GRAND PRİME G530F TWRP RECOVERY ! help me ! - unmodified sytstem partition detected - - Galaxy Grand Prime Q&A, Help & Troubleshooting

GRAND PRİME G530F TWRP RECOVERY ! help me ! - unmodified sytstem partition detected -
hi , I have grand prime g530f models. I used flashing twrp recovery for grand prime g530f with odin. But open the twrp recovery " Unmodified system partition detected " failed. Please help me ! (so bad my english)

It's not an error. TWRP is simply detecting that your system partition has never been mounted r/w. You can either tap the keep read only button to do just that... keep your system partition read only, or you can swipe to allow modification.

TWRP link ???

myblackwhite said:
TWRP link ???
Click to expand...
Click to collapse
my used twrp link
http s://yadi.sk/d/zXss9FrzuPaPt (please https fixed beetwen)

Ben türküm. Sende türksün sanırım. Türkçe konulabilirsin benle

Related

[Troubleshooting] GT-i9505 OB8 Suddenly Rebot !

Do it on your own responsibility! if you follow this guide properly u will be on the safe side
HI
I found a bug in GT-i9505 OB8 Update Lollipop
Suddenly Rebooting again and again or Stuck On Samsung Galaxy S4 Logo !
I Dont Know How But My Partitions Goes Wrong Or My Permissions !
When I Open Recovery
I see Error Like That :
Code:
unable to mount /efs
unable to mount /cache
unable to mount /system
unable to mount /data
And Bla Bla Bla ..
Solution :
1 . Download ODIN !
2. Download Stock Rom [Latest Lollipop Update] !
3.Flash Stock Rom Via ODIN
Please Ensure That
----------------------------
3.1 NAND ERASE ALL √
3.2 Re-Patriation √
---------------------------
4. Flash TWRP Recovery Via ODIN DOWNLOAD FROM TWRP SITE .TAR File Of Any Version !
5. Open Twrp Recovery
6. Wipe --->> Format DATA ----> YES
7. Advance ----->> FIX PERMISSIONS --->> SWIPE
8 REBOOT ! [Enjoy]
If This Post Helps You Then Press Thanks Button
This Is My First Post ... !

unable to mount efs !

When I format the phone and install a custom recovery (twrp recovery) , I tried to install cm12.1 but I have a message said (unable to mount efs)
My phone is sm-g530h
Sorry for bad English. .
Yes, my phone is stuck at booting. And EFS error :'(

Twrp mod block

I have installed twrp recovery my phone. My Phone : SM N9000Q after
Once entered into the recovery mode, the phone returns to the old recovery mode
I have installed Twrp recovery mode but then I went in and could not get into any more twrp
Sorry my bad english
factor19300 said:
I have installed twrp recovery my phone. My Phone : SM N9000Q after
Once entered into the recovery mode, the phone returns to the old recovery mode
That means you have failed to install TWRP (read the TWRP thread )
fail to install correctly or wrong file used are the standard errors .
Your model is EXYNOS .
https://forum.xda-developers.com/ga...rp-3-0-2-1-recovery-multilanguage-27-t3406551
Click to expand...
Click to collapse
JJEgan said:
factor19300 said:
I have installed twrp recovery my phone. My Phone : SM N9000Q after
Once entered into the recovery mode, the phone returns to the old recovery mode
That means you have failed to install TWRP (read the TWRP thread )
fail to install correctly or wrong file used are the standard errors .
Your model is EXYNOS .
https://forum.xda-developers.com/ga...rp-3-0-2-1-recovery-multilanguage-27-t3406551
Click to expand...
Click to collapse
https://dl.twrp.me/ha3g/
Is this recovery mode warn?
Click to expand...
Click to collapse

[SOLVED] [Loop] Your device is corrupt it cannot be trusted and will not boot

Hello,
I have an issue with my brand new G6.
It is in a loop "Your device is corrupt it cannot be trusted and will not boot" , no more recovery available.
What i did:
I unlocked the bootloader and flashed Magisk via TWRP the device displayed that the partition was corrupt and need to be erased.
After that the device was in a loop to twrp, whatever the wipe or ... no system boot.
I read that i had to format the data partition so i adapted a what i found here to my available partitions
https://forum.xda-developers.com/tmobile-lg-g3/general/fix-recovery-loop-twrp-computer-t2873386
the device is now in a constant loop.
Does someone can help me please ?
is there any way to recover it ? download mode ? how ?
Update : I succeed to boot into download mode but LGUP gives me an error while trying to flash
error 0x2000 ... ... cefs::initialize()
docizoc said:
Hello,
I have an issue with my brand new G6.
It is in a loop "Your device is corrupt it cannot be trusted and will not boot" , no more recovery available.
What i did:
I unlocked the bootloader and flashed Magisk via TWRP the device displayed that the partition was corrupt and need to be erased.
After that the device was in a loop to twrp, whatever the wipe or ... no system boot.
I read that i had to format the data partition so i adapted a what i found here to my available partitions
https://forum.xda-developers.com/tmobile-lg-g3/general/fix-recovery-loop-twrp-computer-t2873386
the device is now in a constant loop.
Does someone can help me please ?
is there any way to recover it ? download mode ? how ?
Update : I succeed to boot into download mode but LGUP gives me an error while trying to flash
error 0x2000 ... ... cefs::initialize()
Click to expand...
Click to collapse
Can you boot to TWRP?
Did you make a backup and have access to it? Especially the EFS partition? If you do, restore the EFS partition.
If you can boot to TWRP, try the following:
- wipe everything (the option where you have to type 'yes').
- download lineageOS and flash it. If this is working fine, install whatever ROM you want to install.
no access to twrp anymore , no backup , only access to download mode now
is there a way to flash back twrp or stock recovery from download mode ? boot into fastboot ?
(i know... i have no excuses , but made that so many times without issues ...)
thank you in advance
Maybe you should go in download mode and flash stock Rom with LGUP.
LGUP gives me an error while trying to flash the rom error 0x2000 ... ... cefs::initialize()
Can you flash twrp through lgup or fastboot?
For those that could be in the same situation i finally succeed to flash with LGUP last version but without the 8894DLL
the error was probably coming from the dll.
Cheers and thanks all for the answers
docizoc said:
LGUP gives me an error while trying to flash the rom error 0x2000 ... ... cefs::initialize()
Click to expand...
Click to collapse
It's probably a problem with the DLL, try to extract it from the kdz and input it in Lgup folder (I don't remember where and I'm not home, check the main thread for that) and after that retry flashing
EDIT : well you were faster than my phone glad it worked for you.

samsung s4 mini GT-I9195 LTE dead phone

hello guys
i need help about flashing my 2 dead phone GT-I9195.
in my laptop it shown : Qualcomm HS-USB QDLoader 9008 .
i know we can't use qpst so sad .
i'm searching for solution without the z3x box or any other items.
First i follow this guide :
LINK (
[HARD BRICK ?] - I919x - Make your debrick.img and have it on extSdCard by security
Hi People We all must have the debrick.img on our extSdCard by security. If we have a Hard Brick we can make like this examples solved whit success. See two HARD BRICK's solved. I have sending them the debrick.img: This whit a Guide...
forum.xda-developers.com
)
debrick.img 4.4.2 -> LINK (https://mega.nz/#!T9hxAJQC!e74HQeHhU66fmPFVFOLdxTtFyR-fxntfc37qFb22oRA)
i use Win32DiskImager to flash the debrick.img in 16GB Sd card
i put sd card in the phone.
the phone boot to T-flash(Odin) .
i use the CSB_signed_SERRANOLTE_ONEPIT_OPEN_130523.pit and then i flash I9195XXUCQL2_I9195XXUCQL2.tar from TRWP guide : LINK (
[RECOVERY][OFFICIAL] TWRP 3.5.2_9-0 [I9190][I9192][I9195][L520]
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and...
forum.xda-developers.com
)
i tried TRWP , CWM recovery.img and both worked.
in TRWP only focused on the internal Storage and it is 0 MB , can not wipe or mount or do anythink , i want to change TRWP to see the SD CARD.
so with CWM i can use adb sideload to falsh zip file.
i try cm-13.0-20161219-NIGHTLY-serranoltexx.zip with adb : not work ,no system shown.
when i change the phone to download mode i flashed :
I9195XXUCQL2_I9195TMZCQL2_I9195XXUCQL2_HOME.tar ,
I9195XXUCPB1_I9195ITVCPB2_I9195XXUCPB1_HOME.tar ,
I9195XXUCNH5_I9195OJVCNH1_I9195XXUCNH5_HOME.tar.md5 ,
I9195UBUCOH1_I9195ZVVCNI1_I9195UBUCOH1_HOME.tar.md5.
no system shown , and the phone back to the T-flash and i do the same reflash CSB_signed_SERRANOLTE_ONEPIT_OPEN_130523.pit and I9195XXUCQL2_I9195XXUCQL2.tar to can boot to download mode.
The big problem is there is no system. only i can use download mode and recovery mode(TRWP , CWM).
I want the phone to have system
please anyone can help me , i'll do my best in research.
chakroun saifallah said:
hello guys
i need help about flashing my 2 dead phone GT-I9195.
in my laptop it shown : Qualcomm HS-USB QDLoader 9008 .
i know we can't use qpst so sad .
i'm searching for solution without the z3x box or any other items.
First i follow this guide :
LINK (
[HARD BRICK ?] - I919x - Make your debrick.img and have it on extSdCard by security
Hi People We all must have the debrick.img on our extSdCard by security. If we have a Hard Brick we can make like this examples solved whit success. See two HARD BRICK's solved. I have sending them the debrick.img: This whit a Guide...
forum.xda-developers.com
)
debrick.img 4.4.2 -> LINK (https://mega.nz/#!T9hxAJQC!e74HQeHhU66fmPFVFOLdxTtFyR-fxntfc37qFb22oRA)
i use Win32DiskImager to flash the debrick.img in 16GB Sd card
i put sd card in the phone.
the phone boot to T-flash(Odin) .
i use the CSB_signed_SERRANOLTE_ONEPIT_OPEN_130523.pit and then i flash I9195XXUCQL2_I9195XXUCQL2.tar from TRWP guide : LINK (
[RECOVERY][OFFICIAL] TWRP 3.5.2_9-0 [I9190][I9192][I9195][L520]
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and...
forum.xda-developers.com
)
i tried TRWP , CWM recovery.img and both worked.
in TRWP only focused on the internal Storage and it is 0 MB , can not wipe or mount or do anythink , i want to change TRWP to see the SD CARD.
so with CWM i can use adb sideload to falsh zip file.
i try cm-13.0-20161219-NIGHTLY-serranoltexx.zip with adb : not work ,no system shown.
when i change the phone to download mode i flashed :
I9195XXUCQL2_I9195TMZCQL2_I9195XXUCQL2_HOME.tar ,
I9195XXUCPB1_I9195ITVCPB2_I9195XXUCPB1_HOME.tar ,
I9195XXUCNH5_I9195OJVCNH1_I9195XXUCNH5_HOME.tar.md5 ,
I9195UBUCOH1_I9195ZVVCNI1_I9195UBUCOH1_HOME.tar.md5.
no system shown , and the phone back to the T-flash and i do the same reflash CSB_signed_SERRANOLTE_ONEPIT_OPEN_130523.pit and I9195XXUCQL2_I9195XXUCQL2.tar to can boot to download mode.
The big problem is there is no system. only i can use download mode and recovery mode(TRWP , CWM).
I want the phone to have system
please anyone can help me , i'll do my best in research.
Click to expand...
Click to collapse
Hello , i think you wiped your system you have to install another one. Try Lineage Os
If it does not work try shutting down the phone, remove battery and hold power button for 30 seconds.
Zac C4rter said:
If it does not work try shutting down the phone, remove battery and hold power button for 30 seconds.
Click to expand...
Click to collapse
remember i can't control the internal storage because the phone is dead , i only have the files and partitions in the SD card(external Storage) .
i already tried Lineage Os . the CWM say
+ can't mount /cache/system , mount : failed .... and long message.
it show erreur then installation aborted.
all this because the partition is in /storage/sdcard1.
so how i should redirect the installation ?
chakroun saifallah said:
remember i can't control the internal storage because the phone is dead , i only have the files and partitions in the SD card(external Storage) .
i already tried Lineage Os . the CWM say
+ can't mount /cache/system , mount : failed .... and long message.
it show erreur then installation aborted.
all this because the partition is in /storage/sdcard1.
so how i should redirect the installation ?
Click to expand...
Click to collapse
Try switching to Ext4
:Edit
Also Check Here https://appuals.com/how-to-fix-twrp-unable-to-mount-storage-internal-storage-0mb/
Zac C4rter said:
Try switching to Ext4
:Edit
Also Check Here https://appuals.com/how-to-fix-twrp-unable-to-mount-storage-internal-storage-0mb/
Click to expand...
Click to collapse
i have tried it all the 11 steps and not work. internal storage is 0 MB
i'm using trwp 3.5.0_9.0
after i flashed the SD card with Win32DiskImager and with the debrick.img , everythink now is in the external storage, my problem is i can't access to it, or install zip file with trwp or cmw because i can't mount the partitions in trwp or cwm.
i only can use download mode to flash files by odin
i want to know if i can do it manuelly by termianl commends in trwp .
but how i can know the places of the unmounted partitions ?

Categories

Resources