901FEUR1ANL1_EUR.zip/
Oh good
Does that mean it's about to be released in Greece soon???
thierry_b said:
Hello,
It seems there is a firmware for Greece for you
http://www.sammobile.com/firmwares/download/40735/G901FXXU1ANK3_G901FEUR1ANL1_EUR.zip/
Click to expand...
Click to collapse
Nobody knows man. But you can always flash the newest updates via odin without triggering knox. After a few month only German Vodafone is building an update. T- mobil stii stuck on h5 firmware. So if there will be an unbranded oce ever ever ever.........you have odin
Wonder if that Greek ROM is unbranded or not
As for hardware branding, it seems that all G901F units sold in Germany under Telekom/T-Mobile have that "LTE+" at the back (also on the retail box). Instead, those EE (UK) units seem to have no hardware branding at all - it just has the "Samsung" logo at the back cover (and nothing on the retail box)
teichy1 said:
No Body knows man. But you can always flash the newest updates via odin without triggering knox. After a few month only German Vodafone is building an update. T- mobil stii stuck on h5 firmware. So if there will be an unbranded oce ever ever ever.........you have odin
Click to expand...
Click to collapse
There are a few Providerapps inside. All Roms i tested for 901F has the normal Samsung Bootloaderscreener. No Provider startup. So nothing to worry about . Mine has also the LTE+ logo, but former T-Mobile Devices have also Coverbrands on it...Thanks God these not
Hi community I got my SGs4 from China and it is i9505 but came with i337 bootloader and Baseband,TW 4.3MK2
I got this from the phoen info app:
GENERAL INFO
Phone model:GT-i9505
Device type:jflteatt
Product Name:jflteuc
FIRMWARE INFO
Bootloader version: I337UCUEMK2
Baseban version: I337UCUEMK2
PDA version: I9505ZHUEMK2/i337UCUEMJ6
CSC version: i9500ZSUEMJ6
OS INFO
Build number: JSS15J.I9505ZHUEMK2(I337UCUEMJ6)
I want to know what firmware can I flash( because I want to update to 4.4.2 but dont know the right firmware),is my bootloader locked,can TWRP be install or do i need SS? and anything you can add will be appreciated
Well I think this info is important if you need more just ask me,if you need my build.prop I´ll upload ,looks like a hybrid firmware between I9505&i337
This seems like a definite Frankenstein. AT&T bootloader and device type, I9505 PDA and phone model, and I9500 CSC.
Your first task will be to download the AT&T firmware and install it. Then you need to borrow a friend's AT&T SIM and test to see if you're getting LTE. If you get LTE, then you have an AT&T phone, regardless of what anything else says. Unfortunately, that will mean you have to use Safestrap.
How much did you spend on the phone?
Strephon Alkhalikoi said:
This seems like a definite Frankenstein. AT&T bootloader and device type, I9505 PDA and phone model, and I9500 CSC.
Your first task will be to download the AT&T firmware and install it. Then you need to borrow a friend's AT&T SIM and test to see if you're getting LTE. If you get LTE, then you have an AT&T phone, regardless of what anything else says. Unfortunately, that will mean you have to use Safestrap.
How much did you spend on the phone?
Click to expand...
Click to collapse
Right Now I'm on mexico with Telcel, my friends are on USA T-mobile,Verizon, Try to use Telcel LTE data and it connect to 4G, LTE logo dont appears.
I went to sammobile and download the 4.4.2 from hong kong, I'll flash trough odin to see what happens
I Got it on ebay for 255 dlls when it arrive home the phone was sealed
The fact it was sealed doesn't mean much. You're the second or third person I've seen on the forum asking about this, and in the case of the first user he was able to get his device working perfectly using the AT&T firmware. Regardless, the fact you weren't able to pick up LTE is a clue. It leads me to believe that in this case the phone may be correct but the firmware wrong. Here's why.
If you had an AT&T phone, as I suspected, your phone should have picked up LTE if it was unlocked for use on any carrier, as both Telcel and Nextel use band 4, while Movistar supposedly uses band 2, bands which an AT&T phone supports (bands 1, 2, 4, 5, 7, and 17). Check Telcel's coverage map to be certain you have LTE coverage in your area.
Neither an I9500 nor an I9505 would pick up those LTE bands. The I9500 doesn't have LTE at all, and the I9505 has LTE bands 1, 3, 5, 7, 8, and 20. Neither phone will get LTE in North America (including Mexico). The best those phones will do is HSPA+, which on the AT&T firmware would be labeled as 4G.
Try the firmware you downloaded, but I suspect you're going to want to return the phone if you want LTE service.
this phone.....
Strephon Alkhalikoi said:
Neither an I9500 nor an I9505 would pick up those LTE bands. The I9500 doesn't have LTE at all, and the I9505 has LTE bands 1, 3, 5, 7, 8, and 20. Neither phone will get LTE in North America (including Mexico). The best those phones will do is HSPA+, which on the AT&T firmware would be labeled as 4G.
Click to expand...
Click to collapse
This is the scenario with my *chinese* version of the i9505.
I downloaded CPU-Z and it shows hardware: i9505, however, kernel build is a AT&T one.
I am REALLY SKEPTICAL to flash CM11 on it because I am very afraid to brick this phone. paid 300$ for it.
The funny thing is, I have the EXACT same phone as OP.
Anything I could try? please note AT&T doesn't work in Canada, nor I can borrow someone's AT&T sim card.
HOWEVER, I do have experience with a previous confirmed i337, and with bell it picked up LTE waves.
However this one doesn't.
Probably safe to flash?
I think my pat response to anyone purchasing these phones from now on will be to return them and purchase one through a Samsung-authorized retailer if Swappa isn't an option. For example, as of the time and date I write this, on Swappa there are currently 32 of the AT&T Galaxy S4 available, with prices ranging from $184 to $500US. The T-Mobile version, which doesn't have the locked bootloader of the AT&T model, has 8 devices available with prices ranging from $255-$310US. That doesn't include the Active variants or the MVNO-branded phones.
Purchasing a cell phone through eBay is, to be blunt, dangerous. You have no guarantee that the phone will be clean for activation, no guarantee that you won't have to do additional work to get the phone working, and no guarantee that the phone is even legitimate. Couple that with the buyers not doing their homework before purchasing and you get a clusterf**k of major proportions.
So, return the phone. If the seller doesn't accept returns, do a chargeback on your credit card. Or else put it up for sale as a parts phone.
Albie_Stark said:
Right Now I'm on mexico with Telcel, my friends are on USA T-mobile,Verizon, Try to use Telcel LTE data and it connect to 4G, LTE logo dont appears.
I went to sammobile and download the 4.4.2 from hong kong, I'll flash trough odin to see what happens
I Got it on ebay for 255 dlls when it arrive home the phone was sealed
Click to expand...
Click to collapse
Albie, can you please let me know when you get home if the phone picks up AT&T LTE waves? I am convinced this is the i9505 due to the baseband and specific board details (which correspond to the i9505 model rather than the i337, but not GPE)
VladimirMan93 said:
Albie, can you please let me know when you get home if the phone picks up AT&T LTE waves? I am convinced this is the i9505 due to the baseband and specific board details (which correspond to the i9505 model rather than the i337, but not GPE)
Click to expand...
Click to collapse
I'm not a AT&T user my apologies, I used to be Cleartalk wireless user(took my verizon SGS4-i545 and flashed with them) but I drop the contract sell my phone to buy this SGS4-i9505, I'll be hard to get a AT&T sim, I download from Sammobile the i9505 4.4.2-NK2 firmware from hongkong and then try to flash through Odin,because 4.3 has a poor battery life in my case,but before I flash it I'm making a Flashable Zip for safestrap to extrac the "build.prop" and see what is in there, because may be this update fix some problems :fingers-crossed:
Albie_Stark said:
Right Now I'm on mexico with Telcel, my friends are on USA T-mobile,Verizon, Try to use Telcel LTE data and it connect to 4G, LTE logo dont appears.
I went to sammobile and download the 4.4.2 from hong kong, I'll flash trough odin to see what happens
I Got it on ebay for 255 dlls when it arrive home the phone was sealed
Click to expand...
Click to collapse
Albie_Stark said:
I'm not a AT&T user my apologies, I used to be Cleartalk wireless user(took my verizon SGS4-i545 and flashed with them) but I drop the contract sell my phone to buy this SGS4-i9505, I'll be hard to get a AT&T sim, I download from Sammobile the i9505 4.4.2-NK2 firmware from hongkong and then try to flash through Odin,because 4.3 has a poor battery life in my case,but before I flash it I'm making a Flashable Zip for safestrap to extrac the "build.prop" and see what is in there, because may be this update fix some problems :fingers-crossed:
Click to expand...
Click to collapse
I did some more snooping around desperately trying to find out more information about this phone and the last thing I remember reading about before going to bed was:
No matter what we try, this phone is with a locked bootloader after the knox 4.3 update.
Unofficial firmware can and will brick this phone resulting either in a soft-brick OR, for the more unlucky ones, even a hard brick.
BUT, I also found other contradictory posts claiming that regardless the presence of the knox update, the bootloader IS infact unlocked.
It's hard to take a side due to the lack of tools to verify if the bootloader is in fact locked.
Could you please do me a HUGE favor?
if yes:
Go to your download mode and if possibly post a snapshot of the screen. I've included mine.
For some stupid reason, even though it's a i9505, it is recognized as AT&Ts SGH-I337.
Since I don't have my camera lying around, I'll write word for word what's on my screen:
ODIN MODE
PRODUCT NAME: SGH-I337
CURRENT BINARY: Samsung Official
System Status: Official
Knox Level Lock: 0x0
Knox Warranty Void: 0x0
CSB-Config-LSB: 0x30
Write Protection Enable
eMMC Brust Mode: Enabled
Click to expand...
Click to collapse
If this flash works for you, please let me know.
If the BL is unlocked in the Firmware you're trying to flash to it, Please let me know.
I want to go out of this nightmare and continue with my work.
and if you could share links in a PM to me or here, that would be simply perfect.
Cheers and thanks for everything
We have the same download mode screen -_- u.u ,I try to flash the NK2 and it fail than t means we have a locked bootloader :'( ,couple of minutes ago I dowload the mk2 & NB2 for i9505 from Hongkong I would flash them at 10 pm pacific time I will keep you updated my last resource will be to flash mk2 for the AT&T variant in my case I can live with that if root is available ooo! just found a threat to get 4.4.2 NB1 but it is for the i337 anyway Let me see what happens with the 2 Downloaded firmwares
Ps:I don't really care about the warranty so if there is a good dev reading this helpme.to install the i9505 official firmware from any country,
Albie_Stark said:
We have the same download mode screen -_- u.u ,I try to flash the NK2 and it fail than t means we have a locked bootloader :'( ,couple of minutes ago I dowload the mk2 & NB2 for i9505 from Hongkong I would flash them at 10 pm pacific time I will keep you updated my last resource will be to flash mk2 for the AT&T variant in my case I can live with that if root is available ooo! just found a threat to get 4.4.2 NB1 but it is for the i337 anyway Let me see what happens with the 2 Downloaded firmwares
Ps:I don't really care about the warranty so if there is a good dev reading this helpme.to install the i9505 official firmware from any country,
Click to expand...
Click to collapse
Anxiously waiting your progress!
It's simple.
You got an SGH-I337.
You probably got a rom installed that is ported from I9505 and they didn't edit the build.prop.
I'd crack open the phone and look for the model number on the motherboard. That would eliminate any and all confusion.
MK2 & NB2 for i9505 HKong version give "secure check Fail:system" cant find answer for that......with the 4.42 firmware it gave me "secure check fail:aboot"
Strephon Alkhalikoi said:
I'd crack open the phone and look for the model number on the motherboard. That would eliminate any and all confusion.
Click to expand...
Click to collapse
man ,following your advice,flashin mk2 for i337 I done with this, Should hear you since the begining now odin is flashing
"Damn you 15's :Joey Tribbiani Quotes"
Hope this help you
@VladimirMan93 Sorry man I fail on my quest our hope is flash mk2 for i337 and if You want to update to 4.4.2 or 4.4.4
follow this threat is very usefull you will find MK2 ,the updates,rooting& safestrap
http://forum.xda-developers.com/galaxy-s4-att/general/guide-odin-to-stock-updating-rooting-t2926642 :good:
Do not do anything stupid my friend!!
Albie_Stark said:
@VladimirMan93 Sorry man I fail on my quest our hope is flash mk2 for i337 and if You want to update to 4.4.2 or 4.4.4
follow this threat is very usefull you will find MK2 ,the updates,rooting& safestrap
http://forum.xda-developers.com/galaxy-s4-att/general/guide-odin-to-stock-updating-rooting-t2926642 :good:
Click to expand...
Click to collapse
ALBIE!
DO NOT DO ANYTHING STUPID!!!
I just rooted my phone with success man!
Here is the link. literally took me 5 minutes. just be sure to:
1) no a-v on the phone!!! <- Very important!!!
2) use high quality USB cable
3) be patient.
4) have a VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY big nerdgasm like I did when my 4.3 pos was rooted!
Code:
http://forum.xda-developers.com/showthread.php?t=2565758
here is the link my friend enjoy your rooted HongKong version of the i9505
PS: Are you willing to experiment a little more with it? Let me know I have something in mind.
VladimirMan93 said:
ALBIE!
DO NOT DO ANYTHING STUPID!!!
I just rooted my phone with success man!
Here is the link. literally took me 5 minutes. just be sure to:
1) no a-v on the phone!!! <- Very important!!!
2) use high quality USB cable
3) be patient.
4) have a VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY big nerdgasm like I did when my 4.3 pos was rooted!
Code:
http://forum.xda-developers.com/showthread.php?t=2565758
here is the link my friend enjoy your rooted HongKong version of the i9505
PS: Are you willing to experiment a little more with it? Let me know I have something in mind.
Click to expand...
Click to collapse
Thanks man ,but I follow that threat the first day my phone arrive with success, install "Samsung phone info" to look deeper,that was the moment when I realize that my phone was a mess. tried to install the custom recovery,when I went to download mode I saw the screen you posted before, try to flash official firmware from samsun gi9505 -odin giveme the "aboot fail" wich means lock bootloader so I start this threat. the rest is history.... this afternoon I check the hardware and surprise!!! "I337" was all over the phone except for the sticker in the battery slot......
Flash 4.3MK2 for i33 via Odin,it intalled super fast with no problems then follow the threat I recommend you to take the update to 4.4.4NJ4 root,intall safestrap I´m so happy with my new improve battery life and maybe tomorrow I flash wanamlite,If I was able to flash it before on mi SGS4 from verizon I guess I can flash on my new phone wich has the same hardware that i9505,becsuse I read this on te forum:
"I337,i9505 & M919 have the same hardware except for the bootloader. any way I keep looking and experiment until I can install i9505 firmware through Odin
Albie_Stark said:
Thanks man ,but I follow that threat the first day my phone arrive with success, install "Samsung phone info" to look deeper,that was the moment when I realize that my phone was a mess. tried to install the custom recovery,when I went to download mode I saw the screen you posted before, try to flash official firmware from samsun gi9505 -odin giveme the "aboot fail" wich means lock bootloader so I start this threat. the rest is history.... this afternoon I check the hardware and surprise!!! "I337" was all over the phone except for the sticker in the battery slot......
Flash 4.3MK2 for i33 via Odin,it intalled super fast with no problems then follow the threat I recommend you to take the update to 4.4.4NJ4 root,intall safestrap I´m so happy with my new improve battery life and maybe tomorrow I flash wanamlite,If I was able to flash it before on mi SGS4 from verizon I guess I can flash on my new phone wich has the same hardware that i9505,becsuse I read this on te forum:
"I337,i9505 & M919 have the same hardware except for the bootloader. any way I keep looking and experiment until I can install i9505 firmware through Odin
Click to expand...
Click to collapse
The only reason I buy the S4 is because Cyanogen mod 12. I am so excited to figure out how to put it on this phone. And they have compatible ROM!!! :C
Which is how this is so much more intense.
I WANT IT, I WANT IT! I paid 400$ for my freedom, I want it!! D:
VladimirMan93 said:
The only reason I buy the S4 is because Cyanogen mod 12. I am so excited to figure out how to put it on this phone. And they have compatible ROM!!! :C
Which is how this is so much more intense.
I WANT IT, I WANT IT! I paid 400$ for my freedom, I want it!! D:
Click to expand...
Click to collapse
OMG I paid 255$ !!! I belive Isaw you in other forum asking right??
Hope they find how to unlock the BL or AT&T give us Unlock BL with the Lolipop update
Hey guys,
Quick overview: 2 Questions: How to update to lollipop and benefits of KNOX.
I just got a new Metro PCs Galaxy S5 unlocked and am using it on the AT&T network as the title suggests. I was looking around to try and find an answer but was unsuccessful. My question is how do I update this phone since it's a Metro PCs phone (which is apparently same as T-Mobile) to lollipop and i'm on AT&T? Since I'm on the AT&T network, there is no update for lollipop yet, but from what I've read the phone itself should be compatible and ready for the T-Mobile lollipop update...AT&T is the only carrier that hasn't released lollipop update AFAIK. Here's the current information on the device:
Model: SM-G900T1
Android: 4.4.2
Baseband: G900T1UVU1ANK1
Kernel: 3.4.0-1616453
Build: KOT49H.G900T1UVU1ANK1
If I try to do the OTA Software update from the "About Device" settings screen, it says up to date. Is my only option to root it and do a custom ROM (or wait for AT&T to come out with the lollipop update...which may not be very soon)? Though if i root it I'll trigger the KNOX stuff i've been reading about. I don't think the KNOX stuff has anything useful to me from what I read, because it seems to be for business stuff only, whereas i'd only be using this phone for personal use. Which brings me to my second question: Is there any reason for me to care about keeping KNOX 0x0? Seems like it will void any software warranty if i trigger it and I'd lose any OTA updates? That's the only fall back? Because if it isn't a big issue then I can just root and custom rom my phone (recommendations on ROMs? looking for mostly performance and battery life). Lemme know if you have other questions for me or if i need to provide more info. Thanks for any help!
Im only seeing KitKat ROMs on Sammobile and Samsung Updates, for the SM-G900T1, and they generally have all ROMs available for each device
Looks like a Custom ROM might be your only way if there is no official Lollipop update for you, but Custom ROM = Custom Recovery = KNOX tripped
*Detection* said:
Im only seeing KitKat ROMs on Sammobile and Samsung Updates, for the SM-G900T1, and they generally have all ROMs available for each device
Looks like a Custom ROM might be your only way if there is no official Lollipop update for you, but Custom ROM = Custom Recovery = KNOX tripped
Click to expand...
Click to collapse
Yah, I was really confused by this as well. I checked Sammobile and they didn't even have the T-Mobile version which seems odd to me?
*Detection* said:
Im only seeing KitKat ROMs on Sammobile and Samsung Updates, for the SM-G900T1, and they generally have all ROMs available for each device
Looks like a Custom ROM might be your only way if there is no official Lollipop update for you, but Custom ROM = Custom Recovery = KNOX tripped
Click to expand...
Click to collapse
Can you send me a link to where you see those updates? I couldn't find it myself for my model (SM-G900T1).
Also, would i be able to update my phone with the latest T-Mobile Variant? I was thinking that since (from what i've been reading) it sounds like the T-Mobile phone and the Metro PCS phones are supposedly the exact same phone (T-Mobile = SM-G900T, Metro PCS = SM-G900T1) and my phone is unlocked, that perhaps I can update my phone to the latest Samsung signed T-Mobile update with lollipop and not trip Knox. Any ideas / thoughts on this?
airyip77 said:
Can you send me a link to where you see those updates? I couldn't find it myself for my model (SM-G900T1).
Also, would i be able to update my phone with the latest T-Mobile Variant? I was thinking that since (from what i've been reading) it sounds like the T-Mobile phone and the Metro PCS phones are supposedly the exact same phone (T-Mobile = SM-G900T, Metro PCS = SM-G900T1) and my phone is unlocked, that perhaps I can update my phone to the latest Samsung signed T-Mobile update with lollipop and not trip Knox. Any ideas / thoughts on this?
Click to expand...
Click to collapse
You should be able to flash any ROM for your exact model phone
Links to sammobile are banned on XDA, just go to sammobile dot com - enter your model number into the firmware section
Need a free account to download
KNOX will not be tripped flashing stock ROMs with ODIN
*Detection* said:
You should be able to flash any ROM for your exact model phone
Links to sammobile are banned on XDA, just go to sammobile dot com - enter your model number into the firmware section
Need a free account to download
KNOX will not be tripped flashing stock ROMs with ODIN
Click to expand...
Click to collapse
thx, i was dumb and kept searching with "samsung galaxy" instead of the exact model number so couldn't find it there at first :silly:
I get that i can flash any ROM for my exact model, but was hoping to find out if i can install the SM-G900T (T-Mobile) update on the SM-G900T1 (Metro PCS)? From what I'm reading they appear to be the exact same phone, but i haven't seen any hard evidence of that fact...like i've read in other threads and other sites that people have put t-mobile roms/etc on a metro-pcs galaxy s5, and that essentially they're the exact same phone, but just nothing i've seen/read that makes it definitively so...unless that in and of itself proves their statement that they installed the TM roms on the MPCS phone. I'm cautious cause i keep reading about being careful because of all the different variants and the possibility of bricking. i guess in the meantime i'll look around more then to see if i can install the t-mobile one on my metropcs.
Ive no idea, I wouldn't want to advise flashing a ROM for a different model phone - best wait to hear if anyone else has the same phone and done the same thing
Someone here saying they are exactly the same phone
http://forum.xda-developers.com/tmobile-galaxy-s5/help/smg900t-smg900t1-t2964392
*Detection* said:
Ive no idea, I wouldn't want to advise flashing a ROM for a different model phone - best wait to hear if anyone else has the same phone and done the same thing
Someone here saying they are exactly the same phone
http://forum.xda-developers.com/tmobile-galaxy-s5/help/smg900t-smg900t1-t2964392
Click to expand...
Click to collapse
yah, i've seen that thread and it's what i meant by "i've heard things", but not really "confirmed things" hahaha
I searched a bit more and found this thread, and it looks like might be possible because someone did it on an older firmware from TM -> MPCS
http://forum.xda-developers.com/showthread.php?t=2733529
I may look a little more, but i think i'll try it and see what happens. when/if i do, i'll post back with results.
...although, would that nullify my unlock? Phone is like I said, MPCS and unlocked, running on AT&T. Switching to the T-Mobile firmware shouldn't have any affect on the unlock right?
airyip77 said:
...although, would that nullify my unlock? Phone is like I said, MPCS and unlocked, running on AT&T. Switching to the T-Mobile firmware shouldn't have any affect on the unlock right?
Click to expand...
Click to collapse
No it won't make any changes to your SIM/carrier unlock status. Once you permanently SIM unlock your phone, that is it.
About to get a phone on contract with a major telco in Australia...
In theory, it's fine* to flash to another country/regional ROM that isn't telco_branded, so long as it's an official Samsung ROM, right?
Hoping to flash to an official Sammy ROM for a country/region that usually gets major Android updates far quicker than Australia or Australian telcos.
Thank-you.
*by "fine", I mean it won't trip Knox
Anyone? TY.
jalyst said:
Anyone? TY.
Click to expand...
Click to collapse
If you phone is not carrier branded(N910F or N910C) you are fine with flashing a ROM from Samsung...it won't trip KNOX.
Also, wrong section...
Ashatar said:
If you phone is not carrier branded(N910F or N910C) you are fine with flashing a ROM from Samsung...it won't trip KNOX.
Click to expand...
Click to collapse
Wait, but mine will be telco_branded (buying on contract), are you claiming it's absolutely not possible then?
Even if I'm flashing from an official Sammy ROM to another official Sammy ROM, how so?
jalyst said:
Wait, but mine will be telco_branded (buying on contract), are you claiming it's absolutely not possible then?
Even if I'm flashing from an official Sammy ROM to another official Sammy ROM, how so?
Click to expand...
Click to collapse
I was on Telstra 4.4.4 then flashed to the Australian 5.0 on Sammy and knox tripped. There isn't Telstra 5.0 yet so I used the Australian one. I'm on N915G but the phone is a company phone so I'm not overly stressed on tripping knox. I think flashing a Telstra 5.0 on Sammy when available or OTA update you might be OK. Anyway went back to 4.4.4 I was missing Xposed to much among other things. Xposed for lollipop didn't play nice for me.
Sent from one of my Notes.
Damn it. Someone told me that; so long as you're flashing to an official Sammy ROM, it shouldn't trip.
What if I flashed to country/region other than Australia, & what if I went for a 4.x ROM instead of 5.x?
I don't care about root, xposed, & all that just yet, happy to be on a 4.x ROM...
Want to be on a stock one though not branded, & ideally one for a region/country that gets updates sooner & more regularly/reliably.
jalyst said:
Damn it. Someone told me that; so long as you're flashing to an official Sammy ROM, it shouldn't trip.
What if I flashed to country/region other than Australia, & what if I went for a 4.x ROM instead of 5.x?
I don't care about root, xposed, & all that just yet, happy to be on a 4.x ROM...
Want to be on a stock one though not branded, & ideally one for a region/country that gets updates sooner & more regularly/reliably.
Click to expand...
Click to collapse
Can't speak to that can only speak to my experience sorry. But l suspect anything outside Telstra will trip knox. They have really locked these suckers down. I think some Devs have gotten around it but not for my devise N915G......yet.
Sent from one of my Notes.
Can anyone else help/advise on this? Thank-you.
jalyst said:
Can anyone else help/advise on this? Thank-you.
Click to expand...
Click to collapse
Not sure how the other poster had that happen (on their Note Edge I assume?) but anyway, you can't flash another region's Note 4 firmware like the good old days.
Samsung, for whatever reason, has made 20i-sh variants of the Note 4 and Australia has the N910G model. This G model is also used by India, Sri Lanka and Singapore (but Singapore has a different boot setup or kernel for some reason).
Your best bet is to flash XSA firmware which is Australian unbranded firmware, this will get updates quickest and it will remove any carrier bloat. Flashing this in Odin will not trip Knox, I've flashed it several times and even loaded the Indian firmware once and there were no issues but I've gone back o XSA. As soon as unbranded units start receiving the Lollipop OTA (reckon maybe another 6 monts? Sigh) you'll get it too instead of waiting for Telstra to delay it another 2-3 months.
Here's the link to it on Sammobile: http://www.sammobile.com/firmwares/download/39199/N910GDTU1ANK3_N910GXSA1ANK3_XSA/
Thanks mate,
So you reckon none of the countries in our pool*, will get it substantially -or even mildly- sooner than Oz?
If yes, what do you base that on?
Thanks again!
*You sure it's just India/SL/Sg?
jalyst said:
Thanks mate,
So you reckon none of the countries in our pool*, will get it substantially -or even mildly- sooner than Oz?
If yes, what do you base that on?
Thanks again!
*You sure it's just India/SL/Sg?
Click to expand...
Click to collapse
Doubt it! There's only been one real update in nearly 6 months and that was just after release date...i think India got it slightly earlier? Can't really recall! If you check sammobile.com and look at firmware for N910G you can see that these are the only countries. Any updates after November 2014 are carrier specific ones, but nothing for the unbranded models so it's hard to work out a trend of which country gets the updates earliest.
Don't even bother with Singapore because of the difference in their hardware, it's either India or Australia you have to pick from. And if you flash the Indian firmware you'll get charged for a stupid international Sms message to India when you first boot that it doesn't warn you about.
I asked the same question over at Sammobile and indications are that it won't trip Knox by flashing the Indian variant on an Australian phone. I haven't tried it myself though. But quite close to taking the plunge
tryfound said:
Samsung, for whatever reason, has made 20i-sh variants of the Note 4 and Australia has the N910G model. This G model is also used by India, Sri Lanka and Singapore (but Singapore has a different boot setup or kernel for some reason). Your best bet is to flash XSA firmware which is Australian unbranded firmware, this will get updates quickest and it will remove any carrier bloat. Flashing this in Odin will not trip Knox, I've flashed it several times and even loaded the Indian firmware once and there were no issues but I've gone back o XSA. As soon as unbranded units start receiving the Lollipop OTA (reckon maybe another 6 monts? Sigh) you'll get it too instead of waiting for Telstra to delay it another 2-3 months.
Click to expand...
Click to collapse
So it looks like the LP OTA came out much sooner that you were lamenting!?!
Just in time for me, as I only got my Note4 last Wednesday evening
Still debating though, whether or not to go for one of the other variants listed here:
http://www.sammobile.com/firmwares/database/SM-N910G/
Love to know if any of them have a track-record of getting it several wks (or more) sooner than Oz.*
Finally....
What do I need to proceed, just Odin & then away we go? Is it available for OSX , or is it Windows only?
I have access to a Windows env, so no "biggy" either way...
*I don't care about a 1 off international SMS charge, I'll also steer clear of Singapore ofc
I've since determined that yes, Odin is all I need, I think, & it's def. Windows-only, I think.
Main thing holding me up now, is this...
http://forums.whirlpool.net.au/forum-replies.cfm?t=2382726&p=40#r786
Several more posts back n forth after that one.
After all that's done, I'll be good to go with installing Odin & Kies in my Win10 VM, & then proceeding with the flashing.
But only after I've decided that I def. want to go for the Aussie ROM, or one of the others (excluding Singapore).
jalyst said:
So it looks like the LP OTA came out much sooner that you were lamenting!?!
Just in time for me, as I only got my Note4 last Wednesday evening
Still debating though, whether or not to go for one of the other variants listed here:
http://www.sammobile.com/firmwares/database/SM-N910G/
Love to know if any of them have a track-record of getting it several wks (or more) sooner than Oz.*
Finally....
What do I need to proceed, just Odin & then away we go? Is it available for OSX , or is it Windows only?
I have access to a Windows env, so no "biggy" either way...
*I don't care about a 1 off international SMS charge, I'll also steer clear of Singapore ofc
Click to expand...
Click to collapse
It was still about a month earlier! But not as bad as I was predicting You'll need Windows, I've never had luck on my macbook using variants of Odin designed for Mac, it's just too much hassle IMO.
You don't have many variants to pick from, India got the only two main updates that have been released for the 910G model 2 out of 2 times quicker than AU or Singapore so if you want the quickest updates and also want your gallery pics to auto-rotate along with being able to share to an email client from an image in the gallery then you'll be happy with the Indian ROM.
Just need to download the firmware, run Odin, turn off phone then hold Vol Down + Power until it loads 'Download Mode'. Press Vol Up to continue, plug your phone into PC, Odin will detect the phone (which you can tell if you see a port number appear) then click on the 'AP' button and locate the unzipped firmware file and flash. Takes a few minutes.
What about Sri-lanka, or that "Unknown" variant?
Hmm that last paragraph, little too vague for my liking, you aware for any detailed step-by-step tutes?
Thank-you!
Other notes:
http://forums.whirlpool.net.au/whim/?action=read&m=4421880
jalyst said:
What about Sri-lanka, or that "Unknown" variant?
Hmm that last paragraph, little too vague for my liking, you aware for any detailed step-by-step tutes?
Thank-you!
Click to expand...
Click to collapse
Wouldn't bother with them! Actually, the steps are better explained on Sammobile under the download link. So this would be your preferred firmware along with better instructions.
They're not really detailed because it's a lot easier than it sounds, but if you're worried might be better to watch a youtube video first to get a visual i.e, https://youtu.be/Ulz-1UYzHBA
That vid shows it being done for the S4 but Odin is for most samsung phones so the steps are the same.
Lol mate I live in australia and you can flash any rom from any country as long as its samsung offical. I have got samsungs from all carriers and I flash tje australian open to all carriers immediately. You will be fine as long as its OFFICAL SAMSUNG FIRMWARE
Sent from my SM-N9005 using XDA Free mobile app
shotgun1976 said:
Lol mate I live in australia and you can flash any rom from any country as long as its samsung offical. I have got samsungs from all carriers and I flash tje australian open to all carriers immediately. You will be fine as long as its OFFICAL SAMSUNG FIRMWARE
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
I think tryfound has a pretty good idea of what he's talking about, no need to "LOL".
He's from Oz too, a regular at WP (Whirlpool) no less...
Read all the posts again. You've missed one of the main points being made;
Hint: it's nothing to do with not being able to flash some CV's that are official Samsung fw.