Twrp mod block - Galaxy Note 3 Q&A, Help & Troubleshooting

I have installed twrp recovery my phone. My Phone : SM N9000Q after
Once entered into the recovery mode, the phone returns to the old recovery mode
I have installed Twrp recovery mode but then I went in and could not get into any more twrp
Sorry my bad english

factor19300 said:
I have installed twrp recovery my phone. My Phone : SM N9000Q after
Once entered into the recovery mode, the phone returns to the old recovery mode
That means you have failed to install TWRP (read the TWRP thread )
fail to install correctly or wrong file used are the standard errors .
Your model is EXYNOS .
https://forum.xda-developers.com/ga...rp-3-0-2-1-recovery-multilanguage-27-t3406551
Click to expand...
Click to collapse

JJEgan said:
factor19300 said:
I have installed twrp recovery my phone. My Phone : SM N9000Q after
Once entered into the recovery mode, the phone returns to the old recovery mode
That means you have failed to install TWRP (read the TWRP thread )
fail to install correctly or wrong file used are the standard errors .
Your model is EXYNOS .
https://forum.xda-developers.com/ga...rp-3-0-2-1-recovery-multilanguage-27-t3406551
Click to expand...
Click to collapse
https://dl.twrp.me/ha3g/
Is this recovery mode warn?
Click to expand...
Click to collapse

Related

[Help Needed] Unable to enter into the download mode

hello
i messed up with my device and i can't mount any of the partitions nor unable to enter into the download mode to flash stock rom...
Even "adb reboot download" too not working...
Fastboot mode is working...
Can flash into twrp but unable to mount partitions.... So unable to flash custom roms...
please help me...
Thank You....
princemouli said:
hello
i messed up with my device and i can't mount any of the partitions nor unable to enter into the download mode to flash stock rom...
Even "adb reboot download" too not working...
Fastboot mode is working...
Can flash into twrp but unable to mount partitions.... So unable to flash custom roms...
please help me...
Thank You....
Click to expand...
Click to collapse
Press VOL UP along with POWER KEY and release power key once the lenovo logo shows, while still pressing the VOL UP. This will boot into DOWNLOAD MODE
sasukay said:
Press VOL UP along with POWER KEY and release power key once the lenovo logo shows, while still pressing the VOL UP. This will boot into DOWNLOAD MODE
Click to expand...
Click to collapse
Thanks for ur reply...
I tried it but still unable to boot into download mode...
princemouli said:
Thanks for ur reply...
I tried it but still unable to boot into download mode...
Click to expand...
Click to collapse
Brother, I'm not exactly a expert in this case, but I cam suggest you a few hit n trials.
Boot into recovery, go to mount and click on system, data, cache, dalvik, etc.
If you've tried doing so, then go to advanced, then to terminal and type in "mount /system" and others. If still this doesn't work. Then better try the cwm recovery. The unable to mount system has happened to me, and that time CWM came to my rescue.
sasukay said:
Brother, I'm not exactly a expert in this case, but I cam suggest you a few hit n trials.
Boot into recovery, go to mount and click on system, data, cache, dalvik, etc.
If you've tried doing so, then go to advanced, then to terminal and type in "mount /system" and others. If still this doesn't work. Then better try the cwm recovery. The unable to mount system has happened to me, and that time CWM came to my rescue.
Click to expand...
Click to collapse
Can you please send me the link for CWM recovery...
Thank you
princemouli said:
Can you please send me the link for CWM recovery...
Thank you
Click to expand...
Click to collapse
HERE IT IS
is the download mode only available on lenovo stock rom ?
sasukay said:
HERE IT IS
Click to expand...
Click to collapse
Getting this error "FAILED (remote: dtb not found)"
princemouli said:
Getting this error "FAILED (remote: dtb not found)"
Click to expand...
Click to collapse
Try this instead:
Code:
fastboot boot cwm.img
sasukay said:
Try this instead:
Code:
fastboot boot cwm.img
Click to expand...
Click to collapse
did same....
still error...
princemouli said:
did same....
still error...
Click to expand...
Click to collapse
Bro, I did some research but couldn't find anything useful.
Have you tried booting into download mode by pressing VOL UP + POWER KEY and releasing power key once the logo shows up.
And, which recovery (with version) are you using.
​
sasukay said:
Bro, I did some research but couldn't find anything useful.
Have you tried booting into download mode by pressing VOL UP + POWER KEY and releasing power key once the logo shows up.
And, which recovery (with version) are you using.
Click to expand...
Click to collapse
Still unable to flash the stock rom....
try :
Code:
adb reboot bootloader
of course usb debugging must enabled and pc authorized.
sasukay said:
Try this instead:
Code:
fastboot boot cwm.img
Click to expand...
Click to collapse
brother tried many methods but non of them worked....
can you please upload the drivers u have used to flash the stock rom
also is there any method to restore this menu to enter into download mode (see the image in attachment) using fast boot mode....
princemouli said:
brother tried many methods but non of them worked....
can you please upload the drivers u have used to flash the stock rom
also is there any method to restore this menu to enter into download mode (see the image in attachment) using fast boot mode....
Click to expand...
Click to collapse
Bro I'll suggest you to get a twrp backup from somewhere and then restore it. I don't have bandwidth left, so you should ask some other user for this.
Also, you never told, how this all even started.
get the adb tools this link:
http://forum.xda-developers.com/lenovo-a6000/how-to/root-root-lenovo-a6000-plus-lollipop-t3199532
---------- Post added at 12:02 PM ---------- Previous post was at 12:02 PM ----------
get the adb tools this link:
http://forum.xda-developers.com/lenovo-a6000/how-to/root-root-lenovo-a6000-plus-lollipop-t3199532
sasukay said:
Bro, I did some research but couldn't find anything useful.
Have you tried booting into download mode by pressing VOL UP + POWER KEY and releasing power key once the logo shows up.
And, which recovery (with version) are you using.
Click to expand...
Click to collapse
Brother thanks for ur help , now iam able to enter into download mode ,
Now Can you please provide me the direct download link to the stock firmware which can be flashed through downloader 1.0.2...
princemouli said:
Brother thanks for ur help , now iam able to enter into download mode ,
Now Can you please provide me the direct download link to the stock firmware which can be flashed through downloader 1.0.2...
Click to expand...
Click to collapse
Glad to hear that.
I hope you are following THIS GUIDE at boycracked. All the drivers and other softwares are listed there along with the download links.
Do note, that you have to flash the ROW Firmware (after extracting) and not the Stock ROM. The ROW firmware is available for A6000 only (and not A6000 plus), so you have to use that only, FROM THIS LINK. You can choose any of the ROW firmware. Flashing A6000s firmware won't affect anything except that your recent app cleaner will show 1GB of total RAM (only for display...actually the whole 2GB is used).
Later. after you recover your phone, you can flash the stock ROM or any other custom ROM or maybe leave it like that...
sasukay said:
Glad to here that.
I hope you are following THIS GUIDE at boycracked. All the drivers and other softwares are listed there along with the download links.
Do note, that you have to flash the ROW Firmware (after extracting) and not the Stock ROM. The ROW firmware is available for A6000 only (and not A6000 plus), so you have to use that only, FROM THIS LINK. You can choose any of the ROW firmware. Flashing A6000s firmware won't affect anything except that your recent app cleaner will show 1GB of total RAM (only for display...actually the whole 2GB is used).
Later. after you recover your phone, you can flash the stock ROM or any other custom ROM or maybe leave it like that...
Click to expand...
Click to collapse
Brother still unable to write firmware ...
flashing started but it too not able to write firmware...
used both qpst and downloader
qpst given message that flashing is successful
and downloader got hanged after flashing start
but still unable to boot the phone....
princemouli said:
Brother still unable to write firmware ...
flashing started but it too not able to write firmware...
used both qpst and downloader
qpst given message that flashing is successful
and downloader got hanged after flashing start
but still unable to boot the phone....
Click to expand...
Click to collapse
Did you followed each and every step as in the tutorial I mentioned...??
The key point is that you should have correct drivers installed and your device in download mode should be detected in device manager on PC as Qualcomm Preloader Diagnostic Mode whatever...
And keep im mind that you have to extract the 7z ROW Firmware file.

Issue regarding flash twrp recovery

I`m not able to flash twrp recovery in my phone Odin pass flashing process but phone wont boot in twrp recovery please help
Salmaster007 said:
I`m not able to flash twrp recovery in my phone Odin pass flashing process but phone wont boot in twrp recovery please help
Click to expand...
Click to collapse
See atfirst check that twrp is for ur android version or not.means there is different twrp available for different version.else mention ur model no i ll give u that link.before that in development mode unlock the oem.else it will show custom binary by frp lock.then flash the recovery twrp via odin 12.3 for mm or odin 10.6 for lollipop.enjoy
aslam4580 said:
See atfirst check that twrp is for ur android version or not.means there is different twrp available for different version.else mention ur model no i ll give u that link.before that in development mode unlock the oem.else it will show custom binary by frp lock.then flash the recovery twrp via odin 12.3 for mm or odin 10.6 for lollipop.enjoy
Click to expand...
Click to collapse
developer option is enable
OEM unlock is enable
USB debugging is enable
Model no. is SM-J500F.Device is currently running on marshmallow 6.0.1
please help
Salmaster007 said:
developer option is enable
OEM unlock is enable
USB debugging is enable
Model no. is SM-J500F.Device is currently running on marshmallow 6.0.1
please help
Click to expand...
Click to collapse
Ok bro.as ur information,here i have attached both odin and recovery twrp for ur mobile.just download both file and copy to ur pc.then extract odin and run as adminstrator.in ap select that recovery file afterwards put ur mobile in download mode and start.afterwards it will reboot then again turnoff ur phone and press (power off+middle button+volume up) button together.
Then u ll get twrp...nd enjoy bro
Download link for recovery:https://mega.nz/#!MkMlXS7Q!KoTmoNDKE_Ok1T2sEG4GA-1SBJXsnz6y1zV2iRTLbZk
Download link for odin:https://mega.nz/#!sxkXRSaJ!eP9mI8y4Z9Mxqu2cKLm4vjQ1PcoXE_iyq7eiKQtuUlg
Its for 2015 j500f mm version and i have checked both file is working fine.
aslam4580 said:
Ok bro.as ur information,here i have attached both odin and recovery twrp for ur mobile.just download both file and copy to ur pc.then extract odin and run as adminstrator.in ap select that recovery file afterwards put ur mobile in download mode and start.afterwards it will reboot then again turnoff ur phone and press (power off+middle button+volume up) button together.
Then u ll get twrp...nd enjoy bro
Download link for recovery:https://mega.nz/#!MkMlXS7Q!KoTmoNDKE_Ok1T2sEG4GA-1SBJXsnz6y1zV2iRTLbZk
Download link for odin:https://mega.nz/#!sxkXRSaJ!eP9mI8y4Z9Mxqu2cKLm4vjQ1PcoXE_iyq7eiKQtuUlg
Its for 2015 j500f mm version and i have checked both file is working fine.
Click to expand...
Click to collapse
Still Im facing same issue
Which recovery are you using ? The one from Nick Verse won't work with the secure bootloader of the latest Mashmallow updates , when I tried i could not boot into recovery using that one ...
The one from this thread is working perfectly for me at the moment :
http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j500f-t3416960
Try the twrp made by ganesh varma.
1-in odin Untick Auto reboot option.
2-After flushing twrp by Odin, remove the battery and insert it again .
3- press volume up+ home+power button to go to twrt.
4- install supersu.zip
I had this issue on j5h but after doing that i could root my phone.
Thanks Guys for your help..

Recovery is not seandroid enforcing, Set Warranty Bit : recovery (0) [G532M][6.0.2]

So, I tried flashing the recovery mode with the files from a tutorial, supposedly for this exact model
Aaaand it totally didn't work, my device didn't brick but I cannot enter recovery mode, it just says:
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit : recovery (0)
Aside of that, I can use it normally, but I can't seem to be able to root it without flashing.
What happens?
MxdMod said:
tried flashing the recovery mode for this exact model
What happens?
Click to expand...
Click to collapse
no recovery has been posted for g532 variants yet so u flashed wrong recovery thats why u'r recovery is stuck at that. download u'r official firmware and flash to solve the prblm that has arisen
root: http://forum.xda-developers.com/android/development/root-samsung-galaxy-j2-prime-g532m-t3523090
If you dont find twrp you can use flashfire after root :good:

Bricked S8, have tried multiple solutions

I successfully rooted my phone but it got stuck in a bootloop when I restarted it.
I can't enter recovery mode or turn it off, all I can do is enter odin mode.
I have tried:
1. The AGQ5 fix (https://forum.xda-developers.com/ga...g-aqg5-fix-t3636857/post73032395#post73032395) it doesn't work.
2. Smart switch, it says my device is unsupported
Please help!
1- flash twrp again
2- flash stock rom with odin ( download mode )
you can reboot just with vol - + shut down B
you maybe installed the wrong version of twrp the latest one is for the new bootloader if you have the older bootloader install the last version
It doesn't boot into TWRP even after I flash it again
djisgod said:
you maybe installed the wrong version of twrp the latest one is for the new bootloader if you have the older bootloader install the last version
Click to expand...
Click to collapse
Sorry if I'm asking a question but how do I check my bootloader version? I just used the latest version (twrp-3.1.1-0-herolte.img.tar) from a site but I can't link it.
popmpopm said:
1- flash twrp again
2- flash stock rom with odin ( download mode )
you can reboot just with vol - + shut down B
Click to expand...
Click to collapse
It doesn't boot into TWRP even after I flash it again
Flash full stock in odin. Then you can try twrp again if you wish.
It worked, thanks so much for all your help. Words cannot describe how grateful I am.
help
osidaksjdmw said:
It worked, thanks so much for all your help. Words cannot describe how grateful I am.
Click to expand...
Click to collapse
help me
how can did you get to download
HELP ! S8 Wont BOOT !!
I have the same problme! I can flash Combination file and then its booting and I can go to recovery mode ,but after when I flash again STOCK rom succesfully ,S8 wont boot Any Idea what is going on ? Im on U2CRED ....PLEASE HELP !!!!
zassamel said:
I have the same problme! I can flash Combination file and then its booting and I can go to recovery mode ,but after when I flash again STOCK rom succesfully ,S8 wont boot Any Idea what is going on ? Im on U2CRED ....PLEASE HELP !!!!
Click to expand...
Click to collapse
I can flash Combination file
Click to expand...
Click to collapse
What this supposed to me ?
samsung s8
StonebridgeGr said:
What this supposed to me ?
Click to expand...
Click to collapse
Combination File ,its AP witch allow you to bypass for example FRP lock
osidaksjdmw said:
I successfully rooted my phone but it got stuck in a bootloop when I restarted it.
I can't enter recovery mode or turn it off, all I can do is enter odin mode.
I have tried:
1. The AGQ5 fix (https://forum.xda-developers.com/ga...g-aqg5-fix-t3636857/post73032395#post73032395) it doesn't work.
2. Smart switch, it says my device is unsupported
Please help!
Click to expand...
Click to collapse
EXACT same problem. Put I cant flas anything via Odin. Not even TWRP. What do I do???
PLEASE help
benna said:
EXACT same problem. Put I cant flas anything via Odin. Not even TWRP. What do I do???
PLEASE help
Click to expand...
Click to collapse
why you cant? what error did it give you? might you dont have drivers installed on your pc?
StonebridgeGr said:
why you cant? what error did it give you? might you dont have drivers installed on your pc?
Click to expand...
Click to collapse
ODIN MODE
DOWNLOAD SPEED : FAST
NAME: SM-G950F
CURRENT BINARY: CUSTOM
SYSTEM STSTUS : CUSTOM
RMM STATE: PRENORMAL
FAP LOCK: OFF
OEM LOCK : OFF
SECURE DOWNLOAD: ENABLED
SW REV. CHECKFAIL(BOOTLOADER) DEVICE :2 BINARY :1
I can ONLY boot into download mode.
When switching on the phone , I get the Galaxy S8 logo by Samsung with the red writing on the top:
"Only officiall released binaries are allowed to be flashed"
Flashing original firmware via ODIN just fails.
"Complete (write) operation failed !!" is the error in Odin.
I tried different versions of Odin , original firmware and boot loaders suggested on XDA. All just fails.
So my phone is just dead.
I had the lasted firmware on ( OTA update about a week ago)
I installed TWRP now , roooted with Magisk , all was fine untill I rebooted the phone.
So drivers and all are fine , everything worked until I rebooted the phone.
Please help. What to do now. I need my phone !!!
PLEASE

TWRP custom recovery installs but shows "cannot boot normally" on recovery mode boot

TWRP custom recovery installs but shows "cannot boot normally" on recovery mode boot
Hi, my device is Samsung Galaxy Note 3 sm-n900k (korean). I tried to flash custom recovery (twrp). These are the steps I followed:
-> Went into developers mode and checked USB debugging.
-> Went to security and disabled reactivation lock.
-> Downloaded latest Odin (v3.13.1).
-> Downloaded latest TWRP (twrp-3.2.3-0-hlte.img.tar).
-> Flashed TWRP with odin and Odin showed Pass.(I put my device into download mode did everything suggested in a thread )
-> then I tried to boot in recovery mode but , a message at the top of the screen was displayed in red color : "cannot boot normally".
Please help. Did I do something wrong? Thanks in advance.
twrp FOR 900K ??
JJEgan said:
twrp FOR 900K ??
Click to expand...
Click to collapse
Yes. I downloaded it from twrp site. I am not allowed to post a link so the page I downladed it from goes like this:
twrp site -> Searched Samsunge Galaxy Note 3 -> Samsung Galaxy Note 3 (Americas, China, Europe & Korea) (hlte)
Try older twrp
Or read the identical threads .
https://twrp.me/samsung/samsunggalaxynote3qualcomm.html
Actually I have already tried about 8 older versions. Upto " twrp-2.8.7.0-hlte-4.4.img.tar " because the official site mentioned they update to support newer devices, I even tried using older version of Odin, also hit many similar threads. But there is very little thread for sm-n900k and reagrding this problem of TWRP not booting even with successful installation. But thanks anyways.
Try Philz Recovery or CWM if installs you can flash twrp zip

Categories

Resources