Contact list Bug - Samsung Galaxy S7 Edge Questions and Answers

Hello guys,
i'm facing a strange problem with my s7 edge, it just mix the contacts number randomly. Many times i'm trying to call someone and when i do i found that it's not the one i'm trying to call!! after a deep look into my contact list i found that the phone is copying another contact phone number to another contact name, i will have two numbers under the same contact name, and when i press edit i just see the original number, the other number "the one the phone copy it himself" isn't there! i tried to show only my device contacts or google account contacts but still same problem.
Any ideas! thanks

This has never happened on my edge. Are you using any third party contact apps or dialers?

No just the regular contact app

Related

number recognition

hello,
when someone calls my diamond II
it only shows the number of the caller, but not the name even though they are in my contacts how can i change this so it says who calles by name instead of number..
thanks for any reply
This sometimes happen if you have multiple entries of the same number....then phone shows only number and no name.....Is this happening for each incoming call..or just for few contacts...
for all contacts it happens, but most do have an mobile number and an home number..
can i change anything to fix it? or is it a fault on the diomand II .
Multiple numbers for same contact should not be a problem, but multiple contacts for the same number sometimes causes this....fr me it is working fine, so it should not be a TD2 bug..
pgu said:
Multiple numbers for same contact should not be a problem, but multiple contacts for the same number sometimes causes this....fr me it is working fine, so it should not be a TD2 bug..
Click to expand...
Click to collapse
all contacts have just one mobile number and one home number so i don't know where to search a solution
but thanks for your reply
Try to not use the prefix.
(+countrycode)
Should do the trick
this was discusserd once already (I think. I can recall the drop the prefix solution). Search a bit. alas, I will give you a link if I find one
Im having a similar problem. The caller id dosent work for some of my contacts, both when they phone me or when they send a SMS. Im sure they are saved in my phone and not on my sim and from what I can see there isn´t any difference from how they are saved in my phone book from the ones that the caller id works for. Its really strange and annoying. Hope someone has a solution for this problem.
Did you try just delete that contact and make it again. I know it's stupid question but ...
prdic said:
Did you try just delete that contact and make it again. I know it's stupid question but ...
Click to expand...
Click to collapse
yes i did. I also tested to make a new contact from the sms view with the option save contact with the actual number that shows instead of the name and it still didnt work. Thanks anyway.
Hey,
I've had the same problem since day of purchase. I did the reg edit to increase the numbers the phone looks at to identify a number but it still didn't work. I've also deleted and re-created the contacts with no success.
ALL,
I had this problem. I submitted the case to HTC Europe but I did not even get a call back after a few months had passed.
Unfortunately the only way to do this is to hard reset the phone.
You will loose all your phone data (contacts etc) but the files on your memory card will be ok.
When you reset the phone, even if you have NO contacts at all on your sim card, you still have to tell the wizard on the first boot to import your SIM contacts. This, for some silly reason, is the only way to get the phone to register the phone contacts from your phonebook, even if you are just using the non-SIM contacts.
I had no numbers on my SIM card and of course I did not select the option to import my contacts. I was going to do that myself via Outlook. Once I selected not to import the contacts, not one number was recognized.
I did a Hard Rest. If you have numbers or not on your SIM does not matter. Allow the initial start-up wizard to import from the SIM. Then continue.
This solved this VERY ANNOYING issue for me. I used SPB backup first to take a copy of my phone data before the reset.
- Geoff
i had this problem too, solution is change registry:
HKCU\ControlPanel\Phone\CallIDMatch:9(DWORD)
this means phone will identify number by 9 last digits - meaning its ignoring country code.
*if 9 not working for you try 10/11/12... one of these should fix.
bnm7bnm said:
i had this problem too, solution is change registry:
HKCU\ControlPanel\Phone\CallIDMatch:9(DWORD)
this means phone will identify number by 9 last digits - meaning its ignoring country code.
*if 9 not working for you try 10/11/12... one of these should fix.
Click to expand...
Click to collapse
hello
today I tried all the numbers, from 7 to 12
11 was the value that made me look some of my callerID. now I have the same problem, but not with everybody, but only some people
let's say a 50% of my contacts are shown on the screen when they are calling me/sending me an sms, but the other 50% doesn't show me the name but just the number.
today I tried with my mom's phone to call me. it didn't show the name. So i deleted her name from the contact, and added it again (from the missing call). now it's showing her name... Do I have to do it with all the phonebook?
is there something I can do to fix it? it's making me crazy
please help me..
I have, absolutely same problem, erasing the contact and creating it again, did not solve, very very strange. I've tried iterchange of numbers home>work, work>home, work> auto, home > auto, invane, some of contacts refuse to display name, compared the phones i have no same numbers for names ecc. First of all i have to mention that numbers have been migrated from Nokia 6230i via Outlook Express > Outlook > Phone , some of the numbers like Home, Bussiness Fax ecc, did not passed to Diamond 2
I've just noticed that a Hotfix was released a few days ago, which just might solve this problem.
Titled: Update for HTC Touch Diamond2 for Caller ID Display
I haven't tested it yet, so let us know if it works for anyone
try to make all contacts same format with TrineFix or similar app,
set numbers without country code, for example in israel i set 05XXXXXXXX instead of +9725XXXXXXXX, then i change CallIDMatch to 8.
this is how it works for me.
I had a problem with none of my contacts names coming up when they called me, it would only show their number. After x2 software resets and installing everything again I found the problem, when you do a software reset and you turn the phone on for the first time when it asks you to import from your sim card contacts DONT DO THIS if you sync your phone with Active Sync and outlook contacts as this is where the problem is.
If you import your contacts from your sim and you sync with outlook then your caller id's will not work.

[Q] Contact details problem

Something is up with my contacts. If I search for some people I'll get the result and see their number under their name. When I tap the name the contact opens but no phone number is listed, just all the other contact items.
For the contacts this happens to I can only call them from the diaper contacts list with the green phone icon. Even then it's random as to what number it calls if they have more than one.
Anyone else seen this behavior and/or know of a fix?
Apparently, you're not the only one with the problem. I guess it's the new blur thing. For example, my girlfriend's info, I can see everything but her phone #'s under "Contacts", without the green call icon. As far as it being random to what # it calls... I haven't had that problem... I do understand your frustration with it though but nothing's major with your phone, it's just a stupid perk moto made.
Thanks for the feedback. At least I'm not going to do a factory reset now to try and fix it. I'll just hold tight for an update and or a cool rom.
I've noticed that it happens on contacts that have facebook accounts attached. Deleting your facebook account from "my accounts" might fix it, I haven't tried. If you go to the contacts list under the phone program it will allow you to access the numbers.

[Q] Dialing problem with Milestone 2

If I try to dial a german number beginning with "01" it always sends me back to the homescreen.
I can dial all other numbers except for numbers beginning with "01". But all mobile phone numbers in Germany start with "01" so its a big problem for me.
Can anyone help?
I have the same problem, it´s just not "01", it´s several numbers like "25", "02". I also did a factory reset, and it changed the numbers, before it was "07" and "05" but now they work and others do the same thing. I phoned up the place where I have to send the phone for repair and they said it´s most likely a software issue, it happens when new phones come out. So yeah, call the shop where you bought it from and they will tell you what to do and who to contact for further details. Best of luck!
Edit: I fixed it BY MISTAKE! (lol)
My solution: I delete all my contacts (because I didnt want to send it in with the contacts) and then I tried it out and it worked! I also noticed every time I clicked the green button to call someone, it was on the tab "contacts" instead of "dialler". Another thing, before when I typed "25" I was sent to my homescreen, but not that I reset all my contact when I type "25", one of my numbers appear highlighted with "25" so I am pretty sure that there was a glitch with some of my contacts and now it doesn´t bug up. Try it out and let me know =)
Solution: Delete all contacts, restart, copy contacts back from sim! Voila =)
I had a similar problem with my Milestone 2 when I dialed "22". The dialer would simply close. After some experimentation, I found that the problem only happened when my Facebook contacts were hooked into the phone. By chance, I found that my first Facebook contact had put a non-numeric phrase in his mobile telephone number field on Facebook, and once I had unfriended him, and reset my contacts, then everything worked fine.
So if the dialer is shutting unexpectedly, then checkout whether any of your contacts have a non-numeric phone number.
Hope this helps.
Cheers,
Steve.
I've got the same problem when I type +3939, it's a big problem because I'm Italian!
No problem by typing the numbers you posted before.

Help: Cannot add number to contacts?

This is a really strange problem and I'm hoping someone can help me with it.
For some reason on my Treo Pro, there is this one specific random phone number which, although I can add it to a new or existing contact and it will show up correctly under that person in the Contacts app, does not seem to be recognized, remembered or associated throughout the rest of the phone.
Meaning, if I get an incoming call from that number it shows up as an unknown caller, displaying the number but no associated contact name. If I check my call log the number shows up there, rather than the contact name. Also in text messages, it just shows as the number by itself, again rather than the contact name to which it belongs. If I tap on that number in the SMS dialog, it tells me "This person is not in your contact list..." and asks me if I want to add them. And whether I add that number to an existing contact or create a new one for it, nothing changes. If I tap the number again, it still tells me it is not in my contact list. Over, and over, and over again. It just will not "stick" or take, permanently.
There is nothing odd about the actual number itself. It's the exact same format as all the other numbers in my contacts (1-416-xxx-xxxx). And I've tried adding the number in every possible way, with and without area code, '+' sign, '1' in front etc.. nothing makes a difference. I've rebooted the phone after adding it, and still no effect. It just will not recognize this phone number as belonging to a contact, even though under the contact it appears correctly, and I can call or text it from the contacts app.
Is there any reason this would be happening, or any way to fix it? Any help is greatly appreciated, thanks...
I have the same frustrating problem on my Treo Pro - contact names do not display even though they are saved to phone memory. The only solution I have found is to delete the contact and create a new one e.g. from the number that appears in call log or SMS. I presume the reason is Sprite Backup doing somethig wrong with the databases when restoring contacts after hard reset.

Samsung stock dialer issue

Hi guys
Has anyone noticed that when searching for a contact (T9 search) in samsung stock dialer, the search function it only lists the first number for a contact if they have more than 1 applied to their card. Problem is you can't view other numbers, it just immediately starts dialing that one number instead if you try to select it ( there is no way to select and see the other numbers)
I have contact with 3-4 numbers so its annoying me. I know there is Dialer One, Go contacts etc but none of them have the clean interface the stock dialer has .
If you click the contact photo it shows all the numbers.
At least my one does....
I'd hate to bring up an old thread, but I used the magical search button and found this thread.
I have this problem, too, and it's really annoying.
Pressing the contact photo doesn't bring up the rest of the numbers for me.
If it helps, my contacts are synced via my google account, and I have a feeling this doesn't happen for contacts locally stored on the phone.
Does anybody have a solution for this?
I'm currently using a different dialer, but I'd prefer to stick to Samsung's dialer if possible.

Categories

Resources